PPK Post-Processing Kinematic - Emlid Studio Tutorial

Подписаться 71 тыс.

Просмотров 57 тыс.

50% 1

Check Emlid Reach receivers - store.emlid.com/rami
Today, we will go over the process of obtaining single solution GNSS observations, and using the RAW Logging data on the GPS Base and Rover, we can run a PPK solution using post processing software, like Emlid Studio.
Join The Survey School - thesurveyschool.com/
Chapters:
0:00 Intro
0:09 What is PPK
3:22 Setting up the GNSS Receivers
7:38 Collecting Single Solution Data
9:24 Exporting Data
10:38 Post-Processing Data with Emlid Studio
13:55 Coordinate Corrections
Emlid Studio: Free PPK software - docs.emlid.com/emlid-studio/?...
Join me on Social Media:
🖥️ Website: www.tamimi.biz
👤 Facebook: / tamimibiz
👥 Private Facebook Group: / iamasurveyor
👕 Survey Shirts - www.SurveyShirts.com
📸 Instagram: / ramitamimi
👔 LinkedIn: / ramitamimi
✉️ Email: rami@tamimi.biz
About Professor Rami Tamimi:
Rami Tamimi is an American doctorate student at The Ohio State University working towards his Doctor of Philosophy in Geodetic Engineering. With over 8 years of experience in the Land Development Industry, his experience revolves around traditional field surveying, civil design work using AutoCAD Civil 3D, and geospatial technology including LiDAR, SONOR, and Photogrammetric data acquisition and processing with the use of Unmanned Aircraft Systems or Drones. He is also a University Professor and creates instructional video content on RU-vid.
#GNSS #PPK #EmlidStudio

Наука

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 160

@islandsurveyor 2 года назад

Super explanation. I've been searching for a video tutorial using Emlid Studio for months now and this is the best I've seen. Thanks much

@user-lz9gz8tv6c Год назад

Rami, thanks so much for putting this tutorial together. It was extremely helpful in getting my Emlid data post processed. Cheers!

@andrewhotchkiss3466 2 года назад

These videos are great, thank you for making them. Looking forward to the OPUS one because all these "known points" for base stations need to come from somewhere!

@benturner4998 Год назад

Thank you much, Using PPK really helps because the NSRS points i have access to are out in the meddle of nowhere and people have had their bases get stolen. The secure locations typically have their LOS obstructed to where i need the rover to be. This will help a great deal, its so handy to have someone step though it for a sanity check.

@mshafeeqr786 Год назад

Thank you Rami, keep posting useful videos

@canduenvironmental 2 года назад

Rami, you ROCK! Thank you!!!

@MapScience 2 года назад

Thanks for the great explanation. I dunno why, but it just feels good to watch someone I don't know use the same workflow. Anyway, I've been using a pair of RS2s for about 2 years and am, like you, impressed by their performance. Subscribed!

@chriskenobi Год назад

hola, que pasa si no tienes un punto conocido?

@nonamoatafa308 2 года назад

Great job Rami 👍

@olorunfemiomonigbehin389 Год назад

I find this video very helpful. Thank you for putting this out.

@zinedine9939 2 года назад

تحياتي أخي تميمي من أرض المليون و نصف المليون شهيد..بالتوفيق إن شاء الله

@azmikew 2 года назад

Good explanation. I grew up a few miles from your location

@kadry93 2 года назад

Godspeed Rami great video!

@davidmclaren9653 2 года назад

Best PPK tutorial on RU-vid

@RamiTamimi 2 года назад

Thanks David!!!

@paateh8072 2 года назад

Thank you, well presented , very informative.

@xavriba 2 года назад

Very helpful! You are a star!

@itsreallytom4310 6 месяцев назад

Finally an explanation that makes sense

@miguelprabowodossantos5246 2 года назад

nice video my friend im from timor leste..........last time i do comparison elevation between autolevel and emlid rs+ and we have nice result tooo.

@Momanny247 2 года назад

I love your programme. Thank you bro

@ecosuman 2 года назад

Great video Prof. Rami..

