The message that pops up with my alarm in the morning says "BE KIND" . It is the very first thing I see when I wake up. Even though I continue to have my struggles, I believe that every time I wake up and see that message and start my day with that mentality I am improving my life and hopefully the lives of everyone around me. Buckin,you are the main reason for me to have decided to change my outlook and actions. I started watching your videos to learn about tree work but I didnt know it would influence me to finally want to change entire life and become the best person I can. Thank you so much
14:25 I love my m tronic saw, never have to worry about it’s setting. Just start it and go. I like the snap the electronic carbs have, the throttle response is so nice.
This is all Greek to me, I have not used a chain saw in my life. I think that at my age, I don't need another hobby and or trade. The video was a great informative lesson, thanks to Billy, again, you have made me a believer that you are at the top of your trade. The two Axe's are beautiful, they seem to do the splitting job great. Either would be an asset in gathering firewood. However; here in SE Louisiana, I don't use more than one cord of firewood during our mild winters, our fireplaces are used for enjoyment, not heating. Jona did a beautiful forging job on the Axe bit/head, it will make a fine Axe in end.
I have the MS462-CM with a 32” bar. Full house, hand filed, it’ll cut through a 32” solid red oak trunk in a heartbeat. I use the MS201-CM for small trees and limbing. Love the electronic stuff.
What’s up bud. Keep workin. Keep your nose to the grind stone. Be YOU. Don’t try to fit in. Do what’s right and be kind and you’ll grow to be better each day that passes. Stay positive and follow your spirit.
Enjoyed cutting trees Yesterday. "Sunday" Was fun cutting the many methods for each tree. And especially those super leaners . Had a fun time getting that 1 leaner , to fall opposite of where it was sitting. Thanks a bunch
Oh friends, I needed this video today. Just a horrible day at work. Got passed over for a promotion for a relative of the boss. I'm finding it really hard to stay positive today, friends. But this helped a little. Hope you all are having a better day than I am. Cheers friends.
Billy if you haven’t done it yet, DO IT. I just picked one of these up today because I needed, well really wanted something with more power. I ran a gallon of the husqvarna fuel through it just cutting logs seating the rings at 1/4 1/2 throttle. After I finished breaking it in I let her eat and holy cow man, I’m selling my 461 so I can get this saw worked. It’s an animal brother. The best part is it starts so easily. 3 pulls even brand new. After its run for a bit it’s 1 pull no choke even after sitting for 40 minutes. Husqvarna really did something with these 572’s man. I’m gonna have to see if I can’t take some videos myself. This saw gets me excited. Something I haven’t felt working a saw in a hot minute. I WANT to pick this thing up. It’s dark out and I still wanna go cut 😂
Every human. Keep working. Keep DOING. Keep your nose to the grind stone. Be YOU. Don’t try to fit in. Do what’s right and be kind and you’ll grow to be better each day that passes. Stay positive and follow your spirit. BEST WISHES TO LANDFILL!
Hi to all. Im giving my 372 a blast tomorrow. Cant wait to hear the old girl fire up.Shes been sitting a while. 3rd pull and shes a goer! Take care everyone.
I have run a 572 xo an man that's the best saw in the world you just need to be used of it but man that saw is strong and ergonomic man I recommended everybody that search a new professional saw.
Now I know what to replace my 372xp with when it dies 15 years old now but still strong but it is me that is not so strong now and the balance of the 572xp looks inviting to my lower back so perhaps before it dies?
I'm a new subscriber! I just found your channel. Man...I love it! My first job was splitting wood when I was 15. Then I worked at a sawmill for 20 years. I would of still been there if they hadn't closed down. I worked my way up from stacking lumber to a Sawyer. And everything else in between. I would saw the logs into lumber. And even helped work on the band saws. They were 47 1/2 feet long, 12 inches wide and had 282 teeth. Miss that kind of work! It was hard! But...man I was strong as a bull. What is left of me is still strong! But...I'm 52 now. I did alot of stupid things thinking I was superman! lol. I'm on disability now because of it. But...man, I would give anything to do it all over again. I'm so glad I found your channel. This Bama man thanks you! For all that you do. 😊😊👍👍👊👊💪💪
I’ve built one in a little “hotter” state of tune than what you see in this video ... sweet saw with lotsa potential and great mileage to boot - and this is comin from a STIHL guy 😂 ... My 462c cuts a fuzz quicker but the 572xp definitely has it beat from a start / stop tickle the wood scenario ...
Oh yeah Buckin I love the handle bar design. My 570 XTorq has the same style handle. Mine is a bit big for my smaller hands but I love it. That axe is just PLUMB TAZZIELICIOUS BROTGER WOW. Thank you Donny Walker. Thoughts and prayers for Landfill and Becky Davis. Love you all. 🌲❤🌲✊
Wonderful video, Buckin’. Really enjoyed seeing the 572, and especially enjoyed the prototype of the new axe. Stay healthy and happy, my friend. Be kind folks! Have a truly great day. 🪓☀️✊🏼🧡
Mmm Mmm Mr. Walker Sure Knows His Business, She Sure Cuts Eh ? Love Them Steel Splitters ! Prayers For Land-Fill & Family & Hugs & Prayers For Bo Bo & Family ! Be Well All ! ATB T God Bless
Another great video BBR! Fantastic saw from Donny Walker!! I can see you testing the kahonas off of it haha. Love those two axes very nice and the very last one....the prototype...just wonderful. Take care and be safe, love and kindness to one and all. Graham🇬🇧🇬🇧🌲🌲🌲🌲
Not putting the saw down, had a guy that worked for me that had one and he loved it. The saw really seemed to cut, but with my experience Husqvarna saws seem to flat bog to a stop with no chance to recover rpm. I'm a Stihl fan but have many Husqvarna saws up to the 3120. Pro saws only no matter what brand you like, everyone has to compete in the economy market.
