Power Wheels Milwaukee Battery Upgrade RUNTIME TESTS & Battery Over Discharge Protection Install

Подписаться 8 тыс.

Просмотров 147 тыс.

50% 1

How long do the Milwaukee Batteries we installed in the Power Wheels Jeep last?! And - we'll protect them from over discharge with a battery discharge monitor circuit.
Part II of the Power Wheels / Milwaukee Battery Build
Components used in this project:
Low Voltage Battery Cutoff Module: amzn.to/2GeE3J5
Terminal Block: amzn.to/2NM33vx
Wire Ferrules & Crimper (similar style) amzn.to/3c8EhQo
3D Printed Milwaukee Battery Cradle: amzn.to/2xGK114
DC Motor Speed Regulator: amzn.to/2JulRxx
In-line ATC Fuse Holder: amzn.to/31k3Lo8
Molex Connectors and Pins: amzn.to/33fbOUL
Milwaukee 18V Red Lithium Battery: amzn.to/31iANVB
Schematics and other docs for this project available from havocware.com:
havocware.com/p...
DISCLAIMERS:
These links have an affiliate code, if you purchase items with these links I will receive a small commission at no additional cost to you. Thank you!
This video was not paid for by outside persons or manufacturers.
No equipment was supplied to me for this video.
The content of this video and my opinions were not reviewed or paid for by any outside persons.

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 494

@bryan7866 4 года назад

Such a cool dad makes me smile watching you with your daughter

@garynelson2885 4 года назад

@@roots4x qqw

@itsjaynguyen 3 года назад

legend has it his daughter is still driving around the warehouse

@TheCrazyMachinist 4 года назад

I'm 22, and used to have one of those types of jeep when I was little, and what you did is Awesome!

@havocware 4 года назад

Thanks Brendan! Cheers!

@morgangaushell9414 4 года назад

Outstanding videos! Professional, fun, and most importantly educational!. Thank you for your hardwork on these videos and the professionalism in work and editing. I can not wait to duplicate this on my childs first power wheel! Hats off to you bud!

@havocware 4 года назад

Thanks Morgan! Appreciate the kind remarks! Cheers!

@venrik8 4 года назад

Dude, your a genius for even attempting this!

@juniordelgiorno5260 4 года назад

#1 DIYer & Dad of the year! Awesome vid with explanations without useless babble. Keep the ideas and vids coming!

@snupmadra3787 4 года назад

It must be really cool for her to have fun like that with her dad! Hopefully those positive memories will last a lifetime!

@rjsway78 4 года назад

The best Power Wheels battery conversion/upgrade video!!! After watching I’m excited to convert my son’s battery in his truck. I just hope I do everything right.

@havocware 4 года назад

Excellent! Hit me up if you have any questions! Cheers!

@GregsWorkshopOregon 3 месяца назад

I dig it. My son's Jeep needed a new battery, ordered all the parts today. Everything except the low voltage cutoff will be here tomorrow!

@mdhanski 4 года назад

This is awesome! I finally got all my parts in this week and was able to get it built today. I appreciate the tip to add the voltage shutoff to save the battery. I installed just one M18 5.0 and am amazed how long it ran.

@havocware 4 года назад

Enjoy!

@Ephry73 4 года назад

Doing the same thing soon for my kid’s Kid Trax. Following the build but will initially use only one 18v battery as the motor is only 6v

@christoferlanderos8841 4 года назад

I just got all my parts in to do this. How did you adjust the voltage shutoff to 16.5v?

@jeffwisecarver 4 года назад

@@christoferlanderos8841 You have to hold down the button for a couple seconds to be able to adjust the cutoff and the restart voltage..

@c.a.l.e.b.s 3 года назад

I set the left controller button to 16.5. the right controller button goes to a Max of 10 and that's the one that I set to 1. I've triple checked all the wiring I'm using the exact same parts he used but I'm getting no juice to the wheels. The speed controller switch is set furthest away from the controller. I'm at a loss was hoping you might remember your install and have any tips for where I might go from here

@iwishyouwould6937 4 года назад

And LMFAO, was about to say it had no load on it. Lol, can not make everyone happy. Always going to be someone smarter and they not only want you to be wrong but them to be right. I just love that your spending time with your daughter and actively showing her that any problem has a solution. With dedication and hard work any thing is possible. Stay safe brother.

@KenpachiZarakiX 4 года назад

I actually finally have all the materials to do this. I have 2 18v 3.0 milwaukee batteries ready to rickey bobby my kid's power wheels this weekend.