@RamiTamimi 2 года назад

Much appreciated

@jaimebrown6521 2 года назад

Great video. Thanks

@miguelvarela7935 2 года назад

Hi Rami, thanks for taking the time to do this video, it saved me hours of trial and error. 1 question I have from your video: I do surveys in very remote areas in Africa where I have no known point for my base coordinates and no internet. How would you aproach this? should I just do a Point Averaging and use those coordinates for the base? Or not bother to fill in the base coordinates? Thanks a lot, love your channel

@Chief.Surveyor.AliQassim 2 года назад

thank you so much... very informative & understood very well... thank you

@abdishukriabdullahi8945 5 месяцев назад

absolutely i like your lessons from Somalia

@jianqiaocheng1644 2 года назад

Great videa Rami, Thank you very much for your work, thumb up from Chian LoL

@jianqiaocheng1644 2 года назад

China

@screenshotvibes3883 2 года назад

This was great

@dadb97 Год назад

Great video Rami. It would be great if you could explain in a video the whole PPK workflow with the new Mavic 3E. Thanks you

@bogalindah 2 года назад

Very informative...thank you for sharing

@RamiTamimi 2 года назад

Glad it was helpful!

@wouterviljoen402 2 года назад

Excellent!

@leonardgleicher 2 года назад

Thank you very much!

@monatamimi8125 2 года назад

Waiting 👍

@paulharty3068 Год назад

Thanks man

@sultanmahmud2932 Год назад

Good job.

@kimbarber3094 2 года назад

Rami, I’m just starting out in drone mapping and I really enjoy your videos. I have much to learn, especially with using GNS devices. I would be grateful foar an answer to a question. When using ground control points what is the process when you don’t have a known point? Thanks!

@abdulmuhaiminabdulfatah4252 2 года назад

Waiting..👍

@premiumyt8625 3 месяца назад

Genial saludos cordiales desde Patagonia Chile

@ammarelgazzar8782 2 года назад

Waiting..✨

@TONY...GTB6 4 месяца назад

thanks for the tutorial! I did exactly what you did with one exception. apparently one of my settings was different because I ended up with decimal degrees in my corrected file instead of lat/long. For some unknown reason that wont work in the software I'm using but Lat/long/and ellipsoidal in meters does

@marcusgilmore4311 2 года назад

Heck ya dude😎

@troymifsud1934 2 года назад

Thanks so much for the great content. So what if you don't have a known point? Does this work with relative coordinates?

@Met4nolo Год назад

That's interesting to watch but there's something to keep in mind: RTK measures are not a reference to check same PPK measures precision. Both types of measures are using the same calculations, the only difference is when it happens (Real Time or Post Process). In the end, you did not find an error, but just a difference between 2 same measures.

@hoshiarhassan6282 2 года назад

Hello from Iraq Great video

@RamiTamimi 2 года назад

Thank you

@Millsy.g 2 года назад

So my only comment on this is your setup of the base. You had it set to kinematic mode. Which is fine for the rover. But you will see greater accuracy on the base with it set to static. Since it's not moving, the corrections will be able to know for sure that the 'movement' it calculates is wrong, and can more easily filter it out.

@BillXT11 Месяц назад

Great video! Thanks for it. My questions: 1. Do you need to know the absolute position of the base station before hand (x, y and z) or you can place it anywhere? 2. Do you need to place the base station at the same position for subsequent measurements?

@lordorian825 Год назад

Great video! What if you don't have a known point for your base station?

@CarlosGarcia-bz2np Год назад

Hey Rami, thank you for the tutorial, it’s super helpful since I have a lot of trouble doing RTK while in the field, however I haven’t been able to average out any points when I process the data with the csv file, any chance you could help me with it? I don’t think it’s a conflict in times since both files should be within the same time frame

@delroybanman 2 года назад

Hey Rami, do you know if a CORS or a NTRIP connection are needed to operate the Emlid units for drone surveying? i live in a country that does not have access to these connections, but the company i am working with is interested in getting into drone surveying with the highest accuracy possible.

@SergioOlivas 2 года назад

There's something I still don't understand about PPK. When you captured the 3 points, you collected them for 10 seconds each. Are 10 seconds related to the proximity to the base? Is there a rule on how long I should manage each point depending on the distance between base and rover?

