Predator 224 build / Ghost Buster

Подписаться 85 тыс.

Просмотров 19 тыс.

50% 1

Predator 224 build / Ghost Buster
Built a Predator 224 with a DIY REV kit and some billet parts. Tested the 224 against the Predator Ghost
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: www.youtube.co...
Instagram - Doubledown555Black66
__________________________________________________________________
Parts used -
REV KIT - www.ebay.com/i...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so. The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@julestrdprodjimavicpro2869 2 месяца назад

I love my 212 built but LOVE my 224 none built for everyday usage! Your videos are A1 as they say in the Mini Bike Community!

@timbattle3415 3 месяца назад

I had the same issue with the thumb throttle. I got full sweep out of it by taking a Dremel with a carbide grinding bit to the inside of the thumb throttle body. There's casting that you can grind away on the inside.

@davidholcomb9961 3 месяца назад

I'd rather go with the 224 for the torque. There's no replacement for displacement. I guess the Wildcat 223 is the hot ticket because of the beefy block and the longest stroke in the class.

@NONAME-kw3pu 3 месяца назад

thx for telling us the jet size, carb size and altitude so ppl at similar altitudes and builds have a place to start on jet sizes instead of guessing.... with 10 main jets and 10 idle jets... that is 100 jet combos possible... that is a LOT OF trial and error and some of us ... might not have the patience to try all those combos. a must RE see vid series ;)

@Black66 3 месяца назад

Everyone's jetting will be different. I have even had two identical carbs on the same bike and the jetting turned out different from one another. Check out the carb tuning videos on the channel in the carb tuning playlist. Thanks for watching!

@AnGryCruizer Месяц назад

@@Black66u da man @black66

@denhamdaves 3 месяца назад

The governor hole up top can be used for Pressure release just put a little air filter on there

@Black66 3 месяца назад

Check out the playlist for many engine builds and part combos. Thanks for watching!

@mikesbarn1858 2 месяца назад

You need a one way valve on it.

@wes89 Месяц назад

@@mikesbarn1858A diode!

@milwaukeebrewcrew484 3 месяца назад

Dude this is awesome. Love the channel this is the go to channel for mini bikes. I absolutely love everything you do… your never to old to ride mini bikes! I’m 33 my father is 64 and we ride all through the city! Nothing better then riding wheelies on my bt200x down the road with my dad riding one beside me. The heads we turn while riding makes it all worth it.

@Black66 3 месяца назад

Thanks! That's what its all about for sure!

@morethenenough 3 месяца назад

Hey my friend told me about you. You went right by my house in this one Have fun

@donkler5476 3 месяца назад

First comment woohoo

@christophermichaels6569 3 месяца назад

Makes me excited. Id be building my 224 already but ombwarehouse forgot the 265 cam in my performance kit I got from them. I have some 1.3 arc billet rockers to go with it and I went all out and got the 24mm Mikuni flat slide carb too. So pumped to get working on it.

@marquislewis1767 9 дней назад

I have built a few engines by watching your vids! The information you provide is gold! I have a ghost with a broken rod. I would like to go to Harbor freight today and grab a 224. Would I be able to swap the 224 plastic cam gear for the metal cam gear out of the ghost? And could I use the rev limiting ignition coil from the ghost on the 224? Just so I can temporarily remove the governor from the 224 until i can order the superman kit.

@Black66 6 дней назад

Thanks! If you use the Ghost coil you also have to use the Ghost flywheel because its clocked different than a 224 flywheel. Both engines have .550 cam mains so it will fit. Check out the cam fitment video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6Q_ngCckaJI.html

@02ws64 3 месяца назад

Just picked up a predator 224 for my trailmaster mb200 and went to go install my 22lb springs and was shocked to find it has a hemi head from the factory....this is a newer motor I picked up after hf had been out of stock for a while. Here is a link to my video showing the head ru-vid.comEPpvOoJXFpk?feature=shared

@Deucealive75 18 дней назад

I'm wondering if guys know they can get a Ducar 224 from DynoCams? This is the one to get if you want to build. No governor or flywheel. Non hemi head. And I'm hearing better quality than the Predator 224.

