Power test comparison without and with valve block HDR50 T4E revolver 

Hi, yesterday I spent almost all day testing and we were right that these results from the X-radar chronometer are surprising. In fact, all the work is done by removing the valve block, I will explain everything thoroughly and show it in the next video that I am working on now and that will be what I wanted to show in this movie that you have already seen. I don't want to reveal the details now, but in my opinion it will be very interesting and it will dispel many doubts. Thanks a lot and I will be happy to talk after the next video, after which we will have an almost complete "picture" of this tuning method. Have a nice day.

@@MasakraChannel Cool,I guess not just me is waiting to see the result.So,finally all the community profits from your leg(I am mean today,I know).Hope it will be better soon.Take care.

Thank you very much.

@@MasakraChannel removed the valve block but now its farting co2. any idea how I could stop this? thank you

@@Walem_B is it 7.5j or 11j?

Cześć, cieszę się. Dzięki wielkie !

Hi, Thanks a lot, I will verify it yet because these results have raised new questions in my head 😀 Have a nice weekend Zgun 🎯💪

Hi FebsWhite 💪, thanks for the nice comment 😃have a nice day💪

Hi, yes it's true, the results are very surprising. Sometimes it happens that the answer to one question raises other questions 😃 I will verify it again and as I promised in the film, if there is a significant difference, I will try to find out why. Thanks a lot, have a nice weekend.

Hola, gracias por bonito comentario. Qué tenga un buen fin de semana. Saludos.

Hi Johnny, thanks a lot, have a nice weekend 💪

Hi, thanks a lot my friend, I broke the Achilles stitch, it was just that at a certain age I shouldn't have been playing football anymore 😅 I also wish you good health and successful tests 🎯📈 have a nice weekend my friend 💪

Cześć Sekuman, pewnie, jeszcze zdążymy się zestarzeć 😀 tak, mam 3, wyprodukowane w 2018,2020 i 2021, ale będę dopiero przyglądał się czy zaszły jakieś różnice, bo testów nigdy dość 😃 dzięki wielkie za fajny komentarz. Pozdrawiam.

Hola, muchas gracias amigo 💪 También les deseo buena salud y un exitoso y pacífico fin de semana. Muchas gracias amigo de nuevo 🎯💪

Hi, thanks a lot 💪 Apparently, sport is good for health, so I returned to playing football, but probably at a certain age it is not the best idea anymore 😅 Thanks again, have a nice weekend.

Hi my friend 😀 four legs are better than two, it is always better to have more, especially since two are made of aluminum 😂 Thanks a lot, have a nice weekend my friend 😀💪

Hej dzięki , to jest pierwsza rzecz którą zrobię😀 Miłego weekendu 😀💪

@@MasakraChannel Ustaliłeś coś? Zaskakuje mnie że nowy HDR miał aż 16J. To trochę więcej niż w instrukcji. Chciałbym taki egzemplarz.

Muchas gracias amigo, si las pruebas que estoy haciendo actualmente son exitosas, me pondré en contacto contigo porque tal vez pueda enviarte algo lindo. 😃💪

Hi AR, maybe there is something about it that you wrote about, without the valve block, the revolver is definitely louder when I look at later tests, e.g. pin test, I assume that the chronometers worked correctly.... Thanks for your opinion. Have a nice evening.

​@@MasakraChannel have you tried dieseling .....? i know it works with air guns so it must work with these ....you would be the first to try it.

Have done that on my HDP50. Red stift is 1mm shorter. Buy the one who are 2mm shorter instead..max power. Long tuning barrel..must have to all kit. (Homedefence24) Recommend 👍

Hej Byku 💪pewnie że wiem 😉, można to zobaczyć na moich wcześniejszych filmach, i jeszcze dodam kolejne filmy odnośnie pinów 😃 Jeszcze raz dzięki i jeszcze raz gratuluję wygranej w konkursie radiowym 👌 tak 3mać 🎤🎧💪

@@MasakraChannel nie wygraliśmy, weszliśmy jednak do finału 😉 ale dzięki bardzo 👊😎 Pozdrówki

Cześć Krzysztof, napisz do mnie priv na FB, w odpowiedzi wyślę Ci zdjęcia/video z potencjalnymi przyczynami. Miłego weekendu.

Hi Jose, which chamber change do you mean?

