Power For 300,000 people! The 60 Ton Industrial Steam Turbine!

Подписаться 13 тыс.

Просмотров 100 тыс.

50% 1

Let's get nerdy about these CRAZY machines that weigh TONS and produce enough power for 300,000 humans. Siemens let us come by their Gorlitz facility and take a tour of their Industrial Steam Turbine assembly shop. We of course filmed the tour, and I hope you enjoy it.
Hit up the MAIN CHANNEL
/ 3dprintingnerd
You can support what we do in many way!
Buy me a coffee: buymeacoff.ee/3dprintingnerd
Ko-fi: www.ko-fi.com/joeltelling
Patreon: 3d.pn/patreon
Floatplane: www.floatplane.com/channel/3d...
Follow Sean Connelly on Patreon:
/ theseanconnelly
Follow David Tobin on Instagram
/ david_tobin
Some of the following are affiliate links:
Amazon (aff): geni.us/shopatamazon
Raise3D: raise3d.com
Magigoo: thought3d.com
Matterhackers BUILD series filaments (aff) : 3d.pn/mhbuild
Matterhackers 3D Printers (aff) : 3d.pn/mhprinters
Proto Pasta (aff): 3d.pn/protopasta
Prusa (aff): 3d.pn/prusa
Puget Systems: 3d.pn/pugetsystems
Channel Merch Shop : 3d.pn/shop
--------------------------------
Find Me Socially!
--------------------------------
Twitch : / joeltelling
Twitter : / joeltelling
Facebook : / 3dprintingnerd
Instagram : / joeltelling
Discord: / discord
--------------------------------
Want to send me something?
--------------------------------
3D Printing Nerd
PO Box 55532
Shoreline, WA 98155
USA
Music provided by futurevega.sourceaudio.com
Royalty Free Music by www.audiomicro.com/royalty-fre...
FTC Disclaimer: A percentage of sales is made through Affiliate links

Наука

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 121

@JVanore 4 года назад

Incredible! This reminds me of a how it's made episode 😊

@Telephonebill51 Год назад

Except that there was nothing whatsoever about how it was made.

@georgeliu7575 Год назад

I worked in an industrial steam turbine factory of Siemens partner in China for 12 years. I like the art-of-the-state Siemens- designed steam turbine products so much. The job experience there shaped me a lot and benefited my later job. Simens is great!

@deadsi Год назад

I too love semens

@knutholt3486 3 года назад

What impresses me is not the size of the thing. What is impressive is that it actually is small compared to the work it does.

@jeanwycliffeahorukomeye7479 2 года назад

This is deep 😉 im watching this video in loop thinking visiting the Siemens factory myself. Any references for a tour ? Dhr Detlef Haje?

@brianthesnail3815 10 месяцев назад

The biggest heavy frame industrial gas turbines that Siemens come in at over 500 MW and weight over 500 tonnes. The waste heat coming out the back of those goes through a heat recovery steam generator that creates steam which is then put through one of the steam turbines in this video. The so called combined cycle gas turbine power plant is a gas turbine, a heat recovery steam generator and a steam turbine running in combination and have very high heat efficiencies.

@JohnOCFII 4 года назад

Very cool, Joel. The size and precision are amazing. Thanks for sharing with us.

@michaelc8264 4 года назад

Incredibly cool stuff! Glad you could share this with us!!!

@AluminumOxide Год назад

What makes it more cool is the fact that the central shaft is made from a 100 tonne single piece of forged steel that was once red hot and squeezed in a hydraulic press into shape.

@bradpetersen92126 Год назад

The Navy Destroyers I served on had the high-pressure and low-pressure steam turbines separate with the main steam entering in at 1200 psi at 975°F, exhausting out through a very large crossover pipe to the low-pressure turbine, then out the bottom to the saltwater condenser to be returned to water, and continue the cycle. Incredible machines….

@luckybenni3914 4 года назад

Been there last year - impressive factory. The CNC machines alone blew me away ...

@siyu313 2 года назад

That right there is a guy who enjoys his job! Im sure his kids are mini turbine engineers from all the free knowledge.

@RonFloyd 4 года назад

With my lengthy background with manual and CNC machining, this is fascinating to me! Thanks Joel.

@TechnicallyNerdy 4 года назад

Glad you liked it, Ron! Plus, that clearance OH WOW!

