PodGo: Whats the best way to hook up my PodGo

Подписаться 2,8 тыс.

Просмотров 43 тыс.

50% 1

In this video we discuss the various ways you can connect the PodGO. Everything from Direct to PA/FoH to your FRFR or Studio Monitors and even connecting the PodGo to your Tube Amp!
Any questions please feel free to comment below.
F.A.Q.: What are those buttons on your footswitches? They are footswitch toppers available from amazon amzn.to/2DSK1Sk
Be sure to check out my channel for more tutorials on the Pod Go, Presets and IRs for Line 6 products and much much more.
Check out the Constantine Studios Shop on the Line 6 Marketplace for Presets and Custom IR's:
shop.line6.com/marketplace/?a...
Official Website: www.jasonconstantine.com
Facebook: / jasonconstantineofficial
Instagram: @JasonConstantine
Twitter: @JConstantineLV
Want to hang out with other gear nerds and talk gear? tone? and all things music? Join us on the Gear Uncensored Forum! www.gearuncensored.com
Did you also know I have another RU-vid channel where I discuss recording, mixing and mastering for the Home Studio? No fancy million dollar studio here! Just a guy who's been making records professionally for 30 years showing you how to get the best out of the gear you probably already own!
Come join us on the Constantine Studios RU-vid Channel:
/ channel
We also have a Discord for those of you who want to interact a bit more.
/ discord

Видеоклипы

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 229

@panggun Год назад

1:47 Run into PA system 3:38 To audio interface (PC) 6:35 To powered speakers (monitor speakers) 7:28 Real amp (front input) 9:11 to fx loop return section of real amps

@TheFreeman4955 25 дней назад

Finally! A good overview of how to hook this up! You take someone new to guitar with a small combo amp and they watch a couple hundred RU-vid’s on how great Pod Go sounds and buy one. They watch a hundred videos with guys playing EVH getting studio sounding tones but never actually SHOW any detail of how to hook it to your crappy combo amp, your computer, or your monitor. Either they go into extreme detail on internal switching or something else but never actually show you where to plug in at or what noise will come out if you do this or that input/output. Now I’d like to see a video on hookup of the nice overdrive pedals I’ve got into the PG and get good tones. Thanks for putting this out there! It helped a lot!

@dylanseanhall 5 месяцев назад

thank the lord for this video, the pod go has been nothing but a headache but I feel a bit better after watching this, thanks man

@JasonCGuitarOfficial 5 месяцев назад

Glad it helped!

@dylanseanhall 5 месяцев назад

this video literally saved my pod go live, I was on the verge of just selling the thing but this video changed everything and for the first time since I got the pod im ACTUALLY VIBING with how its making my tone and guitar feel! you da man @@JasonCGuitarOfficial

@JasonCGuitarOfficial 5 месяцев назад

Thanks Dylan :)

@Hatchbackpapii 9 месяцев назад

After the video finished I said to myself “that was a really good video” cheers!

@JasonCGuitarOfficial 9 месяцев назад

Glad you enjoyed it

@ianhanson85 4 года назад

Thanks a million. This answered all my questions. Very nicely done.

@mksounds6326 3 года назад

I bought my Pod Go last week and have been looking for this video ever since. I have an old Fender Evil Twin in the garage that the high-impedance jack is messed up. I was thinking about running the Pod Go into the "Power Amp In" of the Twin essentially making it a 2x12 powered cabinet. Then you mentioned the very technique at the end of your video. You're a genius! Thanks again and keep rockin'! Sick pinch harms, too, by the way. MK

@seven7asable 4 года назад

Finally the perfect video! Thanks for setting up this video exactly what I needed

@Onoins425 3 года назад

Great video. I'm a bit of a technophobe, but was attracted to the simplicity of the Pod Go (I'm a certified plug-and-play man!) This has sealed the deal. I feel confident buying one now. Couldn't find any other vids that cover all the setups, so thanks for your invaluable input, my friend.

@justinTime077 3 года назад

Ugh. Nasty junk junk has no umpf behind that sound tho! This digital generation of guitar players makes me ill. How can any guitar player not live for the rush of feeling the rumble of an amplifier? Weirdos! (I’m a millennial)

@syamlalnarayanan3788 2 года назад

Hi Bro, Do you connecting it straight to the mixer , so , that way we can use it for live performance ? Please help..

