PRO'S Recommend THIS Circular Saw Guide!

Подписаться 399 тыс.

Просмотров 175 тыс.

50% 1

Circular Saw For Beginners Masterclass: bit.ly/3omII1I .How to Cut a Straight Line, Every Single Time with this Circular Saw Guide. This Jig will take you from a Novice to a Pro in no time at all and the best thing is that it is SO easy to make and you only need two tools to build it!
I hope you enjoy the video 👍😁🇦🇺
Before l go on...
Link to the Amazing Circular Saw Guide Plans: etsy.me/3yjHutJ
Link to All My Woodworking Plans: DiyForKnucklehe...
Since this video was made, the Circular Saw Masterclass is now LIVE: bit.ly/3omII1I
Buy Me a Coffee.
Please help my Channel to keep producing DIY Educational Content with a small donation. Your generosity is much appreciated. Many thanks in advance. Cheers. www.buymeacoff...
Tools l Use in the Video:
Makita Circular Saw: amzn.to/2qmUxV9
Makita Cordless Drill: amzn.to/3M9PzG7
Cordless Makita Laminate Trimmer. Full Kit with Battery and Charger Included: amzn.to/34VgotF
Safety Glasses: amzn.to/2YQwSAY
Safety Glasses That Can Be Worn Over Glasses: amzn.to/3geVeKw
Hearing Protection: amzn.to/38iipRz
Ways to Support my Channel:
👍 ➡️ Subscribe to my RU-vid Channel: / shaneconlan1
👕 Check out the Latest Swag from our New DIY For Knuckleheads Clothing and Accessories Store!
shop.spreadshi...
🛠 Tools of the Trade 🛠
Tools l Use, Resource Page:
diyforknuckleh....
Tubebuddy: Install TubeBuddy for free to help you get the most out of RU-vid! www.Tubebuddy..... …………..
My DIY For Knuckleheads Website: diyforknuckleh...
-------------
SOCIALS:
Instagram: / diy_for_knuc. .
Check us out on Facebook: / diyforknuckl. . …………..
Check out my NEW Spanish Channel! All the same videos but in Spanish! www.youtube.co....
Mailing Address:
DIY For Knuckleheads
P.O. Box 152
Sawtell, NSW, 2452
Australia.
------------
Music supplied by and Released under Creative Commons License 3.0.
Artist: Kevin McLeod
Music Title: Acid Jazz
Have a great day and l’ll see you again real soon. 😁
FTC Disclaimer:
This video is not sponsored. All items are purchased with my own money unless stated otherwise and opinions are my own.
If I do receive products for free, I will always disclose it and I will still always provide you with my honest opinion. This video and description contain affiliate links, which means that if you click on one of the qualifying product links, I’ll receive a small commission if you decide to make a purchase. This does not cost you anything extra and if you don't want to use the links, you can always Google the product separately, no worries. I am a participant in the Amazon affiliate program as well as TubeBuddy and others.
Links are provided for your convenience as well as my benefit. Some links are not affiliated but are shortened to preserve space in description box.
#circularsaw #circularsawguide #cutastraightline

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 376

@dinahplacido5786 Год назад

This saw ru-vid.comUgkx84IcU5pbZd1Qrz8u4-YRLmJax7kdRi7B comes in handy in many ways. When I had a small (dead) tree fall I started the process of disposal by using this saw and cutting off the small branches. Then slowly work on the small trunk with undercutting and letting it fall down. With many trees on acres of land paying for a tree service can be expensive. It also is nice in that it can be used in hard to get areas like along my creek. It's also safer and quieter than a chainsaw. It obviously can't cut down massive trees but it does work fine for small ones or brush. And of course since I already own a Black

@JesperMakes 2 года назад

I love everything about this - the simplicity of the jig, the storytelling. You're right, I'll need to start bingewatching Uncle Knackers!

@diyforknuckleheads 2 года назад

Hahahahha....good stuff Jesper! Yeah mate....doesn't get any easier than this one 👍 Hope you're well mate 👍😁🇦🇺

@sumosprojects 2 года назад

You can binge watch a cool channel called Sumo’s Projects as well if you want to 👀🙏😳🧐

@JesperMakes 2 года назад

@@sumosprojects I already have bingewatched that channel 😁 And be careful, channel owners typically don't like people who promotes themselves in the comments 😂😂

@interceptor7905 2 года назад

That would be good tip knackeeeers!!

