Polishing pontoons to protect from corrosion and keep them looking great for years to come!

Подписаться 10 тыс.

Просмотров 262 тыс.

50% 1

New method video finished: • Polishing pontoons Par...
I've been polishing customers pontoons with this method for some time now, and I've always been happy with the results, and customers have been thrilled also.
I've found a new method I'll be making a video about later, but for now, this is a good way to start off your summer! Get your aluminum in tip-top shape with a nice polish to keep it looking great for years to come!
Key things in video:
0:00 Introduction
1:08 Pressure washing starts
1:50 Why you don't use muriatic acid, sulfuric acid or other acids without corrosion inhibitors
2:45 Acid wash starts
5:37 Polishing starts
6:34 Finished with above water line
8:11 Before/After
9:00 The new method comparison.
Affiliate Links:
Here are some links to products we used in this video on amazon in case you want to try this:
StarBrite Aluminum Cleaner/Restorer: amzn.to/2vA96K1
Gallon size Concentrate cleaner: amzn.to/3r5lWQO
Box-O-Scotchbrite pads: amzn.to/2vITUup
Dewalt DWP849X Polisher: amzn.to/2PFNzc0
“New Way” (Zephyr)
Complete kit with 10” pads, rouge and mounting hardware: amzn.to/36IGlfK (Best deal really)
8” kit: amzn.to/33yd8lK (Phenominal price, 8” pads will require more RPM for the same result)
Yellow 8” pad & rouge: amzn.to/32sIrwS
White 8” pad & rouge: amzn.to/2PYd0Yy
Mounting hardware: amzn.to/2p19QbA
“Old way” (3M)
Wool Pad: amzn.to/2PJkRav
3M Polish: amzn.to/2PJVHbq

Авто/Мото

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@trythistv 10 месяцев назад

New way: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VN7by9gs5G0.html Affiliate Links: StarBrite Aluminum Cleaner/Restorer: amzn.to/2vA96K1 Gallon size Concentrate cleaner: amzn.to/3r5lWQO Box-O-Scotchbrite pads: amzn.to/2vITUup Dewalt DWP849X Polisher: amzn.to/2PFNzc0 “New Way” (Zephyr) Complete kit with 10” pads, rouge and mounting hardware: amzn.to/36IGlfK (Best deal really) 8” kit: amzn.to/33yd8lK (Phenominal price, 8” pads will require more RPM for the same result) Yellow 8” pad & rouge: amzn.to/32sIrwS White 8” pad & rouge: amzn.to/2PYd0Yy Mounting hardware: amzn.to/2p19QbA “Old way” (3M) Wool Pad: amzn.to/2PJkRav 3M Polish: amzn.to/2PJVHbq

@skeeterbelmont 4 года назад

Great video. Thanks for adding!!

@davekana8388 4 года назад

Liked and subscribed, looking forward to the next pontoon new method, thanks, Dave!

@Maynardd 3 года назад

Very informative, Thank you.

@patrickphippspa584 5 лет назад

Always a joy to see your contributions. I have an aluminum van, specifically a 1964 Lynn Airvan with a Dodge chassis, 225 slant six and three on the tree that I polish from time to time and this caught my eye. Thanks for taking the time buddy!

@trythistv 5 лет назад

I've been super impressed with how they turn out. I'm excited to see how this boats polish lasts as it stays in the water year round, I suspect it'll be far better than just an acid wash which seems to improve the look for about a month or two in what I've seen, seems pointless to me to go through the trouble of washing and doing all that work just to let it go back to how it was. I know my wheels I polished on here have held up great

@davekana8388 4 года назад

Those slant six 225’s are great engines, should run forever, so simple!

@beandipnchips4502 3 года назад

This is an underrated video.

@laurefeld8340 3 года назад

Thanks so much. I am using the Polishing sticks now and was thinking there might be an easier way, but I can see that this is the way to get that "shine" that I am looking for.

@trythistv 3 года назад

It is a bit time consuming for sure. Once it's done you'll be the envy of the lake though!

@trythistv 5 лет назад

Something went wrong this morning with this video apparently. I had uploaded it thursday, got the thumbnail and description done, and scheduled it for 9am friday. I proceeded to go about my day, and my phone said it was public, but on another one of the youtube app pages it said it was still scheduled, and on my PC it just plain said it wasn't scheduled to be public ever. So now it is. Sorry for the delay!

@zigysilas3784 5 лет назад

sharkhide could be a great protection coat, it works great

@trythistv 5 лет назад

I've heard good things about sharkhide and will definitely be trying it the next time I clean something!

@Harlanmote 4 года назад

Chrome and mag wheel polish is all you need buff it on buff it off last a long time. It’s made to clean and polish Aluminum.

@tadeowill3585 2 года назад

i guess im randomly asking but does anybody know a method to log back into an Instagram account..? I was stupid forgot my account password. I appreciate any tricks you can offer me.

@colejulio1337 2 года назад

@Tadeo Will instablaster :)

@tadeowill3585 2 года назад

@Cole Julio Thanks for your reply. I found the site through google and I'm in the hacking process atm. I see it takes quite some time so I will reply here later when my account password hopefully is recovered.

