Тёмный

Project 0133 | Making a motorbike from scratch with a fast coupling KTM engine 

Make it Extreme
Подписаться 2 млн
Просмотров 6 млн
50% 1

Finally the long anticipated motorcycle is here! After our previous project, ‘The fast coupling KTM engine’, it would not be a surprise that our next structure would be a vehicle.
► Get the plan: / makeitextreme
► Linktree: linktr.ee/makeitextreme
►All details about the video: bit.ly/3zrHk47
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3IgWU4G
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.com/shop/makeitext...
-----------------------------------------------------------------------------
Click here to Subscribe: bit.ly/MakeitExtreme
Second Channel: bit.ly/MakeitExtremeShorts
Facebook: bit.ly/Makeitextreme
Instagram: bit.ly/makeitextreme
TikTok: / makeitextremeshorts
Welding Machines:
Mig: bit.ly/Rallymig
Tig: bit.ly/PITIG
►Special Thanks to our new Patrons:
TOP (Jakob Keller)
Arno Mott, Devin Blitzer, DA_Johan_Bishop, John E Baylor,
The Scientific Duo, Bruce Mansfield, Christian Díaz Armstrong,
Horacio Mejía, Felipe Carranza
Music from Artlist: bit.ly/MIEArtlist
(Subscribe now and get an extra 2 months on your subscription)
#makeitextreme #makeitextremeshorts

Наука

Опубликовано:

 

22 июл 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 1,1 тыс.   
@ifyousayso9906
@ifyousayso9906 Год назад
As a welder absolutely love the fabrication from the ground up. Hat's off on a great build. Instantly made me want to head to the shop!
@monikalewandowska8344
@monikalewandowska8344 Год назад
Elkrka
@ifyousayso9906
@ifyousayso9906 Год назад
@@monikalewandowska8344 Croatia?
@ironandwoodman
@ironandwoodman Год назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4GtUYVTfnlQ.html
@md.ebrahimsunnyebrahim8987
@md.ebrahimsunnyebrahim8987 Год назад
ok
@nyurechikatula9698
@nyurechikatula9698 Год назад
I need one how mach is it to Zambia
@jasonhull5712
@jasonhull5712 Год назад
This guy is why RU-vid was created. Crazy fabrication skills as well as editing skills! I can't stop watching!! I don't even care what is being built, I just love the whole fab stuff. Well done my friend. Very well done.
@AmyraLegaspi-bx4ym
@AmyraLegaspi-bx4ym 8 месяцев назад
@gsants1882
@gsants1882 3 месяца назад
Calidad total es lo que me gustado en este proceso soy un aprendíz muchas gracias
@poopjeans1135
@poopjeans1135 20 дней назад
If you can't stop watching, you have NO self-control and that's a bigger issue than watching youtube videos.
@MakeitExtreme
@MakeitExtreme Год назад
What's up guys! We want to Thank you everyone for the support. Hope you enjoy the video!:)
@moenkhan4773
@moenkhan4773 Год назад
েৃলক
@TECHNOCRAFT1108
@TECHNOCRAFT1108 Год назад
I want to buy this what is this price
@sowseng
@sowseng Год назад
can you make a wheelchair?
@parthkachhadiya4720
@parthkachhadiya4720 Год назад
what's the top speed and engine specs?
@zashi_confidence.9226
@zashi_confidence.9226 Год назад
Sell me that bike
@MariniProduction2021
@MariniProduction2021 Год назад
The world of craftsmanship and industry are beautiful .... I make metal objects for furniture in my free time, they are hard work but they bring enormous satisfaction. I hope to grow on this platform, like everyone else. Greetings and good luck 😁😁😁😁
@Alberto-oe6wj
@Alberto-oe6wj Год назад
😍
@frankierzucekjr
@frankierzucekjr Год назад
I subscribed to ya bud.