@diyforknuckleheads 2 года назад

@@sumosprojects I'm on it Sumo 👍👍

@beautifulinstrumentals2866 2 года назад

Yeah man, let’s go cut some stuff. Like some cheese, ay? I like the jig, and I can’t even dance!! I’ve gotta make me one. You have inspired me. Thanks to ya!

@diyforknuckleheads 2 года назад

😂😂....you'll love it mate 👍

@davidguenther8170 2 года назад

I've been making these for a couple of decades. I use 1/4" plywood, though. I also use the same principle to make router jigs, marking each jig for the router and size bit.

@diyforknuckleheads 2 года назад

Yeah they're pretty popular David 👍 Thanks for watching mate 👍😁🇦🇺

@imacmill 11 месяцев назад

Ya, 1/4" ply is better, IMO. You don't lose as much cut depth, and the jig is much, much lighter. Note that being lighter can be detrimental in that the jig is more likely to slide out of position when cutting, but I always clamp it down (something I'd do even if the jig was 3/4" ply).

@talleysuehohlfeld3959 16 дней назад

Remember to tuck the “keep” part of the stick UNDER the jig, just hiding your mark. That way the saw’s kerf falls in the waste

@johnvodopija 2 года назад

Love the simplicity. Great project Knackers! Cheers 👍😎🇦🇺

@diyforknuckleheads 2 года назад

Doesn't get any easier John 👍 Thanks as always for watching mate 👍😁🇦🇺

@FixitFingers 2 года назад

This jig series is just awesome mate. The black ply and consistent design will bring a _look_ of professionalism to even the dodgiest workshop operation 😂😂

@diyforknuckleheads 2 года назад

😂😂...couldn't be any dodgier than mine mate 😁 Thanks for watching James 👍😁🇦🇺

@ChelseaPensioner-DJW 2 года назад

Not knowing where abouts in Aus you are Good Evening although it could be a Goodnight... anyway I used a piece of angle aluminium for my straight edge a lot lighter, but only a metre long, as a base I used a spare vinyl lam floorboard with rubber glass storing mat as an anti-slip, you know the type they use in pubs on the glass shelves. Great vid, and shall be using the joke on me mates grandkids. 😀 👍🏼

@diyforknuckleheads 2 года назад

Yeah good tip re the vinyl floorboard David. If l can get my hands on one l'll do it 👍 Hope you mates Grandkids like the joke 😂

@louislandi938 2 года назад

Hi Shane! Another typical project of yours. Something the average DIY’er can use and make without thousands of $$$$ worth of professional equipment. Enjoyed the ‘Dad joke’.

@diyforknuckleheads 2 года назад

Thanks Louis 👍😁

@danalaniz7314 2 года назад

This is absolutely great! So much better than anything I've see online. Clear, concise and really easy to understand. Thanks a million!

@diyforknuckleheads 2 года назад

No worries at all Dan! Glad you liked it mate and thanks for taking the time to watch. Cheers 👍😁🇦🇺

@woodfather 2 года назад

Nice one, a saw board like this was the very first jig this young Woodfather ever made! 😊

@diyforknuckleheads 2 года назад

Everyone has to have a saw board Mario.....especially noobs like me 👍😁 Thanks for watching mate 👍🇦🇺😁.....The Baggers had a good win on the weekend.....you must be getting a little excited / nervous 😬

@woodfather 2 года назад

@@diyforknuckleheads Super exvous! I mean, super nercited! I mean 🤪🤪🤪

@diyforknuckleheads 2 года назад

@@woodfather 😂...Go the Blues 👍😁

@TheRealBobTheBuilder 2 года назад

Wow I'm very early. First like and first comment. This is the kind of video I love! Tutorial videos about things to assist in the workshop are the best kind of video in my opinion. Great video

@diyforknuckleheads 2 года назад

Awesome! Well done Bob! Very quick mate👍👍👍 Glad you liked the vid too....appreciate you taking the time to watch. Cheers 👍😁🇦🇺

@TheRealBobTheBuilder 2 года назад

@@diyforknuckleheads Thanks! I'm only 13, but getting into the woodworking early and I'm loving it! 🇦🇺🇦🇺🇦🇺

@diyforknuckleheads 2 года назад

@@TheRealBobTheBuilder Good stuff mate! That's awesome....keep it up 👍😁🇦🇺

@wtabilltaw 2 года назад

Hi Shane Very entertaining as usual and an awesome addition to any workshop . I have one question mate , why did router the edge you intended to cut off 🤔 . Regards to Mrs and the boys . Bill in uk

@diyforknuckleheads 2 года назад

Cheers Bill! Mate, when I'm in the "Chamfer Zone" look out!....I'll chamfer everything....even if it doesn't need it 😂 .if you're standing still, you'll be chamfered 😂 You're right...it didn't need to be done 👍

@patrickmaloney6440 2 года назад

@@diyforknuckleheads I'm with you! I bloody love chamfering!

