I have a 03 Polaris sportsman 500 H.O. and I replaced that carb with an aftermarket one, it has compression and it’s getting fuel (there was not old gas in the tank) but the engine won’t start. So far as I’m researching on RU-vid you have been the best so far. I have tried using starter fluid, that didn’t work. I’m also only using premium gas. And I don’t have people to go to for help, except for commenting on RU-vid videos. But in conclusion help me 😂
Thank you for all you videos, with the help of your videos and from others I was able to narrow down the cause of my 700 efi to the computer causing stalling and backfiring. Now I can't get my hands on a computer nowhere.
Love the blue color, have 2 blue Sportsman's 600's 04 and 03 which just got a 700 transplant. The 600 in that broke a connecting rod. I'm assuming from hydro lock.
We are working on a 2008 Polaris 500 Sportsman touring. The ADC line is missing. Do you have a video on where the line goes to and how to bleed the system after running the new line?
i was wondering if you could give me ideas on why my hub won't lock in The magnetic coil works and the amateur plate sticks great I have tried just about everything. I swapped hubs back and forth I even swapped the Helix clutch back and forth for some reason. just on the right side it won't lock
I need to buy a new carb and fuel pump for a 2000 Sportsman 500, but I’ve heard a lot of complaints about them being jetted too small. Do you have a good source for these carbs that you haven’t had any issues with? Thanks
I need help and someone smarter than me. I have a 2009 Polaris sportsman 500 efi that back fires through the throttle body and will not run. I have good spark, fuel, compression and I pulled the covers to check timing. The timing is good, the key way on the crank as well as the chain and sprockets look great. The valve clearance on both intake and exhaust are 0.006. They also move smooth. I have not pulled the cam, it didn’t sound like a cam issue to me. Could it be the the crank position sensor or the ecu. Any body have any suggestions for me? Thanks
@titaniumman garage I got a buddy that has a 700 sportsman twin I would really like to pick your brain about I’ve been trying to help him fix and have run into a wall on