@jorgepizarro3327 4 года назад

Me too I'm going to do my niece's four-wheeler 🤣

@martinfilion9140 3 года назад

Thanks for the solid info! My daytime job is teaching and I can tell you know how to explain stuff so people without much electronical knowledge, like me, understand. Also, tell your daughter she plays her part just as well!

@jDORK707 Год назад

Your vids are great. I know you haven't posted in a long time but hope to see more. these 2 really helped me and your presentation is great.

@onearmedsharkalligatorman 4 года назад

I did this hack last month. I was surprised the single 4.0 battery lasted about one hour, or maybe it just felt like an hour. That was with 2 kids, maybe about 90ish pounds total and they were using their Silverado truck to haul paving stones for me :) Controller was set around 50% I think. It was still definitely faster than the stock battery. I did not know about the low voltage protection cutoff for the battery so I ordered one the monitors you linked and also I liked the dock you linked better than the adapter I used so ordered one of those too, thanks for this video!

@frank3283 4 года назад

That's amazing how long they lasted...the batteries AND your daughter. She was a trooper.

@wccrispy 4 года назад

Man, she's a trooper for doing that endurance test!

@jakebrickley6819 3 года назад

I’ve fallen victim to over-draining batteries as well. Lesson learned. Amazon has a different model for $25 and I’m installing it this weekend. Thanks for the video!

@matteckelkamp Год назад

Which low volt cut off did you end up using?

@andyvansloun1152 9 месяцев назад

Also interested

@criznitty 4 года назад

Great narration, instructions, layout and video quality. The information and the testing is the missing info I needed to finish my project! Thank you!

@regthebackyardjackofalltrades 2 года назад

I just watched this and when I get a chance I’ll retrofit my granddaughter’s Jeep but she’s only 3 so, I’ll wait several more years. In 1714 John Harrison invented the H2 Clock and it exponentially changed our world. You and the other engineers that have preformed this retrofit are in his league. Tinkering with stuff like this keeps us Dads and Gramps young. Thanks. I’ll definitely wait till she understands how to use the controls and I believe the retrofit will be too powerful for the remote. Your video and others I noticed that the tires are well seasoned and have advanced inner wear. This is very informative to tell me that you all have also waited several years before popping the hood open. Thanks

@davidmeidel4455 4 года назад

thank you so much for teaching me how to do this my daughter loves her power wheels and the thing dies so quick I'm going to work on this project over the weekend

@natem2367 4 года назад

Dude needs to do more videos. I only see 3 videos on his channel which is pretty impressive for 3.77k subscribers.

@havocware 4 года назад

More to come!

@domfahey 3 года назад

I just completed this upgrade and my twin 4 year old boys love it - especially the "Don't tell Mom setting". Thanks!

@davidgreenfield1476 4 года назад

Love your work! Great job! Clean install. Would love to see a runtime down to 13.5 volts so we can gauge the risk vs benefits.

@bradley3549 2 года назад

Great idea!

@05hdmike 9 месяцев назад

as a grandfather, i loved the out takes....lol.... so cute....lol

@lamota0622 4 года назад

Just found part 2 great vid, will do this to my daughter 90s Vet

@jgoody7467 4 года назад

Bro, what are you doing, make more vids. I could see you and this channel taking off. You are clearly an AVE fan, good job.

@havocware 4 года назад

Thanks J Goody! More in the works... Cheers!

@diytacoma5758 9 месяцев назад

Agree

@nilknoc101 Год назад

Wholesome. Thanks for the breakdown! I’ll have to pick up one of those low voltage cutoffs for my build

@charlesrg 2 года назад

I did the same setup but without the speed controller since the kids would never go back to 12V once they try 20V. However the cutoff board relay is made for 20A and this cars go over 30A when you press the gas. I recommend using a bigger relay.

@jamesm8360 2 года назад

Low voltage cutoff board, other channels recommend a 24 volt relay in the wiring to prevent the burning up of that low voltage board. As others stated that they went through a few boards. Has anyone done this or had any problems with this low voltage board, thanks. Dad Hacks channel gives you credit for the build with the addition of the 24 volt relay to protect the low voltage board.

@DFWTX15 2 года назад

I’ve seen other guys add relays to this set up. Are relays needed?!? I appreciate the videos and the electrical drawings. Has been a big help!