2 года назад

Hello my friend, Yes mate. I agree with you. The circular saw guide is handy and practical. Thank you for this useful information and video. all the best. see you buddy.

@diyforknuckleheads 2 года назад

Cheers Sahane....simple but effective! Thanks for watching mate 👍😁🇦🇺

2 года назад

@@diyforknuckleheads 👏👏👏

@deliaguzman1138 Год назад

Love that this is only two pieces of wood! Thanks, Uncle Knackers!

@diyforknuckleheads Год назад

No worries at all Delia and it works really well 👍😁🇦🇺

@davidmuresan1735 Месяц назад

Do you like my "Parallel Guided Power Saw?" seen on you tube. Do you wish to join me to manufacture it. On the video you may see some pyramids I cut with my saw, which cannot be easily cut with another saw. The manufacturing company does not want my saw, so we have to start our company to make it.

@DownUnderWoodWorks 2 года назад

Mate, that style of saw guide is timeless and every woodworker has either made one or should do. I keep seeing an image of a moth flying in a straight line now 🤣

@diyforknuckleheads 2 года назад

Hahahahhahaha....You'll be on the lookout now mate 😂 Thanks for watching 👍😁🇦🇺

@jasonwildman7979 9 месяцев назад

This is great, Thank you. However, can you please describe the part where you are preparing the area for sheet transfer: the jig/frame thing, looks like it’s supported by an additional piece on top and bottom sides, but I don’t see any clamps for keeping things still in that very quick edit. Thank you.

@jrwingking8721 Год назад

Love the jig, but how would you clamp it if you were cutting the edges off a narrower board like a 2x6?

@fattyfat-fat6639 11 месяцев назад

Hay🐴Mate!!! Nice jig. Your straight edge is not listed on your tuulz page. Whatz the brand and where yo get it?😊

@revvillanuevarevaving6849 6 месяцев назад

Is it possible to make an 8ft jig for rip cuts? Will there be flex in the middle during cuts considering clamps are 8ft apart?

@spacecoastz4026 6 месяцев назад

I started making a similar jig, but found that my depth of cut would be too small for anything other than plywood. Trying to achieve any depth with the saw results in the body of the saw rubbing on top of the jig. Its a great tool if your cuts are shallow.

@oOTBONE77Oo 5 месяцев назад

Hi.. an honest question here.. would changing the saw blade once the old one has died for a different manufacturer make any difference or are all saw blades the same thickness? Thanks

@Trek918 9 месяцев назад

Very nice, I'll have to make one. Do you have a video making the other circular saw jig, like a kreg saw jig?

@Dirt.carver Год назад

$150 for a sheet of formply now 🤦‍♂️ anyone got any cheaper solutions

@EindhovenVuurwerk 2 года назад

In comparrison with the jigs from Makita or Festtool, what is the added value? I think i missed that. Anyway it looks very neat and simple.

@diyforknuckleheads 2 года назад

Comes down to price mate and the fact that you get the satisfaction of making it yourself 👍 Thanks for watching

@EindhovenVuurwerk 2 года назад

@@diyforknuckleheads thanks for your answer i understand it now.

@ratofvengence Год назад

I'm making a mobile cabinet for my mitre saw, and was frustrated at my failure rate cutting accurately with my circular saw. Then I remembered this beastie you have in the vid here, and made that. It's made the WORLD of difference. Thanks Knackers :)

@diyforknuckleheads Год назад

Briliant! Glad it worked for you mate 👍😁🇦🇺

@dr0pb34r Год назад

Why do I always find the helpful videos AFTER I've stuffed something up lol Another great video

@diyforknuckleheads Год назад

Sounds very familiar D.B! 😂 Thanks for watching mate 👍😁🇦🇺

@martynbircher2623 2 года назад

Nice tip Shane a simple jig but will make cutting so much easier, keep up the fab work really enjoy the videos :)

@diyforknuckleheads 2 года назад

Cheers Martyn! Hope you had a good weekend mate 👍😁🇦🇺

@crazykittenvideos855 2 года назад

That really is a great tip Knackers! I have a pretty crappy old circular saw but I reckon with a jig like this it might get a whole new lease of life! Keep up the good work!! Bonus joke: when I’m around my Spanish speaking friends I often use the word Mucho…… It means a lot to them!

