Тёмный

Peugeot 307 Not Starting / BSM fault / Read description !!  

AMP Garage
Подписаться 3,5 тыс.
Просмотров 75 тыс.
50% 1

Hi there , in this video we have a patient peugeot 307 1,4 gassoline from PSA group who decided to implement the main relay in one piece of hardware, so the relay it's not removable ...so they say, in reality you can resolder or replace the relay with a little patience. In the video example i decided to only resolder the dry joints. First thing that you have to check it's the 12v supply from ignition coil, if the 12v it's not there, you can bypass directly 12v to the ignition coil and start the car, do it on your own risk. The problem can occur also when the engine it;s at working temperature and you can experience random engine stops or stall. This is as usual , a quick tip to guide you in the right direction, the rest is up to you ! Don't be shy and give a thumbs up and subcribe if this helps you !! Thank you ! A more in depth approach on a citroen c4 you will find it here ‪@LMAutoRepairs‬
Music is created in Fl studio , this is my soundcloud page
/ amp-pug

Авто/Мото

Опубликовано:

 

14 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 36   
@LMAutoRepairs
@LMAutoRepairs 3 года назад
Nicely done! 👍👍👍
@amperugarage
@amperugarage 3 года назад
Thank you 🙏
@Bounty-Hunter69
@Bounty-Hunter69 Год назад
LM Auto Repair@ This is completely unnecessary to do. You should mount an external relay, there are here on youtube which fuses you should use. This way is way too advanced...
@LMAutoRepairs
@LMAutoRepairs Год назад
@@Bounty-Hunter69 There is always other ways, depends how neat and professional you want to be, or, how much the owner is willing to spend... I have in the past by passed internal relays with external relays, I have videos on my channel explaining just that... 👍👍👍
@amperugarage
@amperugarage Год назад
@@LMAutoRepairs you are the man ! I would love to meet you .
@LMAutoRepairs
@LMAutoRepairs Год назад
@@amperugarage ☺️ 👍
@dominicbarne5218
@dominicbarne5218 3 года назад
It’s nice to see someone willing to pull one of these apart to repair rather than replace, I’ve got a shelf full of these all working fine for quick replacement but I still like to strip inspect and repair just for my own satisfaction, nice 👍🏻
@hjalle74
@hjalle74 3 года назад
Do you possibly have a BSM-L02-00 that you could sell me? Ship to Sweden?
@arthunterns
@arthunterns 3 года назад
I hate that BSM thing. First of all, on the heavy rain this summer, got water in engine bay. Over the battery and water got in BSM compartment. I couldn't start a car, multiple errors. Then I found a used BSM(same model and numbers). Connected and car started immediately. It was fine for about 4-5 months, untill we again had around 7 days of light and moderate rain. While driving, I would get ABS/ESP, handbrake error when braking. But, car would go normal, I thought it was ABS sensor or something. But two days later, car just shut down, on its own, and pulled handbrake. I was able to start it again, went for 500m, where while idle car again shut down. I wasn't able to start it, starter was working but I guess no fuel was coming. Then it started again, then same story. To make a story short, very dangerous that car just switch off during driving. You could get a serious injury, I lost a power steering. Anyway, in garage, they used Lexia/Dialbox and they were able to set it all again. They recalibrated gearbox, car now runs fine. But, the problem is with that BSM thing.
@shazreenshahrul1821
@shazreenshahrul1821 Год назад
U change the bsm and problem solved ?
@markthompson1134
@markthompson1134 Год назад
my peugeot has no power at fuel pump i think relay has gone fuses are ok where do you get the heat gun and solder iron from to do the job
@fuzzs8970
@fuzzs8970 3 года назад
Thank you for sharing your work. What did you do to repair the ECU? Just reflow some dry joints? Thank you again
@atomichawk3720
@atomichawk3720 2 месяца назад
My dipped or dimmed headlights are not working. The main beam is working but the normal light for night driving is not working anymore. Can I switch a LO4 unit with a LO3 unit? Or which relay is for the dimmed headlights? Greetings
@alexe610
@alexe610 3 года назад
Thank you very much for sharing.
@amperugarage
@amperugarage 3 года назад
Thanks for watching !
@1nfiniteloop
@1nfiniteloop 3 года назад
Awesome video. Gives me hope that if anything else goes wrong with my Peugeot, I can try to fix it :) What did you spray on the circuit boards? WD40? Something else? Resin? and how did you seal the electronics box? Just with a heat gun? something else?
@amperugarage
@amperugarage 3 года назад
Spray with isopropyl alcohol and clean, try to put it back with the soldering iron or glue gun, your choice
@nighthawkflyer
@nighthawkflyer 2 года назад
Would be better to change the Relais. The contact inside is burned. The resistance will produce heat and the solder joint breaks again.
@juliocesarparionavilca6071
@juliocesarparionavilca6071 Год назад
Thanks a lot it's a great video! I have a peugeot 307 and my problem is that the car takes some minutes o attempts to crank the engine until it wasn't it more so I diagnosticed starter, transponder, contacts on key even I decided to starting engine with by pass on starter and then the problem is alternator isn't charging the battery
@juliocesarparionavilca6071
@juliocesarparionavilca6071 Год назад
PD: Sorry for my English grammar
@amperugarage
@amperugarage Год назад
It s hard for me to diagnose based on what you telling me, try check fuses.. maybe you shorted something.
@joseluisojeda3522
@joseluisojeda3522 3 года назад
muy bueno saludos desde argentina
@latelierdeludixo6917
@latelierdeludixo6917 3 года назад
Awesome ! 👍
@amperugarage
@amperugarage 3 года назад
Thank you !
@TheCyrax60
@TheCyrax60 2 года назад
My 307 doesn't power up in the morning, usually after disconnecting all cables from the fusebo and replugging after a while, it powers up but starting it will be a problem. If you then remove the starter fuse and replace, the car will start. What is the problem? Is it the fusebox or something else? This morning, all efforts to start it was non effective. The car is just sitting outside. Dead.
@florentinamarin7140
@florentinamarin7140 3 года назад
Up up 👌👌👌
@markthompson1134
@markthompson1134 3 года назад
where do you get the soldering irons from
@curiousboy4245
@curiousboy4245 3 года назад
If I change the ecu kit (Bsi, Bsm, Ecu and the key system from another Rcz will I still need a programming procedure..)
@amperugarage
@amperugarage 3 года назад
The car will start
@rammacaliphate
@rammacaliphate 3 года назад
I got the same problem on a 307cc 2.0l, cranks but won’t start. All sensors tested fine.could it be the same problem?
@amperugarage
@amperugarage 3 года назад
I think so, measure the 12v reference at ignition coil connector
@curiousboy4245
@curiousboy4245 3 года назад
Hi hope you doing good I would like to know what is the difference between BSI AND BSM..
@sibbsmahachi2420
@sibbsmahachi2420 2 года назад
Where are you guys
@Smok_HB
@Smok_HB 3 года назад
😎😎😎
@oldman1026
@oldman1026 3 года назад
Why this idiotic music concert ?
@amperugarage
@amperugarage 3 года назад
😂😂😂😂 sorry for inconvenience . 🙏🏻
Далее
WHICH SODA CAN FLY THE HIGHEST?
00:48
Просмотров 9 млн
Recuperação da BSM
6:15
Просмотров 100 тыс.
Ремонт BSM Peugeot Citroen
23:59
Просмотров 41 тыс.
BSM Citroen/Peugeot - naprawa.
17:58
Просмотров 37 тыс.