@MariniProduction2021
@MariniProduction2021 Год назад
@@frankierzucekjr thanks for support 💪
@smyousuf1504
@smyousuf1504 Год назад
O
@Thefreakyfreek
@Thefreakyfreek Год назад
A day whitout creation is a day wasted in my opinion
@nicholasalbarado4810
@nicholasalbarado4810 Год назад
Your skills are sick man!! Love the videos and the lack of talking and explaining every single thing is a blessing
@curttaylor7841
@curttaylor7841 Год назад
Yes I say just this all the time “Less talk more work”
@nicholasalbarado4810
@nicholasalbarado4810 Год назад
What’s crazy is I can’t listen for shit. I have to see to learn and this guy is one of the best for teaching. He evens hides his face and that is just a lil bonus
@absaljauhal9843
@absaljauhal9843 Год назад
4444r
@KeepSycklids
@KeepSycklids Год назад
Actually i kinda wantes to know what was happening some talking and explaining would have been nice... cuz thats was the whole reason i picked the video .. was dor educational reasons
@nicholasalbarado4810
@nicholasalbarado4810 Год назад
Maybe these vids ain’t for u if you need the words my friend. Never have I heard him speak. I feel like his work speaks a thousand words.
@iainhetherington4608
@iainhetherington4608 Год назад
Gives me a real insight in to what bike engineers have to do to squeeze everything on to a frame ,very well done. Cheers from Aus
@ironandwoodman
@ironandwoodman Год назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4GtUYVTfnlQ.html
@FrustratedBaboon
@FrustratedBaboon 24 дня назад
Engineers? Do you mean imagination?
@anggaputra9488
@anggaputra9488 Год назад
The content you've been waiting for is finally uploaded 🤘
@nevillesmith9795
@nevillesmith9795 Год назад
They say a man is as good as his tool are, but your tools and adaptions you make to your existing tools/machines and the things you fabricate are a reflection of what a genius you are. I am in awe of your talent and skills. You have my respect👍👌
@ollikarisalmi1731
@ollikarisalmi1731 Год назад
Must be first time I see someone in youtube, using thread tap correctly on drillpress 😄 Very nice fabrication work 👌
@jasondk5127
@jasondk5127 Год назад
Not everything needs TIG welding. This channel really has come a long way since project 001! Great job on all your projects and building a great RU-vid channel!
@colbytyree2592
@colbytyree2592 Год назад
You are one of the most amazingly talented fabricators that I have ever seen
@cali8221
@cali8221 Год назад
Dnt forget big D and Johnny and Steve Darnell..And their are plenty more
@howardhughes6212
@howardhughes6212 Год назад
You need to get out more. I work in manufacturing and this is amateur shit
@junaalbafaraj9585
@junaalbafaraj9585 Год назад
true. i like the way how he make something to be extreem..
@reynierespino6859
@reynierespino6859 Год назад
@@cali8221 Fgi*f**fur - ffi-fgi*gfi*g*i4**gg*iffff*igf*f-*igg*gffif*guff *f*g
@reynierespino6859
@reynierespino6859 Год назад
*f
@ynosrage8402
@ynosrage8402 Год назад
This was such a cinematic experience 😍
@malibu188
@malibu188 Год назад
A first class welder and machinist always make things look easy. Great to see the impressive results.
@markkelly5941
@markkelly5941 Год назад
Genuinely impressed by your skills & abilities 👍🏽👍🏽
@johnvonmartin7501
@johnvonmartin7501 Год назад
Being a builder and a Welder that was craftsmanship at its finest. Salute to your hardwork
@ItzGlitchx
@ItzGlitchx Год назад
some of these shots are high tier movie quality, definitely earned my subscription
@sup3rbird
@sup3rbird Год назад
Once again a lot of seriously good fabrication resulting in a barely rideable death trap. You've done it again guys!
@Argosh
@Argosh Год назад
It's like watching a car crash that has been lovingly arranged for maximum carnage. I can't stop watching.
@SekAustria
@SekAustria Год назад
Wow! thats awesome!!
