Portable and Compact Telescoping Fishing Poles For Ham Radio - Goture Goldlite

Подписаться 50 тыс.

Просмотров 18 тыс.

50% 1

I have an affiliate link if you are interested in this pole. An affiliate link means I may make a few cents per sale. Sometimes even a buck or two: amzn.to/318FfM1
tent spikes amzn.to/3pJr9e4
If you don't want to buy off amazon, that's cool: www.aliexpress...
I'm pretty sure you can find these fishing poles other places. Today, we discover and explore them being used as a pole to hoist up a sloper configuration end fed.
Brand Name: Goture
Origin: CN(Origin)
Position: RiverPosition:
streamPosition: Reservoir
PondPosition: LAKE
Category: Stream
RodMaterial: CarbonTop
Diameter: 0.9mm
Model Number: A10578
Hardness: HARD
Model Name: GOLDLITE
Type: Carp Fishing
RodPower: 2/8 or 3/7
Material: Carbon Fiber
Butt. Diameter: 12mm-19.5mm
Length: 3.0M/3.6M/4.5M/5.4M/6.3M/7.2M
Line Weight: 1.5kg-2.5kg
Target Fishes: Carp, Perch, Barbel, Bream etc.
Application: River, Lake, Stream, Canal, Pond and Reservoir, etc.
Hand Pole: Stream Fishing Rod
#HamRadio #Hamr #HamHarder

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@loraz0 2 года назад

I found the "Miracle grow super steel garden stake" fits inside perfectly. They are 6 feet long, tubular steel with plastic covering. I use a 2 foot section, push 1 foot in the ground, and slide the pole on the other foot. I left it up in 40+ mph winds for a day, and it stayed up great.

@roadie6153 2 года назад

Great idea. I use a tiki torch stake for backpacking. Very light aluminum with a thumb screw to tighten down any diameter pole, whether a fishing rod or Carbon 6 mast.

@HAMRADIODUDE 2 года назад

I kind of like that idea. I may get a pack of those to test them out. They look a lot less like a prison shank (in case I get pulled over or something). Thanks for the input!

@IrregularInterest 2 года назад

I've also been waiting on a Carbon 6 for months, so this video is hugely appreciated. Will definitely check out the Goture.

@alanb76 2 года назад

Good short video. Always good to have another option with more available components, especially in the current supply chain situation. The off white pipe looks like CPVC which is used for hot water whereas PVC is only rated for cold water. Electrical tape is good, or 3d print some adapters. I made some similar adapters for the larger telescoping poles with a trailer hitch and some all-thread layered with PVC and tape for quick stationary vehicular deployment (before I had a 3d printer). Lots of useful ideas. :) 73 de w6akb.

@HAMRADIODUDE 2 года назад

You are correct Alan! CPVC! I have this cool 3d printed "connector" or "Separator" designed. Hopefully if I get a few moments, I can go test it out, but it's super simple and prints in about 35 minutes. I'll be happy to share it when I confirm it's working. This is my favorite part of the hobby. Finding things that will work, and designing others that will make those things work better.

@Siskiyous6 2 года назад

I missed this during hunting season, thanks for pointing it out to me DUDE! Spike nails are dirt cheap and will do what you are doing there.

@HAMRADIODUDE 2 года назад

Hey, no worries. I the k8mrd has a few videos on similar stuff. I can't wait for warmer weather so I can get to outdoor recording again

@wa7jnjradio Год назад

After leaving one of my poles on a summit, looking for a replacement...and nice to see this Amazon one as an option! 73

@paulhastings3109 2 года назад

Looking good will be checking it out 73 Dude

@HAMRADIODUDE 2 года назад

Thanks Paul! I hope you enjoy!

@brentjohnson6654 2 года назад

Very nice. I am looking for a portable pole for maybe POTA and this gives me some ideas. You are very clear to me and I will keep watching this channel for more content. 73 de KI5HXM

@HAMRADIODUDE 2 года назад

I really appreciate that. I do my best to make things easy for everyone to understand. Let me know if you come up with any other cool ideas or find a pole you enjoy. So far, I have brought this out a few times and it's done a real good job. One thing I did: I used the smaller off yellow tubing and placed some heat shrink around it, then taped it. I did this after I let the epoxy fill up inside the tube. It looks a lot cleaner and seems to grip the inside of the pole a little better. Thanks again!

@lyledal 2 года назад

Very useful vid! Terrifying amount of whipping it out though! 🤣

@HAMRADIODUDE 2 года назад

Oh yeah, I need to watch my choice of words. :)

@Wildhare-uo5vj Год назад

You need to measure your poke when it's assembled. They get their measurements by adding the total length of each piece and giving you the sum. When I got my rod, it measured 18'6. They don't factor in the length lost length of each piece when a little of each piece is inside the last one. By the time I removed the top two pieces it was under 14'.

@HAMRADIODUDE Год назад

Thank you

@truck57us 2 года назад

Nice video. I have been using this pole for a 2m/70cm roll up slim jim (ladder line) antenna and RG8X coax for over a year. Super easy to carry and deploy as shown.

@HAMRADIODUDE 2 года назад

I think that I may get a slim jim (or build) ladder line antenna for just that. Thanks for the input. Glad it is working well for you!

@potaactivator Год назад

This is exactly what I need for POTA. Thank you.