@jarodpratt2129 4 года назад

Awesome. Thanks for the info. The voltage drop limit is exactly what I was concerned about. The batteries are expensive and I'll still need them for my tools. But now I can justify picking up a few more for my tools. I'm thinking a flexvolt battery.

@havocware 4 года назад

Glad I could help! Cheers!

@allmtrwhor3 4 года назад

Awesome video. Also very cool as a father to do a project you and your daughter can enjoy. Make more how to/DIY videos. These are great to watch and learn.

@benlyons7752 4 года назад

Fantastic. I had already purchased the speed controller and had wondered about the lithium ions being over discharged. Glad you made this video!

@bgtmbball 3 года назад

I just did this modification to my kids peg Perego gator and it worked really well. I am very new to anything electric and the video made it very easy. It was definitely way faster, way more powerful and the battery lasted very long. My question is do both batteries run down at the same time or does one run down and when that one is dead the other one runs down? Thanks to havocware for making this video and future thanks to anyone who can answer my question.

@bostonrugburn 4 года назад

Outstanding how to video. Nice work.

@havocware 4 года назад

Thanks Jon-Michael! Cheers!

@Cougar139tweak Год назад

Much thanks, assumed it would be more then just hooking the adapter up, much thanks, saved me money for sure

@brianpatrusevich2144 3 месяца назад

And thanks for the knowledge of the video, I had no idea about the voltage issues u spoke about, I have a barbie jeep with the 1st gears removed and 2 18volt 9ah batteries and I also took the Escalade tires that are like triple the size of the jeep so it looks so damnn cool lifted and extra wide, and I wrapped the tires all 4 with mountain bike tires with huge knobbys, I'm 210lbs and the jeep roosts the grass up in my yard and also flips me str8 backwards not even just a wheelie it completely flips backwards, then the Escalade I took a hoover board battery out and use that 😂 my kids love it, but removing 1st gear ⛮ makes the top speed over 25 miles per hr but u have to be careful because it takes like 40ft to stop so you have to be in a open field

@AustinLester 11 месяцев назад

This is so helpful! My kids thank you in advance and I feel much better about using my Makita batteries now!

@kirbycollins3223 4 года назад

You Guys Make the Beat Power Wheel Upgrade Videos!🥰👍

@ioliphant 4 года назад

Excellent videos now Patent it and let’s just get Milwaukee to make a Milwaukee Jeep , I would buy one for my kids 🤣

@familyofthenorth7593 4 года назад

I found a mustang Barbie on the side of the road. Upgraded with one battery. Crazy awesome. Went online and bought all the rest wait! Great job. You need to do more videos!

@benlyons7752 3 года назад

Thank you for this info. Just finished tonight with a pair of ridgid lithium ions. Great idea with the discharge circuit. It works great!

@almaruizdiaz7865 4 года назад

Watched the first vid, then this one came up, yup, you just got a new sub. Thanks!

@havocware 4 года назад

Hey Thanks! Cheers!

@SilverCSRT4 4 года назад

Thank you for this awesome video explaining everything in detail.

@silverbackgrizzly2402 4 года назад

Awesome.. science/tech/experimenting..I have four daughters and they love everything about learning. You did an awesome job

@havocware 4 года назад

Thanks Grizz! Cheers!

@AFTD. 3 года назад

Saving this video to modify power wheels for my nieces and future kids!!! 👍🏼👍🏼

@toddbrick 4 года назад

Thank you for this video! I copied your parts list and brought back an atv and my son loves it!

@havocware 4 года назад

Excellent Todd! Cheers!!

@teenice894 3 месяца назад

We get about 30 minutes with a milwaukee m18 5ah battery when riding on uneven grass but we keep spare batteries in the trunk 😂. We never run out of juice 😊. Gonna grab a 12ah when they're on sale

@hanzo0252 2 года назад

Been looking for just this info - or close. Thanks, and nice keep!

@albertoelizalde8 Год назад

😂 Love all the potential criticism that would be made by Sabis, Great job on the full video explanation.

@glennda5id Год назад

Great video. If you are not already invested in batteries, Ridgid and Ryobi batteries have built in cutoff protection making it easier to adapt them to the vehicle I run a pair of Ridgid 4aH at full chooch and get great runtime. I also have a setup with a 12v 12aH + 6V 12aH SLA batteries. Takes longer to charge, but much cheaper cells. I should compare runtime on the 12aH SLA vs the 8aH Li-ion Ridgid packs.

