Pond Prowler 10 to Pond Monster XL conversion.

Подписаться 178 тыс.

Просмотров 97 тыс.

50% 1

We have created conversions for plastic boats like the pond prowler 8 & 10 that bring the possibility for these boats to an entirely new level.
______________________________________________
Times & chapters for this video:
1:43 - Ideas for the pond prowler 10
2:08 - taking foam out of the pontoons
2:42 - framing the pond prowler
6:50 - trolling motor mount
7:43 - building the bow of the boat
10:00 - shallow water anchor system
13:05 - kayak rudder-controlled Livescope turret
15:57 - the rod lockers
17:56 - Hydro-turf interior
18:21 - attaching aluminum skeleton inside a plastic boat
18:36 - bilge pump setup
19:13 - pour foam installation
20:12 - templating the deck & subfloor
21:33 - switch panel layout
21:55 - self-routing Eva foam decking & flooring40:53 - Final touches
41:21 - wiring the pond prowler
42:05 - drop-in storage liners
42:31 - vertical day boxes
42:41 - bump board storage
48:50 - On the water
45:20 - Pond prowler vs yak killer Jon boat conversion
46:51 - EPropulsion Spirit 1.0
49:07 - How stable is the pond prowler 10 after all the mods?
49:18 - How did all the mods turn out?
50:50 - how did the anchors perform?
54:28 - my favorite mod in this entire boat build
54:55 - Final thoughts
_________________________________________________
Get the Insta360 X3 Camera and get a free accessory when you use this promo link:
www.insta360.c...
________________________________________________
Store Locations & contact info:
Online store: TBNation.net
customer service line: ‪(309) 323-8994
Or email us at: support@tbnation.net
Southeast Shop
5614 HWY 138 SW
Oxford, GA 30054
: 404-720-3975
ext: #1 for Chris, or #2 for Ryan
Midwest Shop: 309 231 3365
2331 LakeCrest Dr.
Pekin, IL 61554
__________________________________________________
GET EXTRA VIDEOS & Perks Patreon.com/TBNation
Full Amazon Store: www.amazon.com...
_______________________________________________
Instagram: Handles
@tinyboatnation
@tbnation_outdoors_se
@tbnation_outdoors_midwest
@titan_of_DIY
@tincancrew_official
Tik Tok:
@tinyboatnation
@tbnation_outdoors_midwest
_______________________________________________
*Find us on Facebook as well!
______________________________________________
Music:
From RU-vid Free Creator Library.
or Art-List. - YES we are cleared.
______________________________________________
Recommended Channels:
Tiny Boat Nation
Tin Can Crew
Fireant Fishing
JDS Outdoors
send jon boats
________________________________________________
Disclaimer: I am DiY creator, not a professional boat builder.
to put out concepts & ideas for people to view.
Modify watercraft at your own risk.

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 141

@TinyBoatNation 7 месяцев назад

*Times & chapters for this video:* 1:43 - Ideas for the pond prowler 10 2:08 - taking foam out of the pontoons 2:42 - framing the pond prowler 6:50 - trolling motor mount 7:43 - building the bow of the boat 10:00 - shallow water anchor system 13:05 - kayak rudder-controlled Livescope turret 15:57 - the rod lockers 17:56 - Hydro-turf interior 18:21 - attaching aluminum skeleton inside a plastic boat 18:36 - bilge pump setup 19:13 - pour foam installation 20:12 - templating the deck & subfloor 21:33 - switch panel layout 21:55 - self-routing Eva foam decking & flooring 40:53 - Final touches 41:21 - wiring the pond prowler 42:05 - drop-in storage liners 42:31 - vertical day boxes 42:41 - bump board storage 48:50 - On the water 45:20 - Pond prowler vs yak killer Jon boat conversion 46:51 - EPropulsion Spirit 1.0 49:07 - How stable is the pond prowler 10 after all the mods? 49:18 - How did all the mods turn out? 50:50 - how did the anchors perform? 54:28 - my favorite mod in this entire boat build 54:55 - Final thoughts

@THJAKFTRADES Год назад

Bruh. I have watched this video 3 times now. I can't wait to get to work on my Pelican Bass Raider, to see if I can get it even close to the craftsmanship that you have put into this boat. You're a big inspiration. Keep being awesome!.

@417CAR 9 месяцев назад

Hows the pelican ?

