Pro Drywall Construction Crew with The Right Tools that GO FAST!

Подписаться 163 тыс.

Просмотров 544 тыс.

50% 1

Pro Drywall Construction Crew has got to gear up with the right tools for the job to not only go faster but make it easier on the body. We got to Tradetools' my favourite local tool store, to buy a load of tools to start a new business. This business you need more than just drywall tools, NEW video coming soon!
/ maxkilptyltd
Full Series - • Fastest Drywall Crew i...
See if you can guess. Which construction related business?
&
Whats your favorite cordless tool/skin in your trade? - Mine is the Makita 18V Drywall Cut Out Saw - • Makita 18V Drywall Cut...
Subscribe goo.gl/dDcLgJ
/ maxkil2
drywall hang cut router saw cut out screwgun drill screw install fix tape drywall taping,tools,fast,repair,mud,crack,hole,wall,plaster,mudding,joint,compound,joint compound,diy finish,topping,paper tape,gypsum,corner,trowel,knife,drywall finishing,plastering,taper,skim,coat,fastest,drywall construction crew working fast,maxkil,drywall hanging makita makita drywall screw gun makita 18v,diy drywall,drywall crew,pro drywall hanging,construction crew
If your a professional and your business provides this service in your local area, wherever you are in the world, I invite you to add your skill set to a listing on my website global.maxkil....

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 305

@AnthonyBarnett-ez3ni 8 месяцев назад

Longest sheets of drywall I've ever seen in my life

@Maxkil 8 месяцев назад

hell yeah!, its thin though. dont be fooled we are not that strong

@GigaChad-lr2gx 4 месяца назад

How long are they? 16ft?

@Jabberwok28 2 месяца назад

I was going to say, are they like 3/8”?

@atedinahalf6288 2 месяца назад

@@Jabberwok28It's probably a half inch.

@bigears4014 2 месяца назад

@ated1inahalf6288 10mm 6m

@kerryklopfstein4260 Месяц назад

I hung drywall for 17 years, I wish this light weight stuff was available in my day. Well done guys.

@chriscrowell-lv7wm Месяц назад

those gentlemen are mechanics not just hangers and yes when i was hanging in the glory days it wasnt as easy

@macduff14 2 месяца назад

I used to carry 2 x 12.5 up apartment stairs .... on own . I would fit 60 sheets a day . 12.5mm. I'm 60 now . I got one metal hip at 50 year old . And the other one is on its way.

@شربلمانزا 6 месяцев назад

Watching these guys motivate me to perfect my Drywall jobs. Job well done with precision.

@smellygoatacres 10 месяцев назад

As a former painter, a good drywall crew is important. Paint can cover a lot of crap and caulk can make a poor trim job look decent but bad drywall is impossible to pretty up.

@Maxkil 10 месяцев назад

yeah mate I agree

@MAGAMAN 8 месяцев назад

This is why I am replacing all the drywall in me house.

@midwest_nikk2682 5 месяцев назад

Any good finisher can hide the dry walkers mistakes.

@edwinwise6751 Год назад

Been in construction most of my life as a contractor, these guys are the real deal. I wish my crews had been 1/2 this fast

@Dubyea 10 месяцев назад

Yea no kidding. The large boards not joints… most crews would take them 15 20 mins to do that wall

@michelchartrand7257 9 месяцев назад

Chances are that they are making much more though.

@ianreiner1586 8 месяцев назад

they would have been faster if 3 out of 3 all had tattoos then they work harder too not pay their rent and work for another paint on their body. lol

@DomesticDave 10 месяцев назад

No insulation or sound proofing???????

@davidh7300 2 месяца назад

I'm a carpenter that hangs drywall once a blue moon maybe on a rainy day. Just watching you guys for 5 minutes will help me up my game. First off I mark both sides of the piece to verify square. I think I will keep that habit I get paid well but don't have to fly like you guys, just hustle a little. Yeah a drywall crew would fire me.

@harryhoudini2645 9 месяцев назад

Why are you leaving gap at top and seeing board on floor. We always went tight to ceiling and left gap at floor

@Josh_D03 8 месяцев назад

We d the same thing in the states on commercial buildings. Metal flexes so we put in plastic made for that so the rock doesn't crack. Basically an expansion joint

@BENABARE 2 месяца назад

I know that in Australia they use cornice which covers that gap

@dragonf1092 2 месяца назад

Yep the floor trim covers the gap.