@NoNonsenseKnowHow 4 года назад

Very cool! I was just inside of one of these the other day at and abandoned Coal Power Plant. Made a pretty cool video of it

@Vinz3ntR 4 года назад

Extremely nerdy video, very interesting! Can't wait for the follow-up video!

@RomanoPRODUCTION 4 года назад

Thanks Siemens ❤

@TheMidnightSmith 4 года назад

DONT YOU DO THAT TO ME! DONT YOU END ON A CLIFFHANGER!!! For real though, I work with ones half this size daily, had no idea the clearance was so tiny! Some serious precision there!

@TechnicallyNerdy 4 года назад

Crazy precision, and the 3d printing story continues on the main channel tomorrow.

@Lamplighterone 4 года назад

I didn't want it to end!!! Can't wait for the additive manufacturing sequel ;) HF

@TechnicallyNerdy 4 года назад

hahahah return five! you'll see it tomorrow on the main channel! :)

@lexuannhi Год назад

I have always wondered how these giant turbines work. Now, thanks to you I know some. Just some of it. Wish I can see more.

@neiltaneo7308 2 года назад

Thank you for sharing sir, Happy New Year from Philippines 😇🎉🎊🎊

@JAYTEEAU 4 года назад

Wait, no, give me more... Fantastic Joel, looking forward to the next instalment. Cheers, JAYTEE

@mahmood964 2 года назад

Loved it... where is the sequel man!

@PacoOtis Год назад

Bravo! Excellent video!

@Matas3DCreations 3 года назад

thats so cool ! im looking into solar panels to power my 3d printers in my workshop gotta figure out the numbers first tho but now i really want to try it for the free energy every time i get a new 3d printer i notice my bill go up and up lol

@zhubajie6940 Год назад

And these are the tiny ones. We worked on 1000MW+ too along with similar Westinghouse legacy.

@bee398 3 года назад

Wow! Nice! Thumbs up!!! Thanks!

@remcovanwoerkom2016 Год назад

Really cool to see

@SouravBagchigoogleplus Год назад

Here we operate 800MW turbines and Main Steam pressure is above 300kg/cm^2

@izalman 3 года назад

Those rotors are small... I worked on machinery that overhauls rotors that weigh 250tons.. including lifting them from horizontal to vertical to dismantle / re assemble them and true up all the mating surfaces to minimise supersonic speed steam disruption.

@jacoblocklear6809 2 года назад

What size was the lathe that trued it up

@ShainAndrews Год назад

Never would have expected 160 bar. Clearance between the stator and rotor is tight, even for the smaller sections. I have a feeling there is a specific start procedure that allows thermal normalization prior to rotation.

@paulcurrie7828 Год назад

Warming of the case and stretch out of the turbine rotor using steam for heat. Also the while this is happening the rotor is on barring gear turning very slow like 1 rpm to allow for the rotor sag between bearings to straighten out

@ShainAndrews Год назад

@@paulcurrie7828 Yup that was roughly what I estimated it would take.

@hugodesrosiers-plaisance3156 Год назад

That gentleman says "correct" in a very wholesome way.

@chuckaddison5134 Год назад

Are the blades replaceable, as they are in jet engine turbines? Also! What is the change in blade angle and spacing (rotor and stator) from beginning to end?

@dalsenov 7 месяцев назад

Impressive!

@discoverymoi 3 года назад

Are these the same ones used in nuclear reactors?

@gizmobowen 4 года назад

As a fellow Washingtonian the first thing I thought about when you said you were going to talk to Detlef was the famous UW basketball player, Detlef Schrempf. Maybe I'm the only one though....?

@pycharm708 3 года назад

I m in love with this stuff

@yuvrajram798 3 года назад

So incredible information

@TechnicallyNerdy 3 года назад

Glad you think so!

@CantGetEnoughBach 2 года назад

Wow!! when I was a college freshman I worked in the heating plant for the whole campus. We had a steam turbine-powered generator that could produce 500 KW as a backup power supply. It was far from the technology you just showed us. The patents were from 1905 or so. Could a modern turbine design efficiently power a locomotive? Much heat is wasted in a traditional steam locomotive because the spent steam is not recirculated as feedwater, which makes a lot of maintenance problems for boilers because of accumulating scale. But with modern design techniques and turbine-electric drives what level of efficiency could be achieved?

@FUZxxl Год назад

Main problem with a closed steam circuit in a locomotive is condensing the steam.

@3djimmy252 4 года назад

SPIN ME RIGHT ROUND BABY .. RIGHT ROUND !