@flowride68 Год назад

100%. I'm glad I found this channel.

@demizius 2 месяца назад

i just want to say, im glad you exist. poured through quite a few posts trying to hook my pod go up through my audio interface.. in hindsight i didn't try that hard, but i tried what i thought was obvious. anyway, didnt find how to do it until i came across this vid.. hell yea dude.

@JasonCGuitarOfficial 2 месяца назад

Glad it helped :)

@SeanHyland 20 дней назад

I thought the POD Go is also an audio interface and you can record audio over USB. Isn't this true, and if so, why would you plug it into an interface then?

@emounstron8585 2 года назад

Finally, going straight into center of all, a vídeo of million dollars. Thank you, subscription right now. Just been all week looking for how sound Pog Go directly on Fr studio; What can I say, I like it!

@Lukas-mu2tw 3 года назад

Super informative video. I really appreciate you uploading this man!

@Mojoman57 Год назад

This couldn't have been better. Perfectly explained.

@tillthedaydawns 3 года назад

Awesome clip! Thanks for the virtual tour. Greetings from Seoul.

@MeanMaoriMean555 2 года назад

Thank you sir! With all the rummaging around RU-vid trying to understand stuff I just got THREE ‘penny drop aha moments’ in this one video. Mate that was totally 💯%. Soo appreciated! 🙏

@ladislavmaday4144 3 года назад

Finaly i found practical tutorial and i thank you for this. Everyone just show you tones, but noone show you possibilities how to plug it in. Now i just need choose from line 6 pod go or mooer ge300 lite

@alvaroantonioocampogrey2823 4 года назад

Juust the video I was looking for!! greaat!

@Sensei10238 2 года назад

Awesome video. I was looking for this! Thanks man.

@darwinwhitten8542 2 года назад

Thanks for all your tutorials. I just got a pod go and know nothing about it. Your videos are helping me.

@raphacbreve1368 Год назад

Really helpful video!! Thanks Jason!!

@familytablet9055 3 года назад

Great video very informative and easy to follow explanation

@dondirtcheap2410 2 года назад

Hey Jason, thanks so much. I have been struggling with the 4 Cable Method and my Marshall DSL 20 for weeks. I could not get it to work or get my head around it. Been through the manual and numerous other forum posts. When I saw this video I thought "It can't be that easy", but EUREKAAAAA!!! A few things to mention though in the hope that it will help others struggling. The level of the signal before the Pod Go FX Loop block being passed through the FX Loop must be adjusted by the FX Mono Loop block controls, to get a nice level. My Marshall pedal FX loop switch must be engaged to bring in the effects after the Pod Go FX Mono Loop block. And, very importantly, the level of the effects/signal after the loop is controlled by the Pod Go main volume control. Which muddys the water and threw me a curve ball, as it has no effect on the signal before the FX Mono Loop block.

@dannyheath8876 4 года назад

Excellent tutorial 👍🏻👍🏻

@crazkurtz Год назад

4 cable method is awesome with great sounding amp. You get more than 4 extra effects. You get wah, volume, and boost (eq). That with the 4 additional effects makes it awesome. Not to mention snap shots

@TheTimeProphet Год назад

Thanks. I only have a Roland cube which has no loopback, so at least I know I can plug it in the front end. Just gotta remember to turn off cab simulation. I am getting the Pod go on Monday.

@joshuasimatupang1260 3 года назад

Thank you Jason, very informative video. I got a question. What kind of cables should be used from pod go output to studio monitor? Is it instrumental/audio/unbalanced/balanced cables?

@timothyeads1657 4 года назад

That patch was pretty solid. I was leaning towards keeping my 500X and adding a two notes torpedo to it. This is making me change my tune. I like that you can turn off the cabs on the fly. The 500X, it's not that simple.

@timothyeads1657 4 года назад

HAHAHAHA. That's hilarious. Thanks man for the reply. Going to trade up for it the more I read about it.

@sfkhan570 3 года назад

What a great useful video!

@SaterUnholy 2 года назад

Nice video dude! I’m planning to run my Pod Go to a FRFR speaker and also to the mixer, should i used the 2 Main Outs or use the amp out for one?

@maiksie 2 года назад

Ty for your Video. My amp has a Power amp in also. Could i just put it into that and have the same as if i use the effects return?