@diyforknuckleheads 2 года назад

Mucho hey...let me look that up....will it get me into trouble 😂 Thanks for watching mate and yes, your old saw will love it! Cheers 👍😁🇦🇺

@briancooper3732 2 года назад

Great jig. Just one thought - if you make sure your guide is straight both sides, you can use the second side for a router. Of course you then need to ensure you always use the same router and the same bit. Two jigs in one 👍

@diyforknuckleheads 2 года назад

Very true Brian and l know of blokes who do just that 👍 Thanks for watching 👍🇦🇺😁

@Mistrblank 9 месяцев назад

I find it a little funny you chamferred an edge you were going to cut away :)

@MikeWilliams-yp9kl 2 года назад

Nice video, BUT why not just use the piece you screwed on the other piece of wood ?

@DavidMarple-ee1mi Месяц назад

Hey mate, done my first straight edge today, actually 2! A 1.8, and a 1.2 jig and thanks to you and your guidance they turned out great. Thanks for your circlier saw tips. Helped a heap. I'm just a beginner on doing it the right way.

@diyforknuckleheads Месяц назад

Brilliant! Well done Michael 👍😁🇦🇺

@beanpotatoreviews184 2 месяца назад

Was the original jig from a 3/4 4x8?

@waynevowell9732 2 года назад

I already have one similar to this and I'm in the process of making the SC1000. I figure that should cover me for making straight circular saw cuts! Always enjoy your videos!

@diyforknuckleheads 2 года назад

I reckon you're fully covered Wayne 😂 Thanks for watching mate 👍😁🇦🇺

@kylieb4836 2 месяца назад

Bit late to the party….. 😂 I have a few sheets of the black formply, but I’ve read that wood glue won’t bond to it - can you give advice on this one please? I’m hoping I can use the wood glue for a project.

@diyforknuckleheads 2 месяца назад

That is correct Kylie....glue won't stick to it. I just do it out of habit 😂

@scottydo2103 2 года назад

Hi UK (Uncle Knackers), great video! Loved the joke...and the kids did too( NOT!) and neither did the wife. But, like you, I'm an old dad and I LOVE telling them your jokes. Cheers, Scotty (Norway)

@diyforknuckleheads 2 года назад

😂😂....good stuff Scotty. Thanks for watching mate 👍😁🇦🇺

@johnbarney5787 3 месяца назад

Keeping with insect themed dad jokes: What do you call a fly with no wings? " A WALK."

@diyforknuckleheads 3 месяца назад

😂😂.....touche

@mikeking7470 Год назад

How well does white glue (I assume it's PVA) hold on the laminate? Formply is made so nothing will stick! I made my jig from 3/8-inch MDF (9mm?) and also put a hole in one end to hang it by. I also wrote on the jig which saw I used and which type of blade for the straight through cut. I've been using mine for a while now and it's a treat to use.

@diyforknuckleheads Год назад

The glue was more out of habit than anything 😊 Thanks for watching 👍

@Sinceretony 4 месяца назад

🤣🤣🤣 it flys in a straight line again love the jokes lmfao keep posting vids brother much love from Texas 🫡

@diyforknuckleheads 4 месяца назад

😂....Cheers mate 👍😁

@henryvaldillez6785 Год назад

I made mine years ago but I used 1/4” thick melamine- one 8’ and one 3.’5” screwed it together with Nickel plated drawer screw’s then grind the tip’s of the screws off plus I staggered my screws every 6-8”

@diyforknuckleheads Год назад

👍👍

@DeathWatchWorks 8 месяцев назад

Damn, I wish i would have watched this video before last night. I had to cut some plywood for my worktable I'm building and I did a crap job with the cuts.. Now i have to try to hide those lines with wood filler or something. Thanks for the tips for next time.