@MakeitExtreme
@MakeitExtreme Год назад
Thank you!
@ironandwoodman
@ironandwoodman Год назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4GtUYVTfnlQ.html
@vivekart04
@vivekart04 4 часа назад
I have watched the video four times. I love this bike♥️
@mrbig9435
@mrbig9435 Год назад
Уже с самого начала видно, что мужик знает толк. Очень круто, очень. Очень крутая подача, съёмка, работа. Мне очень нравится, что он собирает все как конструктор Лего, как буд то он разобрал, а потом по мануала собирает в обратном порядке, слаженно, без ошибок, круто И музыка супер , особенно вначале
@__I_G_O_R__
@__I_G_O_R__ Год назад
Просчёты инженерные присутствуют, но как для первого прототипа очень круто. Золотые руки.
@dukie1616
@dukie1616 Год назад
Blown away👏 Absolutely amazing artist and engineer. He has more talent in one fingernail than I have in my entire life. Curious though, why that back tyre, possibly for the looks perhaps. That beautiful build needs a proper motorcycle tyre to extract the best handling.
@ironandwoodman
@ironandwoodman Год назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4GtUYVTfnlQ.html
@officecrazy7
@officecrazy7 Год назад
As usual. A feast for the eyes. Excellent work all around.
@grahamharder6511
@grahamharder6511 Год назад
The video is excellent. The music, the camera shots, the end product it all flows. A ton of work and looks great
@MakeitExtreme
@MakeitExtreme Год назад
Thank you! :)
@paulkelly1702
@paulkelly1702 Год назад
I look forward to each of your videos. What talent!
@prodigalson2670
@prodigalson2670 Год назад
Brother, this is masterpiece from your fabricating and machining skills to filming, video editing and production. I was entertained the whole time. This will pop in tens of millions of views.
@tamanh6554
@tamanh6554 Год назад
566
@tamanh6554
@tamanh6554 Год назад
6
@tamanh6554
@tamanh6554 Год назад
214
@mr..luckyyyyy
@mr..luckyyyyy Год назад
4
@cgsmith6986
@cgsmith6986 Год назад
Ùììììì
@sergeypro-ov7091
@sergeypro-ov7091 Год назад
Ооочень круто!Как всегда!Отличный канал с отличными идеями и их реализациями!👍🤝
@MakeitExtreme
@MakeitExtreme Год назад
Thank you! :)
@Groot_G
@Groot_G 6 дней назад
You are an absolute wizard!
@srinivasv1206
@srinivasv1206 Год назад
Awesome build and great fab skills!! Love it! Slow motion while doing threading on a lathe machine would have been so satisfying!
@life_behind_bars
@life_behind_bars Год назад
Your skills absolutely amaze me with every video you put out!
@MakeitExtreme
@MakeitExtreme Год назад
Thank you! :)
@calvinmico3287
@calvinmico3287 Год назад
Love from Rwanda
@RumpusTime89
@RumpusTime89 Год назад
Your videos are amazing and really motivating for aspiring builders. Was there ever a time where you built bikes without the fancy machinery? I’m wondering if you have any tricks for pressing bearings without a hydraulic press
@colinsnyder3082
@colinsnyder3082 Год назад
Best maker channel ever! Hands down!
@johnblaze5553
@johnblaze5553 Год назад
You're an artist with engineering and fabrication skills. Impressive
@WorkshopFromScratch
@WorkshopFromScratch Год назад
It looks great and this KTM engine🤩 Amazing job 😁
@brunolindner8185
@brunolindner8185 Год назад
Mais um dos projetos mais que especiais! Parabéns!!! Um grande abraço de fã seu! Você é um Gênio!
@ironandwoodman
@ironandwoodman Год назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4GtUYVTfnlQ.html
@randyellis7353
@randyellis7353 Год назад
This guy makes it look like it’s so easy I could do it great job great video thank you
@Vtec24
@Vtec24 Год назад
I’ve seen so many bad diy craft videos that it’s refreshing to see someone who can properly operate this machinery
@waynebrazeau855
@waynebrazeau855 Год назад
Awesome talent, great to re cycle metals, keep up great job!!
