Тёмный
No video :(

Project Scale RC Prerunner 2wd Toyota Hard Body Part 1 

Double Clutch Productions
Подписаться 12 тыс.
Просмотров 36 тыс.
50% 1

Wait till the end to see what no shock oil looks like lolz.
Hit that like and subscribe for more RC builds and content
Check out Scale Metal Supplies
scalemetalsupp...
/ @scalemetalsupplies
www.instagram....
store.rc4wd.com
RC4WD King Off-Road Scale Piggyback Shocks w/Faux Reservoir (100mm)
store.rc4wd.co...
RC4WD Extended Shock Ends for King Off-Road Shocks
store.rc4wd.co...
RC4WD 1987 Toyota XtraCab Hard Body Complete Set
store.rc4wd.co...
1/10 Scale Hard body RC prerunner build with full interior lights and long travel trailing arm setup. Running on 3s with a Hobbywing EZRun MAX10 Sensorless Brushless ESC/3652SL Motor Combo (5400kV) this thing should rip pretty good once we figure out pinion size. I rebuilt the Element RC Stealth X Gearbox with the zero over drive setup and on a 18t stock pinion with this motor setup its spicy, cracking wheelies spicy. Stay tuned as we build this thing and see if it even works.
I picked up a Element Enduro Gatekeeper rtr for super cheap with some Amain credits with the idea to build my first ladder frame railed hard body prerunner. I chose the gatekeeper because it comes stock with a true 4 link solid rear axle and has the ability to run the Element RC IFS Conversion Kit and my plan is to not use the front drives and run it 2wd with some custom long travel king shocks. We got a RC4wd 87 Toyota Extra Cab last year for my birthday and its been sitting in the box just waiting to be built. I might even test fit the 1/10 scale ford bronco hard body we have as its close in wheelbase compared to the Losi baja Rey that is a long batch. I got a plug and play brushless system that will be going in the element and I need to do some research and learn more about gearing and spurs and figure out something for the transmission. I came up with a cool solution that I wanted to share in this video so check out my attempt at building a 1/10 scale electric rc prerunner baja truck.
www.amazon.com...
www.amazon.com...
The Ford Raptor Losi Baja Rey is prepped with some new Pro-Line 1/10 Dumont Front/Rear 2.2"/3.0" Sand/Snow Short Course Tires
www.horizonhob...
Mounted to some Losi Baja Rey Wheels (4): Baja Rey
Item No. LOS43006
www.horizonhob...
Purchase the new Losi Baja Rey 1/10 King Shocks Ford Raptor Baja Rey 4WD Brushless RTR with SMART
www.horizonhob...
@White Bat Audio
Karl Casey @ White Bat Audio
/ @whitebataudio
1/10 Enduro Gatekeeper Builder's Kit
www.horizonhob...
RC4WD 1987 Toyota XtraCab Hard Body Complete Set
store.rc4wd.co...
Hobbywing EZRun MAX10 Sensorless Brushless ESC/3652SL Motor Combo (5400kV)
www.amainhobbi...
Element RC Enduro Gatekeeper 4x4 RTR 1/10 Rock Crawler w/2.4GHz Radio on sale at this time $299.99
www.amainhobbi...
Neewer 2-Pack Photography Lighting LED Video Light Stick Kit Dimmable 5500K with 79-inch Light Stand for Photographic Video Fill Light/Live Streaming/Video Conferencing/Zoom Calls/Live Streaming
www.amazon.com...
Neewer 2 Pieces Bi-color 660 LED Video Light and Stand Kit Includes:(2)3200-5600K CRI 96+ Dimmable Light with U Bracket and Barndoor and (2)75 inches Light Stand for Studio Photography, Video Shooting
www.amazon.com...
How to film rc
how to make mini studio
how to build sim racing cockpit
scale rc truck
scale rc prerunner
rc paddle tires
rc dune buggy
rc buggy

Опубликовано:

 

