Тёмный

Pioneer TS-WX130DA Compact Slim Active Subwoofer - INSTALL (2/3 Install Series) 

VideoShowMeHow
Подписаться 34 тыс.
Просмотров 524 тыс.
50% 1

In this video show you how we install a Pioneer TS-WX130DA Compact Slim Active Subwoofer. The TS-WX130DA is extremely compact and slim, and is designed to be installed in various small, tight spaces where conventional subwoofers cannot fit. ✅ amzn.to/37gOckB With the ability to fit under seats, behind seats or inside small storage compartments, the TS-WX130DA features a wide range of vehicle applications.
✅ Buy the Pioneer TS-WX130DA - amzn.to/37gOckB
Checkout the other videos in this series:
- Unboxing Video here: • Pioneer TS-WX130DA Com...
- Sound Test Video here: • Pioneer TS-WX130DA Com...
The subwoofer combines a built-in 160-watt class D amplifier, deep throw woofer with aluminium cone specially designed acoustic suspension enclosure, and Digital Bass Control, a proprietary technology developed by Pioneer to tailor frequency response and increase the performance, the TS-WX130DA is compact while producing deep, solid bass.
• Aluminum Cone Designed for Compact Body
• Built-In 160 Watts Output Class-D Amplifier
• Digital Bass Control (Selectable Bass Mode: Deep or Dynamic)
• Wired Remote Control (Gain, LPF, Phase, Bass Mode)
------------------
📱 Socials
------------------
I▶ www.videoshowmehow.com
I▶ Instagram - videoshowmehow
I▶ Facebook - videoshowmehow
I▶ TikTok - videoshowmehow
-----------------------------------------------
👍 About VideoShowMeHow
-----------------------------------------------
⏩ What's with the gloves?
Not after any RU-vid fame here which is why I'm not in the vids - they're not about me they're about the how-to! I used the gloves for the first couple of projects I filmed which just happened to be messy ones and it kinda just became a thing - easy to spot my videos! If that's not your thing and you'd prefer to watch a face, all good, I won't be offended, there's plenty of better looking ones to watch already on RU-vid ;)
⏩ Where did this start?
I really enjoy tinkering with different projects - they usually require a whole bunch of research and learning along the way. It's satisfying on doing a thing and standing back and going 'Yeah! Totally did that!'. I had a bunch of mates asking 'how did you know how to do that?' and 'I couldn't never do that myself so I thought; I need to start something where I can help others that might be thinking the same thing :)
⏩ What will you find here?
The purpose is simply to make these videos as top quality and helpful as I can. They will always be free, there's ZERO agenda and the only motive is to try and upload what I would want to watch to help with that particular project. I'm also keen to keep building this little community and will try to answer all questions when asked - fire away :)
#videoshowmehow #pioneer #tswx130da #underseatsubwoofer #compactsubwoofer
Disclaimer:
If you click any of the product links above and end up purchasing anything I get paid a small commission (not charged to you). This is one of the ways you can support the channel :)
VideoShowMeHow assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not VideoShowMeHow. VideoShowMeHow cannot guarantee against improper use or unauthorised modifications of this information.

Опубликовано:

 

14 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 446   
@VideoShowMeHow
@VideoShowMeHow 3 года назад
CHECKOUT ALL THE SUB VIDEOS HERE 😃 -> ru-vid.com/group/PLloptHW8MGGi6OHQv1W2MdR_0EepwMh69
@hortiboi
@hortiboi 2 года назад
I’m installing this sub tomorrow and going into it with no anxiety at all thanks to your videos. Thanks 👍🏻
@harriskhan3096
@harriskhan3096 3 года назад
The most simple and clear tutorial on RU-vid for this 🙏
@fahadkhan5307
@fahadkhan5307 6 месяцев назад
Finally I got some useful video on youtube to install subwoofer
@Chitown388
@Chitown388 3 года назад
FYI, if your head unit doesn't have pre-amp RCA output, the TS-WX130DA can take the input from the speaker wires. I tapped the rear left and right door speaker wires, convert the speaker wire to RCA using a speaker-to-(male)RCA adapter, and finally, connect those RCA cables to the subwoofer.
@adampearce9666
@adampearce9666 2 года назад
Any ideas on how to have two of these at the same time I’m really struggling
@beamtweez1210
@beamtweez1210 Год назад
@James Evans that’s what I wanna know? Did it work for you? Left for 1 sub right for the second?
@harryhayes2048
@harryhayes2048 Год назад
@nhatqtran that's great to know, thanks for sharing. I'm just wondering does this then affect the rear speakers volume? Or do they still operate as per usual? Cheers!!!
@Chitown388
@Chitown388 Год назад
@@harryhayes2048 I'm speculating that the tap doesn't affect the sound of the tapped speaker since the subwoofer is only using that tap as a sound signal, and not using it to power the subwoofer speaker. The amp in the subwoofer drives the subwoofer speaker based on that input sound signal.
@rcvdecals1892
@rcvdecals1892 Месяц назад
Thanks guys. Is this signal from the rear speakers enough to give it the low frequencies? I doubt my factory NP300 head unit will have RCA cables
@antoinebugleboy
@antoinebugleboy 5 лет назад
You can splice the subwoofer into your speaker wires from your head unit. You don't have to use RCA outputs. From Crutchfield: . "If you're connecting to a factory radio (or a radio without RCA outputs), you can cut the RCA plugs off of the input harness and splice it to the speaker wires." I did the exact same thing with another active subwoofer box and it works fine.