@ironandwoodman
@ironandwoodman Год назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4GtUYVTfnlQ.html
@jmd4629
@jmd4629 Год назад
Very cool!!!! 10 out of 10!
@junaalbafaraj9585
@junaalbafaraj9585 Год назад
this what i call Extremely genius next lv mechanic and engineering skills...👍🏻👍🏻❤️
@retep825
@retep825 2 месяца назад
That's a piece of genuine craftmanship, AWESOME!
@frankierzucekjr
@frankierzucekjr Год назад
Freakin awesome. You're one talented guy, I wish I had your skill and knowledge. I really like watching your channel and what you come up with. This reminds me of the show Monster Garage. Awesome job buddy
@MakeitExtreme
@MakeitExtreme Год назад
Thank you my friend! :)
@frankierzucekjr
@frankierzucekjr Год назад
@@MakeitExtreme no problem buddy. Thanks for the entertainment. I'm a carpenter by trade, but I really want to learn metal work like this. You make it look so easy hahah. Take care bud and be safe
@frankierzucekjr
@frankierzucekjr Год назад
@@MakeitExtreme hey bro block the scammer below me. I get em too. They're ridiculous
@VaskosArt
@VaskosArt Год назад
Looks really cool guys good work. 2 concerns we'll 3 actually having the exhaust so close to the seat might burn you, the gas tank is a bit to small, and the back tire is ment for off road want to see some of that! :) Other than those I want to say you guys are inspiring me to quit job and start fabricating business! Great craftsmen! Looking forward to seeing more.
@alpacino7401
@alpacino7401 2 месяца назад
The composition of what you hear, see and create is fantastic
@JWILKO2107
@JWILKO2107 Год назад
My only issue with this is the size of the tube you used for the swing arm I’d suggest using bigger
@OutlawCRi
@OutlawCRi Год назад
yup, id reinforce it with some vertical supports between both parts of the arm.
@HvV8446
@HvV8446 Год назад
@@OutlawCRi or make a proper one from rectangular tubes. Current version is way to slim. Needs to be beefier. A few hard bump and it’ll bend a little each time.
@Joern8910
@Joern8910 Год назад
@@OutlawCRi yes, a truss structure between both pipes wouldn't add much weight but a lot of stiffness and would still look good. But a general rule of thumb for me is, when I'm building things that could hurt me or someone else I would always simulate them in FEM before with enough of a safety margin 😄
@erniegroocock4354
@erniegroocock4354 Год назад
Then build it yourself
@JWILKO2107
@JWILKO2107 Год назад
@@erniegroocock4354 bro stfu we’re all just giving constructive feedback to help the guy out it’s not like we’re dishing out hate
@luckyedwards4870
@luckyedwards4870 Год назад
All I gotta say is, "mega" impressive, and pretty damn cool. 👍👍👍
@MakeitExtreme
@MakeitExtreme Год назад
Thank you! :)
@gauravbele6209
@gauravbele6209 Год назад
This is what iron man said a true craftsman
@richk320
@richk320 Год назад
Great project.Amazing talent!
@TheMec1978
@TheMec1978 Год назад
Excelente video! Impresionante trabajo! Saludos desde Argentina 🇦🇷
@Dimitris_Kakarot
@Dimitris_Kakarot Год назад
Μαστορα δεν εχω λογια! Εξαιρετικο βιντεο,ωραια και καθαρα πλανα,το κανεις να φαινετε παιχνιδακι ενω σιγουρα εχει αρκετη δουλιτσα. Ευγε για το εργο σου,οι κατασκευες σου ειναι σε αλλο επιπεδο,συνεχισε αυτο που κανεις,το κανεις καλα και με μερακι!
