Print On Hoodies Like A PRO w/ DTG

Подписаться 175 тыс.

Просмотров 60 тыс.

50% 1

This episode of Print Pros is full of tips and tricks for printing on a classic hoodie! Guillermo will take you through the process step by step so you can get it right on your first try and avoid ruining any of these pricier garments due to simple mistakes. Using the RICOH Ri 1000 DTG printer, he’ll teach you to master hoodies just in time for winter!
Check out the RICOH Ri 1000 DTG printer here: hubs.ly/H0tyYFr0
Find the pretreatment solution used in this video here: shop.ricoma.com/collections/d...
shop.ricoma.com/collections/d...
Learn more about the heat press used in this video here: shop.ricoma.com/collections/h...
Watch us use the RICOH Ri 1000 on T-shirts here: • Direct to Garment Prin...
Facebook Embroidery & Custom Apparel Mastery Group: / embroiderymastery
Join the Ricoma newsletter for educational blogs, videos, and live webinars: info.ricoma.com/newsletter
To learn more, schedule a virtual demo today: ricoma.com/US/virtual-demo
Get our latest Ricoma embroidery RU-vid videos sent straight to your Facebook Messenger: manychat.com/l2/RiCOMA.us
If you’re looking for a foolproof way to print on a hoodie, follow these steps!
First, press your hoodie with your heat press for ten seconds to iron out the garment and remove any moisture. For this project, we recommend threading the hoodie through the heat press as well as the DTG printer to avoid creating any indentations from the pocket on the front of the garment.
Next, it’s time to pretreat the hoodie! Hoodies are a much thicker material so you’ll need to saturate the printing area with twice as much pretreatment solution as you would with a T-shirt. Since you will be using more, Guillermo suggests using the bracket from your printer to mark where the pretreatment solution will go to avoid getting any excess on the other parts of the hoodie.
After pretreating the hoodie, you’ll want to press the garment once again to cure it. Keep pressing it until you feel the hoodie is dry and the Teflon sheet isn’t sticking to the solution. Once you’re done, the hoodie is ready to be printed on.
Like we mentioned before, make sure to thread your hoodie through the DTG printer so that the side you are printing on is lying flat on the printer’s surface and the other side is hanging below.
Press start and you’re off!

Хобби

Опубликовано:

17 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 155

@isabellemencia6471 3 года назад

These tips are super useful! 🙌🙌🙌

@ricomatv 3 года назад

Glad you think so!

@marcosbacan3382 3 года назад

Thanks for the tip!!!

@ricomatv 3 года назад

No problem! Thank YOU for watching!

@carolinavargas3207 3 года назад

Yes, I want to see you make the pre-treat station!

@ricomatv 3 года назад

So do we!

@melissabango363 3 года назад

I thought you could only print on T-shirts this whole time, so this is AWESOME to know! and yes, make the pre-treat station!

@ricomatv 3 года назад

The more you know... Thanks for watching!

@santiagoacosta2363 3 года назад

I want to see you make the pre-treat station!

@ricomatv 3 года назад

So do we! We've gotten so much enthusiasm the Guillermo's going to have to deliver now!

@salesiomwenda236 2 года назад

Nice job i like it brother

@ricomatv 2 года назад

We appreciate the compliment!

@Rickylicious1 2 года назад

Hi love your videos very helpful! Question if you have a video on printing hoodies when there are pockets in the front?? Thank you in advance

@ricomatv 2 года назад

HI there, thanks so much for watching. We haven't yet but this is a great idea. Thanks so much for passing it along!

@HaraDayaful 2 года назад

Put something under the area you're printing on, so it elevates that area higher than the pocket seams. And adjust the platen to the elevated area. I use dense cardboard, easy to cut to size.

@Rickylicious1 2 года назад

Thank you so much

@atlas.is.i Год назад

Just found your channel, this is so cool!!! I was wondering what you would do if you had a smaller design that wouldn't take up that whole space!! Also, are there any places where you can pay to have someone else do it for you?? I really only need to print something once, and I don't even know if I would ever use it again, and it's expensive just for a one time use, so yeah!! this was written at like 2 am, so sorry for bad wording

@ricomatv Год назад

Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery

@nydialoya1820 3 года назад

I always thought you could not touch the garment after you applied the pretreat and pressed it.