@ROBY-1988 Год назад

hello tamimi, great video!! I would like to know if it will be able to connect the emlid base and rover with the carlson survpc software. Will he be able to try the emlid caster connection as well? thanks and greetings from Italy

@ingedgarv 2 года назад

Hi Rami. And if you have to stake put the points, whats thw procces? do you manully input a corrected coordinate from a previous point, put the base there and stake put other points with the rover?

@ingedgarv 2 года назад

why if u did not have the coordinates of the base? do u place it over the point, log raw data, post proceed, and then u cant correct de points collected by the rover?

@kostasgerapetritis8670 Год назад

Hi Rami, great video (best out there explaining the PPK). I only have one question. Can i use the ppk solution only having only a rover logging raw data? The corrections will be taken by buying the rinex file from the company i use for my cors. Thanks

@seantorcello3325 11 месяцев назад

Buy CORS corrections, to get a fixed position on your rover. Then start logging data that's already corrected not the other way around. You can reprocess your raw data with a high accuracy CORS for slightly better positioning but it's overkill.

@franciscoaguilera6151 2 года назад

Disculpe Dr.Rami debo entender es única opción partir de un punto conocido, ó posprocesado?

@PortraitArtPhoto123 2 года назад

Stupid question about emlid studio, is there any reason to set the base to static or kinematic when doing ppk or rtk? Obvious on the rover, but I've seen people set the base both ways.

@luiz231827 2 года назад

FROM MEXICO VERY GOOD VIDEO COULD YOU GIVE YOUR OPINION OF THE DJI L1 LIDAR SENSORS

@russell36222 2 года назад

Thank you for the post, this has been really helpful. I've been getting an issue with the post processing in emlid studio, however. It says that I only have 0.2% fixed solutions, and 90+% float from my rover. The points cannot be corrected using fix since there is not enough fixed points. do you know what may be causing that issue?

@PortraitArtPhoto123 2 года назад

Other than the obvious view of the sky, you can get very different results processing forwards, backwards and combined. I assume you did this forward, try backwards.

@paulthilagar8959 Год назад

Accuracy level

@randaseptian660 Год назад

Can I use this when the base and the rover are separated by about 2 km?

@Hesallwet Год назад

How accurate could I expect points to be, if I corrected float points? Sometimes I can't get a fix, and I was hoping that with PPK or PPP and float points, that I could at least ensure that my points were sub-meter, or maybe even sub-foot. Which is good enough for wetland flags........Thoughts?

@stinkyoldmonk8982 10 месяцев назад

How long should we wait at a point to take the measurement? I mean after pressing measure button, how long should be the measure interval?

@indaleciochavez251 3 месяца назад

Hey Rami, my corrected CSV is missing northing and easting. Is that normal. I did a manual entry on the point and gave it coordinates for my project that was in state plane.

@darenleeper1644 Год назад

What do you do if you don't know the base station coordinates? Say you set up base for first time and want to collect data with rover while base is cooking.

@petefantham8153 2 года назад

Looks like i'll be using this equipment in the next week or so. Is there a way to set up the base with no known coordinate (like Trimble's 'HERE' softkey positioning), then applying a site calibration using a BM to your job? TIA. Great video BTW.

@RamiTamimi 2 года назад

Yes there is. I always encourage people to use a known point since it will always give a more accurate correction, but there is an option to do it with no known coordinates.

@benturner4998 Год назад

@@RamiTamimi Do you have a vid where you show your RTCM settings for the other freqs? Edit, sorry I mean frequencies for the other systems (GLONASS, etc..). I havnt had coffee yet.

@itsjared 2 года назад

Hey Rami, great vid. I know how much a pain it is to shoot these yourself. Had a question about logging the Base, you showed to log the base as a kinematic solution b/c the rover is moving... I thought, you'd want the base in static and the rover itself in kinematic.

@RamiTamimi 2 года назад

Good question, this could be an entire lecture but I’ll try my best to explain it. Static observation only allows for a single receiver solution since we are logging data to achieve one position. Whereas kinematic observations are understood to be a dual receiver solution. Even through the base is stationary, it is known to be used for corrections, so we don’t need the additional utilities to have a static solution.

@fabianstevenne Год назад

@@RamiTamimi, so the set up of the base is always in kinematic whether we work in RTK or PPK, is that right?