@scottstensland Год назад

the Siemens rep should have explained each rotating blade sliver is sandwiched between a static blade unit ... these turbines have dozens of these pairs ... the steam escapes through each sliver ... the rotating section forces steam up followed by its static blade forcing steam direction down ... this tension powers the rotation

@komolkovathana8568 Год назад

I wonder, these main propulsion cannot be run by WASTE HEAT of lower than 250 °C of low pressure steam but they(turbine) need at least Main Source of 350°C, medium to high pressure steam to provide the power for 100,000- 300,000 people (250 MW).

@komolkovathana8568 Год назад

4:44 And he said 560°C @ 16 MPa (160 barg), that cannot be waste heat.?

@jedwards1211 3 года назад

0.4mm between the stator and the rotor on the smallest end 🤯

@geofferyromany4634 Год назад

I wonder what is the volume of steam needed to run it 24 hours?

@RagionamentiFinanziari 2 года назад

Very impressive

@moeniebdavids3033 3 года назад

Does anyone perhaps know where i can guy miniature turbine models?

@mozkitolife5437 4 года назад

Gah, left me hanging and got all steamed up.

@TechnicallyNerdy 4 года назад

Next video tomorrow on main channel :)

@mozkitolife5437 4 года назад

@@TechnicallyNerdy oh yeah, completely understand why you broke up the topics. Love it.

@k.fegleyvipergtsr20 4 года назад

yes joel we have 2 steam turbine generators at my job..a 50mw and 25 mw we put out 60mw to the electrical grid..

@TechnicallyNerdy 4 года назад

That's so cool!

@k.fegleyvipergtsr20 4 года назад

@@TechnicallyNerdy yes it is and ours spin at 3600 rpm

@gregorymalchuk272 4 года назад

@@k.fegleyvipergtsr20 What fuels them? Such small steam plants aren't very common these days.

@k.fegleyvipergtsr20 4 года назад

@@gregorymalchuk272 we burn 3000 tons of msw...munisipal soild waste..

@gregorymalchuk272 4 года назад

@@k.fegleyvipergtsr20 Ahh, cool! Which plant is this? I am interested in the technology? Also, do you know the steam temperature and pressure that you operate at?

@jonathanparone733 3 года назад

How much is the cost to buit that king of power plant

@l0I0I0I0 Год назад

Do they have a hydrogen steam energy yet? More important, where can we learn how to repair and operate one?

@wilfridseme4433 3 года назад

How much unit like this cost

@gepeszifju Год назад

How does it possible expanding steam lower than the environmental pressure (vacuum)?

@colinamwilliamson Год назад

Is there an advantage to not having compound turbines?

@CreativeSteve69 4 года назад

I always enjoy watching your videos. I usually don't do this but I came as fast as a steam turbine n was first. :)

@jvd0701 2 года назад

Wow, so beautiful, nice👍👏, i 'm working in 800 MW, super critical boiler, thermal power plant, GSECL, Gujarat, India🇮🇳🇮🇳

@stevedoe1630 Год назад

Nerd-up…. These turbines are so heavy that they need to be continuously spun, even slowly, when warm. The rotor is more malleable at higher temperatures, and is susceptible to imbalances.

@billshiff2060 Год назад

Speed of sound WHERE? In air At normal temp and pressure? Or the local speed of sound inside the turbine which is steam at high temperature and pressure... Which is it?

@flouserve Год назад

250Mw no es tanto, montones de centrales en España han tenido turbinas para generar 350Mw y si nos vamos a Manjung IV en Malasia, hay dos turbinas de vapor que mueven generadores de 1000Mw...

@therocinante3443 3 года назад

Wait.. where's the 3D printing? It seemed like we were about to see that and then the video abruptly ended lol

@poly_hexamethyl 3 года назад

2:41 Let's see...500 m/s = 0.5 km/s = 1800 km/hr = 1125 miles/hr. And presumably he means at the outer edge of the largest blade. By the looks of it, it's about twice as high as a person, so say 4m diameter or 12m circumference. So at 500 m/s that's about 42 revolutions/s = 2520 rpm. Not all that much, although I suppose it is a lot for such a large part operating a quite a high temperature.

@SDCustoms 3 года назад

Not very much rotational speed, but think about the massive amount of torque when it's cranking out 250MW.