@reckr_dcollective 11 месяцев назад

thank you so much! i'm trying to form a clothing brand so this will help a lot!

@ricomatv 11 месяцев назад

So glad to hear that! Good luck!

@eduardohernandez6881 3 года назад

Which brand have the best soft style t- shirt to print DTG??by the way I print pinnies with DTG MACHINE??mesh fabric..thanks

@ricomatv 3 года назад

Hi there, if you'd like our list of our favorite wholesalers check out our list here: blog.ricoma.com/2019/06/06/top-10-wholesalers-for-all-of-your-embroidery-needs/

@grips7813 2 года назад

as far as printing settings go, Do you set the white underbase to the highest setting ie more ink? becaue my hoodies dont have the best results in defult printing mode. PS. nice printing Mr Affleck!!

@ricomatv 2 года назад

Hi there, please send an email to service@ricoma.com

@Jeremy_Davis 3 года назад

What kind of table do you recommend to use for the Ricoh RI 1000?

@ricomatv 3 года назад

Hi there, make sure to keep in mind the weight of the printer and we recommend anything with storage for all your supplies.

@lordlion5469 Год назад

Can it print any color and will it come off while washing the shirt

@ricomatv Год назад

Hi there, it can print any color and no. It can go up to 50 washes as long as you follow the washing instructions.

@gnarstygaming6910 3 года назад

Can we get a video on I depth color gate settings

@ricomatv 3 года назад

Thanks for the recommendation! We will look into creating a video on this topic!

@jaysicc6864 3 года назад

Yes...build the pretreatment station.

@ricomatv 3 года назад

Stay tuned to see future episode!

@racingjafi3167 3 года назад

Hi I'm jafi I had a small doubt about printing on garments only on the front facing and back facing is it possible or it can print on the sleeves also and how it so could you explain it 😊

@ricomatv 3 года назад

@carlosbarajas382 3 года назад

Yes

@ricomatv 2 года назад

Thanks for watching!

@f.a.k4914 2 года назад

Hey great video! Would you say a 80% cotton, 20 polyester hoodie is good to sell for a brand with DTG or 100% cotton for longer lasting print?

@ricomatv 2 года назад

Hi there, thanks so much for watching. Either of these hoodies, when pretreated properly, should last you 50+ washes.

@Roger-ob2ft 2 года назад

@@ricomatv But what about the regular clothes we buy from stores with graphics what do they do to make sure the prints don’t come off?

@elonmusk8665 3 года назад

Willlyyyy! 🤟🏽

@ricomatv 3 года назад

Thanks for watching!

@gullymaneway7300 2 года назад

I notice you still had pretreatment stain on your shirt is there a way to get that removed after words?? Btw great videos 🙌🏿

@ricomatv 2 года назад

A simple option to lessen minor pretreatment stains on certain garments is to manually steam the garment. This can be quite effective and is a quick fix to help reduce pretreatment stains from ruining your overall product. Thanks for watching!

@JesseB1983 3 года назад

Diggin' the Metallica-inspired Print Pros logo! 🤘

@ricomatv 3 года назад

We are too!

@carlosg.6252 3 года назад

Can you use DTG if the hoodie has 40%cotton 60%polyester ?

@ricomatv 3 года назад

yes!

@dtgwiz3728 3 года назад

Build the pretreat station 🙏🏼

@ricomatv 3 года назад

Thanks for watching!

@sylatheapollock4332 2 года назад

Are you going to build the pretreatment station? If so, when?

@ricomatv 2 года назад

Hi there, thanks so much for watching. You can pretreat your garments on any flat surface. Hope this helps!

@peezeegraphix2655 2 года назад

I’m interested in buying this heat press. But hesitant because of the beeping noise since I live in a apartment building. I saw that you can lift the handle before it starts beeping? I’m interested in the 16x20 one

@ricomatv 2 года назад

Hi there. Thank you for your interest in our machines! Make sure you fill out this form and the correct Ricoma distributor in your region will be in contact with you as soon as possible. ricoma.com/US/contact-us

@peezeegraphix2655 2 года назад

@@ricomatv can you lift the handle before it starts beeping?

@forcryingoutloud_2340 Год назад

Do you only sell to ppl in the US?

@Itsnotnotnadia Год назад

Ben Aflack? wth? lol ty!!! love the content

@ricomatv Год назад

Thanks for watching!