@TheDJSpecS Год назад

That intro may have gotten over alot people's head. It reminds me of a quote " if your dreams don't scare you there not big enough"

@rayfernandez5949 7 месяцев назад

Uh no .

@4ryanthomas Год назад

I’m absolutely amazed again at your creativity!! I wish I had one of your boats! Keep it up… Blessings my friend!!

@TinyBoatNation Год назад

Thank you so much 😀

@ColtWhitley Год назад

You need to host a TBN tournament structure to take this whole brand to the next level.

@Mr_Wicked Год назад

if only.. im a heavy dude. its my DREAM to own one of these.

@TinyBoatNation Год назад

Follow our pontoon project!

@PrincetonMicrogreens Год назад

I literally have everything I need for this build and I have a complete creative block that is depressing the hell out of me. I Don't have any freinds near by so its my by myself and I fear that I have taken on a project out of my league. 😢

@TinyBoatNation Год назад

Where do you live? Maybe there’s somebody in our network that is close by. DM us on Facebook.

@fjb4750 Год назад

Awesome video, well done. Love the project and love the humor😂😂

@TinyBoatNation 8 месяцев назад

Lots of humor

@rickyd865VOL Год назад

Love this video. I’ve been dreaming to trick my 12’ Sun Dolphin flat bottom plastic boat with some storage /foam/ navigation lights. Checked your website boat kits but no luck. If you ever run across one I would love to see you do one. It would blow the pond monster out of the water. Keep this stuff up. Maybe will see my kit on your website in future. Thnx for posting.

@AngelGarcia-i1r3o 17 дней назад

Yeah, that’s what I’m talking about😊😊

@bobiker9285 2 месяца назад

I got one I would like to leave it how it is but add rod lockers

@darcdiego14 Год назад

So after you got everything installed, why can’t you just started shooting the liquid foam in it?

@TinyBoatNation Год назад

It will go places it’s not meant to

@archtx9 Год назад

What is the weight of all the materials? How much left do you have on the boat rating?

@TinyBoatNation Год назад

I’m probably 100 pounds shy of the max load

@Truthfulfisherman Год назад

I am down. But damm it takes a while to build if you work on it only on days off.

@TinyBoatNation Год назад

Truth

@jerodjohnson7240 4 месяца назад

wait until he finds out about cnc machines. lol jk this looks sick

@christopherdanjou Год назад

How much would this cost for you guys to do

@TinyBoatNation Год назад

We have kits for it on our website that you can put together

@christopherdanjou Год назад

@@TinyBoatNation how much do you think I would be spending

@Luisroman772 Год назад

You talking makes me feel like I am literally in my head that’s the way my brain works

@ambkbero2 Год назад

I just found your channel and the opening dialog was FµↃkiΠ௹ Awesome.

@TinyBoatNation Год назад

Welcome aboard!

@relykking2523 Год назад

The editing is a huge improvement and I cant wait to see your future build with the 360 style.

@CrushedEMTB Год назад

I agree!

@tnddiving6166 Год назад

Well I built a cast deck on mine but not to that. That’s freaking awesome

@forever556mm Год назад

How much for That ?...sell them....sell me 1

@TinyBoatNation Год назад

We sell kits for it, but we don’t have a whole boat.

@round1017 6 месяцев назад

I have the older version of the 10’ pond prowler. Will the kit still work on mine?

@Htown_xotics Год назад

I live in Texas I was wondering if you could make me one

@TinyBoatNation 8 месяцев назад

Too far away, lol

@kelvinthecloud5620 Год назад

This was way over engineered ( in a good way of course) but if I had to add even on more touch you should try putting vertical sliding rails in the rod locker so you could slide the whole thing up and grab your rods that would be crazy but idk if that’s even possible 😂

@kennybrudnicki Год назад

Anything is possible if you can draw up a plan.

@in.hindsight Год назад

I love your mantra of "why do what others have already done?" I agree, if you're going to do something, make it your own and make it great so that it is worth your time. Time given can never be taken back. Do it so that it is not just another tiny boat, it is not just another car, it is not just another whatever...because when you've reached the finish line, you'll look back with satisfaction. But having this mindset, is there ever a time when one is truly satisfied? But know that the true product is not the boat but all the bits and pieces of nuggets of hindsight and insights you've gained and shared along the way. I'm a sub now. Greatness isn't achieved by following the mass.

@TinyBoatNation Год назад

I 💯 agree with all of this!