@dragonf1092 2 месяца назад

I wouldn't hire these guys to sheetrock anything.

@SaerTurner-wn2qh 2 месяца назад

Every Drywaller and boarder Gets my Respect over 40 years in the trades and Drywall well its takes a special bread I hate it can do it but no ..So my Respect boys

@afridgetoofar1818 2 месяца назад

I always use screws when I hang drywall. Takes a little longer, but much less likely to pop over time.

@fredsavage4925 4 месяца назад

Sometimes you pay for a man's expertise, sometimes for his tools. You get both with this crew. Top dollar for top work is where it's at.

@jasonalba7679 10 месяцев назад

Never seen sheet that long.good job guys.

@harryhoudini2645 9 месяцев назад

14 footers probably hung many of them you can also get 54"instead of standard 48" for 9 foot ceilings

@Josh_D03 8 месяцев назад

Might even be 16' I've hung many over the years

@82acresfarm Месяц назад

@harryhoudini2645 20ft sheets 3/8" standard in australia

@breeze787 20 дней назад

Are these guys always in the zone? They seem so content.

@MattMc365 10 месяцев назад

Wild lookin studs . I’ve been framing metal for over 20 yrs , mostly piece work . That framing looks a bit different than here in the US. :)

@MAG-1234 Месяц назад

Made me tired but inspired just from watching these craftsmen work! I'm teaching myself how to really lay block at the age of 47, and seeing these guys turn and burn is awesome!

@Maxkil Месяц назад

yeah I really want to learn more, some day I want a farm and to build some things myself!. Never too old to learn something new I say

@jordanholmes4052 Месяц назад

Wow I've never seen sheets this long🤣 what are these weighing in at? I've just invested in one off them cutters that your using too trim round the doors on this video recently, it's fair too say they are quicker than a jab saw🤣 save a lot off time when trimming around sockets etc. Top job boys👌🏻

@JoeBaugh-v9o Месяц назад

These guys are for real!🔥💯💯

@williamrobinson8867 Месяц назад

I been doing it 51 years u earn your money people in offices should never complain

@Maxkil Месяц назад

Hey William, for sure. Its not easy but wouldn't want to work in an office too! 51 years that's awesome.. you would have seen some things. I would love to hear some stories

@tvpi-z1v 7 месяцев назад

thats a good crew, finish at 12 down too the local :)

@geneo1976 10 месяцев назад

Are you leaving out where you cut out where the receptacles are in the rooms? NEC code spec are supposed to be every 12' around a room. I didn't see anything exposed. I didn't see any switches either. I have done my share of sheetrock work over the years. Great job, just asking.

@Maxkil 10 месяцев назад

The electrician does that and they are all marked out prior to sheeting and get pulled through later

@kelvindawe5123 11 месяцев назад

Fast work chaps god nows where you get sheets that length but most amazingly you must have the only makita screw guns that don't constantly jam up my 2 drive me mantal keep it up chaps.

@82acresfarm Месяц назад

I thought the same about the makita but all the drywall crews in australia seem to use them exclusively

@mattheweggers8345 Месяц назад

No there men im59 been do stuff like that for 40 yrs still walkin upright

@skliros9235 3 года назад

Are these cheap homes you're working on? With the metal studs, thin drywall, and no insulation, sound must travel across the house with ease.

@arod6789 3 года назад

Who insulates an interior wall?

@craigpalmer256467 3 года назад

@@arod6789 pretty much every country besides Australia

@jonathoncarranza4414 3 года назад

@@craigpalmer256467 alot of interior wall are not insulated in homes it's just the exterior for heat amd cold

@whoobie2008 3 года назад

I noticed there are no electrical boxes.

@arod6789 3 года назад

@@craigpalmer256467 haven't seen any and I'm in the US

@kasteelvannieuwland8875 9 месяцев назад

No insulation in the wall? Gonna be a noizy house...

@billmulkins3217 10 месяцев назад

Never seen sheet rock that long.

