Powder Coating On My YZ250 Build With Crazy Results! Part 4

Подписаться 88 тыс.

Просмотров 218 тыс.

50% 1

In this video, I Powder Coat the parts on my YZ250 two-stroke project. The parts came out absolutely amazing and should hold up for years to come on this dirt bike build. If this video strikes your interest in powder coating stay tuned to the end of the video for a link to my in-depth powder coating video.
Help support the channel and shop my favorite tools at The D Zone- thed.zone/product-tag/tool-co...
My Favorite Engine Tools- thed.zone/product-tag/engine-...
Products Used:
Prismatic Powders- www.prismaticpowders.com/?utm...
Colors used in this video- super chrome & anodized blue
Oven- amzn.to/2O93VeC
Eastwood Painting Prep- www.eastwood.com/eastwood-pre...
Powder Coating Gun- www.eastwood.com/dual-voltage...
Instagram: @adampaganelli
Business email: pagsli34@gmail.com
Music:
Song: Nekzlo - Palm Shadows (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Nekzlo - Palm Shadows ...
Song: Skylike - Imaginary (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Skylike - Imaginary (V...
Song: SKANDR - Summer Booty (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • SKANDR - Summer Booty ...
Song: High Rule - Control (Instrumental) (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • High Rule - Control (I...
Song: MBB - Fresh (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • MBB - Fresh (Vlog No C...
Rural Disturbance - Stacked
/ stacked
/ ruraldisturbance
/ @brosinsmusic
Rural Disturbance - Road Trip
/ road-trip-87bpm
/ ruraldisturbance
/ @brosinsmusic

Хобби

Опубликовано:

17 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 213

@adampaganelli4891 4 года назад

Thanks for watching! If you are looking for a way to support the channel consider shopping for your Powersports parts at The D Zone. I also put together a list of my most commonly used tools for you guys to reference- thed.zone/product-tag/tool-collection/?count=36&orderby=popularity&ref=AP34

@tylersvensson4468 4 года назад

Adam Paganelli i think you should do it like the Jeske yz125 as that bike looks insane

@charliehannan9465 4 года назад

Adam Paganelli black

@therightreverendrawhide7587 4 года назад

Another shade of blue ?

@raptormx9502 4 года назад

Dark grey or black

@charlesxavier9640 4 года назад

Weinkle black

@erichildreth7562 4 года назад

Man you did an amazing job on the powder coating and that blue looks amazing!! Can't wait to see the frame!!

@adampaganelli4891 4 года назад

Thanks Eric!

@BTR2018 4 года назад

Dude, it looks amazing!! thanks for the inspiration:))

@yamahaxs6501 3 года назад

just catching up with some of your older vids. Your builds are top notch!

@monzarace 4 года назад

Extremely nice, almost looking like some sort of thick blue crome. Well done! Kind regards

@FULLTHROTTLEFILMZ 4 года назад

Heck yeh bro that is a slick blue! Can’t wait to see the frame reveal!! Another great video 👍🏼

@adampaganelli4891 4 года назад

Thanks dawg!

@gs16gt90 3 года назад

Nice job love the blue , I’ll be putting that color on my mustang wheels , thx for all the links and useful tips , catch ya on the next one

@tomatoknuckles 4 года назад

Great job man love the colour. Excited to see what colour you went with for the frame👍

@adampaganelli4891 4 года назад

Thanks man, I appreciate the support!

@kieranmann9761 4 года назад

Looks amazing!! Perfect color for that YZ!!

@adampaganelli4891 4 года назад

Thanks Kieran!

@VlogEpicness 4 года назад

Well done. That looks soooo good 😍

@adampaganelli4891 4 года назад

Thanks man!

@robertturton8399 4 года назад

Great video Adam. Powder Visions will do an awesome job on the frame. They just finished a set of wheels for me and I highly recommend them!

@petrovicszsombor9945 4 года назад

When you done with the rebuild, then do a timlapse of it!

@adampaganelli4891 4 года назад

Okay sounds good!

@VasilyBuilds 4 года назад

The colors look fantastic!

@BTR2018 4 года назад

Vasily Custom Builds: How u feeling buddy, glad to see u on here.

@VasilyBuilds 4 года назад

@@BTR2018 I'm great. I'm working on some videos for this month

@BTR2018 4 года назад

Glad to hear your better:)

@adampaganelli4891 4 года назад

Thanks dawg

@danssv8 4 года назад

Wow nice , love it

@jimmadonna1436 4 года назад

Nice work! Love the color and results. Looks great!

@adampaganelli4891 4 года назад

Thanks Jim!

