I just done mine and heres a few steps that will make it easier for ya guys. Remove both windshield wiper arms... Then remove all the plastic push clips on the black plastic cowling thats under the wipers and it removes in 2 pieces. (Remove the passenger side piece first if its a aussie VE). That will also give you the opportunity to access ya cabin filter and filter box, to clean out all the leaves and dust that builds up in it. It only adds a extra 10mins to the job and is piss easy. You Don't have to remove the inlet manifold at all like some other similar youtube clips suggest and the job is easier again if you follow these extra steps. Your stress levels will be at a all time low... Ps Be aware there are 2 different senders available too and of course, i was sold the wrong one. One other thing i found too was. If you use a normal 27mm deep socket it starts to slip around the sensors as it has a little bit of slack in it. I ended up using a impact deep socket (the thick black ones that you use on a impact gun and its a tight perfect fit and wont slip... hope this helps..
I’m having an absolute nightmare getting the plug up. I pull the grey clip up a little and I put the god of power trying to pull it up before it feels like it’s going to snap but it just won’t budge. Any tips on how I can get around this. Literally pulling hair out