Petzl connect adjust and dual connect adjust review 

Been using the standard connect adjust for a while. It’s really great. Costs an arm and a leg for what it is though.

Try out the connect vario you can change the length of the fixed arm I like it for that and also you can make it long enough to use as a second tether

Knots on rope is preffered than stitches

I have a Kong slyde setup on my harness now. Used to have it setup as a dual connect adjust, but recently switched to only having one strand to clean up my harness a bit. It costs a fraction of the price compared to the connect adjust, but giving yourself more slack is a bit less smooth compared to the petzl one in my experience. Maybe you could get that one in your comparison as well.

I've got both the petzl and the edelrid. The edelrid is much easier to adjust under load I've been able extend with one hand while hanging in a controlled manner, but harder to extend when unloaded. The biggest issue with the edelrid is you must use the correct biners otherwise it will slide. So far I've found that only ovals work

Great comparison! I have the Dual Connect Adjust and I definitely share your opinion that it's rappel extension strand feels a bit too long... Also I find it to be very bulky so I tend to not use it as much.

Hey Ryan. Great review. I've recently switched to the single connect adjust from the Metolious anchor chain. I love the adjustability, and the ability to then lengthen the anchor to test my rappel setup. I've found myself just grabbing a sling though, to extend my rappel, which I didn't do before. Seeing you clove in for that was kind of a game changer for me. Application here will generally be the semi-rare single pitch route that you need to rap off of instead of lowering. I can see how the dual would be better in a multipitch situation.

For dynamic lanyards there are also Climbing Technology Tuner and Rock Empire Pip on the market. I have been waiting for someone to do a comparison review on all of them ;)

I don´t personally like to trust only one point of anchor - this case the belay loop - for anchor myself and attached my rappel set up...... I prefer redundancy as much as I can...

I prefer a Purcell Prussik. Less weight and bulk, more versatile.

This is a rare occasion of RU-vid recommending the right kind of channel for me. I've so far watched 8 videos and will probably binge your entire channel over the next couple of weeks.

Cool demo ! Can’t wait to see you compare the Camp and Edelrid products.

Pezl adjust is a great piece of kit, I’ve been using for around a year.

I'm using a kong slyde on about 3.5m of dynamic rope, attached through my tie-in points with a rethreaded bowline - with the slyde on one arm for my PAS and my ATC/rappel biner on the other, terminated with a figure 8.

I quite like it for via Ferrara too

I have used the PAS for years but like this system a lot. If I chose one it would be the dual.

Ryan,

Thank you so much, great video!

Nice video. I personally use alpine batterfly for abseil setup with my connect adjust. I don't like how clove hitch rotates a bit the whole setup. P.S. gotta try the locking quickdraw solution. Thank you

Looking forward to the follow up video! I only see the petzls around me, so I am curious how the Edelrid and camp compare.