Landfill, hey buddy, if ya read the comments know I'm thinking of ya and sending good energy and love your way from here in Oregon. 🤗 Man, that axe looks out of this world, a true Buckin special. Knarly profile! Hope everyone's doing well, love ya all, take care.
Hey Buckin, Rhett here from Kelowna. Just subbed and I love your videos and your attitude and I gotta say you inspire me to change. I'm an angry guy and your attitude is inspiring. Thanks for what and how you share.
New forged axe head is a beast! Love the mirror polish. As far as trimming down full-sized heads to make cruisers, I'm thinking that drawing the temper out of the edge might be a concern... unless you've got a friend with a water jet!
Second comment here... If Mr. Walker can get one, running the new Stihl 500i vs. that 572 would be a good test. Stihl pretty much released the 500i to make it's 462 obsolete. The power to weight ratio of the new fuel injected saw pretty much spanks the old technology. In any case, that would be a true test of each brand's current top of the line saw, although the 462 would be much closer in power to that 572.
Thank you folks for all your thoughts and prayers during my fight with covid 19 I felt each and every one of you and i truly appreciate everything you've done i am on the mend and look forward to being back in the comment sections thank you
Glad to see you winning the fight against this virus. Recovering from jt myself and it's certainly a little different than your run of the mill cold. Godspeed and best of luck to ya!
Wow! Nothing like Donny Walker handing you a beast like that! Looks like it performs exceedingly well! Love to all new subscribers and comrades. Sending out a special prayer for Becky and Landfill Rat!🙏🙏🙏🙏 Lieutenant Bradley
Does that 572 have auto tune? I got one of those saws and I could only get it in auto tune. I wanted a 576 without auto tune but the 572 was all they had. It was 200 off I don’t know if it’s a good thing or because they have issues
I've had a Husky climbing saw that doubles as a paper weight for the last twenty years. It was the last Husky I'll ever buy. 550.00 new and problems since day 1. Was constantly in and out of the repair shop. Biggest piece of crap I ever owned. Looks real pretty sitting in my shop next to a magnesium case home light with a bucking bar. That saw still runs perfect BTW 😅
@@jkgkjgkijk Easy now, I was just saying that it sounds like you were just unlucky with your one purchase and gently implying that maybe you shouldn't write the brand off for evermore as a result. If you disagree, cool, but that was the point. I thought this was a politics-free zone?
@@BuckinBillyRaySmith okay and a friend of mine has one and he was telling me a little bit about it and I guess I misunderstood what he was telling me on its size
Hi there Billy 572 is nice saw Can't wait to see what you think of the stihl 462 I was so fond of my old 066 till I got 462 or maybe I just getting older Love from Eire Gerry the Miller
@@MrDoofbooble watch my video called Husqvarna chainsaw cutting palm trees. The thumbnail shows the large palm. 2 foot across. Palms are full of sand and are known to while out chains fast!
@@GreatLakesLogger yea me to, especially over the old husky setup. if you have an old stihl with an normal carb or m tronic the switch is the same exact same, that cant be said for husky
Greetings Brother Buckin'!...interesting video of that Husky autotune saw, I have run a Jonsered CS2252 ulticor (basically a Husky saw with red paint)pro grade saw for about 3 years. It is a screamer for sure and needs to run full squirt. They have a different starting procedure to older saws and can be a pig to start of you don't follow the instructions.
Hello all! Sorry I missed everyone yesterday. I disappointed myself trust me. I love the saw there boys! My poulan runs like that has that fuel system definitely something to get use to lol. Love ya all!
That 572 sure does run nice! I’ve been kinda hit or miss lately with videos but I’m not sure what happened to landfill but he will definitely be in the thoughts and prayers. Love to you and the family❤️
That 572 is an animal in its element. However, I know it'd take some getting used to as I'm also more accustomed to saws with more bottom, and prefer that style of power delivery normally. I ran a stihl 038avs a lot along with an 034av and now run a echo 590 muffler modded and a muffler modded 394, so going to a screamer with less bottom would be very different. I feel that this is why the ms500i has such high praise because it has the screaming traits but also has bottom end that the 462 and 572 don't have so much of. Even though several tests where all 3 saws wear the same bar and chain typically puts the 500i in last place when self feeding alone. I'd guess that anything more than self feeding the results would flip, as well as when you get closer to needing a sharpening. Albeit all 3 saws seem to be about even save a couple 1/10ths here and there. No replacement for displacement I suppose. I'm real excited to see your reviews of the 462, and eventually the 500i. Rumor has it their is a 595xp in the works. It's due, as the 394/395 platform is pushing 30 years old now. That saw will likely be a game changer as well. Pretty pumped for that update as well.
Very nice to know! Ive been on the verge of getting a ms 462 but might wait now to see the comparison and thoughts. Ive got a 372xp right now and the weight of the 462 is what peaks my interest. Im sure both saws are great but its a tough choice. Thanks for the entertainment Buckin"!
Hey Buckin glad to see another great video! Thanks. I can't wait to see that axe get some action, it looks like a splitter that's for sure. Anyway all the best from Northern California. P.s. tell landfill we are thinking of him