@fabianstevenne Год назад

emlid explains on his’web site that the set up of the base is in kinematic in we work With the rs2+. I thought it was a mistake because with rs+ I usually put the base in static

@nambachhoang8757 2 года назад

Good

@RamiTamimi 2 года назад

Thanks

@paulvalen920 2 года назад

im from Indonesian, and i have a question, how about to be serveyor on your country? isn't hard or anything you can explain, thank you ❤️

@DavidLPitman 2 года назад

Between the RTK corrected #s and the PPK corrected #s, do we know for certain WHICH are more accurate? I'm a noob but am reading that PPK results are generally more precise than RTK when both are done correctly. Is this true? Thank you Professor!

@RamiTamimi 2 года назад

Generally speaking, PPK is considered to have a higher accuracy because we have full control of the corrections. Now that’s not to say that RTK isn’t accurate, if a shot is fixed and has lower standard deviations, then it can be accepted as a baseline measurement to compare other measurements to it, just like we did here in this video.

@ayamgoreng8641 2 года назад

Hi. Can you do a video on static observation. Thanks.

@engiimaan2203 2 года назад

Hi I am from somalia so I would like to ask you question about surveyor special in offic work The question that I have is What is the difference between Orginal Coordinates and rotated Coordinates(Axis points) and How much degree I can Rotated the Axis coordinates? Thankfully I hop to instruduce that answer thank you somuch for you Benefits Channel

@sccolbert 2 года назад

Why did you set the base station to kinematic instead of static?

@sw20matt 2 года назад

Do you need both a base and a rover? Or can you run just a rover?

@guillaumeberthier915 Год назад

Please, would you explain, why for the base, you set up the height two times ?

@keyable 9 месяцев назад

When logging ROVER data, should the rover be standing on the point of observation? You have taken 3 points and the rover continued to Log the data, how is that? I am bit confused :s anyboyd could clarify? THNX!

@Chriscam2you 2 года назад

How do you proceed with PPK process if you don’t have a known point over which to set the base? Does this mean you can only achieve cm level accuracy relative to the base but inaccurate relative to the actual ground? Or is there an easy way to create an accurate known point in the field to then set the base over?

@Chriscam2you 2 года назад

I think I've answered this question for myself, Precise Point Positioning (PPP). I'm speaking hypothetically here about working in a remote location with no network connection, and no known point over which to setup the base. How can you establish an accurate known point to set the base over so that you can then proceed with your PPK survey and achieve absolute rather than relative accuracy? This link docs.emlid.com/reach/quickstart/ppp-logging/ explains how to record logs for Precise Point Positioning (PPP) and download them from Reach for working with your data in the PPP service such as NrCan CSRS-PPP service: webapp.csrs-scrs.nrcan-rncan.gc.ca/geod/tools-outils/ppp.php To measure a PPP, you have to let the base log for several hours, at least 4, maybe as much as 24, but if there is no other 'known point' alternative and relative accuracy won't cut it, this is an option.

@jaimelopez2698 2 года назад

Hi Rami, thanks for your video. If I am understanding. We have two options to make PPK. The first, is when we place the base in a unknown point, in this case, we configured the base in STATIC and CORRECTION OUTPUT ON, and 5hz. The rover, we configured in KINEMATIC, and CORRECTION OUTPUT OFF, AND CORRECTION INPUT ON. Right now I have saw your video, I know a new way to PPK but WIHT A KNOWN BASE, only for compare with RTK. Is it correct?? I am a little confused in post process with Emlid Studio. When I make PPK with an unknown base, I post process as rover my base logs, and as base my cors logs (previously download), in static mode, and I obtain an unique point (my base) corrected. Finally, I go to Stop ang go and correct the others points. But, make sense process only my base in unknown point wiht my rover?? It is right?? Thanks. Regards from Panama.

@jaimelopez2698 2 года назад

Rami, the rover have update rate in 5 hz, and the base in 1 hz. It to ppk when my base is in a unknown point.

@Isaac-fv6tt 4 месяца назад

Do you need an Internet connection to use the Emild reviver with this PPk process/

@mariaeirinismirni4732 2 года назад

Thanks for this video and hello to all! Can somebody explain me how the base can correct the rover if they are not connected to each other?

