No video :(

Pimoroni NVMe Base for Raspberry Pi 5 Hands-On

Подписаться 4,7 тыс.

Просмотров 17 тыс.

50% 1

This is the Pimoroni NVMe Base for Raspberry Pi 5. After booting Raspberry Pi OS from an NVMe drive, I won't be going back to SD cards.
Buy the Pimoroni NVMe Base Here:
shop.pimoroni.com/products/nv...
The NVMe SSD I Used in the Video: amzn.to/41U4WuL
External Enclosure for NVMe Drive: amzn.to/41Ta82b
#pimoroni #raspberrypi5
My Gear
Sony a6400: amzn.to/2tO272R
Rode Wireless Go: amzn.to/3jjn7F3
K&F Concept Tripod: amzn.to/2vnaX8k
Sigma 30mm f/1.4 DC DN Contemporary Sony E-Mount: amzn.to/2UKvQVI
Sony 16-50mm f/3.5: amzn.to/31OR862
Some product links are affiliate links. This means if you buy something, The Channel will receive a small commission.
Want to send me something?
1821 Hillandale Rd Ste 1B # 185
Durham, NC 27705

Опубликовано:

8 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@omgubuntu 6 месяцев назад

You’ve sold me on it! Appreciate you showing how to assemble it all too ❤

@PlayingItWrong 6 месяцев назад

Subbed because you are to the point and very consistent. I'd sooner you add midroll ads then make your videos needlessly longer, very impressed with your work.

@JayDubster 6 месяцев назад

Great vid Jason, covered all the bases for us lot 👍

@Zardoz66 6 месяцев назад

nice video Jason. thank you for the content.

@Druac Месяц назад

Thanks for the hands-on review...Just ordered this...looked at all the HATs out there and didn't want any of them because I want a large tower cooler on mine.

@thornbottle 6 месяцев назад

Just got mine today and had the Gigabyte NVMe 128GB M.2 Solid State Drive, via USB and enclosure before and wanted a neater setup so got the base and holy S**t it boots up instantly, I never expected this at all. Thanks for your video on the setup required to boot from it.

@corneliusilli2395 6 месяцев назад

Thanks a lot for the video .... and it's sooo fast now.

@thegreeneyej 6 месяцев назад

And bench mark other SSD with that base. Glad to see they added little rubber feet in the kit.

@Druac Месяц назад

I can report that the TEAMGROUP MP44Q 1TB SLC Cache Gen 4x4 M.2 works. I also got it installed with the full install of the GeeekPi ICE Tower Plus cooler...just had to order some longer M2.5 screws.

@yakacm 6 месяцев назад

Just got mine a couple of days ago, and it does heavily increase the usability of the Pi. It gets to a point were, you have the NVMe base, the active cooler, the case, battery CMOS back up, and you might as well just have a PC, lol. I think it is having a bit of an identity crisis.

@erreyth 5 месяцев назад

Case where you can also fit the nvme base with the official active cooler?

@martinh9099 4 месяца назад

A mac mini m2 makes much more sense, I know it costs more than an Pi 5. But performance is vastly better, plus it looks pretty cool - A pi 5 together with the compoents to make it half useful look pretty ugly

@rjelkins 2 месяца назад

Excellent and simple. Can you recommend an enclosure that this finished installation is compatible with? I am flexible on cooling: I can use the "official" cooling separately or go with a case that has a solution.

@paulselby3629 6 месяцев назад

Thank you for the video on Pimoroni NVMe Base for Raspberry Pi 5. I'm new to your channel. I only found one case that fits bottom NVMe boards for Raspberry Pi 5, but I guess we will see more in the future.

@PlayingItWrong 6 месяцев назад

I'm hoping argon made a BOTTOM NVME expansion for their One BRED CASE. Until then I'm just using a poor quality Ugreen nvme enclosure I got to use as a thumb drive.

@user-ks9fg8fj5w 6 месяцев назад

There is one on Printables that I made

@iam.jasonhoward 6 месяцев назад

Which one is yours? I’ve seen two models on Printables.

@ParkerGraysonNZB 6 месяцев назад

Could you update us on how the heat on the NVME effects tempts on the pi. I was totting up between this hat or the pineberry and I ended up going with the pineberry because the nvme was bottom facing which was better for air flow and the heat would be dispersed outward and not into the bottom of the pi

@donald1792 6 месяцев назад

nice vid bro

@starfireprime3666 6 месяцев назад

Just an FYI - I received my Pimoroni NVMe and it functionally works fine. However, the placement of the mounting holes caused the edge of the NVMe board to extend just beyond that of the PI5's edge. That made it impossible for me to fit the two boards into a case that expected the boards to be flush. Fortunately, the board has very few traces and I safely expanded the mounting holes with a drill bit edge so that I could slide the NVMe board back enough to fit in the case.

@cjlowe1650 6 месяцев назад

Just got my first one for my pi5 4gb. Waiting for 2nd for my pi5 8gb. Argone one SSD runs great on my Pi4 8gb. Let you know how this runs. Thanks for the video.

@dwalinfundinson 6 месяцев назад

I have the same Sabrent enclosure. :D

@MillisecondFalcon 6 месяцев назад

It's great to see the pi supporting nvme as it will make the platform more appealing. I know it's still early days for pi 5 and it takes time for supporting hardware to get released. But if you were looking for a fully passive case to house a pi 5 with an nvme ssd and preferably with an external WiFi antenna, not USB (would that mean including a CM4 too?), where would be a good place to look? There's lots of mini pc cases and barebones systems with these features but none that I can see for the pi, yet anyway. Though I guess that's because there are so many different pi boards out there.