@LEK-we2hh 10 месяцев назад

You just did 🤭

@82acresfarm Месяц назад

Its standard size in Australia

@hhusain88 Месяц назад

rebull can at 4:26 is still there when they put the drywall at 6:56. lol enjoy the ants 🤣

@Maxkil Месяц назад

We eat ants here in Australia

@WarrenKelly-fq9ro 20 дней назад

Faster is not always better.

@LearningOfOld 6 месяцев назад

That’s the longest sheets of drywall I’ve seen

@noelnichols3554 Месяц назад

What ya gona do with that crack at the top? I hung rock for 40 + years, commercial and residential. Commercial starts at the bottom and residential starts at the top. I they would have pushed the top wall piece up to the ceiling there wouldn't be a crack, and the finisher 's job would be a lot easer...

@Maxkil Месяц назад

It gets cornice, otherwise they would need to get wider board

@82acresfarm Месяц назад

Australia has cornice everywhere as standard

@ianreiner1586 8 месяцев назад

na all ya need to be a good drywaller is a sleeveless Iron Maiden shirt and some acid Rock.... I am a Carpenter btw

@Maxkil 8 месяцев назад

Iron maiden. Hell yeah, with rips in it.

@gordonclark7632 9 месяцев назад

Now that is efficiency. Is the guy doing the cutting called the 'cut guy' like the framers use?

@robertbutler8004 9 месяцев назад

That can't be in Australia because they did not use stud adhesive on the studs before fixing the sheeting!

@Maxkil 9 месяцев назад

Yeah we did

@lewisriggs6596 10 месяцев назад

These guys are good but why gaps at the too

@scouseaussie1638 10 месяцев назад

Crown moulding goes there

@danielrutigliano7938 10 месяцев назад

3/8 inch...for ceilings maybe. Those walls are paper thin.

@frostbite1991 10 месяцев назад

lived in a crappy house with walls that thin. Made many repairs when moving out. Just a minor bump between the studs would break it. Awful stuff. New house has 1" thick walls, a bit overkill but it was built to last over a century.

@scherm5514 5 месяцев назад

Gotta love Australia. 20 foot boards. Cornice everywhere.

@Maxkil 5 месяцев назад

Yeah, the sheets are thinner to elsewhere you know. Only 10mm walls 🫣

@82acresfarm Месяц назад

@@Maxkil you can get 10 mm in europe as well but 12.5 is the most common. Soundproofing is more common too. I did a job where all the internal walls were sound deadened and double hung first layer with moisture resistant and second with knauf purple board. That stuff is heavy and rediculously hard to cut. Also need special screws to fix it, found that out through trial and error mostly error😅. Great watching you guys work though learnt a heap. Miss the 6m sheets everything is 2.5-3m max here.

@Ryan-yb3bf 10 месяцев назад

Dude has some SICK tattoos.

@Bryanvaughn-s4t 7 месяцев назад

Swisted showed up to the party

@willj8610 10 месяцев назад

Yep that was a huge Milwaukee tool haul, pity every tool on site is Makita

@ELPeeDubYou 2 месяца назад

Try that with 5/8" 😂 JK...thats how it done, son!

@WarrenKelly-fq9ro 20 дней назад

What's with the huge gap in the top angle? I see boarders starting on the top sheet first then lower, a huge amount of boarders never take into account of how a taper would do his job without unnecessary butt joints,screw nibs not recessed.

@galegregory97comcast 2 года назад

These guys right here Mexican put it up as fast as the other guys can tape it off what you think

@WickedLobstah978 6 месяцев назад

All can hang by themselves and are fast. Ive been hanging over 20 years. Ive never seen framing like that though. Its nice to get a square open layout like that. Pretty fast with those screw guns you guys use. Couldnt pay me enough to run those but I gotta give you credit for the speed with them. I could definitely work with these guys, but not running that monstrosity of a gun lol. Hand fed screwing is the best and fastest (for me). Good work though guys!

@edmarcarlos6332 3 года назад

Vcs trabalham muito estão de parabéns pelo serviço... Brasil...

@randallfrank5682 Месяц назад

Impressive sheetrock handling.

