Porsche 991.2 GT3 RS Wash and Talk - Part 1 

Automotive Anatomy oh shit I didn’t realize you were a fan of Matt’s videos! I love both of your channels, it’s like asmr to me

@@KrispyKarl7 thanks 👍 i enjoy the washing videos not the podcast or other stuff lol

It's just a 50' pressure washer hose run through a 3" PVC conduit.

Signature:)

BBS would be sick. I believe Matt has said they dont have the offset hes looking for though. Maybe that was just in the case of the Z06. I'm a BBS fanboy so I'm 100% for this.

These are the first aftermarket wheels I've considered for my RS. tagmotorsports.com/vossen-s21rs-gt2rs-gt3rs

Seriously, Vossen wheels on the GT3RS...come one Matt. I agree they are donk Florida wheels. Get out of here with that janky crap.

HRE Custom one off wheel are the way to go on the RS.

Thanks man!

Griot's Garage

Nate E88s are 19” and won’t clear ceramic brakes

M6Jay I believe RT88 are made in bigger sizes.

Adam's is still better, but Wowo was pretty decent. Dundon headers needs Dundon center.

@@ObsessedGarage Fair enough, yeah Adam's what i currently use. I see on the Dundon, still man, that AWE piece looks fn sick!

He's using Brake Buster as a tire cleaner as well.

Adams rubber cleaner would have cleaned those tires

@@jenduhaime for sure. plus Adam's rubber always leaves the brush clean. Did you notice that Matt's brush is black? Always happens to me when I use d143. I suppose it's because Adam's is a degreaser when these wheel + tire combos are something else.

Easier said than done.

Absolutely LOVE sapphire blue also

L8 APEX absolutely this is what I’d like to see! instagram.com/p/B4DBd2gpUlx/?igshid=yqw9zu6dbih2

Yes

@@ObsessedGarage things brilliant White

There is only one "best" color. Ha, ha... I like white and this is my ultimate car. I wouldn't want to choose my second or third color choice on this car.

I would much prefer to do that.

To hold me over until Charles and Jaime to make it to OGHQ.

I was big into Bronze wheels in the early 2000s. I prefer black now.

@@ObsessedGarage Ya I here ya. I've just seen some 991.2 rs's from factory with the bronze and it looks amazing

For wheels, yes. I don't put water/soap in that bucket.

It's not if done correctly. It's much more efficient.

I think as you get older, you'll find chasing horsepower less and less appealing. I just run regular fuel on this car.

I wore your Red Obsessed Garage T Shirt Today. Hope I win the Garage contest. Thanks for responding and Happy Thanksgiving to you and your family

They are pretty much the same as stock, so I'd keep stock over spending $12,000 on those.

@@ObsessedGarage very true, I'm just a fanboy lol. I guess the only option is go porsche oem magnesium wheels hint hint. By the way, AWE is awesome. I've been to their facility a couple times and I'm always amazed how much of a difference there is between companies that actually care. The attention to detail of the facility is top. Their employees and customer service are great. Let me know if you ever go check it out in PA. Would love to meet sometime, but I'm an east coast OG fan.

Love it!

Hey, you can't fault them for making stuff that people want. It's just a dead giveaway when someone does one of those that they don't know what they are doing or they got one for free/deep discount.

Seems a bit unfair to suggest none of them know what they’re doing. There’s pretty decent evidence out there that there’s some decent engineering going on...Dundon aren’t the only ones who know how to make an exhaust, and Manthey wouldn’t be installing one of those brands you mentioned if they were just ‘welded shiny pipes’

www.obsessedgarage.com/collections/wheel-tire-cleaners/products/lambskin-wheel-mitt

Obsessed Garage I found them on your site about 5 minutes after I posted that. Got them ordered! 2 of them!

I would coat it. I usually use Gtechniq CSL. I'm interested in applying Halo that is designed specifically for PPF.

Meh...I'm done with them. They take forever, cost a ton, and got the offsets completely wrong on my M3.

I didn't build this, so the pitch is not right.

It will last longer and be more hydrophobic.

I think those look too darn close to OE wheels. They weight pretty close to the same.

It is this one: www.obsessedgarage.com/collections/wheel-tire/products/lambskin-wheel-mitt

Just wheel cleaner and Lamb Skin Mitt.