@Jymius 2 года назад

Amazing set! Could you let me know if you have same output sound through scarlet plus monitors and pod go directly to monitors? I have headset and I can not get same volume at the end and it's awfully!!!

@craig.encinitas 3 года назад

And if I want stereo out to studio monitors. One cable for left, one for right. Could I use two guitar patch cables out the back of the Pod Go? Thanks for making this video.

@lamgefyoutoob 3 года назад

This was great. Thank you very much.

@stevemoore6349 4 года назад

Fantastic job! Killed it. Btw,,loved the pinch harmonics.lol

@rafaelmorales4288 3 года назад

Does the amp out have a different volume control

@BagusWibisono Год назад

Love you man! This is what i want!

@PostColorGear 2 года назад

Does it just/only bypass the tone controls in the front when using the return in the back? In other words, if I chose to use the amp's distortion and wanted to swap between clean and dirty, does that still work? I don't have an amp to test right now.

@tgdb4968 Год назад

Great stuff, thanks man.

@hierrogm 2 года назад

Great vid …I’m running pod go with to active beringers ….dood the stereo sound on stage is sick …may never use a guitar cab again …but I git to thinking .,what I hook up my active speakers to my Mesa boogie 4x12…gonna try I read it’s totally possible

@uptownphotography 2 года назад

I think you solved a mystery for me. A friend of mine came over with his Pod Go so I could test it out, as I was thinking of buying one for recording. We plugged the main mono output into my Allen Heath analog board via a DI box. It just sounded terrible with over driven and distortion sounds. It was harsh, sounded fizzy with the highs and muddy at times also. I don't think, based on what you mentioned here, that the IR cab was engaged, as I know this unit can sound really good from other videos I have watched. I was super very disappointed I will have to get my friend's Pod Go back over here for another test drive. Thanks for sharing this info as I really would like to get great distortion and overdrive recording direct into a DAW. Phil NYC Area

@uptownphotography 2 года назад

@@JasonCGuitarOfficial Yes, and thanks to your video I saw how you turn it on and off. This has to explain why my friend Pod Go sounded so bad through my recording mixer. Does using the stereo outputs to a mixer's (TRS line inputs) sound the same as using a DI box to a mixer with the Pod Go? Have you ever tried that? Just curious. Thanks.... Phil

@kierandoherty499 Год назад

Hi there. As the pod go has a built in interface, would it be ok just to use that, instead of the scarlet one you showed in this video? Thanks for your help.

@knottsscary 3 года назад

what kind of monitors can ibuy that i can plug directly into? I like playing downstairs sometimes and just wanna be able to plug into some speakers and play.

@jessetate9701 Год назад

Thanks man might get me a studio mono from guitar center and hook up my pod go into it!

@preciseaudioblog 3 года назад

Omg! Jason, imho, you just reinvented the wheel... So, main output from Pod, to return of amp right? Now, could I add a Line 6 DL4 to that set? I suppose it could be connected to the pod’s fx loop right? Thank you?

@deetsugc7311 3 года назад

I ordered one a while ago still waiting ! But can I use it through my boss katana power amp in port

@mananakoa2412 2 года назад

How do you connect to the audio interface from the pod go? I already have the monitors connected to the interface via RCA. My interface has TRS inputs would that be how I connect it from the pod go mains?

@jayblackdogg 4 года назад

Very helpful videos, thanks! I'm planning to hook up the POD GO direct to mixer without a direct box. My question is do you use 1/4 TS to XLR or 1/4 TRS to XLR cable?

@jayblackdogg 4 года назад

@@JasonCGuitarOfficial thanks!

@jayblackdogg 4 года назад

@@JasonCGuitarOfficial BTW it shouldn't be an issue if I do use a TRS to XLR cable right? Can't seem to find one right now

@anasjacobs4130 2 года назад

Hey bro. I have the same amp EVH. What if i want to use both amp for my stage output and at the same time output for front house monitors ? Should i connect DI to EVH output return or to Line 6 pedal ? Thanks a lot for your support. Cheers

@oribushari7995 Год назад

If i have pair of studio monitors for bedroom usage What the setup i need in pod go? And wher i connect the studio monitors? Thanks!