@antoinebugleboy
@antoinebugleboy 5 лет назад
Also, if you use speaker level input, you won't need to use a remote power wire. "Note: If you are using speaker-level inputs, the amplifier will automatically turn itself on when the head unit is turned on. When the head unit is turned off, the amplifier will turn itself off."
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
Top tip 👍
@ACERASPIRE1
@ACERASPIRE1 4 года назад
RCA are superior
@BeZzeMa
@BeZzeMa 4 года назад
Do i need Speaker to RCA converter for that option?
@elmwd
@elmwd 3 года назад
I just installed this sub, cut off the RCAs and wired the input cables to both rear speakers. The sub wouldn't power on though. Ran a remote wire to the accessory wire and it powers on but extremely low volume. Changed the input switch to RCA and all of a sudden it works perfectly sounds great. But my car has an auto door locking feature, and now when I start driving and the doors lock, the sub pops, the volume drops and the signal sounds messy. Any advice would be appreciated, I've tried everything i can think of!
@uprightjim
@uprightjim 2 года назад
Great video! However" you should have mentioned this unit does "not" come with any RCA connectors! You'll need to purchase those along with a Y adaptor if your going with RCA and not spk method 😀
@ldh2851
@ldh2851 2 года назад
Excellent video, clear, easy to follow; just need to figure out the wire to positive terminal and good to go! 👍
@001jetman
@001jetman 5 лет назад
Thanks man. Actually saved this. Going to buy and install this weekend if I can. Great video. I may do a video on 1998 Merc because the battery is in the bloody boot. In some ways it makes it easier though.
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
Nice, cheers man 🤟
@sparkyspark1582
@sparkyspark1582 2 года назад
Can't decide between the kenwood ksc-sw11 and this pioneer TS-WX130DA? What do you think I should go for ? Love your video by the way
@VideoShowMeHow
@VideoShowMeHow 2 года назад
I prefered the Pioneer
@umangu
@umangu 4 года назад
I just installed this in my 66 mustang. Incredible how it sounds now!! Needed to go in the trunk but I really feel it up front.
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Nice! Would prob have a bit more boom in the trunk as well :)
@umangu
@umangu 4 года назад
Video Show Me How More than enough! I put sound deadener everywhere, but I have to figure out how to stop the springs underneath the backseat from vibrating!
@tomf4608
@tomf4608 Год назад
I ordered this sub. Fantastic video. I don't have the blue lead behind to power the sub.. any suggestions?
@VideoShowMeHow
@VideoShowMeHow Год назад
You can connect via speaker signal method, I do an install this way for the Kenwood install on the channel (they're almost identical)
@tomf4608
@tomf4608 Год назад
​​@@VideoShowMeHowhanks for the reply. I've got the RCA cables connected fine. Ended up connecting the blue to ant amp (another forum said don't use that one though so I was hesitant) and ended up connecting the yellow to a 12v cigarette live. All working so thanks
@the_garage
@the_garage 4 года назад
Going to connect a MDB aw-10e compacted sub to my corolla soon. Will upload a video as well. This one helps me lot to clarify some issues with regard to my installation. Thank you
@deryck6789
@deryck6789 3 года назад
Great job. Thorough explanation. Had to go through many videos before I found yours which is a complete explanation. Thank you.
@VideoShowMeHow
@VideoShowMeHow 3 года назад
👍👍
@chrgon2321
@chrgon2321 3 года назад
I admire how you tucked those wires.
@Leto4900
@Leto4900 Год назад
Thanks At least i learned how and where you connect that blue wire coming out from my aftermarket unit. I'm using with it a separate DSP but it looks it needs more settings adjustment. The bass is lower than i expected.
@Luna_Kat1983
@Luna_Kat1983 5 лет назад
I had one of these installed under my seat. Wondering if it's normal to hear a buzzing sound when music is off?. Has a great sound for the size. I'm pleased.
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
No buzzing from mine? I would check to make sure it is turning off when you turn your stereo off.
@Luna_Kat1983
@Luna_Kat1983 5 лет назад
@@VideoShowMeHow the light goes off when I turn my car off and the buzzing also goes away . I had a shop install it for me 🤷‍♂️.
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
Sounds like you might be getting interference from somewhere (non shielded RCA cables running too close to power cable). Perhaps take back the install shop? Best of luck!
@Luna_Kat1983
@Luna_Kat1983 5 лет назад
@@VideoShowMeHow thank you:-)
@jamessouthworth1699
@jamessouthworth1699 2 года назад
I was surprised to hear the Alan Walker track as your test track. Nice!
@kushhatkar
@kushhatkar 3 года назад
Such a easy install you did there man!!
@Mattsretiring
@Mattsretiring 2 года назад
Nice video. Thanks. One question though: did you require a 2:1 RCA lead? Looks like you went from red/white to a single black connection? Cheers
@VideoShowMeHow
@VideoShowMeHow 2 года назад
I did yes (head unit only had a single RCA out), this will dependant on your headunit. If no RCA you can always use the speak wire signal option, I cover this install method in the Kenwood sub install on the channel
@clydecycle
@clydecycle 2 года назад
Thanks for the great instructions! As an aside, what sort of head unit is that?