@diyforknuckleheads 8 месяцев назад

No worries at all mate 👍

@brianpatmore8418 2 года назад

Dear Tio Knackers, If you paint the exposed edges of the jig the appropriate shade of green, you could get a Festool feeling !! 👍👀🤣😂

@diyforknuckleheads 2 года назад

😂😂😂.....now you're talkin' Brian.....maybe put a Festool price to it 🤔

@harrycaul2494 2 года назад

Hi from UK, loving the channel. I see you use a lot of 'formply' which isn't that easy to find off the shelf in the big DIY stores in UK, and where it is found . it's expensive. Any UK viewers of the channel found the best/cheapest place to buy it? Thanks

@diyforknuckleheads 2 года назад

Thanks Harry 👍 I have heard it;'s expensive over there which is a shame. It's quite affordable over here which is why you'll see a lot of Aussie RU-vidrs using it plus it's awesome to work with and it looks great. Hope someone on here from the UK can point you in the right direction 👍😁🇦🇺

@smalltown89 Год назад

This is an unbelievably hard product to find. I have called every lumber yard within an hour of me and nobody carries this kind of "formply." Any tips on an alternative, or possibly getting regular plywood and painting it with something?

@diyforknuckleheads Год назад

Over here in Australia it is very common and easy to obtain. You can like you say, buy a regular sheet of ply and paint it black if you like the way mine looks. You can also use MDF and paint it black if you like 👍

@lechatbotte. 2 года назад

And bam just like that everyone’s day is made better!! Thanks Uncle Knackers. Moth 💨 lol. That black ply, is the equivalent to melamine? With the price of lumber requiring one to mortgage their house for a project I want to get the right stuff. This need to make even more than the saw horses.

@diyforknuckleheads 2 года назад

Thanks Mate! No it's not the same as Melamine. It's actually plywood with a protective coating 👍

@tfwoodcraft 2 года назад

Made one of these with some scraps i had laying around...except i forgot to make the lower part wide enough to clamp. Now I have basically your model except if it was flush with the back of the upper guard board and my motor of my saw hits the clamps when I get to the end of the cut...gonna brain storm some fixes. I think I'll remove some of the bottom material underneath, add a longer piece in its place and screw and countersink it on so I can have some little "tabs" to clamp on. Thanks for the inspiration though! basically the same as a track saw and didn't have to spend like $600 to get one! Do you get that black covered plywood in 4x8sheets? everything looks nice when made from that stuff and i'm guessing the smooth surface is helpful as well!

@diyforknuckleheads 2 года назад

Mate you wouldn't be the only one who made that mistake.....hopefully you can get it sorted 👍 The Black Formply does come in 4 x 8 sheets and yes it does look very cool and the smooth surface is a bonus when making one of these jigs. Thanks for watching Trev 👍😁🇦🇺

@SoggyBiscuits1000 2 года назад

this is a good jig but what about an irish jig?

@diyforknuckleheads 2 года назад

😂...I'm working on it mate 😂

@ChelseaPensioner-DJW 2 года назад

Isn't that why Shane keeps always has a cap on... the Irish Jig has gone..😉😂

@petermiddo 2 года назад

Uncle Knackers, how are you doing your images? And how did you do your Router recess guide? Those'd be great great videos, old mate.

@diyforknuckleheads 2 года назад

G'day Peter. With the image transfer It's nothing to fancy. All l use is label paper that you buy from your local stationary store......you know, the A4 sheet of paper that is covered in labels that you peel off and stick to things like envelopes.....peel all those labels off and throw them in the bin. Once the labels have been removed you are left with a shiny surface and that is what we want to print on.....hope that makes sense ....l actually made a video on the process a few years back...Here's the Link to Image Transfer Video. The instruction starts around the 5.40 mark in the video. Good Luck!! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--A-Un_X21lU.html......Good luck 👍😁🇦🇺

@klammbaer 2 года назад

I really love to view the vidoes, but as an german based european guy, I cant understand most of the "Dad Jokes" Sad!!:(

@diyforknuckleheads 2 года назад

That's probably a blessing in disguise mate 😂 Thanks for watching 👍😁🇦🇺

@rodsnerd5176 Год назад

i did something similar, but lazy. same premise of making the guide only i don't make one. for cuts under 4ft i use a 4ft level and clamp it down. works like a champ.

@diyforknuckleheads Год назад

👍👍

@krickette5569 2 года назад

Excellent tootorial... (see what I did there?) Here in the Ozark Mountains a 'toot' is another word for fart. Maybe they use it in Australia as well?

@diyforknuckleheads 2 года назад

😂....Yes we do Krikette and thanks as always for watching 👍😁🇦🇺

@bradpittbutcooler5462 2 года назад

That formply looks expensive! How much per sheet 8/4in Australia?