9 ноя 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 90   
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
You can get an Element Enduro Gatekeeper for $299.99 RTR its on Sale while supplies last www.amainhobbies.com/element-rc-enduro-gatekeeper-4x4-rtr-1-10-rock-crawler-asc40111/p-qqqetzeqbzqqqctz This project is fun already and I can't wait to show you guys the progress since this video. Hit that like and subscribe for part 2 coming soon.
@TrillMurray
@TrillMurray 2 года назад
Cutting and running the axle stubs is how you convert an awd Subaru to rwd too! Haha very scale
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
That is cool man didnt know.
@TrillMurray
@TrillMurray 2 года назад
@STEVE VENTO you’re correct. But you do use the axle stubs to bolt the disk to the hub with the axle nut so it’s similar.
@user-gt9ql2wd1i
@user-gt9ql2wd1i 4 месяца назад
Amazing bro...
@DoubleClutchProductions
@DoubleClutchProductions 4 месяца назад
Yah, buddy, thank you for watching 👊
@SwampersRC
@SwampersRC 2 года назад
If you cut a piece of lexan to fit in the boatsides and glue it down it should help stiffen them up!
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Great info man, going to have to try that
@daniwarner2702
@daniwarner2702 2 года назад
Send it dude!!! I’m so ready to se this thing shredding!!!
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Its going to rip bro, thanks for the support.
@pablolopez-sr5cb
@pablolopez-sr5cb 2 года назад
That you…for your videos are very interesting and they also give me ideas thank for sharing 👍🏻👍🏻👍🏻👍🏻
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Thanks Pablo, appreciate you watching 👍
@slowcrawler2695
@slowcrawler2695 2 года назад
Those shrink body mounts are actually really strong. I doubt you'll need to add an epoxy or anything to make them "stronger". Awesome build man
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Ha ha thanks man. Those mounts will surprise me if they hold up.
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
@STEVE VENTO The quality of design is great, could have lined the cab up batter too, I think my gripe was they weren't marked or mentioned that it was 3d printed and were pretty expensive, they did hold up to some big wrecks so I have to some criw on that. They make good quality stuff
@seanharrison4218
@seanharrison4218 2 года назад
that's gonna be awesome!
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
I am so pumped on the progress so far. Its going to be a true scale RC ripper. Thanks for watching.
@josephcruz671
@josephcruz671 10 месяцев назад
Got it. Thank you
@DoubleClutchProductions
@DoubleClutchProductions 10 месяцев назад
👍😎
@scaleaddiction
@scaleaddiction 2 года назад
love your channel man, keep up the good work
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Thanks buddy I like your styles too, thanks for the support 👍
@scaleaddiction
@scaleaddiction 2 года назад
@@DoubleClutchProductions thanks brother 🙏
@713Ace529
@713Ace529 2 года назад
Looking good there bro!.👍
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Right on man 🤙😎 thanks for watching
@petaniganteng
@petaniganteng 2 года назад
Wouw amazing nice vidio sharing dear 👍🙏🍁🤝🏻🤲☕☕💐🌱💐🖐🇮🇩🇮🇩🖐🏻🤝✌🌼👍🙏👉
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Thank you so much
@michaelfanning1193
@michaelfanning1193 Год назад
i just got the knightrunner last night first thing i did was cut the front axles out lmao
@DoubleClutchProductions
@DoubleClutchProductions Год назад
Good move lol, it's a fun project, good luck
@ovidium8020
@ovidium8020 2 года назад
stainless screws from the scx10 kit are 2mm longer ... because of the ball ends, it looks like you are gaining about 5 mm (switch to metric!) ... you shouldn't have bend that piece, a polyurethane washer would've helped
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
I reached out to Scale Metal Supplies prior to bending it. Can't switch to hardware I don't own just using what I have on hand. Thanks for following along and if I run into these issues again I will use your suggestions. Thanks for watching 👍
@coopersharp2921
@coopersharp2921 2 года назад
Hey, I was thinking of starting a project like this myself, how did you get the chassis? Did you buy the trailruner, or the chassis kit, and then added the ifs kit?
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
I recommend getting a IFS Elwment rig and adding the trailing arms. I would do a Trailrunner and get a ExtremeRC4x4 trailing arm conversion kit for yeti arms and a set of trailing arms for the yeti and that is a great starting point. You can reference the Bronco prerunner video for the current suspension package and motor setup 🤙good luck and feel free to reach out for questions
@coopersharp2921
@coopersharp2921 2 года назад
@@DoubleClutchProductions thanks!
@tonyromano6220
@tonyromano6220 Год назад
New viewer here. I am attempting to grasp the concept of your builds. 2wd scale good a jumps and bashing?
@DoubleClutchProductions
@DoubleClutchProductions Год назад
Google desert prerunner, high performance long travel scale truck.
@DoubleClutchProductions
@DoubleClutchProductions Год назад
It's hard to understand without knowing what a prerunner is and does. Take a stock truck and modify it to be performance based and capable of extreme abuse. Jumping, drifting, high speed whoops. Thanks fir watching hope this helps you get a feel for what we're trying to do👍😎
@DoubleClutchProductions
@DoubleClutchProductions Год назад
Just got home, glad to help you research any way I can, You can see the running videos of these trucks shows what I made them for. Thank you for taking the time to ask, in California these types of trucks are all over and very common so I do a poor job of explaining the concept.
@khiemtran6421
@khiemtran6421 2 года назад
congrats on 1k sub
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Thanks for the support. Appreciate you.
@fogcityrc4874
@fogcityrc4874 2 года назад