@jimmys511 10 месяцев назад

You guys are quick

@ACDC940 10 месяцев назад

Fukin easy with one cut per wall. Try this on a reno

@darenrrful 10 месяцев назад

why dont you put the drywall all the way up

@markhodges1276 10 месяцев назад

Cornice (coving) closes the gap. Leaving a gap makes it much easier to hang. If they were going to tape and mud the corners then for sure they would hang a tighter fit.

@Maxkil 10 месяцев назад

@markhodges1276 yeah mate, we put the bottom sheet on a block of plasterboard then sit the next one on it. Cornice finishes the top

@jw8556 10 месяцев назад

You want the right crew to get it done you gotta pay the right bucks good tradies are worth there weight in the best tools

@Maxkil 10 месяцев назад

Sure are

@chenlee3240 2 месяца назад

100 times faster then me but mine is better, I like it tight against the ceiling it helps support the edges of the lid.

@Maxkil 2 месяца назад

Yeah we have a cornice that goes up for that., if you want it tight here you would need to buy a wider sheet and cut every sheet down

@dubiousdistinction6500 Месяц назад

1 5/8 steel studs in a house?

@caminhoneiroborbainternaci816 3 года назад

Love drywall

@kombaster9398 Месяц назад

I love too....but to looking only.Bad memories from Vienna Austria.The serbian guy never paid me for the months as drywall worker.But one polish guy stole all of his tools because the serbian didn't paid to him two weeks for the plastering.

@topsyball1049 Год назад

Weird..drywall not stacked on the wall, cutting it on the floor. Metal studs in a home.? Walls to not go all way to the ceiling. Is this professional.

@Maxkil Год назад

They stack plasterboard on the floor for safety reasons as well not put the weight of the stack on the walls, I suppose.

@MAGAMAN 8 месяцев назад

It will never not bother me seeing people do drywall from the ground up instead of the ceiling down.

@Maxkil 8 месяцев назад

You know why?

@Itakiki 7 месяцев назад

Genuinely curious, but to my knowledge you start from top down so that the inside corner joint for the ceiling has 2 factory edges for finishing. Ifyou don't care about that though going bottom up is easier to hang, since you can balance the top sheet on the bottom sheet. Cool video though!

@dragonf1092 2 месяца назад

Where the hell did they learn to hang Sheetrock big gap between the ceiling and the wall.

@xander1756 Месяц назад

55 or 90mm Cornice covers the gap. Where did you gain your Sheetrock knowledge from?

@mikescaffo4850 10 месяцев назад

He'll no but they are great workers

@markhodges1276 10 месяцев назад

Why do builds in Aus not often use interior wall insulation? Are they just being cheap?

@Maxkil 10 месяцев назад

Yes they are being cheap

@vangogh1588 10 месяцев назад

I dunno.. Maybe so that if you fart on one room people in the other don't hear it?

@smellygoatacres 10 месяцев назад

No reason to insulate interior walls. Duh

@markhodges1276 10 месяцев назад

@h2s142 For sound primarily, but also thermal. If you have a multizone ducted AC system, especially using newer tech with individual zone temperature settings, you can close doors to unused zones and have less thermal transfer, more efficient cooling/heating. But yeah the main reason is sound. It's very commonplace in most other parts of the world to have internal wall insulation, but Australia is so far behind the game with insulating buildings in general. We may not get the same cold weather as the northern hemisphere, but we get extreme heat. We still have new builds with 4mm glass, and limited wall insulation FFS

@markhodges1276 10 месяцев назад

@@smellygoatacres see above

@039raymond 10 месяцев назад

no soundinsulation between the drywall??

@XenPistolas-l6s 2 месяца назад

These men are fast, but I think they're never beat me at drywalling. Lol

@MattMc365 10 месяцев назад

Piece work , grab it and growl .

@drakerrules3513 6 месяцев назад

My 3 man crew does over 10k sqf a day

@wranther 3 года назад

Have you previously done a video on the framing requirements with metal studs down your way before? Appears very detailed behind the sheetrock. -Bob...

@victorguerrero4249 3 года назад

All the houses in Australia and New Zealand that are steel frame are pre fabricated and just assembled on site like a puzzle

@steventhebroker Год назад

@@victorguerrero4249 does that make it more economical and/or more efficient? If so, is there a way to bring that to the United States?