@jimmadonna1436 4 года назад

@@adampaganelli4891 thanks for making great videos that showcase your talents.

@edwardmcewen 4 года назад

That powdercoat looks amazing!

@adampaganelli4891 4 года назад

Thanks man!

@backyardprojects8153 3 года назад

This is a epic color

@mantaship 4 года назад

Gorgeous blue!

@laloutre3180 4 года назад

just amazing !!!! very very good job mate 👍👍👍👍👍

@adampaganelli4891 4 года назад

Thank you!

@laloutre3180 4 года назад

@@adampaganelli4891 a great pleasure to follow your great job in France 🦾

@maneljoaquim4047 4 года назад

damnnnn the parts are insanee!!!!!!! very cool video

@adampaganelli4891 4 года назад

Thank you!

@richardupyurass2379 4 года назад

Loads of work but holy crap that is killer looking. You are going to have a show bike that won't ever see the dirt

@UlisesGlez26 4 года назад

First! They look amazing man!

@adampaganelli4891 4 года назад

Thanks man!

@TastierBackInThe80s 4 года назад

Looks mint. Good choice of colour.

@adampaganelli4891 4 года назад

Thanks Jacen!

@AdrianGL301 4 года назад

Love this channel. So much $$$$ €€€€ saved when u learn basic mechanic stuff,

@adampaganelli4891 4 года назад

Thanks man!

@robheathcote8561 4 года назад

fantastic man, well done

@adampaganelli4891 4 года назад

Thanks Rob!

@ramawardana666 4 года назад

Yea i am really waiting your video dude

@adampaganelli4891 4 года назад

Thank you!

@highsnburgers4862 4 года назад

Great color!

@westcoastmotox5850 4 года назад

Hi there bro you have done it again nice vid mate love the Finnish you got on them parts I have yz 450 coming up on one of my vids in the next few wks you have gave me so good ideas on how to really bling it up keep it going mate and god bless

@adampaganelli4891 4 года назад

Thanks man! I appreciate it.

@kylelosacco3355 4 года назад

Those look so sick!

@adampaganelli4891 4 года назад

Thanks man!

@BrokenSprocket 4 года назад

Another great video keep up the good work..

@adampaganelli4891 4 года назад

Thanks man!

@jonryan391 4 года назад

Whenever I make something with my everlast welder I always struggle with how to finish it. Powder coat would be fantastic.

@horexwerkstatt7010 4 года назад

Cool. .. good Job! Regards Alex from Germany

@javierredondo756 Год назад

Beautiful me encanta el resultado 👍

@felipepeters9723 4 года назад

Holy smokes dude fantastic job on the hubs and springs! Have you ever tried any of the other anodized powders from prismatic? I’m looking to powder my hubs an anodized copper.

@diykrugliash9925 4 года назад

Super!

@motoblast3574 4 года назад

awesome results

@adampaganelli4891 4 года назад

Thanks man!

@coatingsplatingsjas1powder557 4 года назад

Good job man your made for this

@user-fy7gt6ev5u 4 года назад

Beautiful blue!… Maybe just a hair lighter but awesome job love it

@jeremyboje2247 4 года назад

Good job man

@adampaganelli4891 4 года назад

Thank you! I’m glad you’re enjoying the series.

@sebastianlootus6950 4 года назад

love it, you competing with Cameron Niemela

@mountainvalleyfrost5777 4 года назад

I don't think he's competing as much as learning and then giving his own twist on a build. And they are both Pacific Northwest boys, just doing things that they enjoy. I've even contemplated doing a build or two.

@sebastianlootus6950 4 года назад

Mountain Valley Frost agreed

@BrokenSprocket 4 года назад

Building bikes is not a new thing lots of people do this stuff.

@marvinsmeal8079 4 года назад

He’s definitely inspired by niemela which is awesome to see Cameron have that effect. This kids good!

@throttlefamily4655 4 года назад

Great video gave us a ton of ideas for our builds!!! Keep up the great work!

@sttm1283 4 года назад

awesome.

@wenethmoon6587 4 года назад

ouch I was getting hyped watching the pre-heat thinking there was going to be some hot spraying, shit looks so satisfying, but really I hope you know once you've blasted you shouldn't be touching it again with any cleaning product like please don't do that I almost cried at that point 😂

@kevinlatinski826 4 года назад

Trent Reid that’s funny I’ve been powdercoating for almost 20 years . Like big heavy batch coatings and a ton of custom coatings . To this day I still only hot coat unless I’m too coating with clear . It’s soooooo satisfying hahaha

@gabrieldean9559 4 года назад

Great video! What size compressor and how much psi for the blasting? Thanks in advance!

