No video :(

Porsche Boxster Suspension. Front And Rear Struts and Springs

Подписаться 10 тыс.

Просмотров 25 тыс.

50% 1

2001 Boxster Struts and Springs.
Suspension work on this 2001 Boxster S.
Front and rear strut and spring replacement.
This car has been lowered too low for regular driving. We pull out all the old work. The springs are super soft and low. We get a matched set of struts and springs to bring it back up. It is still a still lowered stance, just not too low!
I know we do not have the other videos on the brakes and wheel alignment out there yet. I just chose to do this one first, the other videos will follow soon.
Kit of front suspension tools
amzn.to/3gFAi1z
Just a Tie Rod End Puller
amzn.to/3swn24N
Spring compressor
amzn.to/3HNjPUV
We will get credit for Amazon sales, at no cost to you. Thanks.
Front Strut and Spring 5:55
Rear Strut and Spring 24:40

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@Boxsta_57 Год назад

Glad I watched this again.For the rear struts other videos showed undoing the axle from the transmission side

@klassikats Год назад

glad it helped Kurt

@samspitale1169 6 месяцев назад

Excellent procedure explanation. Thank you.

@klassikats 6 месяцев назад

Glad you enjoyed it Kurt

@SortItOotMan 2 года назад

That strut pinch bolt. I wish mine came out that easy. No chance. If you're in there, grease that bastid thing. SIOM. I used B6 sport struts, new top mounts and bump stops!

@klassikats 2 года назад

Yes they can be a pain in the ass to get out. However I would not grease them going back in

@user-bx1wy4hs8q 7 месяцев назад

GREAT Video , Thank you !

@klassikats 7 месяцев назад

Glad you liked it! Kurt

@martingregory5955 Год назад

Best descriptive vid on this subject I've seen, not that I've done it yet except tuning forks and coffin arms which is easy. Have you done a vid on coolant tank replacement tank Kurt?

@klassikats Год назад

no not yet on the coolant tank replacement. Thanks Kurt

@OhioPeteS2k 2 года назад

Very nice job. You make it look easy. I couldn’t find the brake video though

@klassikats 2 года назад

Glad it helped, sorry the brake video is on its way should be this week... thanks for watching

@klassikats 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CiFpafuMPGI.html Brake video

@MowSow Год назад

Such a great and detailed video !! Thank you for making the effort to film those video. I have a question, what are the torque specs for the half shaft axle on the hub side and on the transmission side ? I have an 06 Cayman

@klassikats Год назад

The axle nut is 460 NM and the inner bolts for an M10 are 80 NM Kurt

@p____p4tel Год назад

Tremendous Channel and informative (and entertaining) videos. I'd like to ask if the various issues the car had were related to the owner having had lower springs installed on stock shocks. Should he had had the foresight to change the strut as well as the lowering springs at the same time ? I replaced my springs with H&R but my garage didn't advise changing the shocks at all and now after numerous hours of labour cost I have a car that drives really firm and is a horror on some poor quality roads. I look forward to your thoughts on the question I posed. Thanks in advance.

@klassikats Год назад

Yes ideally the original owner of this car should have installed the correct struts along with the springs. However, it has been my experience that most owners and shops dont seem to think the whole job through. A vehicle is a marriage of engineered components all designed to work together. When one part is changed its effects will ripple throughout the entire vehicle. And yes, a lot of the cars problems and issue were do to mismatched parts. Kurt

@p____p4tel Год назад

@@klassikats thanks for your prompt reply Kurt. I guess I will be going to a different shop to get the car back to stock (I still have the original springs) or contemplate the new shocks to ensure the lowered springs are working with appropriate components.

@MrDavidrosenberger 2 года назад

The 986 looks so much better lowered like this. Whatever happens with the tires is worth the extra wear

@klassikats 2 года назад

yes i agree

@drvisnic1541 10 месяцев назад

My rear tyres only last between 10,000km and 15,000km and I have even tyre tread wear throughout. It’s because of the weight - The engine mass is right there. Imagine if it was cast iron? 😆😂🤣 The rear tyres wouldn’t last 8,000km. The front tyres last at least 30,000km plus because there isn’t much weight over them.