@iam.jasonhoward 6 месяцев назад

It sounds like you need the LattePanda 3 Delta.

@MillisecondFalcon 6 месяцев назад

@@iam.jasonhoward Thank you! That looks like a versatile system. Believe it or not, since watching your video I saw this one of possibly exactly what I'm looking for. I hadn't considered Nvidia Jetson or other boards before but this might actually be ideal. I'm looking for something for astrophotography that's more affordable than the ZWO Asiair, which is good but overpriced, imo. It turns out the Jetson has some dedicated libraries for astronomy and astrophotography so I might consider it. Even though it's more expensive it could be very worth it. More research needed. Thanks again! 🙂 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--imhL0oETSQ.html

@GRCDriver23 Месяц назад

curious if this works with the Pibow coupe 5

@maxgood42 6 месяцев назад

Good idea , is the ribbon cable long enough to use slightly longer stand offs for a NVME heat sink ?

@iam.jasonhoward 6 месяцев назад

Unfortunately no.

@maxgood42 6 месяцев назад

@@iam.jasonhoward Maybe Red Shirt Jeff can make it fit 🤣

@nigellester7625 5 месяцев назад

Great video but is there a case available that can hold the nvme board and pi5 ?? I have just got my pi5 and nvme but not managed to find a case yet

@iam.jasonhoward 5 месяцев назад

Pimoroni has not released a case for it yet. There are cases you can 3D print. Check thangsdotcom and search “pimoroni nvme base”.

@Wildersport 3 месяца назад

Great video. Can this be done within Ubuntu?

@iam.jasonhoward 3 месяца назад

Yes it can.

@pamanes7 6 месяцев назад

I think I'm gnona cut a slit on the official case to feed the cable through and then run the nvme board underneath it.

@pamanes7 6 месяцев назад

nope, doesn't fit, need a case.

@pcread 5 месяцев назад

I got mine a few weeks ago. It's up and running and is so much faster. Does anyone have a link to a case that fits? I hear Pimoroni might be coming out with one, but when?

@iam.jasonhoward 5 месяцев назад

I haven’t heard anything yet. But if and when it does come out, I’ll buy it.

@misu22b 2 месяца назад

about to ask the same, i saw on internet some custom print designs but nothing on market :(

@IoSonoAndreaZ 5 месяцев назад

is there any nice case to protect the raspberry after mounting this base?

@iam.jasonhoward 5 месяцев назад

There's a few that you can 3D print.

@tigerman76 4 месяца назад

what case fit whit Pimoroni base?

@iam.jasonhoward 4 месяца назад

No official one yet. Plenty that can be 3D printed.

@ianpage7022 4 месяца назад

Yes please do kali

@demondeader 6 месяцев назад

Hi have you done home assistant yet?

@iam.jasonhoward 6 месяцев назад

Not yet.

@benjaming.4623 6 месяцев назад

are you still able to stick that into the official raspi case?

@iam.jasonhoward 6 месяцев назад

I don’t have to officially Pi 5 case. But, there is a case you can 3D Print for it. Search “Hot Toddy” on the Printables website.

@cjlowe1650 6 месяцев назад

I have official pi5 case. Will let you know when I get time to install it.

@thegreeneyej 6 месяцев назад

Awesome. Test , compare it against the Pineberry Bottom “hat” M2 SSD.

@ParkerGraysonNZB 6 месяцев назад

i second this

@iam.jasonhoward 6 месяцев назад

The NVMe Base and Pineberry HAT function the same. The only difference is the Pineberry has an optional redundant power supply.

@ParkerGraysonNZB 6 месяцев назад

but one has the nvme facing upwards towards the bottom of the pi and one faces outwards. would be interestong to see the effects off head and air flow between the two@@iam.jasonhoward

@iam.jasonhoward 6 месяцев назад

@ParkerGraysonNZB Okay. I'll order one whenever they announce the next batch. I have a top NVMe hat from another company on the way. Be on the lookout for that video next week.

@ParkerGraysonNZB 6 месяцев назад

love the commitment! super interested to see if the inward or outward placement has much effect on the pi or drive from the heat@@iam.jasonhoward

@SeptienPatterson 6 месяцев назад

Retiring SD cards??? 👀👀👀👀

@Renull55 6 месяцев назад

Lets see Ubuntu/Kali/Manjaro

@nikobellic570 6 месяцев назад

I'm interested to know why youtube streaming would be faster with nvme ssd. That's all processed in ram and cpu/gpu

@iam.jasonhoward 6 месяцев назад

It just is. 😂

@donald1792 6 месяцев назад

the browser's cache is not stored in ram, which is what speeds up loading different pages of the same website

@pamanes7 5 месяцев назад

Do not buy any WD Black NVME drive, not compatible, throws lots of errors, get the Samsung 980 Pro instead, works like a charm.

@laurentitolledo1838 6 месяцев назад

interesting...however....RPi5 DOES NOT EXIST (where am at) (but will definitely get one if RPi5 falls from the heavens)😉

@martinh9099 4 месяца назад

It's a compete piece of garbage. The catch on the PCIe port is one of the flimsiest things i've ever seen, mine dropped off after gentle touch...the whole unit is now in a landfill

@iam.jasonhoward 4 месяца назад

Did you try to return it?

@martinh9099 4 месяца назад

@@iam.jasonhoward Thanks for asking, I couldn't be bothered with the hassle and just binned it. I've put the SSD dive into a Gigimondo USB enclosure and it's happily working with my mac mini