@EVLS10 4 года назад

Only things I'd add are: 1. Either a voltage monitor on the dash or low voltage indicator so you can get the power wheel back to the charger station to swap batteries before it dies. 2. Diodes. Any battery system that uses multiple self contained batteries needs current flow control otherwise only replacing one dead battery will result in hurting both the fully charged and dead as they try to equalize as fast as their internal resistance allows.

@lazydeadpoet 4 года назад

Any links to what diodes you would use would be awesome.

@EVLS10 4 года назад

@@lazydeadpoet Really the type/style doesn't matter too much in this case. Most important spec is continuous current rating at your highest ambient and lowest voltage. Even then go bigger than you need for a safety margin. Then you want to minimize forward voltage drop to give the motor as much voltage as you can. Other than that just pick the cheapest option. Mouser or Digikey make it easy to filter down your results to find your perfect one. Or you can get lucky on amazon finding one that works for even cheaper.

@MrALEG213 4 года назад

What gaugw wire you using to connect everything together? Please get back to me asap as Im looking at buying all the materials for my power wheels conversion. Cheers

@cThornton00 2 месяца назад

Nice video! Are all wires 12AWG? Does it really matter? I’m about to copy this build

@caliking369 9 месяцев назад

Amazing video really appreciate this. I installed a m18 on my sons lightning McQueen directly onto a speed controller without the low voltage cut off and now will be adding the module. Luckily my batteries are safe 😅

@caliking369 9 месяцев назад

Also just added almost everything on your list of supplies, except for battery. Hopefully you do get that small commission

@1Ohad0262 10 месяцев назад

Hi! Great video! I was allways concerned about connecting two batteries in parallel due to mutual chargings, but I see that you have done it without any hasitation. Have you noticed any issue with such parrallel connection later on ? Thank!

@Desert515 4 года назад

Awesome DIY I had wondered if in your first vid the cut out was on the batteries or the tool now I know I will be doing this to my sons power wheels Jeep when it give up the ghost

@RobinKerkhoven 4 года назад

Thanks for this video, I was able to upgrade my kids car to 18V safely. I had to use a 2 channel relay optocoupler since her car has led lights and a music player with a display that works on 12V. I had Ryoby battery packs but it's basically the same thing. Great Video!!!

@havocware 4 года назад

Hey Robin. That’s awesome! Glad someone was able to get one of the newer vehicles with lighting and sound dialed in with this mod! Cheers!

@alexanderbiryukov6736 4 года назад

Hello! I was looking for any information how to save lights and sounds on newer vehicles and get the upgrade done but found nothing. Can you please share any tips on how you did it?

@MisterAether 2 года назад

I did it tonight, one of those purple kidtrax convertibles. Radio, headlights, fake engine startup. All seemed like it worked perfectly fine. Everything did get brighter with the voltage being turned up, but that's something for tomorrow me to give a shit about.

@hungrycolby 4 года назад

Thank you for sharing, awesome video, explanation, and project! I'm going to do this conversion with some Harbor Freight Bauer batteries and I was wondering what gauge of wire you used.

@zer-kz8mb 3 года назад

Just bought my daughter a 12v Mercedes AMG that has 4 motors (one for each wheel) from bigtoys green country. Definitely going to do this instead of buying a secondary battery.

@signintoconfirm5175 4 года назад

Hello, I'm new to wiring. What AWG are you using throughout this project? I believe the PW wires are 12 AWG. Molex connectors accommodate 14-20 AWG. Terminal block is 14-22 AWG. Ferules are 7-28 AWG. Help is appreciated.

@gamertg9747 3 года назад

Ok stupid question…. Do you have a website or Reddit or anything that says step by step how to install all the stuff u put in the power wheels? Awesome video!!

@azfires000 3 года назад

I used your links to order them, but how did you set up the Low Voltage Battery Cutoff Module? there are other videos out there but man, yours it's to the detail!!!

@Chuckles4200 4 года назад

Aww man such a cool dad.

@MikeKow80 4 года назад

Don't think my kid has ever driven his car that long anyway, but I'll add one to my build this weekend.

@lukel3216 4 года назад

How did you set the controller voltage? Great build btw 😎😎

@NateD77 4 года назад

Excellent work and well done video. Up there in quality with TOT. Keep it up and you will go far.

@thermal_el_jackson 2 года назад

What a cool video. Just excellent on all accounts. Bravo to your small test driving star.

