Pressure Cooker "No Power" Fix

Подписаться 11 тыс.

Просмотров 62 тыс.

50% 1

No power? Dead? How? Ohhhhh, it's from a "safety device?" Maybe it can be fixed...
DISCLAIMER: MARK YOUNG MAKES NO WARRANTY/GUARANTEE, EXPRESSED OR IMPLIED, AS TO THE RESULTS OBTAINED FROM THE USE OF THE INFORMATION CONTAINED IN THIS VIDEO OR ON THIS PAGE/PLATFORM, DIRECTLY OR THROUGH THIRD PARTY SHARING. UNDER NO CIRCUMSTANCES WILL MARK YOUNG BE RESPONSIBLE OR LIABLE IN ANY WAY FOR ANY CONTENT, INCLUDING BUT NOT LIMITED TO, ANY ERRORS OR OMISSIONS IN THE CONTENT, EXPRESSLY OR IMPLIED, OR FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF ANY CONTENT COMMUNICATED OR IMPLIED IN THIS VIDEO AND/OR ON THIS PAGE/PLATFORM, WHETHER BY MARK YOUNG OR ANY THIRD PARTY. IN NO EVENT SHALL MARK YOUNG BE HELD LIABLE FOR ANY CERTAIN, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OR USE OF ANY INFORMATION COMMUNICATED ASSOCIATED WITH THIS VIDEO AND/OR PAGE/PLATFORM. THE INFORMATION PROVIDED SHOULD NOT REPLACE PROFESSIONAL ADVICE. THIS AGREEMENT ALSO EXTENDS TO ANYONE AND/OR ANYTHING, THIRD PARTY, WHICH MAY BE ASSOCIATED WITH THIS VIDEO, PAGE/PLATFORM, AND/OR MARK YOUNG. MARK YOUNG MAY, AT ANY TIME, REVISE THE INFORMATION ON THIS VIDEO AND/OR PAGE/PLATFORM WITHOUT NOTICE, AND MAKES NO COMMITMENT TO UPDATE THIS INFORMATION. NECESSARY SAFETY EQUIPMENT/ENVIRONMENT, DISPLAYED OR NOT, DISCUSSED OR NOT, IS UP TO THE USER TO DETERMINE WHAT IS NEEDED FOR THEIR OWN SAFETY, THE SAFETY OF OTHERS, AND PROPERTY.

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 118

@belieftransformation Год назад

Thanks for the clear instructions! My instant pot manufacturer wouldn’t tell me what to do to fix mine; they only wanted to give me a discount to buy another expensive one.

@paulinemuugu8773 2 года назад

The tutorial is so helpful.. I have regained the hope of my pressure cooker working again... It's still under warranty...

@doreenbibby7941 3 года назад

Thank You 🙏🏿 for showing how to fix the pressure cooker your video’s the easiest to understand.

@JoshuaScott 2 года назад

I found the right thermal fuse in my old rice cooker. Works great. Thanks for the video.

@oersson Год назад

Brilliant! We had an old rice cooker that also died. I suspect now that it was a similar fuse. UNfortunately, we discarded it as it was no longer under warranty. Darn, I wish I had known that is a feature of these appliances and would have looked for it.

@brianstone2142 4 года назад

Thank you I fixed my pressure cooker also. Just bypassed the fuse. Works fantastic. Back to canning

@contact4mwy7 4 года назад

It's safer to have the fuse in place, Brian. I wouldn't want to you to have an incident with it because it didn't have a fuse to disconnect the power when it should.

@oersson Год назад

@@contact4mwy7 Agreed! The fuse is a safety feature to prevent overheating of the wire that could start a fire. So, although removing the dead fuse and reconnecting the wires will restore power to the device it is not really recommended. That said, not sure if it really practically matters that much!

@Robert-00768 Год назад

This is what I did. I will grab a fuse eventually but I am mid-cooking and don't want to change up everything because this thing did not like me sautéing so long...

