Pre Cut Tint Kit--Shrinking and Installing Back Window--Any Car or SUV 

thank you for the informative video. I had tint training but this still helped explain a bit more

I love your tint videos. I just did my wife's Lexus NX. I previously did our solara from watching your videos 6 months ago. You are the only person to FULLY explain, show, and give a proper how to on this. I'm really surprised more people haven't liked/watched it because this is the best for me. A++++!!!

Great video and appreciate the attention to detail! Thanks for helping to make my first window tinting rodeo a pretty decent success. The only commentary I have is regarding the 3rd brake light. Squeegeeing around it may work, but I'd encourage removal first, if possible. Typically they are just held in place with a couple of screws or clips.

Just tinted my 4th vehicle. I always come back to this page for a refresher. 4-5 out on my first one and no bubbles.

Great video! I love how detailed you are with your videos.

can't wait to try this for first time.

Excellent video - I see exactly what I did wrong to end up with creases when I tried it. That is a fairly flat rear window. My Ford Crown Vic rear window has much more curve.

I like how you demonstrate it. Very detailed. 👍

This was a great video, one of the best I've seen actually. Here's a question...what if you screw up after applying to the inside I.e. big hair, dirt or rip in film. How do you remove the film without breaking the rear de-mister lines?

The squeegees have a semi firm rubber edge. when using them, you need to spray the film with your soap and water solution so that the squeegee will move smoothly across the film without sticking. water on the outside of the film is ok at this point; you are just trying to force the water solution out from between the window and the film.

Those damn fingers at the end lol I tried tinting for the first time at home and those are my worst nightmare! I need to practice pre shrinking every window for now.

Great video - thanks for sharing! I plan on gathering the tools to attempt this next week. Question - what brand and/or website do you recommend to buy the pre-cut tint film?

If you heat the corners out first and work your way to the middle it heats a lot easier.

Very detailed instruction on how to... Why is there an necessary use of dryer bounce sheet? My guess- Is it because of acting in somewhat waxy property so that makes easier to remove the sheet off the window?

Thanks for the vid. If I ever see you at a bar, I will buy you a drink.

You can use a hair dryer, but it does take longer. before heat guns, professional tint installers used hair dryers.

a question. what mark film you use? 3M?suntek?lumar?

Are all tints capable of shrinking using heat gun to follow the curves of the glass, especially the rear ones? Or there are tints that does not shrink at all?

This was a 2017 Honda Accord Coupe EX-L. just bought it last week. needs some comment from ya guys. or advise. I know for sure the Dealer would do the same sweet talk just like my 2014 Honda Accord deal. i end up keeping the car for 3 years

Wow! Excellent video... Keep'um coming

Here are some kits on amazon that we would recommend purchasing. There is an option to buy the kit with the tools we use in the video, you just need to select the kit you want to the right of the picture. Make sure you send an email with your vehicle information and shade of tint, as these ads are not vehicle specific and that information will be needed to cut the correct patterns. for a 4 door truck: www.amazon.com/dp/B01D8S9ZKQ for a 4 door car: www.amazon.com/dp/B0162XEX5Q for a 2 door truck: www.amazon.com/dp/B015OMVNX6 for a 2 door car: www.amazon.com/dp/B015D0IOVI for a small/medium SUV: www.amazon.com/dp/B01EDAX7Y8

Great video! 👍🏽

Great job ima try this myself

Should you be heat shrinking for every single window on the car or just the rear window? Thankyou

Welp, I'm back again because I have a newish car (2016 ct200h). I've used your videos every time to tint my windows and your's are the only ones that go through everything in a clear and concise and in real time. I've shrunk the rear window film on other vehicles according to exactly what you have in this video and zero issues, however my new car has a rear windshield wiper... so I am unable to put the tint all the way on the back windshield due to that... Can the rear window tint be shrunk on the front windshield mainly because it's a nice big surface or will it not work right because it's technically not the rear windshield shape? I searched everywhere trying to find an answer and it doesn't appear to come up, so that's what makes me wonder why do you do in a case like this where physical access to the entire rear windshield is blocked by an item that can't be removed...etc.

Thanks for the video! One question though. the squeegees your using, do they have a rubber edge or just smooth plastic?? just wondering as in my mind rubber would be hard to slide across the film? thanks

Thanks for the video. I tried two separate times and end up failing. Keep getting fingers on the edge with the shrinking process. Thought I could go ahead and install but same thing happens inside the window during install. Any reason that I kept getting fingers and how to rid of them?

Hi, I have seen videos where they don't use a heat gun at all, is the heat gun completely necessary? Thanks in advance.

In another video, you used the wet solution to shrink the tint on the side window. Why the different in method? If you don't mind me asking?

Great video..!!!

I was told that you couldn't fit tints to heated Windows, is that correct? As your applying tint to what I assume is a heated rear window, thanks,

why do you only need the bounce pad on the rear window? what would happen if I you did the side windows in this same fashion (bounce pad + traditional h)? could you use the side swiper for all for skweegee work ( i dont have a 6" turbo)

What if you get a bubble or two in the center? Heat gun?

Awesome! Thanks. 🙏

But what’s the best heather gun to get rite now for this job they say anyone but u don’t want get nothing to powerful to mess up u r work and u r car

Where do you recommend getting precut tent from and the tint you prefer to with?

Can you use a regular hair blower instead of a heat gun?

Thanks for the videos. I’ve a roof spoiler in the way which obviously causing an issue when shrinking, any advice?

what do i do of I don't have a heat gun tho.? is there any good alternative

How do you heat the tent. Do you turn on the heat gun to a max or low power.

Do all pre cut kits need to be shrunk with heat gun?

Thank you.

I don’t have a heater gun so can I use a blow dry

Can u wet the outer tint while shrinking

Doing what you just did with the heat gun I have melts the tint in seconds. Also when shrinking, it creases even when it looks the way yours does with the squiggly fingers. How hot is the heat gun supposed to even be?

Can you sand yellow turbos with 1000 grit ???

Whats the solution in the bottle? Can i use a sented dry sheet?

on some cars i heat shrink it that is nothing up after i shrink it and i still get alot of fingers can you help me

Why using heat gun for.ihave been installing this thing just with soapy water and any id card

Ok even if the pro kit and cut or they removable tints or no

Good vid! 👌🏻

Took me 4 hours trying to install on a 1989 vette rear window....looks like crap!!! Had to try...called tint shops and when gave them the application they laughed....we don't do those!!!!

Change tha battery in the smoke detector! lol

i had tint install by Honda Dealer recently, its was so awful and ugly. specially the matrix dot area showing hazings and spots. i just got it only a week ago, brand new. now it was messed up. just like my 2014 Honda Accord, got the same problem, and i got to drive it for almost 3 years. what should i do?

I can't get my tint to shrink like that for shit.. ive tried like 7-8 times now.. seems the tint sticks to the glass idunno

Application starts at 13:00 Skip to see what you came to see

I have alot of stickers on my rear windshield will I have to take those off to shrink my tint on the outside the stickers are top left top right and 1 big one in the exact center of the window 🪟

Is that dark or light yellow turbo one is soft and the other is hard ???