@Rbhawk3rd 4 года назад

What about the other side of the tubes?

@leonkorotenko406 3 года назад

You need to watch the pros on youtube polish pontoons and diesel tuck feul tanks. Evans is one of the top. There are others though. Not meaning to criticize but, we all begin somewhere, and then we finally get it right. God bless.

@curtm6867 4 года назад

U need a cutting wheel polisher and jewelers rouge It’s kinda a 3 step process of 3 different rouge bars. U could make those look like a Mirror! Best of Luck

@trythistv 4 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VN7by9gs5G0.html I have tried it and man you are correct, it works so much better!

@southtexasbassattack4 Год назад

I recommend blue magic polish cream It’s the best thing for aluminum guaranteed I’ve been doing polishing for seven years and this stuff maid me a ton of money

@trythistv Год назад

I will have to check that out and give it a try sometime! Thanks for the reccomendation!

@mcarthur692 4 года назад

Lol. I was wanting to chastise you on your choice of metal polish and then I got to the end and heard what you said.. white diamond is what I'm using. But who knows.

@trythistv 4 года назад

Yup, I did the 3m stuff and then learned about the rouge bars and that style of polishing and I'm totally converted. Such better results with less work and potential for mirror quality with similar time working on it

@baldomerolopez6788 4 года назад

Awesome job. Very informative. But do you alsohave to polish the inside of the pontoons?

@trythistv 4 года назад

You could, I've usually just done the visible portions as that was what my customers have wanted, it would be quite a chore to get underneath to polish them too

@troyb9609 4 года назад

After you polish it wipe it down with sharkhide clear aluminum coating. It will stay. Shiny forever It's a clear coat for Polished aluminum you can spray it or wipe it on with a cheesecloth.

@trythistv 4 года назад

I've been hoping to do another boat soon so I could try the sharkhide, it looks like a impressive product

@timgarrett4906 3 года назад

What about your Grass??

@dennisreynolds6915 5 лет назад

You seen like a cool dude

@trythistv 5 лет назад

Thank you! I think I've got enough interesting stuff I do that could entertain people on here, just gotta get better about actually filming all the stuff I'm doing!

@chriszbodula1894 4 года назад

Can you send a link of the new product you mentioned you used to get the higher shine?

@trythistv 4 года назад

Absolutely! I'm getting around to making the video about it, but time is not being kind at the moment. Here is it: amzn.to/2MiF3zH Its a little faster in my opinion, but is a very different product to use than the 3m and wool pad.

@trythistv 4 года назад

New product video is here in case you're still curious: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VN7by9gs5G0.html

@Maynardd 3 года назад

Question, how do you get the inside of the pontoons?

@trythistv 3 года назад

With great difficulty and in my case a very sore back the day after lol. With a tritoon it's incredibly hard, with just 2 toons walking hunched over underneath is reasonably doable, but no fun

@timgarrett4906 3 года назад

Also did you do the inside of the toon? I assume no issue to the carpet bunks and trailer?

@trythistv 3 года назад

I did as much of the inside of the toons as I could, and I have noticed no side effects on the grass from the wash or the polish chemicals, the carpet on the bunks tends to get ruined when pressure washing, especially as it ages and gets kinda brittle for lack of better terms, but if you're careful it's not bad at all

@KnowJesusKnowGrace 4 года назад

So how would I get to the middle toon on a Tri-toon?

@trythistv 4 года назад

With much misery and frustration, or a crane and removing either the inner toon or both outers. Any way you look at it, doing all sides of a tritoon is going to be a ton of work. I generally tell anyone that we do everything that is going to be visible when the boat is cruising down the lake, and beyond that, the price jumps massively.

@csinalabama 3 года назад

I decided to use the Sharkhide system and it worked well. Spray cleaner, polish and then the preservative coating. Looks like new but more white than yours. Still, it looks good for a 25 year old boat.

@trythistv 3 года назад

Very cool! I've been wanting to try the sharkhide system, it seems like a quality product, I'm curious how the coating will hold up!

@csinalabama 3 года назад

@@trythistv the reviews I have read say 2 years in full sun, 3 to 5 out of the sun. It takes about half a can to do the whole boat. If you follow their instructions on how to put it on it looks very nice and really brightens the metal and adds a shine. My problem with other systems was that the pontoons would look good for a short period then quickly oxidize, even with wax.

@tedconder9254 2 года назад

What is the black streak on the bottom half? I would want that gone too.

@trythistv 2 года назад

The one about halfway up the toons is some water scale buildup. I didn't do it in this video but now if I polish a boat I sand off the scale with a da sander and then polish so there is no line.

@aaronritzenthaler 4 года назад

Where’s the new method video?

@trythistv 4 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VN7by9gs5G0.html

@ashthomas249 4 года назад

WTF man? You left the most grubby part unworked. The water line! You left the freakin water line man!