@omarherrera7745 5 месяцев назад

How did you fix the seam that was held on by staples? Just ordered one and want to do it before I hit the water

@TinyBoatNation 5 месяцев назад

I just siliconed and sealed in the seam and then reattached the lip back on with rivets

@omarherrera7745 5 месяцев назад

@@TinyBoatNationthank you!!!

@Steve-ev6vx Год назад

I wouldn't want to trade all my foam flotation for a rod locker. Glad you acknowledged it was a stupid idea. Now I am trying to figure out the point. Oh yeah, clicks.

@bigcountry908 Год назад

this comment means nothing when he added pour-in foam elsewhere in the boat he didn't really trade any flotation for the rod storage i can see this being correct if he removed the foam and added more weight than he did but the foam is really only there to displace water if it gets in the hull and with a proper bilge system this is a non issue

@TinyBoatNation 8 месяцев назад

I have four auto builders that are 1100 gph apiece. I’ll take that over those cheap foam blocks any day.

@kentyler966 Год назад

Do you have any videos that show the best way to remove the center seat in an Alumicraft. There is a small bracket on both ends that are riveted to the hull. Not sure how to remove these. Any thoughts?

@TinyBoatNation Год назад

Yes I have an entire video on it. Search Alumacraft.

@MrJrc58 Год назад

Great video, great project! The 12’ Prowler or the 12’ Quest Sportsman (Bass Pro/Dicks Sporting, same boat at 520# weight limit, $700), seems like a great candidate. On that boat, a new modded deck covering the footwells/battery wells could have hatches, and there would still be inside side walls above the deck of 8” or so. If you installed a modded deck even with the gunnels as on this 10’ build, there would likely be room below deck to add foam/flotation if needed. Anyway, thanks for the great channel! :-)

@kennybrudnicki Год назад

I forgot to add that I plan on putting in rod lockers on both sides, so I'm wanting to add strength to the outer walls before adding the deck. Maybe even using old aluminum signs for the deck instead of plywood if I can find some from the highway department or something. What's your take man?

@TinyBoatNation Год назад

Never modified a bass raider but it’s probably the same as this

@wendybrown2701 Год назад

I love my pelican bass raider,also. Would love to see an affordable modified

@theplanegod-rr9yu 27 дней назад

that intro was crazy and that boat is insane

@TheSouthsideslim 2 месяца назад

How much for the boat just like that

@tyheitman4167 6 месяцев назад

do you sell those shallow water anchors

@TinyBoatNation 6 месяцев назад

Not anymore

@rbnjr 29 дней назад

cost of motor linked somewhere?

@Chris_palmer1980 7 месяцев назад

Can we see a Colman crawdad build !!!!!

@sicariofishing 8 месяцев назад

I'm confused so did you make the anchors or did you buy em 😅, excuse my listening and comprehensive skills

@TinyBoatNation 8 месяцев назад

Made them

@sicariofishing 8 месяцев назад

@@TinyBoatNation that is freaking legit AF.

@keithsileo8031 Год назад

I want one so bad now! So awesome

@JamesJones-cx5pk Год назад

I like it, though I am a fan of the brand new quiet four strokes. A 5 hp with 2 gallons of gas might even weigh less.

@edwardclark3980 Год назад

Oh those are anchors cool

@Kiomanche Год назад

Unbelievable!! super bad ass and love the fact it can go in a toy hauler!

@TinyBoatNation Год назад

That was the key ingredient in the entire thing

@lovellallen6383 4 месяца назад

If we buy from tbn do we have to build this ourselves or it comes fully built?

@TinyBoatNation 4 месяца назад

You have to build it yourself

@tbnationoutdoors-nateeckhold Год назад

Badass

@TheRealBurritoboy11 5 месяцев назад

how much was this build?

@TinyBoatNation 5 месяцев назад

Probably around 4K or so for raw materials into the boat.

@jimmywallhanger8402 Год назад

Can you do a alumacraft 1036 build pretty please

@Cam_Currier Год назад

That’s sick

@stasylumbassist1 Год назад

When i need motivation i just turn on TBnation and listen to the narration.

@happyt5842 Год назад

Yo fr

@TinyBoatNation Год назад

Thanks for watching

@pspD1 Год назад

Hit this one out of the park mike... Screw the haters. God bless bro and keep em coming 🙏🙏🙏

@DH-fo9dx Год назад

Genius bro..