@HAMRADIODUDE Год назад

My pleasure. Another good one that I've had success with lately is the South bend kwikstik. 17 ft and it appears to be better build quality with a tad more rigidity

@potaactivator Год назад

@@HAMRADIODUDE I actually searched for that one a few days ago and could not find it in stock anywhere.

@HAMRADIODUDE Год назад

@@potaactivator this is an affiliate link, but this is the one I have, the only thing I would recommend is not opening it by sitting it out like a fishing pole as the sections tend to get stuck together. amzn.to/3KIPXNk

@HAMRADIODUDE Год назад

If I can get my garage finished cleaned before I leave Tuesday, I'll try to make a quick video comparing about several different crappie poles

@submarineradioman5535 2 года назад

Nicely done!

@HAMRADIODUDE 2 года назад

I appreciate it, thank you!

@submarineradioman5535 2 года назад

@@HAMRADIODUDE a lot more convenient than the bronzed steel 33’ telescoping whip I used to drag up through the conning tower to the bridge at sea!!!

@don_n5skt 2 года назад

Those poles work great for building a Moxon like Chuck has. ;) Did you try using end caps on the 1/2 pipe? I have many Carbon Fiber masts and if you run a wire buy it or coax down it, no issue. I have used ladder line next to it at 3" out from the pole with no issue.

@HAMRADIODUDE 2 года назад

Hmm, I did not try the end cap, but that is worth a shot! Thanks Don! As for the moxon, I love what he did. We had the Moxon up and operational within 10 minutes, I would say. Nice poles to have around.

@seanfoley7097 4 месяца назад

I'm on the third floor apartment when the landlord won't let me throw a wire to a tree so I got one of these with the idea of putting my 66 ft of wire through the end of it and stick it out the window so it's away from the house and hanging straight down with the wire coming in down the pole into my radio and when I'm done playing radio I'll just pull it back in

@themasterhammer 2 года назад

That off colored pipe is called CPVC.

@HAMRADIODUDE 2 года назад

Thank you!

@503Nick 2 года назад

I literally got my SOTAbeams 6M carbon last week and ordered it less than 2 weeks before that

@HAMRADIODUDE 2 года назад

Where from

@HAMRADIODUDE 2 года назад

DX engineering is showing out until December

@stevenemert837 2 года назад

Is that a Knight Kit Star Roamer in the background? I'm jealous.

@HAMRADIODUDE 2 года назад

I got it at a church rummage sale for a buck or two :) Thanks!

@mikebohemia1947 2 года назад

Thanks, really useful. 73.

@jbaker389 2 года назад

Any reason you couldn't attach the pole to a tripod with something like a "CAMVATE Super Clamp Articulated Mini Ball Head with 1/4"-20 Thread Hole" and stake/weigh the tripod down to get things just a little higher since your not using the end lengths?

@barrykelly2722 Год назад

So many innuendos possible but I will refrain. Lol

@nerdlywehunt 2 года назад

Just fyi, kickbacks are illegal in the eyes of the IRS but affiliate links or online review compensation is legit.........

@HAMRADIODUDE 2 года назад

I'm not sure I understand what you're trying to tell me here..nor if it has anything to do with more or rather how how the system works? Thanks

@ronrico2620 Год назад

The link for this pole has multiple colors for different prices. Is there any difference in the strength or are they all same? This radio hobby isn't cheap and I'd like to save when I can

@hikingfish3 Год назад

I was just looking at these fishing poles on amazon. Great video! Would these work with a slim jim (N9TAX) antenna or would they cause interference?

@HAMRADIODUDE Год назад

That's a great question. The potential is there as it is Carbon Fiber. i guess I could make one, but it would be a few weeks.

@hikingfish3 Год назад

@@HAMRADIODUDE I'd love to see that video if you can do it! Kudos for the channel

@davlanders2 Год назад

You can get a signal through but there is some interference.

@johnb6084 Год назад

It looks like that rod might fit in a spiral fishing rod holder, Walmart sells the Ozark Trail rod holders for less than 3 bucks. What's the diameter of that rod at the base? I measured the inside diameter of the rodholder with calipers and they are about 31mm.

@HAMRADIODUDE Год назад

Off hand I don't know the diameter, but it does fit in the orange fishing pole holders from Walmart

@johnb6084 Год назад

@@HAMRADIODUDE Thanks for the response. That's what I have, the orange sturdy rod holders. It looks like I might have to buy the rod and give it a shot.

@HAMRADIODUDE Год назад

If you have a few days/week, I'm working on an update video / comparison

@johnb6084 Год назад

@@HAMRADIODUDE Perfect, thanks

@Screamingtut 2 года назад

second

@HAMRADIODUDE 2 года назад

Thanks for watching. Wishing you the beset, Kristyanna

@enginedave 5 месяцев назад

Harbor fright

@kylefreemason Год назад

Do you still recommend this ?

@HAMRADIODUDE Год назад

I like this one. Have a good one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Sp7HUN3e-Ak.html

@burkhardgerken4205 2 года назад

What's the name of the camera bag?

@HAMRADIODUDE 2 года назад

Good day! It is a bag for my bicycle: pedegoelectricbikes.com/product/pedego-trunk-bag/. Have a good one!

@jasonpeterson3214 2 года назад

Dude, I was scanning the tube on antennas and this one popped up ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wVu8892xFk0.html I watched it ant was on pins and needles through most of it. Your video also popped up so here I am. I watch and give thumbs up but as a rule don't comment. Now I will finish watching your video. lol