@diyforknuckleheads 2 года назад

It's actually pretty reasonable over here mate. 96 Aussie dollars for an 8' x 4', 17mm thick sheet 👍

@johnherian781 5 месяцев назад

I made one side for straight rip cuts and the other for 45 degree cuts for making French cleats.

@diyforknuckleheads 5 месяцев назад

👍👍

@raphaelruf4861 2 года назад

What kind of glue are you using here? Because i figure normal wood glue will not stick to black formply.

@diyforknuckleheads 2 года назад

Mate, l'm using an exterior grade glue that has a little bit of holding power but l wouldn't rely on it which is why l screwed the strip down 👍

@col0342 4 месяца назад

Bonus point: physical exercise when moving/positioning it. Take that, Ozito, with your flimsy two-pieces track :large-grin: Features still missing: - what to do if the cut is longer than the guide - can't put clamps at both ends - cutting at straight angle from/on an edge Maybe they could fit in a future vid (even with extra basic tools, like the couple for optionals)

@moonrocks21m42 2 года назад

Anyone know what the yellow thingy is on the drill at 3.51? Not seen that before 🤷🏻‍♀

@diyforknuckleheads 2 года назад

Mate, its a countersinking drill bitl from Macsim called a Clever Tool 👍

@robertgrlic6505 Год назад

Great video! What about the saw's kerf? If I need a 2" strip of wood? Thanks

@diyforknuckleheads Год назад

Thanks Robert! Just set the guide the width of the kerf, back from your mark. Cheers mate 👍😁🇦🇺

@iainbain5586 2 года назад

You aren't located in the south west are ya, knackers? If not you've got a doppelganger down ere 😅

@diyforknuckleheads 2 года назад

Hahahahhaha.....gotta love Kloppy mate 👍😁🇦🇺

@thomashartman4390 Год назад

I like this

@diyforknuckleheads Год назад

👍😁....Thanks Thomas!

@ShootingWings Год назад

Hello, love the guide, What size and type router bit you used? Thank you

@diyforknuckleheads Год назад

G'day mate...sorry about the late reply. Here is the link to the bit that l used to route the recess of the logo. Cheers 👍 amzn.to/3gttq7p

@anthonydean1919 10 месяцев назад

Did I just see you in Ferry the series

@danne657 5 месяцев назад

This i gotta try, looks great! does this work to do a 45 degree angle. does the same consept work?

@diyforknuckleheads 5 месяцев назад

Thanks mate and yes it does just as long as you line the marks up 👍

@clsbrasil2 10 месяцев назад

I have built almost the same jig. It is very efficient but is more adequated to large pieces. Once you have to cut smaller things I would suggest other models. The clamp part can be smaller but the heavier thia jig is, the better.

@bradleytuckwell4881 2 года назад

Beautiful jig but you said a saw and a drill is all you need if I’m not mistaken I saw a router and a jig saw lol

@diyforknuckleheads 2 года назад

Hahahahha....very true Brad but l think l mentioned in the vid that those things were optional 🤔 Thanks for watching mate 👍😁🇦🇺

@sumosprojects 2 года назад

Gotta love a good homemade jig from formply mate, it’s the Aussie woodworkers holy grail & milk & honey. Ps 3/10 for dad joke 🙃😣😁😁😁😁

@diyforknuckleheads 2 года назад

Can't beat the stuff mate....love it 👍 Gotta say, a 3 is better than a 2 😂 Thanks for watching mate 👍😁🇦🇺🍺

@jaydenheidtmann7811 2 года назад

With your formply are you using 2nds or are you using structural

@diyforknuckleheads 2 года назад

G'day Jayden....structural mate 👍

@9catlover Год назад

Thank you for making everything so simple and easy for a novice girl pallet wood diyer

@martinvanderhoek4363 2 года назад

Forgot to ask. Do you have a jig or in mind for the long cuts ie 8’.?

@diyforknuckleheads 2 года назад

For those longer rips, you need to make the jig out a longer sheet. Thanks for watching Martin 👍

@sawdustandsurvival 2 года назад

Another great video there! I'd love to use that coated plywood you use. I'm not sure how much it costs you, but an 8x4 sheet in the UK is about £100, so around 175 Australian Dollars. So expensive. Is it cheaper over there?

@diyforknuckleheads 2 года назад

G'day Andy....it's actually not to bad over here. An 8 x 4 sheet will set you back around 90 Aussie dollars 👍 Thanks as always for watching mate 👍😁🇦🇺

@watchman1969 2 года назад

cheap saw alert: this guide only works if the lateral of the base is parallel to the blade

@diyforknuckleheads 2 года назад

Good point mate and l alert to the perils of a cheaper saw in my upcoming Circular Saw Masterclass 👍👍

@djmini2numpty141 2 года назад

where you been ? welcome back.