@rocolaurel2933 2 года назад

Para saber si recibes correcciones lo puedes ver en la barra de estado del rover

@fernandoterrasas6920 2 года назад

Rami, what is the app that you are using on your cellphone???. Thanks for your answer. God Bless you.

@RamiTamimi 2 года назад

It is called Reachview 3

@aampudia8 3 месяца назад

Hello!! is there a way i could get the sample files??? I'm interested in the CSV format so i can use some other software, like SW Maps

@geozicht-droneprojecten Месяц назад

Great video! How would you deal with a situation in which you have no access to a 'known' point to set the base over, however? Assuming there's no NTRIP, internet nor a CORS network anywhere near. Obviously you could create a high absolute accuracy known point by logging and processing 12-24 hours worth of raw data. But this is obviously far from ideal nor practical during a project. Would you, for example, suggest to log the base location for a shorter period of time (1-2 hours) and therefore accept a reduced absolute accuracy instead (relative accuracy between base and rover should still be in the cm-range, correct)? Or would you for example input a 0,0,0 for the base's long/lat/height (or XYZ resp.) to create a local reference network for the rover instead. Assuming you'd set the base over the exact same point during future projects and provide with the same 0,0,0 base coordinates you'd expect to be able to create a relative accuracy between different data acquisition rounds in the order of a few centimeters too, right?

@chriskenobi Год назад

hola Rami, que pasa si no tienes un punto conocido?

@TONY...GTB6 5 месяцев назад

I have the Reach RS+ and I'm using the same Emlid Flow App but somehow the settings look different. I assume its because the GNSS receivers are different. Correct?

@keyable 5 месяцев назад

I have seen in some videos, where they say to stay at the same position for 15+ minutes, but you just stay like 30 second on each point, could you pls expalin it why is it so?

@keyable 5 месяцев назад

at 6:30 why havent u started Position and Base Correction recording? When is it useful?

@hehbokkharkongor7718 2 года назад

👍

@user-ic8rb8vi1i Год назад

Thank sir for your time and your lesson Please sir I have GNSS base station and I want to connect it with my drone Mavic 3e Please sir help me out

@kizzjd9578 2 года назад

Great video. Got a question for you.. I’m a drone data collection remote pilot, The company I work for wanted me to get a heap of random gcp over an area where we were doing lidar and photogrammetry. We used a topcon base and rover. My question is that topcon says to measure the length of one of the legs of the tripod to the base rather than the vertical height like you have. How would this work out it’s height? Over a known permanent survey marker? One leg could be sitting 1m underwater for all it knows. Have you seen this before?

@RamiTamimi 2 года назад

I honestly never heard of this. The instrument height is always the shortest point from the bottom of the device to the point it is occupying.

@kizzjd9578 2 года назад

@@RamiTamimi that was my thoughts as well. In the end they sent us the incorrect settings and didn’t have line of sight to the base so couldn’t collect any points.

@mjmcb1 2 года назад

If you measure the length of a tripod leg and then apply Pythagoras, you will get the height of the tripod baseplate, but not the required antenna height. I would never do that. I keep a 2-metre dressmaker's tape with me to measure the antenna height directly if I need to [the antenna plane is usually marked on most units]. For field work, I have a tripod for the base station and a telescopic monopod for the rover, and I have their heights permanently entered into their respective GPS units. I long ago gave up using a surveyor's bipod; they are much too unwieldy in field situations.

@kizzjd9578 2 года назад

@@mjmcb1 ok, seems like a hassle to use Pythagoras when i could’ve just plumbed a measurement down.

@mjmcb1 2 года назад

@@kizzjd9578 Sure is. It makes no sense to me. Either measure it directly with a tape or have the heights of base and rover permanently encoded in your GPS units.

@gauravmeshram7323 2 года назад

Hi Im from India, According to you which company gives better solutions in RTK Range whether its in deep forest or in crowded town :- 1)Trimble , 2)Pentax or 3) Laica ??

@seantorcello3325 11 месяцев назад

The one that has the most channels.

@raymondokyere4040 2 года назад

Is it possible to use the cors station in PPK with RS2?

@mjmcb1 2 года назад

Yes, provided it is not too far away. Less than 30 kilometres is best.