@VideoShowMeHow
@VideoShowMeHow 2 года назад
eBay android special ;)
@nZymes
@nZymes 4 года назад
Just ordered two of the 130EA based off of your videos. Thanks for the content! I'm hoping two of these should be more than enough for a single cab truck.
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Enjoy!
@DarcyDevine
@DarcyDevine 3 года назад
How is it?
@carlosvandergronden9276
@carlosvandergronden9276 3 года назад
Great video! Where did you get the splitter cable thats in between the radio subwoofer plug in and the red/white plugs?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Jaycar but can find online ebay/amazon :)
@enricosv-logtagebuchaustra7615
@enricosv-logtagebuchaustra7615 11 месяцев назад
Question: do you always have to use a Y splitter cable to connect the rca cables to the subwoofer cable on the back of the head unit? Or could you also connect it to the left and right rca?
@benjamin9251
@benjamin9251 3 года назад
Very clear how to. Did you secure it under the seat or it it left loose?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
cheers mate. yep used two of the brackets that came with and used existing bolt under the seat to secure :)
@coughlinjosh
@coughlinjosh Год назад
hey, just purchased this unit and i’m just wondering what cable you ran from the rca out of the head unit to the rca in on the sub is that a Y splitter cable?
@VideoShowMeHow
@VideoShowMeHow Год назад
Yep
@denisbunic9942
@denisbunic9942 2 года назад
Hi awsome video very clear instructions, however the sub out port from head unit you had a black cable that was not in your tray. Did you buy this as a extra?
@VideoShowMeHow
@VideoShowMeHow 2 года назад
Yeah I needed too as the head unit didn't have RCA outputs. An alternative is to use the speak wire (installed it this way in the kenwood one on the channel)
@carljairey
@carljairey 2 месяца назад
Do you need to use the remote or can I leave it unplugged ? Just have no where to put it
@schtekar
@schtekar 5 месяцев назад
High quality how to! Thank you for your good work my friend 🤝
@VideoShowMeHow
@VideoShowMeHow 5 месяцев назад
Cheers 👍
@mariofan402
@mariofan402 4 года назад
I’m getting mine tomorrow and I’m so excited!! I do have a question. I’m a little worried about routing my wire in my engine bay. Do I need to be worried about it melting at all from the heat? Also will normal zip ties be okay in the engine bay? One more, would it be possible to wire my subwoofer power straight to the yellow on my radio? Or is it to many amps and will blow a fuse? Great install video. Definitely the best one out there
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Nice! Thanks for your comment. 1) just keep wire along the sides, no prob. 2) zip ties are fine 3) no you'd need 12v power from battery, it's unlikely you had unit would have enough juice to run 😁 p.s love Mario!!!
@mariofan402
@mariofan402 4 года назад
Video Show Me How Heck Yea I love to see someone else that loves Mario! 😁 No problem for the comment! You are awesome thank you for getting back to me so quickly!
@JoeyDayeMusic
@JoeyDayeMusic 3 года назад
Easiest and most helpful video I’ve found online. Thanks mate 👍🏽👍🏽
@VideoShowMeHow
@VideoShowMeHow 3 года назад
👌
@Shimmersclone
@Shimmersclone 5 лет назад
Yo im your 700th subscriber!! Keep up the great work
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
Woohoo thanks for the support 🤟
@pingchow4640
@pingchow4640 2 года назад
Thank you for the video. Do you have any videos of how to best tuck all the wiring? This is my first install. Thank you in advance.
@MsCh1mp
@MsCh1mp Год назад
Great Video mate. Does it make any difference using gold plated phono RCA? thanks
@VideoShowMeHow
@VideoShowMeHow Год назад
Nah
@MsCh1mp
@MsCh1mp Год назад
thanks
@christophermunoz205
@christophermunoz205 Год назад
Wonder if you could hook up 2 of these up under front seats and reg sub box in trunk
@Mathias13011984
@Mathias13011984 3 года назад
How did you run the power wire with the fuse through the firewall? Did you have to cut the wire and put it back together?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Yes from memory I had to
@joshuabaines1
@joshuabaines1 3 года назад
Hey mate, thank for this. Will be a huge help when mine gets delivered. did you need to buy anything additional to mount the wiring to the car battery?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
No had everything, I think I may have used a different ring terminal but otherwise ok 👍 Good luck with your install.
@nivelfinal276
@nivelfinal276 Год назад
For dual sub, one on each seat , it’s possible to control both with the same remote at the same time?
@VideoShowMeHow
@VideoShowMeHow Год назад
yeah possibly, could use a 3.5 splitter, haven't tested but I think that could work
@WillPoli
@WillPoli 4 года назад
Great video. Would you recommend buying another amp for the speakers even though the sub already has one integrated into it?
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Another amp for the speakers you could, not needed for the sub (powers itself) 👌
@jeremysantosa
@jeremysantosa 2 года назад
Hey mate, I'm planning to install this subwoofer in my car with the stock head unit and a line output converter. How should I adjust the gain on the line output converter or the best setting for this sub ? Like the gain, frequency, phase and bass mode on the remote as well. Thanks !
@gday79
@gday79 2 года назад
did u use a y connector to connect the sub RCA ? there are also left and right out for the RCA, do u just leave them out ?