@matteoradi 2 года назад

I have to enter into a mixer but in the meantime a want to monitor myself with an Headrush FrFr, i would llkebto enter into mixer with the Left main Out to control che volume with Pod's volume knob, and i haven't out socket from mixer to the monitor. Can i connect mine FrFr to Amp Out socket on the podGo?

@jeffreytang7434 3 года назад

i want minimal setup cause Im on a tight budget, so no money for amp or pedals or preamps or other stuff I just have a Pod Go, headphone and shelf speakers. can i just plug in my podgo in a power outlet, guitar, and Headphone/speaker and start jamming? or will it sound terrible? also is this a device that I have to connect to a pc/ipad to use?

@khonde_99 3 года назад

Hi Jason.. that's greats Video, may i know the different sound quality between "Amp Out" vs "Main Output" ?, can i implement this same way with POD Go "Amp Out"..? Many thanks..

@jonathanaudelo9135 2 года назад

@@JasonCGuitarOfficial Hay diferencia?

@ChrisDeJuanMusic 3 года назад

Great video man! I'll def be getting a PodGo very soon as I have a bunch of restaurant/hotel gigs coming up... and am planning to plug straight in to a small portable PA so I don't have to lug my amp around for these small gigs! I'll probably plug in to my amp at home for practicing tho and for band rehearsals too... one question, when plugging in to an amp isn't best to use the dedicated amp out? Thanks again!

@ChrisDeJuanMusic 3 года назад

Jason Constantine ah ok cool...thanks for that info!

@rapberry3072 3 года назад

Hello! When plugging the Pod Go in the FX loop of a solid state amp, do I have to turn both of the amp head and cabinet? Looking for your response. Nice video anyway!

@rapberry3072 3 года назад

@@JasonCGuitarOfficial so the amp head on the Pod Go is the only one I should be using?

@pauljackson935 3 года назад

Thank you Jason

@bradmalinowski 2 года назад

Great video, very helpful. One thing about the footswitch toppers,,,, once they are on, you can't get them off. They fit very snugly.

@jessejohnson1375 2 года назад

Please tell me where I can purchase the foot switch toppers ?

@alvaroantonioocampogrey2823 4 года назад

How do you compare M9 vs Pod Go in terms sound quality of the effects?

@wertawonka Год назад

Is the pod go loud enough for live situations? My guitarist is pluging into a fender champion 100 and with all the levels up on the pod the amp needs to be on 10 for it to even start competing with the drums and bass. Are we doing something wrong? We are plugging into the front of the amp

@hernan_93 3 года назад

Hi Jason, nice video and play. I just got my Pod Go this week and I'm running it into the FX return loop of my Marshal DSL 40CR, as far as I know, this way I can use the Amp simulation of the POD Go but I'm not sure about the Cab or IR simulation... in my setup (thru the FX return of the amp) should I bypass the cab simulation or may I used it without affecting badly the resulting tone? Thank you!!.

@hernan_93 3 года назад

@@JasonCGuitarOfficial But in the Fx return I'm using only the power amp part of my DSL40... so I guess, I should use the pre-amp modeling options, right?

@juangallardo6180 Год назад

Hi Jason, do you need a TRS cable to connect it direct to the studio monitor or can you use a TS cable?

@dannyheath8876 4 года назад

Love your videos ! I’m running mine through my amp effects loop per your suggestion and I love it but some clean patches have a faint fizzyness . Do you have any tips on dialing that out ? Thanks man

@dannyheath8876 4 года назад

the tweed blues normal with the la comp in front of amp and just a eq behind the cab

@dannyheath8876 4 года назад

Thanks again brother! It was definitely helpful to back off the gain on my compressor. Keep up the great videos💪🏻💪🏻

@douglasvaughn9349 3 года назад

Thanks for the video. What’s the proper method of connecting my pod go to an frfr speaker? Also when I use a drop d pedal into the pod go it seems to sound low and like crap .

@douglasvaughn9349 3 года назад

@@JasonCGuitarOfficial it’s a digit each drop d pedal I use for down tuning . When I engage the pedal it sound like shit. I’m sure I have it running wrong . Any help?

@mikeiniguez7621 Год назад

Hi, so how do i connect if im not using an amp.. i connect through a direct box.. how do i connect? Also do i turn off the cab/amp off or have them on?