@brennanferguson3537 Год назад

I love the idea of an electric outboard, but until batteries get much, much lighter the power to weight ratio is just not there. ~50lbs is a 10 horse 2 stroke. Honestly thats the smallest motor I put on anything. Flatback canoe? 10hp 2 stroke. Portabote, 10hp 2 stroke. 10-11ft inflatable, 25hp 2 stroke :)

@TinyBoatNation 8 месяцев назад

The amount of problems you don’t have an electric outboard that’s portable, is worth it alone

@EricLeetFishing Год назад

I wish I had the skill and ability to do something like this to my sun dolphin... seems like paying someone to do it for you though you'd be in it as much as an actual tracker bass rig

@TinyBoatNation 8 месяцев назад

We have a lot coming for it!

@edwardclark3980 Год назад

Kinda reminds me of a grass hopper.

@TinyBoatNation 8 месяцев назад

I do now see the resemblance

@joshbates241 Год назад

nice build but bro next time skip the emo teenager "motivational" intro. You made it sound like building this boat was a impossible challenge that you overcame. When you could easily go on RU-vid to learn the "Skills" But other then that it took Money. Guess that sounded like i was hating, Mostly intro just cringed me out a bit but you do you like I said BA boat build

@TinyBoatNation Год назад

Thanks

@sikosis999 6 месяцев назад

you want a real challenge? :) i'm 6'7" 325lbs ( i used to be 643lbs ) and i want a small craft that can survive me and the lake i live on :) ( lake ozark, mo ) . . . i've thought of taking two of the kayaks and making a 'fat boy catamaran' our of them . . . a couple of these might work too :) legit, find me . . . i'm disabled. . .code for "old, slow & stoned" but i still want to get out on this lake and fish without spending $100k on a boat :) i got a crazy neighbor that might could help too he's a machinist and owned a speed shop for 30 yrs :)

@Johnnyboy_. Год назад

How can we pull it off with out the tools 😩

@TinyBoatNation Год назад

You can’t

@mikebryant1337 27 дней назад

Why?

@Bandit_X Год назад

Can you go more into detail on the trailer? I currently have a 5x8 utility trailer that I think is over kill, I like your trailer but I'm confused on what size trailer that is

@TinyBoatNation Год назад

Yeah. I’m gonna make one

@Gokywildcats11 Год назад

Wish this boat came in 12 foot

@TinyBoatNation 8 месяцев назад

They have them out there, but they’re rare

@champony6245 Год назад

How come your customer service sucks! Ordered parts and asked question through email and call no response. Answer me that!

@TinyBoatNation Год назад

Can you DM us directly on FB? It’s the fastest way to contact us if you have a problem. Will respond to you right away.

@kylecampbell3 Год назад

Look unstable as F. idk why people put all this time/effort/money into something as wide as a door.

@TinyBoatNation Год назад

It’s better than a yak!

@kennybrudnicki Год назад

Love your work! I'm planning on modifying my Pelican Bass Raider 10e eventually, but not sure how to best reinforce the outer walls at the top before installing the plywood deck. I do metal fabrication, paint and body work, so that gives me a little edge. I'm a carpenter, mason, plumber and pipefitter by trade from my time in the Army. The creeking from a wood deck can be remedied with sandwiching foam tape for truck toolboxes between the wood and other substrate. Butyl caulk on a roll works to semi-adhere stuff and stop rubbing.

@TinyBoatNation 8 месяцев назад

I had to weld a metal skeleton through the entire thing. It was not easy.

@TanBzk Год назад

Try out a “Downcut spiral bit” in your router and I think you’ll have fantastic results.

@TinyBoatNation 8 месяцев назад

Thank you! I’ll try it out

@jaredcotter3057 Год назад

Id like to see one with a sun dolphin 12

@1bearBrother 3 месяца назад

How did you seal the seams?

@TinyBoatNation 3 месяца назад

Silicone

@jeansonnea Год назад

Question, why don’t make your own line on Jon boats? It seems like everyone has great ideas and you can put together a top notch boat

@TinyBoatNation Год назад

It’s actually really hard. The US Coast Guard starts cracking down on you when you try to make your own boat line and the standards they have today are harsh.

@xylos16 Год назад

I am obsessed with your customization of this boat. I have been watching all of your videos. Im hoping that in the future I might be able to do the same thing... ❤

@TinyBoatNation Год назад

It’ll be worth it!

@edwardclark3980 Год назад

The bits with the bearing are edge routers. 1/4 3/8. 1/2 radious.

@TinyBoatNation Год назад

Thank you for clarifying.