@joshbickerdike4084
@joshbickerdike4084 3 года назад
Great vid, is there any way the power can be ran to the fuse box instead of going to the battery?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Thanks! Yeah you could, would just need to find an open spot that could handle 10 Amps
@joshbickerdike4084
@joshbickerdike4084 3 года назад
Awesome, thanks mate!
@antonclarke
@antonclarke 5 лет назад
Great video - thanks, one question with the RCA connection - did you have to purchase additional length of cable as the cable supplied is only 100mm long
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
Hey mate, cheers. No I didn't it ended up being more than enough for me with the sub under the drivers seat. If you were mounting it elsewhere aka the trunk/boot you'd need to get another longer one
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
@ekim andersom assuming he meant 100cm :)
@antonclarke
@antonclarke 5 лет назад
@@VideoShowMeHow No the cable supplied with my unit (just purchased) only had a 10cm (100mm) RCA cable so we needed to purchase a longer RCA cable.
@DanDan-dn5lt
@DanDan-dn5lt 5 лет назад
Hi Did you purchased extra RCA cable to enable you complete your subwoofer installation? The rca cable supplied with my sub woofer is too short as well. Please let me know. Thanks.
@antonclarke
@antonclarke 5 лет назад
Dan Dan yes it cost me about $11 for 5 mtr cable and it did the job
@beccummins7930
@beccummins7930 2 года назад
Hi mate one question how how did you secure the sub under the seat or is it fine just to sit it there
@VideoShowMeHow
@VideoShowMeHow 2 года назад
Yep secured with the tabs that's come with the unit
@rahullbadhan4347
@rahullbadhan4347 5 лет назад
Hi, great video :), i installed a portable sub in my car, when the car is in accessory mode or in idle the sub sounds pretty good, but once i start driving the sub sounds really weak, any idea on what might be affecting it. Installed in a Toyota Camry
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
I would prob suggest the extra road noise etc makes it seem less loud. I guess these are never going to be the same as a bigger sub and amp... Maybe you just need a second one 😁
@rumblinstillkid2023
@rumblinstillkid2023 4 года назад
As I just mentioned Camry I saw this. Hm
@andywilson4836
@andywilson4836 2 года назад
Can you do a video for this on the 21 dmax
@pianoman6639
@pianoman6639 3 года назад
Can I install this to my existing car amplifier ?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
No need, had built in. You could link to the remote wire though saving t you digging for on ✌️
@smithc6891
@smithc6891 4 года назад
Great video one question though i bought a car witch has the sound system wire it it for a monster but want to know if i can re use any of it
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Thanks 👍 You might be able to use some of it, I'd recommend checking out what wires go where, might save you needing to route new ones
@keepsmiling1484
@keepsmiling1484 2 года назад
Hi - very interestting video - I’ve just purchased the pioneer subwoofer. On my head unit I have a single wire only which is labelled subwoofer line out, so was wondering how I can connect that to the 2 RCA connections supplied with the amplifier. Much appreciate it if you can help to provide some guidance, as at a loss how to do it.
@VideoShowMeHow
@VideoShowMeHow 2 года назад
You can connect via speaker wire, checkout the Kenwood install, shows this method 👍
@keepsmiling1484
@keepsmiling1484 2 года назад
@@VideoShowMeHow Thanks alot for the super quick response - much appreciated 👍 That clears the point in my mind now to be able get the install tackled - super video!!!!
@mogasesegopotje8483
@mogasesegopotje8483 2 года назад
Do you also hook up your existing car speakers on this amp?
@Hezath
@Hezath 3 года назад
Hey mate, enjoyed the video. Any chance you have the brackets that you didn't use left over and mind sending them to a fellow Aussie for some beer money? Just inherited one of these from a friend but it was missing those brackets that I wouldn't mind using. :P
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Thanks glad it helped! I've literally just uploaded the install vid for the Kenwood version of this, has the same brackets I may still have! Let me check for you if I do happy to post to you for nothing 👍 Let you know in a day or two 🤞
@Hezath
@Hezath 3 года назад
@@VideoShowMeHow legend! I'll check that out as well. Great content you've got here. 👌
@Hezath
@Hezath 3 года назад
@@VideoShowMeHow haha how'd you get on?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
@@Hezath hey bud sorry yes I do have them! Email me your postal address and I'll mail them to you?
@courtjames8510
@courtjames8510 3 года назад
Legendary
@EmiratiAuto
@EmiratiAuto 5 лет назад
i dont have AMP CON wire in my head unit but i have the ACC wire (red wire) ,can i connect my amp to this wire to remote start it when i turn on the car ? does this ACC wire do the same job as AMP CON ?
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
Possibly. Get a test light, connect to it and turn your ignition to acc mode and confirm there's power. You could connect using the speaker connect as mentioned in a previous comment as you then don't need this wire.
@LobbyDaLobster
@LobbyDaLobster 3 года назад
How did you mount the sub? Did you just sit it there or drill holes in the floor?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Used the brackets that came with the kit and used existing bolts under the seat 👍
@LobbyDaLobster
@LobbyDaLobster 3 года назад
@@VideoShowMeHow cheers! Thanks for that!
@artificialmustaches
@artificialmustaches 4 года назад
Thanks for the video! I am in doubt on how to fix the sub woofer to the floor under the passenger seat without removing the seat ... Can it be done? What' is your method on doing so? And since I would like to install it as in the video, with the RCA cable -shielded, can it go along with the other cables or they'll produce noise? Thanks for the help!