@@MasakraChannel sorry for my English im from Spain I mean the part where you take out the limitator that come from fabric the 11j version don’t bring it so there is nothing to take out on the 11j version and I hear that actually is a different so they have kit power for the 7.5j and the 11j looks like, but if you want to increase the power just drill 1.5mm the piece that go inside where you put the gas and that will increase really a lot the power and reduce 2mm the valve very carefully and it will go to the limit between 25j+ and 30j+++ I make it in my HDP50 and I just drilled the piece where go the gas at 1.5mm and the power is really feeling it and I still thinking have to make the job of the pin valve reduced 2mm and that is like buy the power kit but you can make the mods at home is not necessary buy the kits except that you will want to put the power down so use the kit and save the pieces, I hope you understand me again sorry for my English 😉👍🏻 I hope you get better soon from your leg Bro take care and thanks for the video 👍🏻✌🏻😎

It's ok, but you mean the insert with a hole in the gas chamber into which you put the CO2 capsule? (the insert is round)

@@MasakraChannel in minute 14:52 you open the chamber and take the destructor from there this is the chamber I mean, but also if you drill at 1.5mm I recommend no more than 2mm the piece that go where you put the bottle up you take it out with a big screwdriver 🪛 and take it out it will come very easy and drill to let pass more air to the Chamber in every shot you will have around 12 power shoots and maybe 6 more but very soft already so you will have drilled at 1.5mm around 18 shoots I think is super ok after the mod I’m talkin about this piece come in the power kit also already drilled Everything that that they sell in the power kit you can do it for free at home just be very carefully with the valve you have to make it hot because is like with some glue but the pin will go out easy if you make it hot with a lighter this is the pin that goes in the black piece where go the spring that also come reduced 2mm from the top and this two mods take the gun to the limit around 30j+++ is a beast I have de HDP but is the same mods in both because is almos the same gun the revolver I hear that you have to fix because some time shoot two shots so have to be very careful and also fix the thing that make the bullet roll to the next is a thing not difficult but I’m so happy with the HDP50 I love and now is so powerfully OMG it can really kill a person if you shoot him with the metal balls uffff the are brutal and the weight is around 8.6gr and shoot the like a beast it pass the metal like butter if you shoot around 5 or 10 mts is really a beast and is also the glass balls that they are like 3.5gr and the explote when they crash so if you plink wit them you can broke like 10 glass bottle with one shot put it them on line is really a beast I have a lot of guns but I never imagine that with co2 you can get this power is amazing I just simple love it and I really have it for self defense this one the HDP50 and I have the Glock gen5 cal.43 and the M&p9 from Smith and wesson both are amazing the s&w is more powerful 7.5j and the Glock 5joules and then I have one of my favorites also the CP2 from Zasdar is amazing it come a kit with two barrels one short and one long is very easy to power up and is super accurate where you shoot there goes the bullet and it comes already with 11j that is really power already and also bring a silencer very nice 👍🏻 that really reduce the sound of the shoot but a lot 😉, if you know how to make mods for the Glock gen5 and the s&w I don’t know still where is that I have to make that mod I think is just where you put the bullets where that mod should be but this tipe I don’t know how to power up if you know let me know is the same that use the WTP 1911 or the sap92 Swiss arms the copy of the Beretta 92 beautiful this one is 4.5mm but is same like the other ones so I think the mod should be make it in the place where you put the bullets and the gas u know? If you know how to make a mod in this kind of chargers let me know please 😉 big hug I hope u know now with chamber I mean or I call it chamber and maybe have another name jejeje 😜 so let me know if you know go to mod that kind of cargadores(where you put the bullets and the gas 😉 thanks and great video ✌🏻👍🏻

@@MasakraChannel yes 👍🏻

Hi Tom, no problem. On these chronometers (x-radar) it is not possible to set the weight of the balls. Therefore, in the summary in this video, I said that the results are "surprising" and that I will verify it yet, I have already done it. I'm just preparing another episode about valve pins (lenght comparison + without valve block) and it will be a reference to this video as well and I think I managed to dispel some doubts, in any case, it will be interesting and then I will be happy to talk about results.

@@MasakraChannel thanks for the reply great chanel and vids, cheers from the UK.

No problem, thanks a lot, regards to UK, have a nice day.

I had similar experience in the past with hot glue bullets and Umarex bullets. They tend to not form a good seal when exiting the barrel, and causing air to leak around it. This significantly reduced the kinetic energy of the bullet. My personal best results come from Devastator and steel ball bearing with really good fit to the drum and barrel. Also, in order to get really good performance, you need to change the barrel to a tuning barrel with longer extension. This resulted in significant increase in joule. Second I changed the HPA output. I used 3000psi bottle with 1100psi regulator, so it increased the output even higher. I tend to get around 50 to 60 joules when I do all of these. However, if you use an even longer tuning barrel, you can power tuning it even higher. I have seen someone on RU-vid demonstrated a 95 joule output. Hope this help.