@TheKeenMechanic 4 года назад

Very cool. Thanks

@tomwoolley5779 4 года назад

Awesome video. Thanks for sharing. Can’t wait to do this to my kid’s cars!

@Diy-For-Life 2 года назад

Awsome video. Curious what the amp draw is under a heavy load. Such as off road up hill? Want to make sure i build everything to handle load. I assume based on your build its under 10a?

@angelaguilera2094 3 года назад

Hey nice upgrade and clean work...Would upgradeing to this battery affect anything if my ride on has remote control and led screen on it and lights ..?

@TheDutchman1980 4 года назад

Dammit lol I almost purchased the voltage cutoff module when I got everything else. Should have just got it. Thanks for the video.

@samallen6939 4 года назад

To the 5 people who dislike this video. I can not imagine how sad you are.

@TheReaL35 4 года назад

make that 8 sad sad people

@jorgepizarro3327 4 года назад

Make that 10 sad people 😂🥴

@anotherone9460 4 года назад

Imagine a 6v powerwheels battery...

@natem2367 4 года назад

Maybe they didnt like his hat or something. Get over it people, the guy likes to his swag.

@biggentallen 3 года назад

To the person who cares who dislikes this video, you must be incredibly sad.

@samallen6939 4 года назад

Inspiring video!!! Will be doing this in the near future.

@joshorourke 29 дней назад

Any issues with the wheel motors burning up? Did you upgrade those as well? TIA

@Ridabig 3 года назад

Awesome. Doing this with my Ego 56v batteries. Don’t think I’ll be able to go much more than 24v on the speed controller or I’ll blow the little motors.

@samkassem6308 3 года назад

Excellent tips, let me help some more: 1. The low voltage cutoff module here will drain the battery on its own. You must install a switch at the power supply. 2. The video assumes the power wheel voltage rating is the same as the battery. In most cases, that is not true, therefore the need for a dc to dc convertor regulator. If you need a regulator, most of them comes with a low voltage protection, and you may not need the low voltage cutoff discussed in point #1. Hopefully this helps

@bradley3549 2 года назад

No powerwheels are designed for 18-20v, but they all seem to handle it just fine. Trying to step down 18v to 12v is pointless and at these currents would be expensive both monetarily and in efficiency lost.

@kevingalloway8065 4 года назад

Great video! Diggin the Ton Up decals...I have an 01 Triple and 10 Rocket. Thank you from the NW burbs

@havocware 4 года назад

Hey Kevin! Thanks for watching - and thanks for your FD service! Be careful out there... See you at Motoblot?...

@kevingalloway8065 4 года назад

@@havocware I just ordered a voltage cutoff module...I see below you describe how to set the values. What is the threshold value and what does it do? What should I set it to if I set the voltage cutoff at 16.5V like you did? Thanks

@havocware 4 года назад

Hey Kevin. The threshold value acts as a buffer between when the the cutoff module kills the power (the voltage setpoint) and when it comes back on. For example - I set it to 16.5 volts, with a 1 volt threshold value: the module will open the relay (stop power flow) when the voltage reaches 16.5 volts, and won't re-energize the relay (enable power flow) until it reaches 17.5 volts (16.5+1). It acts as a pseudo hysteresis function, and stops the module from starting/stopping/starting when the module kicks in, and the voltage increases due to lack of a load. Make sense?

@kevingalloway8065 4 года назад

@@havocware Sorry to bother you again, but I have a question regarding the voltage cutoff module...I got a great deal on an 18v 12ah Milwaukee battery and when my sons get in to go, the module clicks and shuts down and the led goes out momentarily and then comes back on. After a few tries, the Jeep will eventually go, but it's very sporadic and the little black box on the module gets pretty hot. Any ideas?? Thanks

@havocware 4 года назад

Hey there Kevin. The black box on the module is the relay - if it's getting too hot, it's most likely because your vehicle is drawing too much amperage. If you have the same voltage cutoff as I used, the relay on the board is rated for 20A, if your vehicle draws more than that with the higher voltage battery, it might eventually burn out. Do you have any fuses or a speed controller on the circuit? The fuses will protect the relay, and the controller will help you dial in the speed to a safe zone for that cutoff relay. Can you post a video of your setup / wiring so I can take a look?

@TheGreasemonkey76 4 года назад

Great video! Awesome content! I really hope to see more videos

@havocware 4 года назад

Hey thanks! I’m working on it! Cheers!