@mommie3957 4 года назад

Great video!!! Thank you so much! I asked my boyfriend to help me fix our IP, so we can make more vegan food for the neighborhood.🌱👏👏👏

@mahalomana2 3 года назад

Thanks Mark I will check again! I have the "Power Cooker XL" but under the hood very similar. There is a small fuse on the ckt board on mine that is good. Checked continuity and all was good there too. Mine died right in the middle of some cooking up a batch of stew....luckily just transferred to our Duo pressure cooker and cooked on the Weber Range out back.

@contact4mwy7 3 года назад

The fuse you saw on the circuit board, was it a glass tube type? The fuse I replaced is not the glass type, you can't see through it. It was inline with the main power coming into the pressure cooker. Kinda looked like a pill with wire coming out of each end.

@JeffGoodin-du4fi 3 дня назад

Great job...Now I'm off to fix mine...Thank you

@caleblancaster5471 10 месяцев назад

Saved me from buying a replacement. Thank you!

@JonTanOsb 6 дней назад

The problem I found was the plug in the back of the Instant Pot was loose. I pushed it in, plugged it back into the wall outlet, and it worked. Sometimes, it's just a simple thing. Jon in rural BC, Canada

@bloodyandmuddy 4 года назад

Thank you so much for making this informative video. Just what I needed. will try.

@maurice7413 Год назад

I see the word amp/amperage. I believe this is a thermal fuse. The ones I see are around 185 degrees C, but as Mark has said, you need to check the rating on yours. You have to locate it first anyway, so get the right one.

@lynnp.4803 Год назад

I will give this a try! Thanks for sharing this!

@AlJacksonSongwriter 4 года назад

Nice descriptive tutorial, my friend. I feel that I could actually pull that fix off, if I needed to. You're the man! AJ

@marcaoutar2713 11 месяцев назад

Thanks for this video. I replaced it once before and it worked for a while. But now blew again, is there another way it can be wired, maybe higher fuse

@contact4mwy7 11 месяцев назад

As tempting as that sounds, it's safer to stay with the same rating fuse as was put in from the factory to avoid having the unit catch fire. 🔥

@EasternAmerica Год назад

I can't wait to tackle this project, thanks in advance ☺️

@wobblysauce 4 года назад

Nice fix that some would just throw away, try to send back.

@contact4mwy7 4 года назад

Thank you! I hope you are doing well, and happy New year!

@DwalkerAfterEffectsTemplates 4 года назад

Wow I just Fixed mine thanks a lot !!!!! Great Video !!!

@numnuhs714 2 года назад

My power xl pressure cooker turns on, but shuts off power completely after using it for 5 minutes, any ideas on what to replace?

@lorettasegura4091 Год назад

Mine is doing the same thing. I am wondering if it is the fuse. I can’t find info. on it.

@robertpinedajr4846 Год назад

Great video 👍🙏

@lishabui7713 Год назад

Thank you this helped me save my pressure cooker!!

@osiris8693 Год назад

Thank you amazing it work God bless

@annahaidinger7301 3 года назад

hi Mark my instant pot has the same problem about the fuse, can you tell me if thid fuse has any especial name or i just ask for fuse at amazon

@contact4mwy7 3 года назад

Hello! I believe this is what you are looking for, but check carefully to be sure, and take great care in replacing it. www.amazon.com/Twin-Pack-Thermal-Electric-Pressure/dp/B07M6GM4RV Send me an update if you wouldn't mind!

@mariajara6791 2 года назад

Oh boy! I don’t think I can do this. Well, the older models, I mean the first ones ever, lasted for ever. At the most, you had to replace the rubber band from the lid.

@talbotcolleen 2 года назад

Thank you! Your tutorial was so informative, I think I'm empowered sufficiently to replace the fuse on my Power XL myself! Do I need to search for the fuse specific to my model or is this a generic part that can be used interchangeably? TIA!

@contact4mwy7 2 года назад

I think the fuses may be product specific, so I recommend you take the bad fuse out of your unit and read the numbers on it. Amps, volts. Then search for one that matches.

