Watch as we install our Monotube Fork Cartridge Kit on a Harley-Davidson Touring Model (bagger) bike. Fits: 1984-1996, 1997 and Up Harley-Davidson Touring Models On Website www.progressive... Download Instructions www.progressive...
I think this video needs to be updated but it does give you a good understanding of what you’re going to be in for.The preload spacers are different now.
I think you should do a video showing a complete tear done and rebuild of the fork and then installing the monotube. I'm sure anyone doing this would want to rebuild and replace worn parts and seals.
I'm doing this on a 01 Electra Glide. Do I use the original bottom cup? I can't get the 6mm Allen it to torque!! Just wants to spin inside!! Holding everything as should, but spinning inside!! Thx
Hi. I have a Sportster seventy-two 2015 with only 5000 miles. The front fork makes a clankc in extension and stains the bars a bit. I want to install these monotube. Should I change the seals or how these monotubes work with very little oil is not necessary ?. Thank you!
Just like your directions. not the best . edited out to many steps in the video, I don't need to see the bike going down on the lift. Need to do better.
Be Advised!!! Just spoke with Progressives Technical Assistance. Engineering Dept. Recommends no more then Two (2) Pre-load Clips. 714 523 8700 They only packaged Four (4) clips in my kit. Probable why. And this is a Progressive instruction Video.
@@davidwilley4524 i bought the monotube that can be lowered 1-2inch. If I dont what to lower it n want the standard height only.. Can I still use this kit?
Depends on make and model. On HD Touring the Service Manual calls for/requires Fork Oil change and service at 50,000 miles. Then at every 20k miles after that (this is NOT stated, but experience tells that this is good advice and practice. See: "MAINTENANCE SCHEDULE near front of Service Manual. For the (ex) "2010 Touring Service: Maintenance" it's in SECTION 1.5 pp 1-11 thru 1-14