They will roll down a slope. I only use the dolly for my wheel bucket, but two of the wheels can be locked, so I usually just lock one and it doesn't roll.

Check out some of the older wash videos. Matt's buckets used to roll away every video when he was doing the driver's side rear quarter panel. I assume they still roll away, but it doesn't make it into the edit.

You can set the brakes. Each dolly had 2 brakes. You can leave them on and just drag them around.

Yep, they are!

Antony V it’s just wheel cleaner all of the same steps of cleaning a wheel still are necessary for the wheels to actually be clean

Clark Kastory obviously the standard steps are required but you get way more lubrications with foaming the wheels instead of a bucket with soap. What brand is the wheel cleaner/foam he’s using on the wheels?

Antony V he is using brake buster. I cant remember if he said it’s diluted or not. You can pick it up in his store. I have been using it for a while now and it’s great.

@@TeslaWorld I believe he's using 50% h2O/50% brake buster.

In The Details do u spray it in with a trigger bottle? Or do u dilute half half and use a foam cannon to foam it on like OG does?

You forget to whom you are commenting. I don't make up stuff. Maybe you don't know the whole story.

Were you aware of JCR’s partnership with Manthey Racing?

Yes

I think you've got the wrong Vossen.

Not hating, I’m sure their premium lineup is nice. But they rose to popularity with the stance crowd in 2011-15.

www.obsessedgarage.com/collections/mosmatic-boom-poles

Matt Duffy OH MAN…I am definitely incorporating one of these bad boys for sure into my new wash bay! Thank you very much Matt!

I have a bunch of Flexfit Hats in the store now.

Obsessed Garage maybe I am missing the correct page, but all the ones I see have the SnapBack closure.

All the hats on the bottom are Yupoong Flex Fit. www.obsessedgarage.com/collections/hats

They are different, but they are simply welding shiny pipes together. I know the story.

Obsessed Garage I really think you should try out their titanium valved race pipe. I have it on my GT3. It’s right up your alley. A refined, exotic tone, that sounds basically stock when you’re not “on it.” No boom, no drone. And when you go WOT it absolutely screams. I was actually thinking of you after it was installed (“Moreman would love this thing”). The owner, Jonny Cocker, is a professional race car driver. If you check out their Instagram JCR_porsche, you see them track testing almost every day. Much, much different than these Asian companies relabeling the same exact exhaust. Honestly, man, by not giving them a fair shake you’re doing yourself a disservice. I really think you’d appreciate the product. 🙌🏼 Love the new ride, man

Matt and Jamie are tight, the comments in the video are right out of Jamie’s mouth, as Matt mentioned. Somewhat disappointing to hear from Matt as to be honest I thought he would know better.. Jamie contacted us privately very recently asking if we would like to work together, after seeing this (I’ve been a fan of the channel and subscriber for 3 years) we politely declined, we just go about business in a different way, we respect others and focus on improving ourselves rather than resorting to spreading false rhetoric. Whichever way you look at it, these comments just drive us harder and ultimately we have the last laugh. Anyway, better get back to those shiny pipes ;) JC

@@JCRDevelopments I agree. Matt is a bit of a tool so no surprise here. If you watch his opinions about other things he has a "my way or the highway approach".....

Tundra Whisperer it’s the one from griots.

Are you running the factory Brembo pads? I've got a 350 as well. The brake dust is atrocious but we may just have to live with it unless you want to shell out some dough for carbon ceramics. I've also heard of some decent pads that are a little better for dust but haven't tried them.

The gloss finish on our wheels drives me crazy too. Scratch city.

350 here as well... I know your pain man... on the plus side... go fast and slam on your brakes... I’ll take that performance for some brake dust anyday

@@amac8487 True. Rip your face off brake power for sure

L8 APEX Yep factory Brembos... burned through the hills and went 120 to an almost complete stop today prior to the detail... it’s a nightmare man. IG: fpbcobra

Those look pretty much the same as stock, so I've never pulled the trigger on them.

I'm doing AWE SwitchPath before Dundon.

@@ObsessedGarage Curious at to why? The GMG is much higher quality!

GMG is a center bypass. Switchpath eliminates side mufflers.