@talbotcolleen 2 года назад

@@contact4mwy7 thank you for the speedy response...much appreciated!

@Skratchy9 Год назад

I know this is an old video but still very helpful. Helped me fix mine. Did the blue plastic of the splices hold up to the heat ok? Luckily I have metal only splices. Thanks for the video.

@contact4mwy7 Год назад

Yes, they have held up and we still use it today, no problems.

@Skratchy9 Год назад

@@contact4mwy7 thank you so much for the reply. Great video

@plymouth5714 7 месяцев назад

Any idea if the seven segment led display on the Pressure King Pro can be repaired or replaced? The cooker works fine except that all of the numerical displays have stopped working, segments simply went dark one by one. I can still use the oven with the pre-set buttons, (they still light up) but I can't use the user select for altering the time of cooking. Trying to find if a replacement panel is available but no luck yet!

@contact4mwy7 7 месяцев назад

I'm sorry to hear it. Maybe someone has a replacement board out there. Honestly though, the prices have come down to where it just might be easier, and safer, to buy a new one. Mine is still going and we really like the way it cooks so many things!

@plymouth5714 7 месяцев назад

@@contact4mwy7 You're probably right about that - its just that I'm of the age to be from the time when things used to get repaired when they went wrong (and to be repairable!) Chucking out something that still sort of works always goes against the grain! Ah well, lets see what they're down to on ebay!😁

@patf6957 Год назад

Tried crimping with lugs. Didn't work - the connections were too loose and, basically, just fell apart. So I soldered the connections which wasn't as troublesome as I thought and produced strong connections that I couldn't pull apart. Hope this holds together and I wonder just how hot it gets at these spots at the bottom of the device.

@f.x.macasac7396 Год назад

Very good job!! Tks

@dancook4993 2 года назад

Very good Job

@gabby389 4 месяца назад

Hi nice work… kindly what do you think could be my problem coz mine was working fine but all of a sudden it stopped showing anything on the display but it sure does make that beep sound when turned on but no info on the display….. even when i touch the buttons. Its insignia

@contact4mwy7 4 месяца назад

Sounds like it's getting power, but perhaps something in the circuit board that drives the display may have broke down. Maybe buy a new one? The prices have come down a lot.

@Bidantz Год назад

Assuming a fuse has blown when power dose not come on, but did not blow from overheating , but due to manhandling a lid when tried place lid on when it was not seated correctly , became stuck & forced it open in removing....there was no heat at that time but plug was still in....question is , is this a 'fuse ' problem?

@aparecidomiranda6637 3 года назад

👍👍🇧🇷 Parabéns Ótimo

@GravitySucks2000 3 года назад

Nice one Mark.

@marcpaully9768 Год назад

Hi Mark how do you know which fuse to buy,i have a silvercrest multi cooker and the fuses have no markings,numbers on them,could you help with any information,i would be eternally gratefull

@contact4mwy7 Год назад

You may need to look further on the internet for a replacement. I cannot say they are all the same. If you have a owners manual, maybe it would say in that where there is a wiring diagram?

@vickyempson5606 Год назад

I have a pressure king pro that has lost the disply as per the video. Ive located the fuse an what type to buy. But theres actually 2x fuses. How do i know which one it is. Ones on a red cable and the other is on a blue cable. Thank you

@contact4mwy7 Год назад

I would use a tester set for ohms or continuity, placing the probes to metal on each side of the fuse, with the unit unplugged. If the fuse is good, it will show almost no ohms across it. If it's bad, it will show a high number of ohms, close to infinity, meaning it is no longer passing electricity. Make sense?

@miguelbarrero5572 3 года назад

How is it holding? Is your pressure cooker still working? Nice fix with those connectors

@contact4mwy7 3 года назад

It's working good as new again! Some people would probably have thrown it away and bought another one, but I'm glad I fixed it instead.