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Hey thanks for the comment! 1) I used the brackets that came with the sub and some existing bolts under the seat. I've only attached one of them and has been fine so far even 4wding 2) I would recommend shielded RCA like you said and you 'should' be right. Maybe don't full tuck everything away until you test to see if you get any noise so then you can adjust in need
@artificialmustaches
@artificialmustaches 4 года назад
@@VideoShowMeHow I hope not to have audio noise, otherwise I will have to separate them and make a hole in the carpet to get the cable out of the central tunnel, which I'd rather avoid! Thanks for the help, much appreciated!
@blakesatt3857
@blakesatt3857 3 года назад
Do they come with everything that is needed to install?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Yep sure do. Depending on your head unit you may need an RCA splitter
@halcyonspree1523
@halcyonspree1523 Год назад
i just installed the latest model of this pioneer it still sounds great. But for some weird reason i wasn't able to power it on. i am using a android headunit and it gives me a two plugs one that is dedicated to the left and right audio and power and antenna. The other one is RCA harness that has the sub and aux and external mic attachment. I notice that the harness has a blue wire says amp con, assuming this is the wire to attach the blue and white from the pioneer harness. I had tried it and it does not seem to power on. Then i decided to power it through the accessory wire then it works. am i suppose to tap the accessory wire or not?
@VideoShowMeHow
@VideoShowMeHow Год назад
Yeah it will need a signal to tell it the car is on so tap an accessory wire that's only live when the car is started
@halcyonspree1523
@halcyonspree1523 Год назад
@@VideoShowMeHow great thanks for the help. Also regarding the mount of the sub i asumming the bolt just diggs strightbto the floor of the car?
@VideoShowMeHow
@VideoShowMeHow Год назад
Have a watch of the kicker video just uploaded last week, I show some options
@letsgo6574
@letsgo6574 2 года назад
Hey guys with the remote turn on wire, something is already connected to it. Can I just use a connector that allows for two connections from the remote turn on wire?
@VideoShowMeHow
@VideoShowMeHow 2 года назад
Yep will be fine. Draws bugger all power, just needs to see a little current to switch the amp on
@davidgomez5116
@davidgomez5116 4 года назад
Car manufacturers should just have this preinstalled... Edit: obviously as an option. I know they got Bose and Infiniti speakers upgrades but subs are still always missing
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Completely agree!!
@marksjdejong
@marksjdejong 3 года назад
Every car I have owned has had a sub. 03 Tiburon GT 8" rear sub, 08 G37s 2X 10" Bose door subs, 09 FJ cruiser 8" rear sub. None of these cars are that expensive, most higher trims of cars have an option for a subwoofer.
@davidgomez5116
@davidgomez5116 3 года назад
@@marksjdejong a legit aftermarket option though I'm sure the ones that come with cars are pretty shatty or it might just be a bigger speaker that they use as a subwoofer but it's not built to be a subwoofer like the aftermarket ones are
@marksjdejong
@marksjdejong 3 года назад
@@davidgomez5116 they definitely were all subwoofers, proper cross overs, dual coil low ohm rating and a separate amp for the subwoofer. Have you been in many cars with stock subs? That being said my FJ had a horrible stock subwoofer. I put an 8" slim pioneer sub that runs off the two stock 30 watt rms toyota amps (it has half the impedance as the stock sub so peak wattage is doubled and pounds, ill make a video on it)
@pawelbanach8989
@pawelbanach8989 5 лет назад
Hi, i had an edge 750 watts active subwoofer but its been taking to much boot Space so i ordered the pionier, the question is can i use the same wiring i had for the edge?
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
Can't see why not, the pioneer is less power than what you had so that wiring should be fine 👍
@johnnyvasiliou3810
@johnnyvasiliou3810 4 года назад
I recently bought this sub and a compact pioneer amp I was wondering if I can connect both the power cables into one wire to run off the positive batery terminal? Will that be safe
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Hey Johnny mate so long as your power wire is large enough it will be fine. Make sure you run the appropriate fuse as well :) Enjoy!
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Wait, you got this sub AND an amp? Assuming the amp is to run seperate speaker?
@johnnyvasiliou3810
@johnnyvasiliou3810 4 года назад
@@VideoShowMeHow yeah the amp is to power some additional speakers that I've added I just noticed that the power wires are a pretty thin gauge so what I was going to do was just connected them togther before the fuse then run a single wire to the battery
@johnnyvasiliou3810
@johnnyvasiliou3810 4 года назад
I got the pioneer gm-d1004 compact amp
@JerChong
@JerChong 4 года назад
Hi, is it really necessary to get a 'Y' adapter in order to plug in left & right terminal on the sub? Can I just plug in either left/right? Will it work the same?
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Just depends on your head unit. Give it a shot 👍
@PIN0FUL
@PIN0FUL 2 года назад
Did you try putting in 1 rca cable in left or right or Y cable? How did it work out?
@chrisfordyce7162
@chrisfordyce7162 5 лет назад
Is it best to install it under the car seat or underneath glove box?
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
Wherever you've got the space mate, I'd consider rattles though, if it's resting or up against something it could get a bit of rattle action going which takes about 3 mins flat before being annoying! 😁
@TimmysVision
@TimmysVision 4 месяца назад
Why is it recommended to tap straight into the battery and not a fuse tap?