@victorguerrero4249 Год назад

@@steventhebroker less time less waste so easy a trained ape could assemble it

@steventhebroker Год назад

@@victorguerrero4249Lol. That’s dope. How do I go about getting that system here in South Florida? What’s the cost?

@houseofwonders1 11 месяцев назад

@@steventhebroker Pretty sure they build metal garages & shops like that in the US

@nickoregan7308 3 года назад

??? How long is that board

@dismaldog 3 года назад

6m-(20ft)

@michaelfahandez5042 3 года назад

Good job guys how long r those drywall? I love mudding

@Maxkil 3 года назад

6meters man, I love mudding as well. Everyone does I think 👍

@markhodges1276 10 месяцев назад

@@Maxkil I want to love it, but as a DIYer I just don't get enough reps. I spend more time swearing than mudding.

@dmitripogosian5084 10 месяцев назад

@@markhodges1276 As a DIYer, I hate mudding, painting, tiling etc. Much prefer screwing, nailing and assembling in general :)

@markhodges1276 10 месяцев назад

@@dmitripogosian5084 yeah any finishing trades are rough. They require technique which only comes from practice and repetition. I'll probably annoy a few chippys with this comment but framing just requires building code knowledge, the ability to measure and the right tools. Much more fun.

@dmitripogosian5084 10 месяцев назад

@@markhodges1276 Yep, that's why I always feel that plumbers, electricians, installers etc overcharge, while finishers ? I just bow and ready to pay anything they ask :)

@nemonucliosis 10 месяцев назад

Wow amazing! No drywallers in the history of drywalling have ever done this!!

@primer-sk6659 10 месяцев назад

В пустоту между листами нужно укладывать Шумоизоляция, иначе слышимость будет плохая.

@dmitripogosian5084 10 месяцев назад

Где то тут писали что изоляция, в том числе шумо, пойдет потом.

@1mandrywallarmytv144 3 года назад

apparently they do not believe in butt joints. lol those sheet are loooooong,

@marcarriaga3201 8 месяцев назад

Good work

@zachwagner1838 10 месяцев назад

Just curious about popped screws. Work behind guys with screw guns, and always have pops to deal with

@Ketchupbelongsonsteak 7 месяцев назад

Installed wrong . Nothing to do with them being screws.

@zachwagner1838 7 месяцев назад

@@Ketchupbelongsonsteak no shit!?. It was more or less about using the guns with bands, and just pumping and dumping… why I said, what about popped screws. Pump and dump, leave it for the finisher. Not my first day

@Ketchupbelongsonsteak 7 месяцев назад

@@zachwagner1838 I hate those guns. My shoulder can't push them.

@zachwagner1838 7 месяцев назад

@@Ketchupbelongsonsteak most of the hangers we work around nail the perimeter, screw off the field. Problem we come across is they don’t have the depth set right, pump and dump, and leave us with the mess. They use screw guns, but they aren’t the decking screw guns. That’s why I said, what do they do about popped screws. No good with the OG if not set, what about the decking screw gun? Even worse for wear

@Ketchupbelongsonsteak 7 месяцев назад

@@zachwagner1838 when I started we nailed perimeters. Now I never use nails but I glue when I can. Vapor barrier obviously not gluing there. The paper on the face of drywall is so thin these days it is hard to get screws that don't pop through but it is still possible guys just need to pay attention more. I'm still on the fence for cordless guns. I feel to often when I'm finishing I'm turning those in 1/8-1/4 turn before the sheet is actually tight and doesn't move when pushed on. I love gluing because less screws and in the case a screw does break paper the sheet still doesn't move so it's not coming back as a pop later.

@erasamus1057 9 месяцев назад

in my neck these guys get paid by the sheet, not the hour so it literally pays to be fast. not sure how it works there

@Maxkil 9 месяцев назад

yeah its by the meter, and in this case, the workers all have a share of the money, so everyone has an incentive to be productive

@EmilioGarcia-fr5po Месяц назад

Why the gap at ceiling joint sssss?

@Poddaszaszpachlowanie 3 года назад

Good job. Pozdrawiam z Polski.

@beenschmokin 10 месяцев назад

Professionals. But... it's Easier when the walls are straight.