@trythistv 4 года назад

You're absolutely right. I should have sanded it off knowing what I do now, at the time my customer mainly wanted them cleaned, I asked if I could polish them too for basically the cost of the materials on top of pressure washing and the acid wash. At some point I will likely pull it back out for service of some kind and I'll clean it all up for him with the new knowledge I've gained since I made this video!

@ashthomas249 4 года назад

@@trythistv - You still show me some stuff though, so thank you

@trythistv 4 года назад

You are very welcome. I'm trying to learn more every day and do things the best possible way, so I appreciate the comments, they help me see what I can do better at!

@RLoose9494 Год назад

I just bought a pontoon and will be doing this shortly lol

@timrupp680 3 года назад

That cleaner ALSO has sulfuric acid in it .Read the label!

@trythistv 3 года назад

You're absolutely correct, I didn't see it listed anywhere at a glance before I made the video but later realized it does. This is why I don't get into cosmetic stuff as much. Rinsing properly (Excessively) is a must.

@adamjohnson9014 Месяц назад

I'm guessing your polishing takes off a more of a layer of aluminum than the spray cleaner.

@trythistv Месяц назад

Maybe, but it is a bit more consistent than acid that might eat unevenly or get pooled up in hard to reach areas. Either way, as long as you keep the algae and scum off somehow thats what matters.

@boydlakecrew772 4 года назад

Glad my pontoons never came shiny.

@markknight6910 4 года назад

The reason the second product/system works better it is intended to use all 3 stages required to clean and polish any surface that tends to oxidize over a period of time. It Very important to complete All three stages in order to completely "cut" or remove oxidation,, "clean" off oxidation.. Then "seal" and polish surface. these 3 steps will substantially increase the length of time and number of environmental exposures that expedite surface deterioration/ oxidation regardless of Name Brand being used !! Dont take shortcuts !! Its well worth the effort and protection of your equipment or toys !! Just a final not... My comment is Not intended to take away or reput your good video for the first stage of a complete process. Remember. Cut (wool pad).. Clean and seal (synthetic pad).. Then Polish with micro fiber pad then hand polish..

@trythistv 4 года назад

I will have to try those steps, the 2nd product I used was the zephyr wheels and jewellers rouge, and it seemed to give a lot nicer result, but it is a multiple step process. There's a lot about polishing I don't know, gotta learn somehow though!

@danrasmussen4125 4 года назад

If there is a corrosion inhibited in this cleaner then why can't you leave it alone? No ware on that product does it say its a corrosion inhibitor

@trythistv 4 года назад

You're absolutely correct. I could've sworn it said somewhere it had some kind of anti corrosion additive but looking at the sds it's just a 5-10% sulfuric acid solution. Well well, that makes rinsing even more important! Thanks for pointing that out!

@johnnycampbell8874 2 года назад

What about that Line?

@hidinfrombiden1734 5 месяцев назад

Looks bad doesn't it?😅

@leonkorotenko406 3 года назад

Why are you NOT hitting that gross waterline???

@billstclair2744 2 года назад

How much you charge for that boat

@trythistv 2 года назад

I don't recall off hand, Not enough I'd say lol, I think it was somewhere around $300

@ysesq 5 лет назад

use interprotect 2000e instead

@trythistv 5 лет назад

Just checked the stuff out, looks interesting, seems more like paint that's gonna leave a boring flat finish though

@soulainey 3 месяца назад

Alumabuff

@user-jh5oi1ex5u 4 года назад

Неплохо было бы на русский язык перевести

@josuenieves9420 3 года назад

The SHARKHYDE 2 STEP product & method is soooo much better hands down! Look it up folks. I appreciate this vid buts its definitely not the best. I have a 22 footer...trust me I know. Enjoy!

@trythistv 3 года назад

I'm going to try the sharkhyde system next time, You should watch the 2nd part where I show the new way I've polished toons, it ends up far better than this method: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VN7by9gs5G0.html

@rumnboats7612 2 года назад

Reality check; there is NO aluminum cleaner that has "corrosion inhibitors" Polishing aluminum does not protect it, it removes aluminum and smooths the surface. Polished aluminum will turn to crap just as fast as acid washed aluminum. The black on the polishing pad is removed aluminum. It's the same as polishing anything; you continue using finer compounds to remove the swirl marks which are indeed scratches until the surface is smooth. Proper aluminum cleaning products are hydrofluoric acid based, starbrite products are well known to be heavily diluted and pathetic compared to others, you should also use dish soap as a surfactant while applying such acids and rinse thoroughly.

@trythistv 2 года назад

You're right. There are a multitude of acids I've personally seen used, Sulfuric acid, Muriatic, Phosphoric. The big problem is some people hear acid, and go get a bottle of it, and spray it on without diluting, they don't rinse it properly afterward and it ends up eating holes in crevaces where it can pool up. Commercially available products tend to either come with clearer instructions, or are pre-diluted (yes, sometimes too much) so that it isn't as likely to turn a nice boat into swiss cheese.

@rumnboats7612 2 года назад

@@trythistv Crazy, I can't imagine what muriatic acid would do to aluminum!