@itsjustla 2 года назад

Hi, what was the cotton content on this particular hoody?

@ricomatv 2 года назад

Hi there, thanks so much for watching, So sorry, but we don't recall!

@sarahburr1234 3 года назад

how long did you heat after the print for cure time i am new at this

@ricomatv 3 года назад

We recommend 40 to 60 seconds!

@valeriashcheglyatyeva4374 3 года назад

Cool design :)

@ricomatv 3 года назад

Thanks for watching!

@Xskramz_archivistX 2 года назад

Do you know any machine that make hoodie/t shirt without sewing it?

@ricomatv 2 года назад

@davidxmoravec 3 года назад

I see on your t-shirt after DTG printing marks after pre-treatment (square) .. How can I remove it?

@ricomatv 3 года назад

Hi David, thanks so much for watching. This should come off after the first wash! Hope this helps!

@angelmuly60 2 года назад

Can you please tell me the best sweatshirts to DTG print on

@ricomatv 2 года назад

Hi there, thanks so much for watching. Please check out our list of recommended wholesalers and suppliers. You can find it here under the files tab: facebook.com/groups/embroiderymastery

@EvanAlmighty76 3 года назад

Can You just let it dry naturally? Like half a day then air press it until ready? Seems my colors don't always come out right.

@ricomatv 3 года назад

Hi there, we recommend pressing it after printing it

@nyjenny242 2 года назад

@@ricomatv for how long ? And at which temperature?

@carlosg.6252 3 года назад

NEED HELP. What brand/type of hoodie do u use for DTG

@ricomatv 3 года назад

we get out hoodies from jiffy shirts!

@lil_miami7778 3 года назад

Could you please show how to print on hoodie sleeves.

@ricomatv 3 года назад

great suggestion! We will keep this in mind for future videos!

@Scott-gq3se 3 года назад

just run it down the middle. Tape the edges so they arent curled up.

@natalieharding3854 Год назад

I was wondering if you could print a design on the sleeves somehow?

@ricomatv Год назад

You can, depending on the design

@turnupking31 2 года назад

Do you have to pre treat the t-shirts as well?

@ricomatv 2 года назад

Yes, you have to pretreat all shirts unless you buy pre-treated shirts. Hope this helps!

@Captnsimon 2 года назад

Could you Link the teflon paper you use? cheers

@ricomatv 2 года назад

Here you are: shop.ricoma.com/collections/dtg/products/ricoma-16-x-20-teflon-paper

@Captnsimon 2 года назад

@@ricomatv cheers!

@R3ShOck 2 года назад

What is a good size for printing on a shirt

@ricomatv 2 года назад

If printing on adult size shirts, the standard size is 11” x 11” (or 11” wide by proportionate height).

@mrcashtees6135 2 года назад

After I make the first down payment would you guys ship it to me?

@ricomatv 2 года назад

You can reach out to our team here to discuss financing options! > ricoma.com/US/contact-us

@yolandafonseca5900 2 года назад

Sure

@ricomatv 2 года назад

Thanks for watching!

@karenramirez7225 3 года назад

Do you guys not offer the Freejet DTG??

@ricomatv 3 года назад

Not anymore we don’t

@mastercat 3 года назад

the mark of the heatpress will go away or still forever?

@ricomatv 3 года назад

That will go away! You can wash it out, apply some water or just steam it!

@sgtasapmusic 2 года назад

Matt Damon called & said give Ben Afleck his face back🙂

@ricomatv 2 года назад

LOL! Thanks for watching!

@mrcashtees6135 2 года назад

I’m really interested how can I purchase one?

@ricomatv 2 года назад

Fill out this form and one of our product specialists will reach out to you! > ricoma.com/US/contact-us

@FreshSpeak Год назад

Where you get the hoodie ?

@ricomatv Год назад

Hi there, you purchase them pretty much anywhere.

@yolandafonseca5900 2 года назад

Who’s the music by?

@ricomatv 2 года назад

Hi Yolanda! Were you referring to the music at the beginning?

@deepeshdhungana1837 Год назад

How much for the Ricoma presents the Ricoh Ri 1000

@ricomatv Год назад

Hi! Please submit a request with the team so they can provide you with some information ---> ricoma.com/US/contact-us

@kabasolouisbulaya3671 Год назад

How many can be printed in a day?