@VideoShowMeHow
@VideoShowMeHow 4 месяца назад
You're drawing up to 10amps, prefer it's own connection/conductor
@mikeymann6813
@mikeymann6813 3 года назад
Would you recommend it? Looking for one to install in cab of vivaro van??
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Hey yeah goes well. The Kenwood isn't bad either very similar. Have a bunch of videos on the channel on this as well, sound test for this week be up next week 👍
@mikeymann6813
@mikeymann6813 3 года назад
@@VideoShowMeHow Yeah seen that one. Which do you prefer? Few people have recommended the pioneer has slight edge, I'm just restricted for space so these are ideal
@VideoShowMeHow
@VideoShowMeHow 3 года назад
@@mikeymann6813 I would agree with her Pioneer having the edge. Very close however. There's a larger version of the pioneer as well if you want some extra boom. I'm getting together some kit to be able to do some better tests on volume etc. Will be uploading in the coming months :)
@comfortablynumb8832
@comfortablynumb8832 3 года назад
Hi If I wanted to disregard the remote wire do I just join it with a live?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
You got it. Would just need a 12v feed
@Jowdeeroww
@Jowdeeroww 5 лет назад
Hey mate great video! quick question. Would it be possible to tee the power wire into the 12v wire on the headunit itself ? or does it need to go to the battery and why ? Thanks! :)
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
The 12v wire only has a 10amp fuse so you could just wire it into your cigarette lighter socket if you didn't want to go to the battery. With the Jeep I've got all the accessories in the seperate fuse box in the engine bay so that's why I went there 👍
@Jowdeeroww
@Jowdeeroww 5 лет назад
@@VideoShowMeHow that's just the answer I'm looking for! I think you just sold pioneer another unit 😅. Great content. Thanks for the swift response mate!
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
Haha if only I was getting a cut 😂
@KoenvdW88
@KoenvdW88 3 года назад
I've got my TS-WX130DA coming in tomorrow, but I'm just a bit apprehensive when it comes to the yellow wire. How did you fit that through your firewall? I would've thought you'd push the white connector through and then pull blue and black all the way back into the cabin alongside the connector. But in your case the blue was already wired, and there's no way to fit the fuse holder through one of those grommets - or does the fuse holder come off (that'd be a lifesaver for me as well)?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Fuse holder should come off :)
@mitch7455
@mitch7455 4 года назад
thank you for the video. but i can't connect rca cables to my head unit. so I would cut them and put a high speaker adapter in between. but is it enough to only connect the front left / right or do the rear ones also have to be added?
@tobinbaker4837
@tobinbaker4837 3 года назад
All you have to do is strip the audio jacks down to the two wires inside. They're just fancy connectors and any unwanted sound can be phased out with any decent amp
@muzzaball
@muzzaball 5 лет назад
Thanks for a great video and ur thumbs up on the unit. I have 2 x 12's in my car but my daughter doesn't have the room. Hopefully she is happy with the level of Bass available. It sounded pretty good from RU-vid. I like ur EDM and Shuffle video soundtrack!!
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
Ah 2x 12s would be tasty! Especially if pumping out some Melbourne shuffle mixes 😁
@muzzaball
@muzzaball 5 лет назад
@@VideoShowMeHow Love the Melbourne Shuffle vids and sounds. That was actually my catalyst for installation in the first place. Funnily enough, I am running 2 x Pioneer GM-D8604 600w amps, 1 for the Subs and 1 for the Mids/Tweets.
@blewsy8223
@blewsy8223 Год назад
Very helpful. Thanks for the video!
@KC-wo2qe
@KC-wo2qe 5 лет назад
Thanks for the videos mate, I was looking at these on eBay. Quick question, is it possible to run two, one under the drivers seat and one in the rear?
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
Sure could. Would be easy to wire, you could just split the RCA etc. Extra boom 😁
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
In saying that pioneer does do a bigger version that might do the job
@KC-wo2qe
@KC-wo2qe 5 лет назад
Food for thought, thanks for the replies 👍 Look forward to watching your channel
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
@@KC-wo2qe cheers man 😁🙏
@ashleycoggins103
@ashleycoggins103 3 года назад
Great video man doing one tomorrow and you really made it simple 👍👍👍👍
@lilmario0
@lilmario0 2 года назад
Would the sub be fine if I just Velcro tape it under seat? I don't want any drilling done.
@VideoShowMeHow
@VideoShowMeHow 2 года назад
Yeah that'd prob do the job 👍
@lilmario0
@lilmario0 2 года назад
@@VideoShowMeHow Ok thanks. One more question. I notice you put it under driver seat. Is that the ideal place for it as opposed to the passenger seat?