@christophenurse3637 5 месяцев назад

Im interested in knowing if the emlid has COGO tools

@tonybragano 18 дней назад

How does observation time come into play?

@MattnUska 2 года назад

🤟

@fernandochicuate9790 2 года назад

I HAVE A QUESTION, HERE IN MEXICO WE USE OUR BASE RINEX AND INEGI (OUR NATIONAL GEODETIC NETWORK) RINEX FOR THE POST-PROCESSING, WHIT THIS PROGRAM AM I NO LONGER NEED THE INEGI RINEX? JUST THE ROVER AND BASE?

@RamiTamimi 2 года назад

You will need the RINEX as this is the logging file that is going to sync the times data was being collecting by both the rover and the base

@fernandochicuate9790 2 года назад

@@RamiTamimi CAN IT BE IN SINGLE MODE? IF I PUT MY BASE IN A UNKNOW POINT, AND FOLLOWING THE STEPS OF THIS VIDEO, CAN I I DO THE POST-PROCESSING?

@RachelJacob-ic1fb Месяц назад

Where is the OPUS video you mention?

@paulharty3068 10 месяцев назад

Why compare rtk vs ppk, against each other and not a know point. Which one is more accurate? The results don't really show anything

@daar1259 2 года назад

Can i work in usa with technicien land surveyor diploma in algerian?

@RamiTamimi 2 года назад

You'll need a work visa. If you have one then yes, there are so many surveying jobs in America.

@sujankhanal12 2 года назад

Hello sir, Height of PPK is ellipsoid height or Geoid ? Please Describe plz

@RamiTamimi 2 года назад

Any GNSS regardless of solution captures vertical data in ellipsoid height

@phemelomogatusi8495 Год назад

What is Elipsoid height?

@maps_ingenieria 2 года назад

hola ingeniero Rami Tamimi, excelente video, acá en mi país mexico así es como realizamos el tipo de trabajo para la colocación de estaciones de control y líneas base, gracias por compartir sus conocimientos

@loganvsa23 2 года назад

Las dos antenas se ponen en modo Kinematic? Saludos

@maps_ingenieria 2 года назад

@@loganvsa23

@loganvsa23 2 года назад

@@maps_ingenieria en kinematic?

@nickalex636 2 года назад

I am looking to take measurements on a property without a known point or anywhere close to one i could use. Very remote property no cell signal. How would i go about getting a base station point.

@RamiTamimi 2 года назад

You would need to establish a static observation. Something I will cover in the future.

@mjmcb1 2 года назад

Rami has been showing a base station set up on a known benchmark. I work in remote Australia where there are no benchmarks, no CORS, no internet and no cell towers, so I set up the base station and let it run for 30 minutes or so, after which it has a SINGLE solution of better than 1 centimetre, which means the rover will show a FIX solution of similar accuracy. This also works for PPK. The RS2 is a multi-frequency unit and is much faster at this than the older Reach RS.

@nickalex636 2 года назад

@@mjmcb1 does it say what the accuracy is on the device? If you left it in one place for several hours this could yeild better accuracy? If i could get accuracy within 30cm that would be awesome.

@mjmcb1 2 года назад

@@nickalex636 I wouldn't consider 30 cm acceptable. My usual RTK FIX Accuracy is 0.5 centimetres. I recently wanted to demonstrate how RTK worked to someone who was having difficulty understanding it. I set up the base station and let it run for a minimum 20 minutes. On the rover I set up a survey, with a defined acceptable accuracy for surveyed points [0.5 cm, 1 cm, 2 cm, etc.], and the rover showed how long it will typically take to achieve that accuracy with RTK SINGLE, FLOAT, or FIX. The answer is usually 20 minutes, 10 minutes, or 30 seconds respectively. So, if you are willing to dwell on a point for 20 minutes with a single GPS rover, you can get centimetre accuracy. But only 30 seconds for an RTK FIX, using a pair of Emlid RS units. For surveying, as in most things, time is money.

@nickalex636 2 года назад

@@mjmcb1 makes sense especially if you have to take multiple points. Currently i am using garmin handheld but accuracy is not so great. Around 3 meters at best. Looking into options without spending 10 grand.

@user-ic8rb8vi1i Год назад

Please sir the base station name is chcnav