@ricomatv Год назад

You can print about 20 shirts per hour

@CREWZGIFTS 3 года назад

This ricoh printer available in India?

@ricomatv 3 года назад

Unfortunately, Ricoma only sells these printers in the US since we do not manufacture these printers. You can learn more about the Ricoma products available in your area by clicking here -> Ricoma.com/us/contact-us and specking with your local distributor!

@aliensnation23 11 месяцев назад

How does it cost for the machine?

@ricomatv 11 месяцев назад

Hi! Please submit your contact information so we can help! ---> ricoma.com/US/contact-us

@mrsjoy8831 Год назад

do you guys print for other businesses

@ricomatv Год назад

Hi there! We don't do custom work and only sell the machines to do them.

@mrsjoy8831 Год назад

@@ricomatv oooh ok

@allenjarvio 3 года назад

How would I print on sleeves?

@ricomatv 3 года назад

Hi there, stay tuned for upcoming episodes where we do sleeves!

@EvanAlmighty76 3 года назад

They do have a sleeve plate you can purchase.

@djcoke2994 Год назад

What hoodie is this?

@ricomatv Год назад

Hi there! Check out some hoodies through Sanmar.

@KGwideangle 3 года назад

Y didnt he finish the job, and do a final press of the hoodie?

@ricomatv 3 года назад

Hi there! This video focused more on the tips to creating a perfect hoodie, we'll make sure to show off the final product next time!

@Scott-gq3se 3 года назад

@@ricomatv yeah how long do you press it for? Thats vital no? Genuine question

@ricomatv 3 года назад

You generally press it for 30-45 seconds at the end to cure it

@pramilachhetri279 3 года назад

How much it cost for that machine?

@ricomatv 3 года назад

Hi there, If you'd like to learn about pricing and financing options you can connect with your product specialists here: ricoma.com/us/contact-us

@Itsmemac-16 3 года назад

how much one set ?

@ricomatv 3 года назад

Sorry, one set of what?

@Itsmemac-16 3 года назад

@@ricomatv how much it cost the dtg printer?

@bisket2003 2 года назад

Need to get a PT machine! Hand sprayers are garbage.

@ricomatv 2 года назад

Let us know if you need any help!

@yolandafonseca5900 2 года назад

Who’s is the by?

@ricomatv 2 года назад

Hi Yolanda! Were you referring to our DTG printer?

@salesiomwenda236 2 года назад

I am interested.how can we communicate

@ricomatv 2 года назад

Hello! If you are interested in purchasing our machines, please fill out this form ricoma.com/US/contact-us so that one of our product specialists can reach out to you! :)

@frenshyyosue Год назад

the host look like ben afleck ahaha

@ricomatv Год назад

Thanks for watching!

@radheykrishna3915 2 года назад

Hello sir, Can I order my favourite designed t-shirt? Can you make my favourable designed t-shirt?

@ricomatv 2 года назад

Hi there. We don't digitized, but you are welcome to check out Chroma, our Premier Digitizing Software. ricoma.com/US/software/chroma

@radheykrishna3915 2 года назад

@@ricomatv tq sir

@timp5332 Год назад

Why didn't he show the ink curing process?

@ricomatv Год назад

Hi Tim! This was a video for hoodies, but we have plenty of more content on our RU-vid channel regarding this, check out this video --> ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hFI-HB2bHDs.html

@leviteapparel 2 года назад

WOW, CAN YOU DO DTF?

@ricomatv 2 года назад

Hi Levite, thanks so much for watching. Unfortunately, we don't offer DTF at this time.

@KGwideangle 3 года назад

Quick tip. You shouldn't pre-retreat your garments in the same room as ur DTG printer.

@allenjarvio 3 года назад

How come?

@KGwideangle 3 года назад

@@allenjarvio it's just something they recommend in the RICO users manual

@allenjarvio 3 года назад

@@KGwideangle thanks for letting me know bro🙏🏽

@ricomatv 3 года назад

Thanks for the feedback!

@cryptostonks5282 2 года назад

Ben Affleck is that you? 😂

@ricomatv 2 года назад

Haha Guillermo actually got that a lot!

@galaxy29610 2 года назад

You really kill that hoodie you almost scorch the pretrement Did you know to much heat press for 30 seconds then 10 sec will leave a big box you should try to do 5 seconds at a time at 360 f just my advice

@ricomatv 2 года назад

Thanks for your feedback!