Porsche 996 IMS, RMS and Clutch Inspection (Project 996 EP 05)

Подписаться 15 тыс.

Просмотров 10 тыс.

50% 1

It's Porsche 996 #IMS and #RMS inspection time. What will we find? Will we need to replace the RMS and/or the IMS? If so, this could add several THOUSAND dollars to our build budget.
In this video we continue from where we left off in the previous video where we removed the transmission from the 996. Here we need to remove the cracked bell housing from the transmission that's still attached to the engine. We also remove the clutch and fly-wheel to inspect the RMS and now infamous and dreaded IMS. Join us and check it out!
As ever, thanks so much for watching my videos and supporting my channel. Keep the comments and chat coming! More videos coming soon. Cheers!
#Project996
Stay tuned as I follow a dream to rebuild, restore and transform a Porsche 911.
#AutoAmateur
Also check out my blog at www.autoamateur.com to get connected with other like minded Porsche enthusiasts, check out my blog, more DIY and driving content. Custom #SportsChrono gauge faces are now available from my online store in a variety of colors! Check them out!
Web: www.autoamateur.com
Facebook: autoamateurblogger
Instagram: @auto.amateur
#Podcast
Tune in and join my new AutoAmateur podcast! You can find it on SoundCloud, Apple Podcasts, Spotify and Amazon Alexa's TuneIn app among other podcast services and platforms. Just search for Auto Amateur.
/ why-videos-porsches-mo...
Title Music by Massive Attack, Music by Joakim Karud / joakimkarud

Авто/Мото

Опубликовано:

15 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@BoostedMPLS 4 года назад

My brother!!! Thank you so much for the support!!

@AutoAmateur 4 года назад

🙌🙌🙌

@jvw1973 4 года назад

Great job on the improved camera work (under the car) compared to the last video, but the German in me would DEFINITELY replace Clutch (of course I do NOT have to pay for it)...great job fellows, keep it up...

@HawkMillFarm 4 года назад

jvw1973 Agree, not sure that clutch plate would cost to much, pleased the flywheel is in good condition.

@FatKidontwowheels 4 года назад

Nice work guys!

@AutoAmateur 4 года назад

Thanks Keith!

@MsCliveharper 4 года назад

Great work guys 👍

@AutoAmateur 4 года назад

Cheers Clive!

@bjbraunlich 4 года назад

Great work Pat!!! Love to watch the progress.

@iainmcglynn833 4 года назад

My day off , large coffee in bed and watching you guys enjoy yourselves. Such good editing / sound / camera work and as seeing is believing it’s fabulous to see the IMS and RMS solutions done. I’m loving this content as an ‘04 Boxster S driver this model would be about as far as I could stretch next car C4S my dream . I would buy a new clutch just for peace of mind as you dodged so many bullets and they’re not very expensive especially 1/3 rd shares . I’ve just watched a guy change the AOS on my car and it’s a pig to get at , is it easier on a 996 , and my water pump just sheered off so a new pump belt thermostat and coolant .you guys are cracking on in a good system getting the big jobs tackled first . As for your feet , everyone is avoiding a two hour big man crying video after a 10 mm spanner falls on you 😂. I’m teasing but safety first is good . Pat and Steve say for the love of god can we get a fan blowing across us at least or some a/c

@peteisjustsaying1646 4 года назад

Hey guys, really enjoying the videos you have done to date on the 996 project. Looking forward (as I’m sure you guys are) to seeing the car finished and on the road driving. All the best to one and all.

@AutoAmateur 4 года назад

Cheers Pete! 👍

@mikec1096 4 года назад

Good job Pat. Going well. Consider replacing the AOS while you have the trans out. it's much easier to get it now.

@edjustice7755 4 года назад

Great in-depth video of the work that is needed for a project like this...thanks again!!

@AutoAmateur 4 года назад

Cheers!

@JohnKaufmann 4 года назад

You guys are having a great time!

@cstavrou58 4 года назад

Great job so far guys! Great news on the condition of the other parts.

@gutsy.trails.adventure 4 года назад

Awesome channel and content! Sub’ed from Norway!

@AutoAmateur 4 года назад

Thanks you! Cheers!! 🤩🤩🤩

@riptidetofreedom6376 4 года назад

Excellent synopsis of the process; I am enjoying this series. It's tempting to replace the clutch just because your in there and don't want to go back any time soon. But you must trust your SMEs.

@davebentley3542 4 года назад

Looking good so far chaps 👍👍 Maybe consider putting a short shift linkage kit in whilst you are working through the drivetrain?

@bjbraunlich 4 года назад

Love the manual gear box Steve. No other way to own a 911. Great work guys.

@K1dPhresh1 4 года назад

Another great video! Really loving this project. I’m living vicariously through Pat and Steve. And just like, James, I don’t even have to get my hands dirty!😂. Keep ‘em coming!

@AutoAmateur 4 года назад

Ha!! Cheeky.

@K1dPhresh1 4 года назад

Auto Amateur all in good fun!!

@JAYREAD 4 года назад

Great 996 content! Thanks! Subbed. Fellow Brit here in CT.

@AutoAmateur 4 года назад

Cheers Jay!! 🤩

@TomCccog 4 года назад

Nice not having to replace all those expensive parts. More money for things like coilovers, etc. That's great news!!!

@AutoAmateur 4 года назад

Cheers Tom!!

@stewartnunn8179 4 года назад

Another great and entertaining video guys but please don't put that gear box back without changing the clutch ;-)

@paulsanchez4141 4 года назад

Excellent videos

@AutoAmateur 4 года назад

Cheers Paul!!

@karlmoss552 4 года назад

Another well produced, informative and easy to watch video. Just a pointer for a potential source of your oil seep. The crank case pinch bolts are usually replaced/updated as they have been known to allow oil to penetrate passed them. The new bolts come pre thread sealed. From memory I think there are four. Two inside the housing, above and below the cranks seal carrier.