@MakeitExtreme
@MakeitExtreme Год назад
Σε ευχαριστώ πολύ φίλε για τα καλά σου λόγια!
@kristiansandsmark2048
@kristiansandsmark2048 26 дней назад
If i'm going to fix my bike i usually buy my brake disks. You fabricate them. Amazing job and huge respect.😅
@nehemiasdasilva8817
@nehemiasdasilva8817 Год назад
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👍😉grande projetista,Engenheiro ,mecânico, enfim ,construir do zero uma moto e para poucos:um dos melhores que já vi👍😉abraço do Brasil,Deus te abençoe !!!
@caprojects6681
@caprojects6681 Год назад
Incredible work congratulations, I think you could improve the stability of the bike if you replace the rear wheel with a motorcycle wheel, the cross section profile of the wheel you use is square as it is a car, that goes back to the motorcycle more unstable in curves and when leaning, motorcycle wheels have a circular cross section to be able to lean better, you can also improve the support of the tire, which holds the rear wheel by making a closed support with a slider, this will prevent stretching the chain and the nuts loosen, the wheel can come off the support while you roll, it improves the capacity of the fuel tank, perhaps changing the shape would give you more capacity than using a cylinder
@bijoyboro6558
@bijoyboro6558 Год назад
Bi mp no p po
@vasilispieri5660
@vasilispieri5660 Год назад
Τεράστιος 💪
@MakeitExtreme
@MakeitExtreme Год назад
Ευχαριστώ φίλε μου! :)
@user-wz4jb4mb1x
@user-wz4jb4mb1x Год назад
Very impressive! I really admire your work.
@Mawntee
@Mawntee Год назад
Absolutely amazing video! One of the few 20+ minute videos where I didn't skip anything! That said, I was really tempted to because oh my god not every shot needs to have motion! The time lapses were amazing because they were a nice steady break. With every shot of you welding, or working on the frame being in motion it made it really difficult to tell what was actually happening. It also follows the same idea of "if everything is in bold, nothing is in bold" It would be really nice to sprinkle a couple tripod/static shots into the mix. Either way though, major shoutout to the film/edit and sound design of this! Good stuff!
@De4thInc4rn4te16
@De4thInc4rn4te16 Год назад
this 1000%!!!
@md.ebrahimsunnyebrahim8987
@md.ebrahimsunnyebrahim8987 Год назад
nice
@angermarte4640
@angermarte4640 Год назад
XD
@mouadbarih2771
@mouadbarih2771 Год назад
Love your work keep it up
@mr_biggy_bear
@mr_biggy_bear Год назад
Is anyone appreciating this guy robotic movements like I am?
@innovationtime20
@innovationtime20 Год назад
Amaaaaaazing 👏👏
@tuonglukim8973
@tuonglukim8973 Год назад
Somewhere there's a lawnmower racer wondering where one of his tires went.
@akizulseek663
@akizulseek663 Год назад
Usj
@tuonglukim8973
@tuonglukim8973 Год назад
@@akizulseek663 Well, ABC to you too brother. Have a good one.
@Phynix72
@Phynix72 Год назад
I love things like this. I made a hybrid tri-cart during college group project. I would like to see a few alterations. - 10% lower ride height, so rider won't tumble - Thigh support, for ride control. - Proper tyres, that accomodates it's look. - Electronics, you can diy lights & indicators.
@LifeOnWheels372
@LifeOnWheels372 11 месяцев назад
I watched with great pleasure the process of creating a new bike, it turned out very cool! 👍👍👍Masters with golden hands.🤘😎
@federicopalacios5931
@federicopalacios5931 Год назад
wish i could make one for myself, love the workmanship!
@mancavecustoms13
@mancavecustoms13 Год назад
Hey my guy, i appreciate your skills immensely, its beautiful to see all the fabrication work you make on the laid and the welding you do. I do however fail to understand why create such configuration with the ATV rear wheel. I think it made it way more complicated of a project as well as heavier and unrideable.
