Pre-Wash, Contact Wash, Decontamination, Clay. What I Use On A Daily Basis! The Best Of The Best!! 

Angelwax Stripped Ease is used if I believe there could be wax or sealants remaining before correction.

👍🏼Yes sir! For the record everything you dish out I study......... so please continue with all your kits, I have actually implemented most if not all you’ve shown us here. Thank you again Sensei Bryan🥋

Thanks for all the amazing content you bring to the channel , and for be a great human being .keep the good work and much bless for you.

Excellent video brother. Hardly do I ever watch an entire video without skipping but I watched every detail Very through, very informative.. I have been using CARPRO reset for awhile but I’m definitely looking into the kit! You did an amazing job

A video of all of your packages and kits would be awesome!! Great videos!!!

Great video, Brian! Thanks for your expertise.

Outstanding video! Wow! That is detail! Thank you for the information, I really appreciate your efforts and dedication.

I enjoy all your videos. Thanks for making so many of them. I'm sure working all day detailing cars then making videos has to keep you busy.

Beautiful work my friend. Perfection as always !!!

I'd love to see your kits or go to products when hitting hard, soft, and "normal" hardness clearcoat. The knowledge you have shared has been invaluable in my personal development with respect to both interior and exterior detailing!

hey brian can you please update this video with new chemicals and oldies your current set up your experience is so valuable for me

As soone as we get to "I'm Brian from apex Detail" it's 👍 time. 👏👏👏👏👏👏👏👏👏👏👏👏

Great vid! Please show us your soft clear correction kit for leading up to a wax or sealant application. Thanks!

Outstanding information and video work. Thank you, and yes the info on additional kits is something I would love to see. One question, what foam product is the best to use in the pre-wash that actually loosens' contaminants before contact washing?

Would love to see a follow up segment to this of what you're using now compared to the products featured in this video from 3 years ago.

I would like too see any and all kits you would want to show your knowledge is so much appreciated

I know this is old, but can you do a kit for soft clear? Subaru like? Thanks! Great videos thus far!

another great,informative video my great friend.i say show all the packages ,but that's me. i feel knowledge is power nothing wrong with being 2 INFORMED..cu on the next 1...

Geez..I`ve seen this one before ..wow that wet shine is awesome. I think maybe I was attending to whatever when viewed the first time.

Love your videos!! When you put on the iron remover do you do that when the car is dry or wet after a wash? It looked dry in the vid. Just want to make sure I’m using the product correctly. Thank you.

I would love to see any or all the kits you were describing there. A future playlist for people starting out and just looking to see a tried and tested starting point for where to invest their money for different jobs they plan to do.

Ha nice video, pretty cool Stinger to use for this video. I’m a shine supply fan myself, but CarPro has some great stuff

I’d like to see a comparison of what you use for hard clears vs soft clears

I been using the multiple mitt method ( one mitt per area ) than put in bucket ready for the washing machine. In fact mutliple wash mitts are cheaper than all the grit guards for the two bucket method. Some people even recommend 2 grit guards in a bucket. To me that means the grit guards don't work as advertised.

SUPER clean

Wow, that car looked sharp after you got done. Thx

Yes! More kits!

Great video. What brush did you use on the tight wheel wells?

Correction kits! Yes!

Please continue this for paint correction and protection

Brian another nice teaching video!!!

Sweet results

more kit videos! these are great!

Brian, very good video. Would love to see a kit/ package for American cars such as Mustang / Corvette / Camarillo with bold colors.

Killer content, Brian. This video should do well. Very good info within. I've been meaning to try Glide. Seems like a good value.

Brian, what is your process for drying a car? What do you use and how do you use it.

Beautiful color on that stinger.

Brilliant Brian and great to see others methods. I noted a few things I don't personally do: - The agitation with the bug splat remains is a big no no for me personally. You'll no doubt be inflicting some minor scratches/marring as bug remains can be pretty hard at times. I guess as you are correcting here it isn't a huge problem but I find allowing it to dwell 2 mins and rinsing with the PW is enough to remove the insect splat though and negates the scratching risk completely. - Your method for hand washing is an interesting one. I see your point with 0 dirt being deposited and recollected by your wash mitt into the rinse bucket but there is a problem introduced here. You will be picking a lot of dirt up going over 3-4 panels at a time with them and dragging that dirt across the paint work. At least with the 2BM if done properly you are removing most of that picked up dirt 1 panel at a time and not dragging it across several panels. I see the potential in your wash process though and actually think if you had a single mitt for each panel (roof/glass, bonnet, front bumper, wings, each door, rear wings, boot and rear bumper) roughly 13, could use some of the £1-2 chinese synthetic wash mitts it would present the perfect hand wash. I may consider this wash method in future for sure 👍 Please don't see this as having a go, only sharing my thoughts and not saying there is any right or wrong way. We all do things our own way, thanks for the video and keep them coming! 😊

Hello, Could you try Griots Surface Foam Cleaner and give your opinion about it? Griots is pushing it as a touch less wash. I tried it on a daily driver and was very impressed by it. 😲

Hi Brian, Where did you find those clear buckets? they look pretty cool.

Great video! What's the dilution ratio for the Iron X Snow Foam for the cannon? How many Oz to water?

Well done. Thank you.

#apexdetail I see a nice looking black bike in the background there. Do you do bikes and have you ever done a video about bike detailing? I get there are going to be similarities but as an avid rider I'm always looking for better ways to wash my Harley!