@VideoShowMeHow
@VideoShowMeHow 2 года назад
@@lilmario0 much of a muchness really bud, up to you 👍
@VideoShowMeHow
@VideoShowMeHow 2 года назад
There should be a couple brackets in the kit too, so depending on the car sometimes there's some bolts under the seat you can easily bolt too
@batigolwong83
@batigolwong83 3 года назад
Wanna get one for my Mazda CX-9, but want to keep the stock head look, does the stock one support this sub?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Hey 👋 Unsure on the Mazda head unit but good thing is with these types of subs (is the same for the Kenwood install I did on the channel as well) is you can install via RCA or by using the existing speaker wire. So basically these will work with almost any head unit. Checkout the Kenwood install vid if you want to see it wired using the speak wires way 👍
@CycloneCyd
@CycloneCyd 3 года назад
Howdy, just come across this video (and your channel) because I'm getting one of these subs for Xmas. Thanks for the video, I found it useful. I have two (2) observations to make: 1. you didn't say what sort of tape you wrapped that connection with about halfway thro' (it was speeded up), but it looked very much like PVC tape to me (erroneously called 'insulation tape' by many). PVC tape will unwind and leave behind a sticky horrible mess in no time flat in a car interior. Much better to use heatshrink tube or self amalgamating tape 2. The hands and blue gloves style❗ Very ChrisFix, lol. You even sound a little like him too. Was this deliberate? Rock on 🤘
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Hey bud thanks for the comment! Nope not channeling Chris, to be honest first few vids these were the gloves I had and it just stuck. Plus I like blue 😁 I'm not in any of the vids (as the goal is just to film stuff I enjoy to help others who might be tackling the same projects) so the gloves was just to make it a bit more interesting. Unsure if I sound like him though.. am Australian 😬😃 Enjoy the sub install for Christmas!! 🎄🎄
@CycloneCyd
@CycloneCyd 3 года назад
@@VideoShowMeHow maybe the visuals were playing into my brains hearing?? I was listening on my laptop speakers tho', so sound quality wasn't the 'best'. I'm looking forward to it - my system isn't 'lacking' bass (Hertz EV165.5 in the doors), but I just want to "prop" it up a bit more - I listen to classic rock.
@MangoNizer
@MangoNizer 2 года назад
Can I connect the yellow (+) straight to the head unit or will this blow the fuse? I have a hard time getting the cable from the cabin to the battery you see!
@VideoShowMeHow
@VideoShowMeHow 2 года назад
Recommended to get power from battery as up to 10amps
@MangoNizer
@MangoNizer 2 года назад
Thanks for the quick reply mate. 😉 I just right now tried connecting it straight to the cable for the radio and it actually seems to work! At least for now. Don't know if there will be a fuse popping one day, but then I will take it from there.
@Wise91000
@Wise91000 5 лет назад
Hi... I’m such an amateur when it comes to things like this. I’m worried I’d break something. Okay so... I have a Sony radio and at the back it has left and right ports for an RCA cable. But, it also has a ‘sub rear audio out’ I’m slightly confused by it. Do I just use the left and right ones?
@VideoShowMeHow
@VideoShowMeHow 5 лет назад
All good, it's all learning! The sub out will be for plugging directly to an amp. Good news is you've got options. I would just use the left and right RCA outputs, easiest :)
@Wise91000
@Wise91000 5 лет назад
Video Show Me How Thank you. 😊
@thehappygardener1308
@thehappygardener1308 Год назад
I am using RCA outs on back of head unit but I don't have a remote port, any ideas ?
@Ged187
@Ged187 2 месяца назад
I have one of these but mu problem is since i fix my car removed the negative on the battery and put back on then i turn on the music its not working anymore. I dont know how to bring it back.
@evolnull125
@evolnull125 3 года назад
How long does it take it approximately? 3-4 hours?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Hey 👋 Yeah about that. Just depends how many beer breaks 👍
@evolnull125
@evolnull125 3 года назад
@@VideoShowMeHow and also on skills and tools.
@jordanmcintosh2259
@jordanmcintosh2259 4 года назад
Hey man, just wondering how and where you ran the wires to tidy it all up??
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Hey, mainly just run under carpet etc to keep all tidy 👍
@Killur1
@Killur1 4 года назад
Is it possible to match the clipping(thd) of the sub with my head unit as the gain is controlled via the remote?
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Poss, depends on the head unit
@Chitown388
@Chitown388 3 года назад
The TS-WX130DA has a 10Amp fuse. Instead of connecting the yellow wire (hot wire) to the battery, would it be simpler to connect it to an interior accessory fuse with a 10Amp or higher?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
You could, just you're adding to that circuit that may for example already be using 5amps, sub full draw is 10amp so could be popping fuses. I just have always prefered to run subs direct :)
@Olekrok
@Olekrok 4 года назад
was the black cable splitter at 5:23 included with the sub?
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Hey mate, no I needed to get this 2-1 cable because my head unit only had a single sub output RCA
@Olekrok
@Olekrok 4 года назад
@@VideoShowMeHow yeah its the same with my head unit. Cheers for the answer.
@mattmcilwhan
@mattmcilwhan 2 года назад
Hey VideoShowMeHow, just a little confused by someone else's comment below - running power from the battery and connecting the remote wire means it will not drain the battery when the car's off, right?
@VideoShowMeHow
@VideoShowMeHow 2 года назад
Kinda, you can power via the battery direct but recommend the remote wire is connected to a switch/circuit that is only powered up when you turn on the ignition. This then only powers up the sub when you have the car on and won't drain your battery. Your 12v socket is usually a got spot to piggy back off for this, just check with a test light.
@mattmcilwhan
@mattmcilwhan 2 года назад
@@VideoShowMeHow if I follow your instructions in the video (I've already watched it once haha) I should be good, yeah?