@borna9842 4 года назад

Glad to see you doing another build Adam... Wanted to know, after the wheel hubs come done from the owen what do you do to clean the inside of the hub (the shaft hole lol) from all the powder that comes in while coating?

@adampaganelli4891 4 года назад

Thank you! I masked off the inside of the bearing race. Other then that it’s not a clearance fit for the collar piece so there’s no need to clean any overspray as it will not be visible or effect performance.

@johnpickrell3028 4 года назад

Great job, thx.

@adampaganelli4891 4 года назад

No problem!

@andrewbodey5025 4 года назад

Just curious, what size HP air compressor do you run for the sand blaster?

@dny9394 4 года назад

Hi Adam. With all those delicate threads to protect why didn't you Soda-blast? It's quite gentle but adequate for the pretty clean job you're doing, and rinses out leaving no residue, a double benefit for delicate threads etc. Would save you a lot of tedious work blocking off then unblocking. Just my 2c. Great series by the way, doing a good job. Like the music too..

@soxh8ter 3 года назад

what media do you use for your blasting? turned out amazing

@JohnnyArtoff 3 года назад

buddy of mine powder coated a frame it wore right off make sure to buy frame guards!!

@davidhollyfield9712 4 года назад

What sandblaster do you have and what tip are you using on the gun and which sand do you use that seems to work very good

@zeljkomarkanovic23 3 года назад

Thanks for link i order cheater blue.In Croatia doesnt exist :D

@ludovicpernot9691 3 года назад

Good evening, Do you have any link for the purchase of the sandblasting booth gun nozzles? The one you use looks better than the original ones thank you in advance

@RanGer-498 4 года назад

Walmart has that same oven Hamilton Beach 31107D for $74.84 cheaper than amazon and free shipping as well. Save some bucks...btw good vid.

@silkcustoms520 4 года назад

Hey Adam, For sandblasting, what material do u recommend. I just got Glass bead delivered but did not try it yet. I used sand last time and worked ok. Thanks Bud. Mad Skills

@adampaganelli4891 4 года назад

Thanks Scott. I recommend using 100grit alluminum oxide for cerakote if you’re just doing powder coat glass bead works as well. A lot of powder coating shops use Garnett

@stantheman5005 4 года назад

Great job but what happen with spring after high temperature

@travisk5589 4 года назад

How did you keep the powder out of the inside of the hubs? And doesn't the hooks used for hanging the parts leave a mark in the powder

@gerrykehoe9807 4 года назад

Very nice.

@adampaganelli4891 4 года назад

Thank you!

@grupoladiferencia7032 Год назад

Good job 🤩, How can I get that color? I want to paint the frame of my quad

@TheMrjosef11 4 года назад

Super

@rafaelmercado5771 9 месяцев назад

Can you spray primer with the Eastwood powder coating gun ?

@slickricktheruler 4 года назад

If it were up to me I would of NOT powder coated the frame. But I am very interested in seeing how it comes out. 👍🏼

@adampaganelli4891 4 года назад

Thanks Richard. I was going back forth. Eventually I decided to do it just to experience something I haven’t done before.

@jonthelamb4549 4 года назад

Adam Paganelli I’m sure it will look sick if I did it I would get frame guards before riding so it won’t rub of

@TheBushcraftBrothers 4 года назад

Came out awesome man. How much was the frame to get powder coated? I would think it's not too bad since you did the prep.

@adampaganelli4891 4 года назад

Thanks Cole, They’re not going to charge me but I will ask in the next video how much it would cost so you guys know what they charge.

@fromthearea3147 4 года назад

How long does powder coating hubs and stuff hold up to chips and natural wear?

@NTRGFX 4 года назад

Hey Adam, where did you get that spanner wrench for the shock nut? I looked on RMATV but couldn’t find one.

@adampaganelli4891 4 года назад

It’s actually a steering stem one but it works on the shocks as well. Not a perfect fit but it’s better then hammering on them for 30 minutes haha. I got it from RMATVMC it’s one of there tusk tools.

@FranciscoPerez-be3sm 4 года назад

Hello, from Argentina

@garzamotostaller716 3 года назад

Hello, how are you? Greetings from Mexico? I would like to know what machine you use to paint and what kind of oven do you use? I hope you can help me greetings

@jasonsutterfield6968 4 месяца назад

what blast cabinet are you using? I need to upgrade!

@therightreverendrawhide7587 4 года назад

Awesome finish ...is it possible to flip-flop colours with this stuff (2-tone)..?

@adampaganelli4891 4 года назад

I am not sure. Check out there website through the link in my bio.

@Yourvideosaretrash Год назад

what media are you using to sandblast dirtbike parts?