Hi Brian, What kit do you use on a 1 year old car that had a new car paint correction, a film bra, Opti-Coat Pro Plus coating and gets a hand wash every week, rinse, pre-wash, rinse, contact wash, rinse, dry and then on a monthly basis the Si02 topper was reapplied. Now the car is one year old and looks great and I want to do an annual decon and for that I wanted to know what kit you recommend. Thanks and I hope you are feeling better.

OK Thank's

Another awesome video! A very thorough process! A couple questions... - what is the pressure washer you’re using and what are your recommendations for one that won’t break the bank? - what did you use to dry at the end? I think I saw a forced air blower in the background? - how would you adjust this method if you didn’t have your shop and you were working outside in the sun?

Hi Brian, using carpro ech2o as rinseless wash before paint correction, is claybar enough to remove any protection the rinseless wash might add to the paint?

Brian I would like to see all your kits and especially the sealants.

Have you used the seafoam bugs b gone? That stuff is pretty amazing

In this entire process did you only use three wash mitts? I notice you used the green one a couple of times. I am thinking about switching to 3 wash mitt system. Thanks!

Who makes a better sealant Meguiars synthetic sealant 2.0 or Jescar Powerlock polymer Sealant?

CarPro doesn't ship Iron X to Hawaii due to FAA regulations - this was done recently apparently. Can you recommend a comparable alternative for chemical decontamination on a ceramic coated car?

I got a question How do you store your synthetic clay bar? I try to drive mine off thoroughly but it seems to stick to everything cardboard, plastic any tips for storing these things? Thanks as always

I know this is off subject but I value your advise over everyone what is the best boat compound and sealant thanks so much!

Are the Koreans using soft clear coat? And one more thing ... how are the body panels lining up? No gaps and misalignments? Thank you sir!

Great video. What do you use for one step polish on soft black paint?

Where did you get those clear buckets?!

Can you use "carpro reset" in a foam cannon? -> you dont need the bucket.

Great info and video! Can you put a interior kit.

where would i find a wheel well brush like that?

Hi Brian have you used Angelwax nemeses for tar removal Is it any good?

Have any of this products changed in your kit? Has been a full year

Could I add Iron X to my foam cannon and add PPVBW? Thanks.

Awesome content as usual...learning a lot from you Brian. Thanks so much. Noticed you had the greenworks pw going again with a smaller gun attached directly (wish I had known the greenworks didn't have the 15mm issue my SunJoe does...I can't adapt to the smaller gun without buying 6" worth of damn adapters/converters - so I gave up) What pw gun are you using..i'm curious? Oh, and I'd love to see your kits for one-steps as a beginner. thanks

Do you think iron x soap is as effective as iron remover

You should try out Adam’s polishes iron remover! They have sales all the time which brings a gallon down around $38 which is stellar for iron remover. It works great as well. Always looking to save money 😁

can you please re do this video 2020 edition ! :)

Do you dry the car in between steps? If so how do you dry it towels or a blower? You explain very well every process. Many thanks!!

Coating kits if you could do less expensive, mid range and top of the line packages would be awesome!

where did you get that bucket its beautiful

Can you do a series on paint prep sprays?

How much would a process like this cost?

I'm sure you've used iron x, I do, haven't tried gyeon.... can you tell a big difference between the 2? I'm going to order some and try it.

can you follow all these steps and simply go straight to a wax or even Opti seal for protection without having to machine polish ?

Brian it looks like the car pro iron x foam doesn’t remove iron like it claims to do. What is your opinion?

👍

A coating application kit please.

Is that a sponge you are using to remove the bug juice?

Why Gyeon iron over iron x? What do you treat windows with? GTechniq G1,G5, or View?

What do you think about Carpro ImmoLube?

Hi Brain , nice kit you are using. let me introduce my own kit (Chemical Guys CWS_110 Honeydew Snow Foam Car Wash Soap initial pre-wash, Sonax Fallout remover as iron remover , Chemical Guys or Mother Clay Lube spray or water and soap, normal clay bar by mothers, Bugs and tar remover by Rain-X or by Gunk[solvent type but safe and stronger than non solvent] , Meguiars NXT Generation Soap for final Wash, Chemical Guys Diablo Gel Wheel and rim cleaner) what do you think?

how does the triple x snow soap smell?

You use the carpro iron foam but not Iron X that's interesting. Is the gyeon iron that good or is it the price?

What kind of pressure washer are you using? It's sounds quite.

All the things like “let it sit for 10 minutes” is just so foreign to me lol I’ve never had a pleasure of working on a car indoors or even much shade, also I live in Florida and it’s always very hot things dry within 1 minute I can never let any product sit for more than 20 seconds

Where in the heck did you get that clear bucket!?!

Are you using a spray product when drying the vehicle or choosing to utilize air to minimize contact?

It appears that Raindrops Detailing Supply is not in business.

can the iron removal be done first before the wash?(not the iron X foam)

Lol we want you too Download your entire brain great info always B. TY

I've found that on my own cars, I don't have to use clay anymore when using Gyeon Tar remover and Bilt Hamber iron remover. I agitate the Gyeon tar a bit with a microfiber towel and Gyeon Tar is great that it works on a somewhat wet car also, a property that is not so common I think?

Tar or sap removal?

Dont over think the moment...

Good video 👍

Way dont you use iron x on the rest of the car, i normaly see a lot ferros partical there

Wrong wrong wrong from start to finish