@VideoShowMeHow
@VideoShowMeHow 2 года назад
@@mattmcilwhan yep you're gold 🤘 If you're unsure turn the car off and see if the lights turn off on the sub. But you should be good
@mattmcilwhan
@mattmcilwhan 2 года назад
@@VideoShowMeHow absolute legend.
@skrap5008
@skrap5008 2 года назад
Can this kind of sub burn out an alternator or battery? I own a Grande punto which has a small altenator and i already have aftermarket speakers and stereo. I am afraid of the purchase since i dont want to see any dimming lights or headlights in the car
@VideoShowMeHow
@VideoShowMeHow 2 года назад
Nah will be fine
@xjay3200
@xjay3200 9 месяцев назад
Hey mate. Got it all connected and when I turn the key on there is no light popping up on the remote and it’s not getting any power to the system, yellow wire is running straight to battery black is going to the seat for the ground and blue is going to the back of the head unit
@VideoShowMeHow
@VideoShowMeHow 9 месяцев назад
Fuse in? I'd grab a test light make sure there's power coming to the unit
@xjay3200
@xjay3200 9 месяцев назад
@@VideoShowMeHow hey on the back of my head unit there isn’t a blue wire should I just tap into something else to get the unit to turn on
@VideoShowMeHow
@VideoShowMeHow 9 месяцев назад
Yeah could tap into a circuit that only has power when the car is on. I'd use a test light in your fuse box to find one then use an 'add a fuse' like I've used in the spotlight videos
@MrStanzar
@MrStanzar 4 года назад
Hi. I've installed same underseat sub like yours hook up to my android player which have sub out at the back of the unit just like yours. Everything goes well and the sub turn on when I turn my engine on. But the sub didn't produce bass sound. Only normal sound. I've try to adjust the gain from the remote but seems like no effect at all. What have I done wrong?
@CJCope0
@CJCope0 4 года назад
MrStanzar you don’t have the crossover set properly. You need to filter the audio (low pass x-over) you’re currently running full range through your sub.
@wongweiyuen155
@wongweiyuen155 2 года назад
Hi can it fit under seat for Honda City GM6 facelifted model?
@ryanware6044
@ryanware6044 2 года назад
Hey mate, literraly did everything u did in the vid, yet im still getying no power to the sub? Any advice
@VideoShowMeHow
@VideoShowMeHow 2 года назад
I'd put a multi meter/test light on the connection end to sub just to make sure you're getting power from 12v+ (checked fuse ok?) and the signal wire. Then confirm your earth is good. If the sub powers up I'd then be looking at your signal input to make sure that is correct.
@aussieo684
@aussieo684 3 года назад
Hey mate, I bought one of these subs over a year ago, installed it without any problems and everything was working perfectly. About a month ago the sub began creating really distorted bass when I turned the gain control up more than half on the remote. I've checked the ground, the positive and the plug-ins into the sub. Don't know what to do next as nothing has changed from when it was working well to now. Any idea what might cause distortion at high volume?
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Hmmm hard to say sorry mate. Sometimes when I makes that kind of sound MIT's the sub failing.. still have warranty?
@aussieo684
@aussieo684 3 года назад
@@VideoShowMeHow yeah trying to find the warranty info now. Maybe ill just pull everything out and re install it, hopefully thatll change something aha. Thanks mate
@VideoShowMeHow
@VideoShowMeHow 3 года назад
@@aussieo684 Good luck mate
@kamarulakmal3822
@kamarulakmal3822 4 года назад
the yellow wire can be connected to the power wire from headunit? Is it enough power supply?
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Hey mate, would depend on the head unit but I would doubt it would have enough
@nickmastrandrea223
@nickmastrandrea223 3 года назад
So one green output into a red and white in sub. I am confused. Do I need a y connector?
@future8059
@future8059 2 года назад
Hi =), i am french so its a little bit complicated for me to understand when it comes to the yellow cable. How can i plug it to my battery ? hope you can help me, thank you.
@future8059
@future8059 2 года назад
i have a peugeot 107 by the way
@jbslach
@jbslach 2 года назад
Where the blue remote wire was connected …. Please elaborate 🤝
@VideoShowMeHow
@VideoShowMeHow 2 года назад
To your sub out feed on your headunit
@jbslach
@jbslach 2 года назад
@@VideoShowMeHow Thanks…🤝
@Mastora9
@Mastora9 3 года назад
awesome vid installed mine today great instructions bud
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Cool, they're a decent unit hey
@rafiquee
@rafiquee 3 года назад
Bro, kindly advise me where to buy it’s remote and harness wiring etc, i just got this subwoofer
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Hmmm unsure sorry man, I'd contact pioneer directly
@hortiboi
@hortiboi 2 года назад
Great video, thanks!
@ronin7183
@ronin7183 4 года назад
Superb! Great job and easy to follow tutorial. Thanks mate!! 😂😎🤙🏽
@VideoShowMeHow
@VideoShowMeHow 4 года назад
Glad it helped!
@cosmiccj_
@cosmiccj_ 3 года назад
I can’t find those black RCA cables anywhere...
@VideoShowMeHow
@VideoShowMeHow 3 года назад
Here you are: amzn.to/2OAbqhk
Далее
How To Install Pioneer TS-WX140D Underseat Subwoofer
6:53
How many can you smash?🍫 IB : Florin
00:19
Просмотров 3,2 млн
How to choose car speakers | Crutchfield
8:23
Просмотров 1,3 млн