@hawkinsjd11 4 дня назад

@@drvisnic1541 I go through 3 sets of rear tires to every set of fronts. I am in the predicament or replacing my front tires for age not wear.

@tomkrug809 Год назад

Very good information and well explained. My question is you did not need to undo the axle from the transmission or the axle nut from the hub to drop the hub? I have seen other videos where they do one or the other it appears that you did neither. This seems much simpler, keep up the good work, and I am a subscriber.

@klassikats Год назад

You can if you want take out the entire rear axle, but I dont. It does make for a slight juggling act in snaking out the old strut and then installing the new one, but in the long run saves time and money. Kurt

@JAYREAD Год назад

I’m getting a bit of English accent, southern US with high notes of Australian? Where the hell have you lived!!!??

@klassikats Год назад

In all of those places, Good Ear... Kurt

@DLMorel 2 года назад

A branick spring compressor is worth every dollar, how about helping this guy out branick?

@klassikats 2 года назад

Yes I agree had one for many years in my shop. Unfortunately it did not make the move from the old shop in CA to AZ Thanks Kurt

@ericcrown965 Год назад

catterham

@WARXion Год назад

At 16:16 you put the washer upside down, the concave washer should face downward at the bottom and upward at the top.

@klassikats Год назад

Already answered this in our other comments. But yes in the video the washer was flipped and unfortunately we did not show us correcting it. Thanks Kurt

@martingregory5955 Год назад

Sounds like a bit of an aussie accent creeping through? Good info mate.

@klassikats Год назад

thanks Kurt

@tiagomontenegro5932 Год назад

At 38:30 when Klassik Automotive Training School was replacing the strut is possible to see that the CV joint boot is completely torn apart. I was wondering how he didn't noticed that. Does anyone have any idea?

@klassikats Год назад

Yes, on that car, the boot had split a long time ago, and the joint had become damaged due to debris entering the joint. The axle needs to be replaced and not just have a boot installed. Unfortunately, at this time, the owner could not afford the cost of the new axle. On a 20-year-old car, work will always need to be done. However, sometimes you need to prioritize based on the owner's budget to what gets done and when. In this case, this car also needs a transmission rebuild. So we made the choice to leave the axle as it is not a danger to the operation of the vehicle and replace it when the transmission is out for repair. Kurt

@martingregory5955 Год назад

So for rear strut replacement no need to release the drive shaft or loosen either inner or outer? Maybe I missed a bit but others show they do.

@klassikats Год назад

No I dont but I cant say what others do. Kurt

@martingregory5955 Год назад

@@klassikats thanks for the tip as reduces the work.

@keithholland7341 2 года назад

Do you not need a spring compressor to remove the front top strut mount? I have a 2003 986 S with standard suspension and need to change the top mounts, bump stops and dust sleeves. I just want to be prepared correctly for the job. I have been in Volkswagen service for over 45 years so am capable of the repair.

@klassikats 2 года назад

Keith, With standard springs you will need a spring compressor. Thanks Kurt

@keithholland7341 2 года назад

@@klassikats Thanks, I thought so 👍

@FueledBy.Passion 5 месяцев назад

What brand of springs were the red ones?

@klassikats 5 месяцев назад

Sorry its been too long since we did this job and I just cant remember what spring we used with this. Kurt

@joachimmyhre2754 2 года назад

Sure you put the bottom washer the right way?

@klassikats 2 года назад

when I first dropped it on it was upside down, we reversed it just looks like that take did not make the video.

@mikesiguenza8809 2 года назад

What are the torque specs for the sway bar drop link?

@klassikats 2 года назад

45 Nm Thanks for watching Kurt

@laytonhayes787 2 года назад

What strut from Bilstein did you use?

@klassikats 2 года назад

Hi Layton, thanks for watching. The Bilstein numbers are 22-113313 front, and 22-113320 rear. M030-B4 Sport Suspension On Amazon, I found the front, amzn.to/37yHXxW But the rear I found was a B8 for lowered springs, amzn.to/38jjLiL Sarah

@laytonhayes787 2 года назад

@@klassikats wow. Thanks for doing the research to help me out. God bless. I’m subscribing now.