@miguelbarrero5572 3 года назад

@@contact4mwy7 GREATTT!!! My mom's pressure cooker is not turning on, so I'm going to do the same thing you did. But I have a question what is the causes for the fuse to blow? Do you know?

@contact4mwy7 3 года назад

In my case the water steamed away by accident and caused the cooker to overheat. The fuse blew as a result, but I am not one hundred percent sure of the relationship between the two.

@miguelbarrero5572 3 года назад

@@contact4mwy7 Ahhhh ok. Thank you for replying and great video. Tomorrow I'll be getting the new fuse, wish me luck :)

@contact4mwy7 3 года назад

Good luck, take your time!

@goku445 8 месяцев назад

Strange that. I often had my Instant Pot in "Too hot" mode from not having enough water but the fuse never blew. Also why did you buy this brand instead of the instant pot?

@contact4mwy7 8 месяцев назад

This one got good reviews and has all of the features I wanted. I'm still using it and have not blown another fuse yet.

@averycolnite3561 Год назад

Great video! 👍 What about if all the settings work and there is power to the touch pad panel up until you press "START" and it doesn't heat - is that a short? Also my model is discontinued, Cooks Companion fromSHOPHQ, evine back then. Is there anything that can be done to salvage it if it needs a new touch pad? Does it have to be the exact same model? Thanks!

@contact4mwy7 Год назад

If everything else works, but no heat, it could be the heating element itself maybe? I try to stay with the same brand name for comparability. Fortunately they are plentiful now if you have to buy a new one to replace this one entirely.

@averycolnite3561 Год назад

@@contact4mwy7 Thanks for responding. Yes, there's power to the unit, I can select what I want to cook. All of that works just fine. Only problem is when I press START, nothing happens - no click, no beep, and absolutely no heat. I'm willing to bet that it's the button itself which means the whole control pad has been rendered useless. I can tell because the button feels really loose when I press it, like it's disconnected underneath the plastic. Think I'll take your advice and replace the entire pressure cooker. It just seems like a total waste though, y'know? But better safe than sorry. Thanks again, Mark, and have a great day (or night).

@pappysproductions Год назад

Hey. Would be great to have a link to the fuses in the description.

@contact4mwy7 Год назад

Assuming all units used the same fuse rating.

@CWhite-ks5vn 9 месяцев назад

Thanks for sharing My pressure cooker stop working

@nefariousjohnson8851 3 года назад

Grrrr8 video 👍

@jacobh4687 4 года назад

Make another video on the vintage air compressor

@EasternAmerica Год назад

What are those connectors called? Thanks in advance.

@contact4mwy7 Год назад

I think they are called "butt connectors" or "barrel connectors"? They crimp together the wires with the fuse.

@mila-goldfinch 2 года назад

Pleas what kind of fuse is it....what I have to search for....thanks you...

@contact4mwy7 2 года назад

That depends on the information stamped on the fuse, or in the schematic diagram. The correct amps number that matches your unit. I don't know if they are all the same. Brand and model number search can sometimes lead to the correct replacement part. If you find the original fuse inside the unit (with it unplugged of course) you can get the numbers and info from it?

@Da-ij3bg 2 года назад

Does the direction of the fuse matter?

@contact4mwy7 2 года назад

No, it should not matter.

@lelolahi 3 года назад

When it worked I said haaaayyyyy hhhh

@fatemashanta4474 2 года назад

My instant pot has a problem. Button is not working. How can solve it?

@contact4mwy7 2 года назад

If it has power but a button is not working, the panel that contains the buttons may need to be replaced. I do not know if that is something that a replacement can be found. Try searching the internet, but you may end up replacing the whole instant pot with a new or used one.

@nosam1972 2 года назад

the fuse... tnks

@germanguzman8033 Месяц назад

I bypassed the thermal fuse to test, nothing happened. The other fuse doesn't seem blown ... nothing

@contact4mwy7 Месяц назад

@@germanguzman8033 it might be time to buy a new one.

@kennethbrown8612 2 года назад

Hello can let me know with one ordered sir ?