@diyforknuckleheads 2 года назад

Been busy mate 👍 Thanks for watching mate 👍😁🇦🇺

@AleksandrFedot 2 года назад

Как всегда-полезное и позитивное видео. Спасибо 👌👍

@diyforknuckleheads 2 года назад

Спасибо большое 👍 Рада, что понравилось 👍😁🇦🇺

@Fusilier0 2 года назад

Do you have a video / explanation how you make your appliqué labels? In though I saw a how to video but I just cannot find it again.

@diyforknuckleheads 2 года назад

G'day Marcel....It's nothing fancy, all l use is label paper that you buy from your local stationary store......you know, the A4 sheet of paper that is covered in labels that you peel off and stick to things like envelopes.....peel all those labels off and throw them in the bin. Once the labels have been removed you are left with a shiny surface and that is what we want to print on.....hope that makes sense ....l actually made a video on the process a few years back...Here's the Link to Image Transfer Video. The instruction starts around the 5.40 mark in the video. Good Luck!! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--A-Un_X21lU.html......Good luck 👍😁🇦🇺

@Fusilier0 2 года назад

@@diyforknuckleheads Thanks, again, from Canada

@MFunkibut 2 года назад

Will NOT work with certain Craftsman circular saws! The left hand edge has a rivet that sticks out which makes the blade not 90 degrees when placed against the factory edge.

@diyforknuckleheads 2 года назад

That's a shame William.....thanks for the heads up 👍

@MFunkibut 2 года назад

@@diyforknuckleheads My saw is OLD - hopefully this won't be a problem for too many DIYers :)

@nisancashi2241 2 года назад

i like it I'm gonna try to make one..but I do have accu cut guide

@diyforknuckleheads 2 года назад

Give it a crack mate 👍😁🇦🇺

@msmith6422 2 года назад

Whats the basket collar thing on yer drill Uncle?

@diyforknuckleheads 2 года назад

It's a countersinking drill bit made by Macsim and is called a Clever Tool 👍👍

@RayoBeatz Год назад

do you sell these?

@jeffmastin 2 года назад

Love your videos and the jokes, but I don’t get the moth one

@diyforknuckleheads 2 года назад

OK Jeff...when the moth lets one go....he expels a littlest of air which makes him fly in a straight line ...😁

@ijall13 2 года назад

Love ur video man, btw u got Kloop's looks

@diyforknuckleheads 2 года назад

😂.....it has been said mate 😁 Thanks for watching 👍😁🇦🇺

@mickcawley4797 2 года назад

Quality video as usual Knackers. Just as well You're great at Woodwork, because judging by the Moth joke wildlife shows are not for you🤣🤣. Look forward to Your next clip.🇬🇧🇦🇺🇬🇧🇦🇺

@diyforknuckleheads 2 года назад

😂😂😂...Thanks Mick 👍👍

@gaweown Год назад

Thank you so much,i like this ideas,usefull and easy to implemented

@diyforknuckleheads Год назад

👍👍

@gaweown Год назад

@@diyforknuckleheads 🙏🙏🙏

@zubalea 10 месяцев назад

Great job as always. As you are making this jig I noticed, hanging on the wall behind you, the S.C 1000 from "How to Cut SQUARE Like a PRO!" video. I know the difference between them, but if you could only build one which one would you choose? or which one the you use the most often... Thank you

@diyforknuckleheads 10 месяцев назад

G'day Zubalea.....the one I use the most is the CSG1000. It cuts a full 1200mm / 4' sheet 👍😁

@njkay0033 11 месяцев назад

How about a non slip backing to take it up another notch?

@diyforknuckleheads 11 месяцев назад

Yep...that would work great 👍

@hawr0 2 года назад

Oy! Where did you buy that green looking depth stop for the drill? I've been looking for one of those for ages

@diyforknuckleheads 2 года назад

Mate, it's a countersinking drill bit from a company called Macsim. It's called a 'Clever Tool'. Cheers 👍

@hawr0 2 года назад

@@diyforknuckleheads awesome! Thanks alot! 👌

@BenHollist 2 года назад

HAHAHAHAHAHA An oldie but a godie gig mate, Love it, How was the DIY makers Catchup. Dissopointed I could not make it

@diyforknuckleheads 2 года назад

Cheers mate! The weekend was an absolute Rippa! You would have loved it 👍😁🇦🇺

@steveandulsky566 2 года назад

Hey, Uncle Knackers....it's good to see you again. You were sorely missed....like a really bad sore!! ( maybe you could use that as a dad joke!!) But seriously, mate, it's nice to know you're still making the videos. Welcome back.