@BT2SS 19 дней назад

Love your videos, but a torque wrench gets ONE click!!!

@Black66 19 дней назад

I like doing multiple clicks to get folks to comment on the videos! Thanks for commenting! Oh by the way after 400 + plus videos on the channel We haven't had one engine failure! We can thank the mini bike expert for that! He shows up from time to time on the channel. Also check out the other world-ending videos on the channel that we were absolutly not supposed to do, no Exhaust video, three foot intake video, and one of my favorites the 7- foot exhaust video! Thanks for watching!

@mktwatcher 26 дней назад

Just wasting fuel with jet in that 28mm carb. Try smaller jet in 28 for better fuel air mix.

@Black66 26 дней назад

Check out the playlist on the channel for many jetting and carb videos. Thanks for watching. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-D5L8LtsaN_g.html

@airamiscovarrubias2593 3 месяца назад

Hey black66 I’m trying to replicate your build on my 224 Coleman b200r do you mind sharing what kit you got from diy performance can’t find kit exact kit

@Black66 3 месяца назад

I Linked the REV kit in the description of the video . Thanks

@mazb2500 Месяц назад

Hello, I have the same combination. The only difference is that I have a billet piston and the intake and exhaust block cover is ported with a Nibbi carburetor. The rear toothing is 40. The maximum speed is 60 miles with a BTX 200, exactly the same motorcycle.

Месяц назад

I run a 212 'Stagev3+' (big valve, 275 cam etc) with a Keihin 26PWK and even that is too much carb so a 28 defitely is. Gas velocity = throttle response, a big choke is all top end.

@AnGryCruizer Месяц назад

If i got a ghost could i use the flywheel off my ducar so i can build my ducar up an use the ghost in the meantime or should i just get the duro440cc

@MinibikeAbe-89 3 месяца назад

Awesome build 👍

@smokeyi477 3 месяца назад

Is this the new upgraded one ?

@aaleexsaalaazaar 3 месяца назад

New upgraded one?

@bl_jacobs 3 месяца назад

@@aaleexsaalaazaarthey came out with a hemi one now that’s why they had to take the 224 off the harbor freight website for a bit

@-_-OB1 Месяц назад

What's the purpose of going to 5+ clicks on the torque wrench? Just habit?

@PnVG22 14 дней назад

Would you still use the lash cap on the exhaust side with the automotive style rockers ?? SOS

@shotbyzaystudio 3 месяца назад

perfect video at the right time

@Gloucester_minibiking 2 месяца назад

How do you get your throttle to spring back on the 224 because I can’t figure out how to do it on mine

@samaxeman123 3 месяца назад

superman 265 is a great cam, i get 8000rpm out of it with 22 pound valve springs and a 24mm flatslide

@alexytgaming4543 3 месяца назад

For real did you install those parts on the 224 or 212?

@Deucealive75 3 месяца назад

@@alexytgaming4543 You can use this cam on any OHV small block except the non hemi Predator. I have one in one of my 196's.

@samaxeman123 3 месяца назад

@@alexytgaming4543 212 non hemi

@dwaynebowman2175 2 месяца назад

Would you be able to tune my 196cc

@MFU.team.4367 2 месяца назад

He’s has put out so many helpful videos, I’m sure if you really tried and paid close attention you can do it yourself. I don’t think he’s missed anything when it comes to these engines

@sjanzeir 3 месяца назад

So what's the deal with that Geo? What happened to the Accord?

@Black66 3 месяца назад

Both are still around.

@sjanzeir 3 месяца назад

@@Black66 🙏 Come on, man! You gotta do us a quick video on that Geo! I have a soft spot for small Japanese cars made between the late 1980s and the mid-1990s! 🥹

@Black66 3 месяца назад

@@sjanzeir I could but the Geo would out shine all the bikes! 👍👍

@sjanzeir 3 месяца назад

@@Black66 😭