@user-cd9ui4qv4q 3 года назад

Great video. I have a POD GO Wireless, I want to connect the POD go directly into my Focusrite 2I2 using PODGO Main Outs TRS into 2i2 XLR line 1 (Y XLR to 2 TRS cable) then connect my monitors to Focusrite line outputs. Is that the right way?

@user-cd9ui4qv4q 3 года назад

@@JasonCGuitarOfficial worked you the man. Used a y xlr trs cable into to ai input 1. Thanks Jason

@dylancr32 Год назад

you must to use AMP or Preamp (of Pod go) to connect on the Fxloop return? (sorry for my bad english)

@Ultra7165 3 года назад

When you hooked into the audio interface is it recording in stereo? What out do you use?

@AthleticMediaPro 8 месяцев назад

Hi, I am thinking about running my pod go into a pair of presonus eris 3.5 speakers. The speakers have a left and right 1/4 in jack. if i run a TRS cable from the pod to the speaker will i get stereo sound, only 1 monitor or mono from both ? Thanks in advance.

@JasonCGuitarOfficial 8 месяцев назад

You would need a TRS to two TR Y Cable.

@gus3333 3 года назад

very useful! thank you. How can I run the podgo as a VST in my DAW in order to test the presets and make adjustments with a recorded riff? all I can hear from my DAW is the DI by connecting to my interface. I still cant dial a decent metal tone in this toy

@gus3333 3 года назад

@@JasonCGuitarOfficial I believe that connecting the output of the interface to the guitar-in of the pod go, can do a sort of reamp

@TheAjCalvillo 2 года назад

@@gus3333 as far as I know, this is correct, just don’t put any kind of plugins and just run it from the PodGo.

@rodtaylor6064 2 года назад

Thanks dude you rock

@jessejohnson1375 2 года назад

What do you plug into effects loop send of your amplifier ??

@angelmeraviglia6191 2 года назад

Muchas gracias !!! De gran gran ayuda tu video

@jackeerdmans9839 2 года назад

What would you suggest if you don’t have an fx loop on your amp?

@benstrok6045 3 года назад

Jason - I have a POD GO and this was helpful!! One question I have regarding making this POD GO work going DIRECT for LIVE, is..... on a fairly neutral pair of Studio headphones (and ONLY using the Headphone out on the POD GO) I have some great tones going ...but when I use the POD GO's MAIN L-Out (MONO) via a 1/4" instrument cable into a mixer and listen back (on the same headphones) I am noticing a lot of tone loss. ...Is using the TRS 1/4 > XLR, for the INPUT to the channel on the mixer making a big difference tone-wise? mentioned you can use a TRS>XLR as well, and in case I don't have a DI handy would like to use this method. Wondering if just the instrument cable to mixer is resulting in tone loss for me (due to impedance, or cables?) Any advice appreciated. Thanks!!

@benstrok6045 3 года назад

@@JasonCGuitarOfficial thanks for the response! How are you using these modelers in a touring situation then? Do you find if you’re using many amp selections but with 1 or 2 common IR’s that you are able to easily use global EQ to adjust to different venues floor monitors and make that work well? I watched a few videos where you talked about a SS power amp and cab (as a good option) which I may do, but I’d love to know if on the fly global eq adjustments assuming you’re using a common IR works well for ampless night to night use and let the house EQ signal for the audience like normal. Thanks again!

@hashmark13 3 года назад

So if you are running the GO POD into the FX Return on your amp and turn off the CAB SIM in the GO POD.... are you getting the amp modelling?

@hashmark13 3 года назад

@@JasonCGuitarOfficial Sorry to be a bother ...but I dont get it then. Does that not negate the modelling amp? I guess I am trying to understand ...does not the cab sims make the sound? Otherwise we are using our own amp speaker, right?

@bradleywood1499 3 года назад

Hey Jason, other than FB, where can I find your Leona Rythm preset? I don't see it in the Line6 marketplace unless it's part of one of your packages. A gave up on trying to find the Bogren Bald&B IR that goes with it, figured I could use a different 4x12 V-30 cab to get close. Thanks

@bradleywood1499 3 года назад

@@JasonCGuitarOfficial Purchased along with your Mojave 301 package, thanks. Also snagged the Bogren Bald and Beaut IR, it came with 34 additional IRs. Now I just need the family to go shopping or something for a few hours so I can put it all to the test.