@contact4mwy7 2 года назад

I wish I could, but because I don't know if they all use the same one it would be best if you can verify the numbers on the original fuse. The voltage rating and the amps or watts rating. Always refer to a qualified electrician when in doubt for safety.

@squad5339 3 года назад

my pressure cooker not show display but when i touch out side...i shock because the pressure cooker have leaking current

@contact4mwy7 3 года назад

That is definitely a dangerous problem! See if you can find a repair place near you and stop using it until it is fixed. Or buy a new one to replace it? Be very careful!!

@EasternAmerica Год назад

I got the older gowise usa 8qt

@teeosp2577 3 года назад

Mine the light comes on but never goes hotter. only in warm.

@contact4mwy7 3 года назад

I'm sorry to hear this. It sounds like it is still getting power but something to do with the heating part of it is not functioning right.

@elijacobs1363 3 года назад

Does this fuse regulate the current or its only a safety fuse function?

@contact4mwy7 3 года назад

It is only a function of safety. If the electronics inside pull more than it's rated amps, it blows to keep everything else from burning up or possibly even starting a fire.

@elijacobs1363 3 года назад

@@contact4mwy7 thank you so much...mine just happen to give up on me today...dont even know if i can find parts here where i live..lol...can i replace it with another type of fuse, a common kind? If so what amps?thank you so much

@contact4mwy7 3 года назад

It's a Thermal fuse rated for 250V and 10 amps. I don't think a regular fuse would be safe because it wouldn't sense if the insides were getting too hot. This is the replacement I bought from Amazon. www.amazon.com/Twin-Pack-Thermal-Electric-Pressure/dp/B07M6GM4RV

@elijacobs1363 3 года назад

@@contact4mwy7 thanks for ur help

@oersson Год назад

@@contact4mwy7 Sorry, I am a little confused. I located the fuse that connects the blue wires and indeed it is blown. (infinite resistance between the fuse ends.) But why would this have a 250V 10A fuse when the power to the device is 120V not 240 (USA)?

@tiffanysteen1845 2 года назад

Got link to the fuses

@contact4mwy7 2 года назад

I don't know if there is a "standard" fuse for all situations. You would need to search based on your appliance brand and model, or buy one that has the same voltage and amps/watts that is stamped on the original fuse.

@KIMTIDOU 2 года назад

Can you send me the link of amazon

@contact4mwy7 2 года назад

@karterjoseph1300 10 месяцев назад

This is what mines id doing now.

@contact4mwy7 10 месяцев назад

There's a good chance it's the thermal fuse, for safety. If the fuse can't be replaced, I would buy another one, the prices have come down a lot.

@mcmillan1963 2 года назад

Amazon link?

@contact4mwy7 2 года назад

@isa5537 3 года назад

Did you find those crimpers to be safe? Thank you for.this video, what makes me.mad, is.that my farberware only lasted a little.less than a yr. I knoe i got it at walmart, but didnt do the warranty. Also i just went and bought a new 8qrt by instapot.

@contact4mwy7 3 года назад

I believe I crimped them properly and they will not pull apart. I just used the unit yesterday and it's still going.

@isa5537 3 года назад

@@contact4mwy7 Well, if only i had looked up your youtubes last year, i would have saved a lot on the one I threw away. Do you know if plugging it in in a safety putlet has anything to do with triggering the fuse to blow? I was thinking my house wasnt wired right.

@contact4mwy7 3 года назад

I do not know if that would have an effect on it. I would not think so. I thought it was strange that my fuse blew from not having enough water in it. A power surge could be to blame as well I suppose.

@isa5537 3 года назад

Yes, i read some of the rules on the web before i found your youtube. Mine had a little bit of water on the sear level for steak. Maybe it wasnt enough, not sure. I thought it wS becAue i forgot i abaout the breaker safety bplugin. It did that to me last year, and i totally had forgotten about the safety plug doing that until after the fact it blew the fuse again on my new one. Well thank you again, im gonna and order my fuse.