@Chelovek_s_Divana Месяц назад

шумоизоляция в сделку не входила

@stevedunahugh2203 2 месяца назад

Laying board down on metal studs, not pros

@adi-d5902 3 года назад

What’s with the gaps at the top, curious

@stephenc4161 2 года назад

cornice

@HARRYYZ125 11 месяцев назад

But what if customer at a later date doesnt want coving..thats shocking you dont care. Amateur at best .

@markhodges1276 10 месяцев назад

@@HARRYYZ125 If you pull cornice anyway your going to need to hang new sheet. The cornice cement will take a good chunk out of the sheet on both wall and ceiling. Decision to use/not use coving would only be made on new build or major reno.

@jamesbasye2362 10 месяцев назад

If you cover up the studs and dont mark it how are you going to accurately screw it off on every stud

@Maxkil 10 месяцев назад

yeah good point, so need to mark it takes the guessing out of it

@harryhoudini2645 9 месяцев назад

Too much time if you have a good screw at top and bottom and you know your trade eyeball is all it takes.

@jamesbasye2362 9 месяцев назад

@@harryhoudini2645 the time it takes me to mark my studs is a fraction of the time fixing duds trying to not miss

@DavidBrown-ek8it 3 месяца назад

No screws in the feild ?

@Maxkil 3 месяца назад

Stud adhesive instead

@ryszardslaw6656 25 дней назад

Panowie walicie taki przekret ze az brak słów Gdzie wygłuszenie i przeciw skraplanie poddasza .To jest nabicie klienta na kasę. KIPSKA FIRMA

@blastmasterparker6358 Месяц назад

Used to run 2miles 530 am lift wieghts then lay hi density block all day or concrete

@zigwil153 10 месяцев назад

Shee-it, this boys are rockin'

@pinecone9045 15 дней назад

3/8"

@IsraelMedina-j7o Год назад

pretty fast, is that 1/2"? board? man 14' footers?

@dismaldog 10 месяцев назад

That be 10mm sheet,20 ft here.

@joshmanning3865 9 месяцев назад

Boss level shit 🔥

@Mael_GomM 5 месяцев назад

What’s the drill holder you guys use?

@dangelomack1 2 месяца назад

What are the tools being used?

@Maxkil 2 месяца назад

Makita collated screw guns

@kamelraja4062 Месяц назад

I would like to work woth you i have a 5 yeras experience about it iam here in east london

@williamrobinson8867 Месяц назад

That is half inch rock u wont hang five eights that fast

@Maxkil Месяц назад

For sure, this is 10mm thick, Its pretty light

@GabrielDwight-j4v 7 дней назад

Kling Islands

@davidmcpherson730 10 месяцев назад

They’d work faster with music. Drywall 101

@akdonlh9924 10 месяцев назад

1/2” lets see ya do it with 5/8

@sharkcity6607 4 месяца назад

Bro I’m a 3rd period apprentice in local 9144 San Jose. And I don’t even use that square to cut it. That’s wasting time. Not hating but out here you’ll get smoked

@dangtran_decoration 3 года назад

happy day verry nice

@Maxkil 3 года назад

Thanks you too. I want to go to Vietnam, I come work with you a few days

@hattemalhaar3135 10 месяцев назад

Why dont they put any insulation?

@markcook8451 10 месяцев назад

There only staking rock anybody can do that. I can see daylight in the top angles that's not right .I'm a professional for 50 years .l still work

@erikcable1755 9 месяцев назад

you have been dumb for 50 years as well

@jimmys511 10 месяцев назад

No insulation for sound proofing?

@Coolcarting 10 месяцев назад

@jackoneil4164 10 месяцев назад

What are those shoes covers called?

@ignatiustremor 2 месяца назад

Respect to the guys, but why work faster when you're paid by the hour and wasting your health away?

@Maxkil 2 месяца назад

We aren't paid by the hour, by the meter

@Suarez.24 6 месяцев назад

How long is that board?? 4,80 meters¿?

@Maxkil 6 месяцев назад

Our sheets come in 6.00 meters or 236.22 ″ for you Americans

@Suarez.24 6 месяцев назад

In arg. We only have sheets of 1.20 x 2.40 meters generally (standard). It is difficult to work with sheets of that size (6 meters), since they are not found in the market in our country. Thanks for the answer @@Maxkil