@STEVENMICHAELHancock-se5yx Год назад

STEVIE THUNDER I'VE GOT A LINE SIX V AMPLIFIER AND HOW DO I HOOK UP MY POD GO TOO IT TO SOUND GOOD

@syaheer8689 3 года назад

When connecting direct to PA, whats the function of the DI box? Is it really needed?

@MarceloMoraisGuitar 3 года назад

Hey, you have not mentioned that the unit is an interface itself. I plugged into my pro tools on my MacBook and it recognized instantly the pogGo interface . Thanks for the video!

@MarceloMoraisGuitar 3 года назад

Jason Constantine I see, that’s true!

@bigbbrother 2 года назад

shiit man this is awesome thanks!!

@michaelhatcher2329 3 года назад

Hey when you're running into your effects return. Do you use yours in preamp mode or amp mode?

@michaelhatcher2329 3 года назад

@@JasonCGuitarOfficial May I ask why? Seems a little more uncontrollable under amp mode. Also says when running into effects return you should use preamp mode. But your sound is great so I don't doubt you thanks for the reply bro.

@davidordonez8964 2 года назад

I’m connecting my main out from a ts-Ts cable to a Rackmount presonus StudioLive, and that goes to the presonus StudioLive mixer. But I ain’t getting the full sound of the pod go (through the speakers that goes to the audience) as if I were playing the same patch through my headphones at home. What could be wrong with my setup? Pd: I do have main out: precab/Ir. And it’s mono the setup

@davidordonez8964 2 года назад

@@JasonCGuitarOfficial Makes sense, but I couldn’t even hear the delays feedback? I just had a patch with distortion and delay, and I couldn’t even hear the feedback, and the guitar sounded cleaned, not even like distorted. Still the same thing? Cause the delay feedback at least should have sounded

@rickhammel9541 3 года назад

are you using the main out on the pod go or the amp out? does it matter which one you use on a real guitar combo amp? Also, is there a way to turn off all cab sims for the unit so I don't have to keep doing it each time I change a preset? Thanks! great videos!

@stevennetzel 8 месяцев назад

I went back and looked. He had it in the Main Out.

@leeabakermusic 4 года назад

I like the method connecting the Return to the PG and isolating the Cab. But for this to work with my Blackstar amp I have to plug either a cable or headphone plug adapter into the input of the amp. If i dont, i get no sound. I prefer to just use the headphone adapter socket then theres no trailing cable.

@leeabakermusic 4 года назад

Jason Constantine Not your fault 😂👍 Great video by the way.

@PaoloC. 4 года назад

There's another option that is connecting the pod go via usb to the computer and use it as an audio interface, so you got 4 channels to record with. Of course this is pretty much for recording only or if you don't have an audio interface like that Focusrite.

@esticaandres3169 3 года назад

@@JasonCGuitarOfficial Run into issues? What issues? Line 6 website sells it as a fully working interface.

@sabbster1157 3 года назад

AWESOME. I know tube is better. But what would it sound thru a solid state or modeling amp such as a Katana ?

@sabbster1157 3 года назад

@@JasonCGuitarOfficial I want to plug the pod go into the loop of the katana

@thiagomucenecki4883 2 года назад

friend how can i get the preset used in the video...? what is his name to buy? thanks

@tommyk4113 Год назад

can i buy your impulse responses? i’ve purchased a few others and they don’t sound as good as these (5:09)

@christofkraemer743 4 года назад

Thank you very much! What Kind of Studio monitors are you using? Greetings from Germany!

@christofkraemer743 4 года назад

Jason Constantine thank you!

@flowride68 Год назад

Great vid. If you don't mind, a couple questions. 1. Did you run AMP OUT to the front of the amp or did you use the L Mono Out? From what I'm to understand, there is a difference. 2. Have you ever run direct-to-PA and ALSO to your amp/cab for live play? The reason I ask is because if you're running direct, the amp sound won't matter. You'll end up just using it for stage volume. 3. If you have FRFR's, you can also run XLR our to FOH from them. I've done it with the Headrush FRFR 108's a couple of times.

@flowride68 Год назад

@@JasonCGuitarOfficial I've thought about utilizing a Line 6 Catalyst 2x12 as a backup/stage monitor. There's a lot of people doing that instead of the Powercabs.