@roypatterson9910
@roypatterson9910 Год назад
I think he went for the rear ATV tire because that's just a style he was looking for, which I think turned out pretty good, if he wanted something different, then he would have done something different, but this is what he wanted. And why do you say is unridable? Clearly it's not unridable, because he rode it, or did I miss something. Lol.
@mancavecustoms13
@mancavecustoms13 Год назад
@@roypatterson9910 Hey my guy, honestly, I agree to you. I recently thought about this comment, as I try to not leave negativity anywhere, and, really, who the hell cares. The guy's a master and created something i won't be able to in 3 lifetimes. Who cares if i like it or not, nor does it matter.
@ssoouull7918
@ssoouull7918 Год назад
What's the top speed? Do you know?
@mysteriousstranger239
@mysteriousstranger239 Год назад
Great videos love the ideas you come up with
@russellcarter213
@russellcarter213 Год назад
Dude is one heck of a fabricator!
@soberanoyauh2999
@soberanoyauh2999 Год назад
Nossa camarada ficou chol seu projeto parabéns
@i_might_be_lying
@i_might_be_lying Год назад
Thanks for the vid! Great fast coupling engine idea! Probably the camera is moving too much - not sure about new filming style.
@dimitar4y
@dimitar4y Год назад
it's adhd tiktok style for people who have schizophrenia and need to constantly feel dizy and all characters on screen more frantically like it's a nightmare.
@i_might_be_lying
@i_might_be_lying Год назад
@@dimitar4y good thing I don't have TikTok
@dimitar4y
@dimitar4y Год назад
@@i_might_be_lying you should feel horrified that the entire new two generations are EXCLUSIVELY on that app. It's like I'm watching a horror movie from the 50's with fast forward motion.
@i_might_be_lying
@i_might_be_lying Год назад
@@dimitar4y I do feel horrified.. unfortunately..
@dimitar4y
@dimitar4y Год назад
@@i_might_be_lying Reminds me a bit of "Prodigy - Breathe" 's official video. Has that same vibe of excessive jumpcuts and crazy.
@tooljunkie555
@tooljunkie555 Год назад
That was awesome! "Make it extreme or don't make it at all!"
@Nine_883
@Nine_883 Год назад
You got mad skills dude. I’ll be looking for you when the apocalypse hits. Awesome video man. I couldn’t turn it off.
@EvelioPerez
@EvelioPerez Год назад
Nice, but I’d definitely think about routing the exhaust some other way. No way you will ever be able to ride that for more than a few minutes without getting unbearable. Great job putting it together. I always enjoy your videos.
@JWILKO2107
@JWILKO2107 Год назад
Some exhaust wrap wold probably do if rerouting wasn’t an option
@_KoLLIMaR_
@_KoLLIMaR_ Год назад
Отличный проект, сколько времени вы потратили на его создание? Мне очень интересно
@7_Cheshire_7
@7_Cheshire_7 Год назад
People are born artists and here is one of them. 🙃
@alex02101967
@alex02101967 Год назад
Amazing project as usual !!
@X7Dmitri
@X7Dmitri Год назад
Отличная работа! жаль что для такого ролика нужны месяцы кропотливого труда и переделок, всегда хочется все сделать с первого раза, будь здоров)
@Lix22.
@Lix22. Год назад
maybe you can add fenders on the front and rear with a futuristic concept to give a complete impression 😂
@bennettpolicy4704
@bennettpolicy4704 Год назад
Without a doubt the most complicated do it yourself project Ive ever seen, so many things cud go wrong.
@buckpotter3184
@buckpotter3184 Год назад
I thought I'd build some crazy stuff that's pretty cool looking
@ballerblocks
@ballerblocks Год назад
Wow. I am lost for words, what you did with the front fender Is .....just.....SEXY.
@Larry_Fishermannn
@Larry_Fishermannn Год назад
ergonomics have left the chat
@carlosdasilva9298
@carlosdasilva9298 6 дней назад
The nutcracker
@carloszetter
@carloszetter 4 месяца назад
The fabrication skills are amazing
@claudio6164
@claudio6164 Год назад
I loved the work, congratulations friend.