Temperature..

Hi, What should I be afraid of? Yes, the balls were shot using the new co2 capsules, because only then does the comparison make sense...

Hej Marek, łatwiej będzie chyba samemu wymierzyć rzeczy które chcesz zmieścić do walizki i kupić walizkę następnie wypełnienie piankowe którego nie trzeba wycinać lub do samodzielnego wycięcia kształtów, wyjdzie to taniej, a też będzie ok , co do ofert typowo pod HDR niestety nie znam

Cześć, postaram się coś przygotować, w następnym odcinku już będzie większość co jest możliwe do zrobienia odnośnie pinów, na dniach będę sprawdzał jeszcze jedną możliwość, jak się uda to też dam znać. Pozdrawiam.

Super. Dzięki... Sam zostałem wczoraj szczęśliwym posiadaczem, stąd ten temat 😉

Cześć, na ebay itd lub www.homedefence-24.com/collections/hdr-51

Hej Damian, super, poczytałem trochę opinii o M1911 podobno bardzo dobry na początek przygody z AirSoft, jak Ty oceniasz jego wykonanie i użytkowanie? 🧐 Miłego długiego weekendu, chociaż pogoda średnia 🎯😀💪

Hi, I understand that you only dismantled the housing, right? what exactly do you have problem with?

@@MasakraChannel it just won't budge. I made a good strong hook tool that would have worked if the thing wasn't stuck. i understand it is hit or miss & i missed. I do not want to take it all the way apart. I have ordered a custom barrel & custom drum mag & i should feal better if they increase performance. i want to be careful w/ this hobbie as i have anxiety issues & can get overly emotional over keeping up w/ upgrades.But thank you for your interest.

A nie brakuje Ci małej sprężynki w mechanizmie spustowym? Też mi wypadła i rewolwer strzelał seriami .

Hej Marek, za 28 jest sam pin, krótszy o 2mm, a za 49,95 jest zestaw pin + wkładka do komory gazu, różnice w mocy biorą się głownie ze względu na objętość komory w której jest blok zaworu, no i czy wyciągniesz blok zaworu czy nie, nie mam wersji TR, ale to raczej jest tylko inna nazwa na inne rynki zbytu. Zapraszam Cię jutro o 16 do wspólnego obejrzenia mojego nowego filmu o pinach, będziemy mogli pogadać na live czacie o wynikach, może będzie ktoś jeszcze więc są szanse że uzyskasz więcej odpowiedzi, a jak nie to napisz do mnie na priv na fb po obejrzeniu filmu, to będę mógł Ci też więcej informacji udzielić i jakieś info zdjęcia przesłać. Miłego dnia.

@@MasakraChannel Dzięki. Film na pewno obejrzę :) Tylko czy ta wkładka do komory gazu jest potrzebna w wersji 11J? Z Twojego filmu o montażu tego zestawu wynika, że nie, ale wolę się upewnić.

Dzięki wielkie 💪 Wyciągnięcie jej robi całą robotę jeśli chodzi o zwiększenie mocy.

@@MasakraChannel Ok, czyli nie potrzebuję tego zestawu za 49, bo muszę tylko zainstalować krótszy pin i wyciągnąć wkładkę. tylko dalej nie kumam po co w takim razie w sklepie hd24 jest ten zestaw za 49 dla wersji 11 j :)

😃, bo sam pin chyba jest po 29, pozostały koszt to wkładka do komory gazu jak podaje producent o zwiększonej wytrzymałości i śruba, ja strzelam na oryginalnej wkładce i jest ok 😃

Hej Angel, kojarzysz "kartoflisko" ? to tak samo tylko że na hali😆 pozdrawiam 💪

@@MasakraChannel haha nieźle :D

Mi pare di no

Cześć, HDRem przebijałem chyba z ok 5m, gdzieś na starszych filmach to będzie. Jaki masz cel w porównaniu slinghota do HDR?🤔?

panel 9mm i hdrem robie dziury z 8 metrów bez problemu oczywiscie testowalem tylko dewastatory

Co z tego? Jaki ma sens porównanie? Może jeszcze zeby ten rx byl podonych rozmiarów, ale to strasznie nieporęczna krowa.

@@wojtekluberadzki4544 to pokaż bo nie wierzę

spróbuj jeszcze kulki PLB50 , radzą sobie świetnie jak na tą moc HDRa 😀💪

Doesn't work with co2

Hi, at the moment my English is not good enough and I don't feel comfortable, I hope the subtitles are good enough at the moment, sorry. Have a nice day.