@dnevill 3 года назад

Have you seen any of these power wheels blowing out the battery monitor? I saw someone that blew one, and i'm wondering if running on a standard 12v Power Wheels chassis with 18-20v could pull enough juice to blow the monitor out? The Amazon ones I've seen are rated at 20a. Just looking for your thoughts :)

@vegasheat71 4 года назад

Nice job I'm wondering what other things you can apply this to. Electric skate board, bike?

@jorgepizarro3327 4 года назад

I'm working on one now 🤣

@TheRealCardz 4 года назад

Any ideas for a good sound system for a power wheels? This battery install is next for my daughters power wheels. Except I’ll be rocking Dewalt. How we from the punk rock and hardcore scene always break the rules! Good dad you are! Sound system gonna bring me back up One thing that I can depend on Sound system gonna bring me back up One thing that I can depend on

@DANT98 4 года назад

Love it! Thanks for doing this.

@ColoMtns1 4 года назад

Did you add a power switch? Won’t the low voltage protector continue to draw power even after it has stopped delivering powers? Or do you just remove the batteries after every time it’s used? Thanks and awesome video!

@ryoka8321 4 года назад

I am wondering the same thing? I had a low voltage cutout circuit like you used on mine but forgot to unplug the batteries after a session and the cutout board drained it down to 5v.

@brianb5779 4 года назад

I never caught what size fuses you used?? Sorry if i missed it but i went back to 1st video many times

@jamesfair9751 4 года назад

You can cut that charge time down to 45 minutes with a fast charger also now try the 12.0 HD battery

@jamesfair9751 4 года назад

Derek Claycomb fast charge not only heats the cells up a lot more but by charging faster it doesn’t allow the cells to absorb their full potential yet they will register 100.% which will be one of its limited life time charges. (Take a battery charged in fast charge and when it’s full put it directly on a slow charger and watch as it starts charging more) Charging to 80.% is the ideal spot for optimal lifespan but it also decreases run time by a lot. 100% charge is less damaging to the cells than fast charging them is.

@mcflied 4 года назад

You use really good connectors. Any recommendations on a kit you recommend that has all the ones you have used? Looking for solid connectors that are easy and last. Great videos. Ordering the parts now. Daughter's Dune Racer stopped going in reverse and only went forward slow. Discovered it was a faulty gear shifter switch tonight!

@havocware 4 года назад

Hey there, thanks for watching. Good wiring is key to a solid installation, and less headache later. For wire ferrules (straight pin terminals), this is a pretty decent kit with crimper: amzn.to/3at3ofd. For ring and spade terminals, this kit would work pretty well: amzn.to/2yuK8kb Cheers!

@Interst8man 4 года назад

What gauge wire did you use?

@kcpth 4 года назад

Awesome video...your daughter is adorable. Great build

@havocware 4 года назад

Thanks! Cheers!

@zagaberoo 4 года назад

Great stuff. Keep warm, y'all!

@moesdiy2618 4 года назад

Thanks for the great video! I noticed that the molex connectors that you recommend are 14-20 AWG. Will those work with the 12 AWG wire that comes on the cradle?

@havocware 4 года назад

Hey Moe. I didn’t have any issue with the molex pins and the 12g wire. It’s a tight squeeze, but nothing it wouldn’t but into. Cheers!

@MACK3RW 2 года назад

"hey dear, yeah uh drive around the warehouse for 3 hours" lol

@johnsbarn1033 4 года назад

Like the KMFDM sticker on the car 🤘

@handcannon9814 4 года назад

very comprehensive test. tq!

@andresmorales9649 4 года назад

Thank u I just this this exact same 2 my daughters daughter's power wheel with ure help can u please put video on how to ad lights

@oscarbustos6634 2 года назад

Great video! Thank you. What gauge wires are you using for the voltage protector?

@danielalgara5680 3 года назад

What's the name of the clear wire connectors that you been using on this video? By the way great video and great detail work! Go Cubs!

@danielalgara5680 3 года назад

OHH i just notice that you add a link with the products that you use. Thats Awesome!

@michaelmarino6904 3 года назад

I appreciate the detail. I did the same mod to my kid's Power Wheels and thought the low voltage cutoff module would allow me to safely keep the battery in the vehicle overnight...wrong. It must still draw some current even after it cuts off at 16.5 volts. It ended up killing a $90 battery. Do you remove the battery after each use?

@MorganWalser 3 года назад

Awesome videos man, thank you for making them so informative. Ordering the parts for my kids now, though I'll be using my garbage Ryobi, because that's what I have.