@UnstableAudioProductions
@UnstableAudioProductions Год назад
Everything was done awesome...except rear tire. Its worn out and the dimensions are a bit silly.
@Vachapankz
@Vachapankz Год назад
How can I not like it? Precision wow!
@AbdulRehman-py7yj
@AbdulRehman-py7yj Год назад
An Absolute masterpiece🔥🔥🔥
@ramonhamilton2802
@ramonhamilton2802 Год назад
I love seeing grinders with no guards being used makes feel like I'm not alone in the world.
@asipalacios8701
@asipalacios8701 Год назад
given the tools this guy can probably build a spaceship
@Wajahat_Murtaza
@Wajahat_Murtaza Год назад
The way he weld is just awesome 😍
@TJ-nr9cg
@TJ-nr9cg Год назад
Extremely talented. I'm jealous 😊
@tuanenchennel5934
@tuanenchennel5934 Год назад
I'm Vietnamese I love your creations
@user-er5wr6mk8u
@user-er5wr6mk8u 3 месяца назад
Brother you gangster mechanic 🙆🏻‍♂️🔥🔥
@dragonrider6875
@dragonrider6875 Год назад
You all keep me excited and enspired.
@monkeyzeetube
@monkeyzeetube Год назад
amazing work.. even a higher and wider handlebar will definitely work on that..
@prince-of-saiyan
@prince-of-saiyan Год назад
Another masterpiece 🔥🔥
@DanKoning777
@DanKoning777 Год назад
You think you need a dealership, Ebay, or Craigslist to own and ride a bike? See those parts over there? Sit and relax while I explain without words. Great job; I wish you had the freedom/means to things like this every day; I could watch your lathe work for hours. *God bless.*
@uncommonusername2507
@uncommonusername2507 Год назад
I am an engineering student and seeing you make a bike out of scrap totally blew my mind....huge respect bro
@raitafilms7982
@raitafilms7982 9 месяцев назад
I also want to make this type of bike in india can we work on it?
@chmakiss
@chmakiss Год назад
This motorcycle is a beast.!!! Well done guys. With the KTM engine should go like a rocket!!
@MakeitExtreme
@MakeitExtreme Год назад
Thank you man!
@peter360adventures9
@peter360adventures9 2 дня назад
Awesome build.
@Ignatiustechtips4786
@Ignatiustechtips4786 Год назад
i like how creative you are with the editing and beats... fire fire!!!
@rcl99tlr65
@rcl99tlr65 Год назад
After watching this I now feel motivated to go in the garage and attempt to change my own oil on my gen1 busa that I just bought lmao great video bro!
Далее
She Let Me Upgrade Her Surron!
17:06
Просмотров 2,9 млн
Honda GL650 Cafe Racer FULL BUILD TIMELAPSE
25:44
Просмотров 3,3 млн
How I Did This INSANE Trick 🤯📱🍬
00:10
Просмотров 2,7 млн
NAYEON "ABCD" M/V
03:42
Просмотров 20 млн
Restoration process of old Bike Sports bike
24:58
Просмотров 6 млн
Full Rebuild of Honda CB1300 in 18 Minutes: Time-lapse
17:59
BMW R100 RS Scrambler Full Build & Riding
16:37
Просмотров 1,9 млн
EXO CARS: The Underground Cheap Supercar Slayers
6:08
I Turn Pocket Bike Into Big Bike Engine
18:56
Просмотров 1,1 млн
I Build REAL V8 Engine | Assembly and RUN
14:56
Просмотров 881 тыс.
4000 hours to BUILD my DREAM CAR in 17 minutes
17:16
Дени против умной колонки😁
0:40
Holographic transparent flexible LED panel.
0:20
Просмотров 3,4 млн
TOP-18 ФИШЕК iOS 18
17:09
Просмотров 683 тыс.