@madmanRT83 2 года назад

That tone was awesome what amp model were you using?

@erickdiaz6152 3 года назад

If I have a Scarlet Focusrite Solo, which input do I plug the pod go into?

@erickdiaz6152 3 года назад

@@JasonCGuitarOfficial ok thanks. Some people say to use "balanced" 1/4" cables, is that correct?

@sneakerjoe23 4 года назад

I didn’t think it sounded bad with the cab turned on going through the front of the amp. Definitely sounded better through the effects loop though. How do you feel about the powered speakers Line 6 sells to be used with helix and this?

@sneakerjoe23 3 года назад

Jason Constantine I want to build a practice setup for home with the PodGo but don’t want to spend too much money on an amp or speaker for it, any recommendations under $500?

@ericvoelzke2246 2 года назад

I know this post is old, but just ran across this. I like your tone, do you have any patches you sell, or any settings you would give up? I like my pod go, trying to get a good rhythm tone...

@ericvoelzke2246 2 года назад

Thanks!!

@aresuricardo4178 3 года назад

Thank you 👍

@jamesmitchell2804 Год назад

What output on the Pod are you plugging into in order to line it into an interface?

@DiegoMartinez-op8pt 4 года назад

awesome!

@bustanorms2028 2 года назад

I cant sound good direct to PA,do you think i need to use i.r.?does it make difference in sound,but when i use to audio interface ,it sound good

@syamlalnarayanan3788 2 года назад

@@JasonCGuitarOfficial Sir , to connect it directly to the PA ,do we need a Direct box. Is IRd means a direct box? please help

@coryruest 3 года назад

would this sound ok with a single JBL 305P

@logancipparone596 3 года назад

reallly stupid question here - what kind of cable do i need to run from my main outs of the Pod into my KRK monitors?

@logancipparone596 3 года назад

@@JasonCGuitarOfficial big thanks!

@micklouie 2 года назад

Jason what if I want to run to FOH and also have an frfr behind me on stage. I have harbinger v2312 powered speaker. Where do I hook that up too? I don't want to lose pedals in the process. I was told keep distortion in front of cab and delays after cab. So don't want to move cab around. I would like to have some stage volume with my other players. I'm really confused. Mike

@micklouie 2 года назад

@@JasonCGuitarOfficial Thank you for the advice. I like your viedos very cool. I also learned to set the volume knob to control the amp only so I can adjust to my taste. Pretty cool unit. I am having som backlase from a sound guy who doesn't understand the idea of the podgo. He still thinks I need to run it into an amp. PA's are not used for guitar sounds he says. I think my podgo sounds good out of a PA. I played a couple places and it turned out well.

@micklouie 2 года назад

@@JasonCGuitarOfficial so I played a gig Friday and the sound guy had a XLR cable and no DI box. So I used the amp out to my harbinger v2312. Then he connected the XLR to back of my speaker. It sounded good but was the correct way to connect? I tried to discuss with him but you know sound guys. They know best.

@dominicjamero9762 2 года назад

Hi Sir. How do you route cables from pod go to foh in a stereo set up. 😊 TIA

@dominicjamero9762 2 года назад

@@JasonCGuitarOfficial , thank you so much Sir!

@t.scholz4848 2 года назад

Hello Jason, New Podgo user and thank you very much for your Videos. Sorry major bone head questions. I have a Mackie mixer with 2 Powered SRM 450 speakers. Most of the stock presets sound like crap so I purchased some killer sounding presets for clean, crunch, lead etc. They still dont sound good. I am ready to go back to an amp. Can you tell me the best way to connect direct to my mackie board. I have 1 or 2 TRS quarter inch to XLR cables so I can run mono or stereo. I will buy whatever cables are necessary to make this sound good. How would you hook it up? 2) sorry, slow guy, you said to turn off the cabinet response on the podgo. can you please tell me how to do that. I am not technical and I couldnt see what you were doing to turn it off. I am hoping by addressing both of my questions I can get back to some killer sound running direct. My other guitar bandmate has another modeler that sounds awesome direct to my PA so I know I am doing something wrong on my podgo. thank you for your help! Tom

@t.scholz4848 2 года назад

Thank you so much for your quick response and expertise. I will give it a shot tomorrow. Best Tom,@@JasonCGuitarOfficial