@jvazquez7705 3 года назад

What do you use for the time blessing black diamond

@CraftwerksMC 4 года назад

Adam, great video. Just curios what blast cabinet you are using here and what pressure are you running it at?

@adampaganelli4891 4 года назад

Thank you! The blast cabinet is a mod-u-blast E series cabinet. Great cabinet that I found used for a good price. I recommend finding one in a similar category used to save money. The psi is around 80

@CraftwerksMC 4 года назад

@@adampaganelli4891 One other question and sorry to bother but I was curious what the brand and model was on those ovens. As weird as it is to say I have a much larger oven but I would like to pick up something similar to yours for small parts and doing single items, degassing small stuff and similar things like that. My 4 x 3 x 3 is great but cranking it up to do some MC calipers or a Master Cylinder is overkill, lol.

@jmg.86 4 года назад

How many lb of powder did you use to all pieces? Great work!

@spydergs07 4 года назад

Those small pieces should barely use but a few ounces.

@michaeljtalkington7960 4 года назад

Why did you chrome before the blue powder coating?

@elcucuygarage 4 года назад

Adam, where you out of man? I grew up in Thurston area and keep seeing people mention you're from the "Pacific NW"

@adampaganelli4891 4 года назад

Kent area!

@elcucuygarage 4 года назад

@@adampaganelli4891 sick man, I was in Renton for awhile growing up so real close.

@ottotiikkainen9056 2 года назад

how big is that sand blaster and what modes is it?

@chaunceydixon9329 4 года назад

How much u charge for a set of Harley wheels 23 front 18 rear in blue chrome???

@Aberta94 4 года назад

Why did you use crome first and colour later?

@davidheru8896 4 года назад

👍👍👍

@bjputvain 4 года назад

what is your media blaster and what cfm is your air compressor?

@illhaveanother4365 3 года назад

Will the bearing puller destroy the bearings?

@roadassassin9445 2 года назад

Awesome how much would something like that cost

@mikecasey3055 4 года назад

This is amazing man, I’m thinking about getting a powdercoat we from Eastwood.com I hope it works well. What do you think?

@mikecasey3055 4 года назад

Didn’t know you was using an Eastwood lol I take it it’s good! 😂

@alexsedlmeir7517 4 года назад

Hey my englisch is not the best could you tell me the name of the colours you have used please because i didn't understand? This looks awesome😍

@adampaganelli4891 4 года назад

Anodized blue and super chrome

@leec48s45 4 года назад

Adam, what sand blasting cabinet did you use?

@adampaganelli4891 4 года назад

It’s a used one I’m not sure on brand. My advice is look for a nice used one in the 300-600 range and make sure it has a built in vac.

@farim7881 4 года назад

What did you use to plug those holes ?

@romyaguila 3 года назад

how much per hub sir for the powder coating

@markgomez7640 4 года назад

what toaster oven do you have

@Fulcra 3 года назад

How did you learn to powder coat

@vsego.horoshego. 4 года назад

Hello from Russia! What kind of installation for degreasing how to find it ??? 8:15

@yatesfamily5497 4 года назад

What is the media you use in your sandblasted?

@adampaganelli4891 4 года назад

Alluminum oxide

@MeGuess_Adventures 4 года назад

What solution do you use in the parts washer??

@adampaganelli4891 4 года назад

Costco oil eater mix or simple green

@exhaustfumes927 4 года назад

Hey man what kind of blasting material are u using in the cabinet

@adampaganelli4891 4 года назад

Alluminum oxide 100 grit

@exhaustfumes927 4 года назад

Adam Paganelli thanks man

@Jebb209 4 года назад

What blasting material do you use?

@adampaganelli4891 4 года назад

100 grit alluminum oxide

@miegoreng5412 4 года назад

Nice adam who part5

@giovannivillani3481 4 года назад

Sei italiano/di origine italiana? Vedendo il cognome.. So much love, yamaha💙

@mackmotorsports1447 4 года назад

What air compressor do you use for your sand blaster

@adampaganelli4891 4 года назад

It’s a maxus 5 hp that does about 5.5 CFH at 90psi. It’s barely enough for the blaster so I would recommend getting something a little better.

@mackmotorsports1447 4 года назад

Adam Paganelli yah it looks like it works great when your sand blasting.

@blakelehman9803 4 года назад

Damn dude if I can pop that for you😬

@nickd4579 4 года назад

why would someone not tape off where the bearings go

@yeetskeetledeet8184 4 года назад

What area are you from? I’m from tri cities in Washington

@adampaganelli4891 4 года назад

Nice man. I’m more in the Seattle area