No video :(

Phantom 4 Pro DJI | Gimbal Camera Ribbon Flex Cable Replacement | Gimbal Replacement | no video fix

Подписаться 1,1 тыс.

Просмотров 1,1 тыс.

50% 1

DJI Phantom 4 - NO IMAGE - Probably a flex cable issue | Phantom 4 Pro Gimbal Strip Repairing Flat Cable
Repair Parts For P4
Phantom 4 Flat Cable standerd - s.click.aliexp...
Phantom 4 Flat Cable advanced \ pro \ pro v2.0 \ rtk - s.click.aliexp...
Yaw Motor advanced \ pro \ pro v2.0 \ rtk - s.click.aliexp...
Used Roll Motor advanced \ pro \ pro v2.0 \ rtk - s.click.aliexp...
Used Pitch Motor advanced \ pro \ pro v2.0 \ rtk - s.click.aliexp...
Used 4s Pitch Motor Standerd - s.click.aliexp...
Yaw Arm advanced \ pro \ pro v2.0 \ rtk - s.click.aliexp...
4S Yaw Arm Standerd s.click.aliexp...
Roll Arm advanced \ pro \ pro v2.0 \ rtk - s.click.aliexp...
4S Roll Arm Standerd - s.click.aliexp...
Camera Frame advanced \ pro \ pro v2.0 \ rtk - s.click.aliexp...
Camera Frame Standerd - s.click.aliexp...
Bottom Cover advanced \ pro \ pro v2.0 \ rtk - s.click.aliexp...
Camera advanced \ pro \ pro v2.0 \ rtk - s.click.aliexp...

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 5

@princebhai9902 Год назад

Chalo koi to h jo drone repair karna bta rha h thanks bhai ji

@Razertw 11 месяцев назад

What if I have the opposite issue? Image is good and everything is working, just can't move the gimbal, it's limp. Can replacing the flex cable help? I never crashed it so the gimbal motors should be fine, I just used it extensively near the ocean in a lot of sea spray and it got some splashes.

@mrdrone1212 11 месяцев назад

Did it pass the gimbal calibration. I think it should work if you change the ribbon cable

@Razertw 11 месяцев назад

@@mrdrone1212 Yes tried everything. It's been like that for a while. That's what I thought at first, but the more I looked into it it might be the yaw and roll ESC board, the ribbon might be fine since I do get video image. App also says yaw and roll gimbal error. The problem is apparently the new ESC board needs to be specially calibrated otherwise it won't work. Will probably just start with the ribbon replacement and will see from there 😀

@princebhai9902 Год назад

Apna mob no bhi dena bhai ji