@AutoAmateur 4 года назад

Great suggestion! Thanks Karl!!

@997GURU 4 года назад

Approved ! Allready IMS solution installed 😁 will last the entire life span of the engine

@AutoAmateur 4 года назад

Cheers Trond!!

@ktmbilly3963 4 года назад

High five 🙃 great vid 👌

@AutoAmateur 4 года назад

Thanks!! 🤩🙌

@ternavasso1963 4 года назад

Guys replace the clutch disk, it isn't expensive and a must do when you have the gear box off the car.

@dinesh1996sahu 4 года назад

Thank you for setting a good example and being safe. Now how do we convince you to wear safety glasses? Imagine not being able to see you kids graduate...that's what it took for me to always wear them

@patdouglas6845 4 года назад

Don't worry James is far enough behind the camera to be in any trouble :)

@garydilbeck8882 4 года назад

If the housing bolt(s) came loose causing the breakage then this is a fantastic example of the importance of factory spec torque values. I have to ask. Were you informed of this ailment prior to the purchase? Surely the seller was aware of it. Great vid. Now we are gettin into the meat and taters. Love it! Take good care guys.

@AutoAmateur 4 года назад

Cheers Gary!! Yes, we knew about the transmission issue before we bought it.

@slytherben 4 года назад

Replacing the clutch will definitely encourage the next buyer to pay more and buy with confidence. Will also give you plenty of leeway to drive it hard over the next few years too

@garydilbeck8882 4 года назад

I am hoping that some of the engine mount replacement makes it to video? I hear it’s an easy DIY? The term “EASY DIY” is subjective to many factors as you well know. Thanks go out to Pat for his reply to my previous comment. The future looks very bright for that Ol’ Girl. Take good care boys!

@laurencegibbs3640 4 года назад

I did try to leave this comment in your other vid but maybe you tube didn't like the slang i used for the transmission? Do you know others with your lift that have removed the gearbox ? The reason i ask is that it looks like your gearbox jack gets real close to the bar on your lift and that's with the bell housing out the way? Great vids , keep them coming.

@ItsPinecone_911 4 года назад

Glad to see that everything else was good. The flywheel has about 250 miles on it since it was installed and before transmission split. The IMS has about 750-1000 miles on it since it was done as well. 😁

@laurencegibbs3640 4 года назад

So you didn't do both at the same time? So two different installers between ims and flywheel?

@Mack1364 4 года назад

That flywheel looked a little rough. Are the teeth ground down at certain points or was I seeing things? I’m wondering if the case being cracked it created instability in the connection between the starter and flywheel before finally coming apart. It’ll never be easier or cheaper to replace it all of it now.

@ItsPinecone_911 4 года назад

@@laurencegibbs3640 the flywheel was good when I had the IMS done. But when the starter went out and only kicked out half way it chewed up the flywheel and I had to replaced both.

@ItsPinecone_911 4 года назад

@@Mack1364 teeth looked fine but it did look like it got scrapped from the transmission splitting. But overall the flywheel looked good.

@Mack1364 4 года назад

Its Pinecone Good deal. Thanks.

@christophorus991 4 года назад

The clutch disk looks a bit damaged at the edges. The handful of clutches I've pulled out don't have fibers sticking out and rough spots at the edges like that.

@AutoAmateur 4 года назад

Cheers mate!!

@ideabrickworks9043 3 года назад

Sorry for late question, but once you have the transmission out, how did you support the back of the engine? I want to do my IMS and leave engine in place. Thanks!

@AutoAmateur 3 года назад

Good question!! We had a second transmission lift under the engine to hold it in place.

@ideabrickworks9043 3 года назад

@@AutoAmateur Based on the video, it would be nice to be able to raise and lower with the transmission out. Did you see a way to temporarily secure the engine?

@garydilbeck8882 4 года назад

I have never seen a housing break to that extent without some form of extreme trauma. Could worn out engine mounts cause such a thing? If so then I am definitely replacing them on my 06.

@mikec1096 4 года назад

It worries me why that housing broke in the first place.

@patdouglas6845 4 года назад

We definitely will be doing engine mounts. A little bit of research pointed to bad mounts as one potential cause.

@TDS981 4 года назад

Just when I thought us Scots were the tight ones, you have two 911s get your wallet out and replace that clutch so it's nice and fresh.

@AutoAmateur 4 года назад

My step-mum was 100% Scott, she must have rubbed off on me. HA!

@jaredsmith7693 4 года назад

what lift is that

@AutoAmateur 4 года назад

Check out Toolots.com

@miamirice6840 4 года назад

Would have appreciated seeing the stripped bolt removal.

@AutoAmateur 4 года назад

Ah, yeah good one. We zipped through that in the time-delayed shot where you can see Pat using the hammer for a spilt second.

@Eatongee 4 года назад

I don't know what you guys have for lunch while working, but I'd love to send you a couple of pizzas! Or at least a gift card for some!

@AutoAmateur 4 года назад

Haaa!! Thanks mate!! 😆👍

@Eatongee 4 года назад

@@AutoAmateur Got a PO box and a local take out joint that has gift cards?

@AutoAmateur 4 года назад

@@Eatongee That's so very kind! We'll eat whatever it is you get us in the next video... :) 701 Washington Ave N Ste 111-279, Minneapolis MN 55401, USA... Pizza Ranch or Jimmy John's...? Thanks so much!!

@Eatongee 4 года назад

@@AutoAmateur Cool! Sent one this morning. Jimmy John's website wouldn't accept the address, so Pizza Ranch it is!

@AutoAmateur 4 года назад

Ha! Thanks so much!!