Peugeot 206 stabilizer/sway bar link replacement 

Thankyou very much :D ! I'm happy to hear that you found that clear, it's very encouraging. I wish you luck for the job but you should be just fine ;).

Hello ! I'm glad you find my videos helpfull. i'll try and do more ;¬) ! Salutations from the south of France.

You're welcome, hope it will go well for you. If you lift both wheels at the same time the sway bar will come of very easily ;¬).

Hi Gus, thanks, you're welcome ;¬) !

Thanks ! Will do if I have the opportunity to !

Hi Juan, glad and I can help you out through my videos ;¬) !

no, thx u :D

Thankyou ! You're helping quite a lot yourself so I'll subscribe too 😉 !

Thanks very much ! :)

Thanks, glad you like it :¬)

Thank you, my pleasure !

You're welcome, cheers 😉 !

Hi, you're welcome ! Glad you found it usefull ;). You don't have to do a wheel alignement after a sway bar change.

Haha ! Thanks ^^, France.

Rogério NDJr - No it's not needed because of the stabilizer change, BUT if the stabilizers are in need of change most probably other parts are also on the their way out (bushings, ball joints, etc.) meaning that you should at least check the wheel alignment. A good flat strait road it's good to evaluate. Be aware that most roads have a slope to either side, so choose wisely. Your tires also show quite well if anything it's not perfect. ;-) Based on that you can decide to do it or not. Be well.

Hi. Thanks so much for your info.

No worries ;¬)

No worries ;) !

OK, tanks for the tip ;-).

You're welcome 😉 !

Hi, I had the same problem on an other car. I recommend you buy new links because if they poped out once it's only a matter of time before they pop out again. It's pretty easy to change, use a long screwdriver or something else to lever the rod balls out of the heads. Use some pliers to put the new ones easily in place.

Oh ok, thanks. I'll get them on the weekend. Do I need both the long and the short links?

Ok thanks. Should I get both long and short links or can I still just get the bushes? I noticed that the links are not holding & i used cable ties to hold them together tight for now.

I did the same thing at first, cables to jold them together ^^. If you want to have peace of mind replace the long and short ones. It's not very expensive and will save you the hassle of doing it later.

Ok will definitely do. Thanks again!

Hi, do you mainly do short distances ? If it's the case it could be the problem. The catalytic converter needs to be at a certain temperature for a certain time to work efficiently. If you can, do a long drive with it and see if it can solve the problem.

my shortest drive distance is 30 km which i do normally every day of the week.. if the weather is hot outside, the car makes the noise as if the ac is turned on(but its not) and temp goes above 100 sometimes.. i hve changed the coolant as well but no work.. i have tried longer distances as well but no use as the car broke down twice in a week now.. any idea? thanks for reply

OK, maybe your water pump is getting tired but first check the engine fan. Does it turn on when the temp goes up ?

i have no idea bro where it could be, but i will surely google it and check if its working and then will tell you.. do you have any videos regarding that?

Sorry, I don't have a video concernaing that, the 206 is not mine so I don't often fix things on it. You should find waht you need on the net. Good lick.