@diyforknuckleheads 2 года назад

👍😁....Cheers Steve!

@cantfreezethecheese 8 месяцев назад

Great video! Question- what other reasons would cause the cut to be wobbly still?

@diyforknuckleheads 8 месяцев назад

Thanks mate 👍 It really comes down to skill level 👍😁🇦🇺

@cantfreezethecheese 8 месяцев назад

@@diyforknuckleheads my cuts seem to start off good and then I get about 1/16-1/8” variation.

@chriswilliams5498 11 месяцев назад

Just made up a couple of jigs like this and !!!!!!!!!!! Brilliant . And now have perfect straight edges

@diyforknuckleheads 11 месяцев назад

Awesome! Well done Chris

@SandiRose2008 2 года назад

I'm a bit worried. What does it say about me that I had to listen to the Dad Joke about 4 times before I understood it?!?! Is it dementia or intelligence? 🙄 LOL Ok, Let's get serious. I really like this jig. It looks easy to make, easy to handle, and easy to use. My kind of jig! As always Shane, loved the video! Thank you! Have a good week!! 💛

@diyforknuckleheads 2 года назад

Sandi...Dementia 😂....Only kiddin'....must be intelligence 👍😁 Glad you liked the jig and thanks for watching 👍😁🇦🇺

@SandiRose2008 2 года назад

@@diyforknuckleheads Somehow, I knew you'd say that! 🤣🤣🤣

@diyforknuckleheads 2 года назад

@@SandiRose2008 😂

@donkink3114 2 года назад

Is it sad that I wish I had an uncle like you? That my dad and all the uncles I was in contact with were substance abusers and I never learned this cool diy stuff? Uncle Knackers is imo my only real uncle as he teaches me and all my friends about the fun creative hobby in a way that is very endearing. Thanks Uncle K👍

@diyforknuckleheads 2 года назад

No worries at all Don! Glad l could help in some way mate 👍 Thanks for watching 👍😁🇦🇺

@henryskinner1092 Год назад

I believe you are to some of us a relative. I adopted you.

@barryroberts6470 2 года назад

Who needs one of those fancy straight edge cutters that cost a fortune, when you can make your own nice budget one that does the same thing. Well done mate enjoy your cuppa, Stay Safe, Barry (ENG)

@diyforknuckleheads 2 года назад

Cheers Barry....my sentiments exactly 👍😁🇦🇺

@jamalharrison6993 10 месяцев назад

Dude… absolutely fantastic. I’m so doing this when I get back from vacation.

@diyforknuckleheads 10 месяцев назад

Good luck with it Jamal!.....you'll love it 👍😁🇦🇺

@hoot2416 Год назад

I'm building my first workbench. This saw guide will be the first thing I make. 👍👍

@diyforknuckleheads Год назад

You'll love it MH! Good luck with the workbench 👍😁🇦🇺

@coppermine64 2 года назад

Fantastic. Just bought myself a makita cordless circular saw. Will definitely be making this. Great stuff Shane. Top bloke.

@diyforknuckleheads 2 года назад

👍😁...Cheers mate! Good luck with the new Makita....it's a great saw 👍😁🇦🇺

@tvelektron 2 года назад

Very nice. I am thinking of a "tiny" version for my Makita HS301. As this small saw is a bit limited in depth of cut i will try to make it much thinner, perhalps acrylic sheet as a base material...

@diyforknuckleheads 2 года назад

A good base material which is strong, yet thin is a laminated floor board and they are nice and straight as well 👍 Thanks for watching 👍😁🇦🇺

@chrislee3414 4 месяца назад

My first thought was, "You're using a straight edge to make a straight edge?" Until I realized that the jig makes it a whole lot easier to line up the cut.

@diyforknuckleheads 4 месяца назад

Spot on mate....it works really well 👍

@alandust2188 2 года назад

Seriously, my father used this jig 60 years ago but used thinner stock so you could make a deeper cut and it was also 96 inches long and certainly was lighter.

@diyforknuckleheads 2 года назад

They've been around for a long time Alan. Using a length of laminated flooring is also a great option 👍