@bapimurmu7738 3 года назад

@@SDCustoms what???? Not very much rotational speed???? Man,almost every thermal power plant turbine runs at the speed of 3000 rpm.... And that's a lot... Believe me... And for that huge rotor and blade assembly together... It's a lot.... Think about the perspective... Small things can really rotate very fast... But for that huge assembly, it's fast... So fast

@iwb316 3 года назад

3000 rpm = 50 Hz which is the power grid for most countries in the world, 3600 rpm = 60 Hz for North America

@steffen1182 4 года назад

Görlitz? Damn you were very close to me.

@TechnicallyNerdy 4 года назад

I really love the town!

@locklear308 3 года назад

THIS is how you make power.

@MaximumMatador Год назад

Please send some steam turbines to South Africa, we desperately need more power

@Andreschannel_SA Год назад

60-Ton turbin. Wow.

@Phil-D83 7 месяцев назад

Supercritical steam is awesome

@marynollaig4124 2 года назад

Excelent

@jasonlivi3039 3 года назад

It's great we can produce mechanical energy at such a low cost it would be nice if the consumers could feel that more. Look how much electric one turbine can make for years with little maintanance.

@harlockmbb Год назад

RU-vid recomended this video after the engineerguy video about turbine invention. :D

@anthonyrich1592 4 года назад

Is it just me, or did this interview seem to stop just as it was getting to the interesting part? How will 3D printing become involved in this? I hope to see a companion video the on 3D Printing Nerd channel Real Soon Now(tm).

@TechnicallyNerdy 4 года назад

Heh, you guessed it! It’s out on the main channel in 21 hours! (2pm pst Sunday)

@d.cypher2920 2 года назад

*"1 megawatt is the equivalent of 10 car engines."* that's actually very helpful for my mind to understand the equivalent power ratio and output. great videos. *kids, listen...learn science, technology, engineering and mathematics.* you'll have nice things, and that affords a more comfortable lifestyle. (And a better quality wife or husband. it's simple, not complicated.) ☀️😎🇺🇸☀️

@vistakay Год назад

1 MW is 1340 HP so 250 MW would be 335,000 HP 🤯

@SharhbiniRauf 2 года назад

Can they make hydrogen steam turbines ?

@jhbryaniv 4 года назад

How many jigawatts do they produce?

@TechnicallyNerdy 4 года назад

Definitely not 1.21

@jhbryaniv 4 года назад

@@TechnicallyNerdy #notinterested #longlivemarty

@jakobmarciszyn6890 2 года назад

Görlitz :)

@jvd0701 2 года назад

565 degree Celsius

@JGV_IX 3 года назад

You have to admire German quality! Very very impressive!

@jacoblocklear6809 2 года назад

Very True

@Ashtree81 3 года назад

The germans know their stuff

@johno9507 7 месяцев назад

160 Bar is about 2300psi 😳

@davejenner7966 Год назад

not so big, we ran 660 Mw units

@suniltyagi8232 3 года назад

IAM Sunil tyagi I am working in Bharat heavy electrical limited India in haridwar , State, uttarakhand IAM working stime turbine casing,jbc,LP casing in blade fiting work

@suniltyagi8232 3 года назад

Bhel making in hp turbine super critical 1000 magawat

@DK-sg3oe 3 года назад

Do they also rotate 3000rpm and how many tons is the rotor

@alansteyrbach6926 2 года назад

250 kWt for 60 kg turbine... interesting

@kira07 4 года назад

huh ? so its just a teaser? p.p

@TechnicallyNerdy 4 года назад

Heh. Next episode today on main channel.

@Njabzillah 3 года назад

Im offended, what do you mean by nerdy

@janzwiebel8518 4 года назад

Come on, just a teaser?

@TechnicallyNerdy 4 года назад

Yes :) next episode today!

@user-hj5nr3wy5w Год назад

German engineering at its best

@frankjames1955 2 года назад

300000 thanks? whats that ?

@parvenugaming4995 3 года назад

Detlef 3.6 roentgen not great not terrible if you get this like

@longhairddingus6970 4 года назад

Second!!!!!!!!!

@davidkowalewski8539 3 года назад

teslas greatest invention....

@toddr.4630 3 года назад

TRUEBINE BLIBBY,,, "turbine" just won't do ,, it's "TRUE-BINE", stib BLIBBY chibnine ✌️ YEEEEEE hhaaaaa ,,,,HORSEPOWER BABY !!¡! ,"can you hear them TRUEBINES sang ✌️😝