My bro!!! Making a build video fun and entertaining! Talk about edits...check you out...awesome! Congrats on 1k on the Subs!!
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Thanks for the continued support broskie. I love custom builds and this is a great way to turn an ordinary rock crawler into a true scale RC ripper. Thanks on the 1k, respect from Oregon's Adventure Coast.
@michaeltrilck5680
@michaeltrilck5680 2 года назад
Hi Mister! Nice... A wunderfull video series. It helps me a lot to understand more and more... (RC is my Corona Hobby, lot's of time the last year, you know) I'm only the typical RTR guy... Kitchen table is my garage (when she's outside 😎😙) Lots of interesting thinks here to see. For example the tire size, very scale, i think... Gearbox Tuning ("count teeth") And so on... Espacially at 1'10"😁 👍. Sounds good😆👍👍👍! Three hats off, three cheers and good luck for your mission! (hope you can understand my bad english, greatings from the other side of the world) 😉
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Thank you for watching and greetings from USA
@Pitstopcomponents
@Pitstopcomponents 2 года назад
Your english isnt that bad to be honest!
@michaeltrilck5680
@michaeltrilck5680 2 года назад
@@Pitstopcomponents Hi! Realy? Google helps me a lot. 😉 I wish my english was better... Understanding is more complicated for me, espacialy technical things/words, ye know... But, does'nt matter... I resently stuffed a Hobbywing 1800kv Combo in my 1/6 Willy's Jeep... Only a english operation manual... Every thing went well... Nothing was burning/cocking/sparkling... AND it runs perfect 👍👍👍😁
@josephcruz671
@josephcruz671 10 месяцев назад
Where did you get your body mount? I want to mount a hard body on my ecto.
@DoubleClutchProductions
@DoubleClutchProductions 10 месяцев назад
Shrinkrc I believe, I remember getting it on Ebay way back, Google element enduro RC4wd body mount, 👍😎
@connorclark8541
@connorclark8541 Год назад
Only thing I've noticed is the king shocks are a pretty cheap quality and I've had everything on them fail. Snapped shafts, broken ball end, leaky, shock cap balls get wore out easy. Maybe I just didn't use them right🤷‍♂️
@DoubleClutchProductions
@DoubleClutchProductions Год назад
Your totally correct and I dont think you used them wrong there not the best quality that's for sure. Check out the shock upgrade video on my channel for an update. The Toyota 4runner rc prerunner I did is running the same updated shock package, baja rey fronts with Powerstroke Xts in the rear. Thanks for watching
@connorclark8541
@connorclark8541 Год назад
Good to know I'll give it a look. Thanks for the info
@SnarkyRC
@SnarkyRC Год назад
Yeah king shocks are all bad. I have a whole box full of broken king shocks at my hobby store.
@blane4thgen
@blane4thgen 5 месяцев назад
is the ifs you used from the stock knightsrunner rtr or element ifs conversion kit?
@DoubleClutchProductions
@DoubleClutchProductions 5 месяцев назад
Yes, just the standard Associated IFS Conversion kit. The Camburg IFS 2 is leaps and bounds ahead and worth every penny!
@DoubleClutchProductions
@DoubleClutchProductions 5 месяцев назад
I have 3 used IFS 1 units, one converted to 2wd just sitting on a box. Let me know if you need any parts, getting harder to come by these days with the IFS 1 discontinued. Have a good weekend 👍
@FOURFTP
@FOURFTP Месяц назад
Hi, will these king shocks 100mm fit on a senton ? Or has anyone fit theses king shocks on a senton
@DoubleClutchProductions
@DoubleClutchProductions Месяц назад
Not familiar with the Senton but I would not recommend these shocks outside of crawler use. There not designed for performance or jumping. Spring rates are what hold the weight of any vehicle when looking for shocks having different spring weights is the key to shock upgrades.
@FOURFTP
@FOURFTP Месяц назад
@@DoubleClutchProductions got it I see … thanks for the tips . Just got into the RC and learning as I go
@DoubleClutchProductions
@DoubleClutchProductions Месяц назад
@FOURFTP glad to help man.
@zacsmith9146
@zacsmith9146 2 года назад
What sort of gear ratios are you running in that solid diff? I would like to convert my outlaw rampage 👌
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Its funky because its 4wd. It's a 48p spur and a 23tooth pinion but on a stealth x geabox
@zacsmith9146
@zacsmith9146 2 года назад
@@DoubleClutchProductions yeah beauty mate cheers!
@brighamstokes9526
@brighamstokes9526 2 года назад
What length shocks are you using front and rear?
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
100mm front and rear but with the extended ball ends it's more like 112ish ball to ball. Thanks for watching 🤟
@TheMostAriel
@TheMostAriel 2 года назад
\m/ \m/ Sick build!
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Sick dude, glad I can make the work day a little less painful lol, thanks for the support
@bkorules
@bkorules 2 года назад
I see your running mip drivers have you had any issues with the 1.5?
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Heck yah, I shredd them or twist them instantly. Infact in the next video I shredd and noodle another brand. The Baja Rey uses 1.5 for the body buttons and it has so many I thought that's what was causing it. Did you ask me before about 1.5s?
@bkorules
@bkorules 2 года назад
Well dang looking forward to the next video and actually I think so lol my issue is the driver won't fit into almost any screw I tried without forcing it
@SnarkyRC
@SnarkyRC Год назад
Yeah I've busted the 1.5 a couple times. I've had good luck with the ProTek bits.
@DoubleClutchProductions
@DoubleClutchProductions Год назад
Good info 👍😎
@breakshitforthewin
@breakshitforthewin 2 года назад
Who makes mounts to fit this body?
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
I got them on ebay, they were not listed or described as being 3d printed, element enduro to rc4wd body mount is what I searched for hope that helps. Thanks for watching 🤙😎
@austingoodbrake6514
@austingoodbrake6514 2 года назад
What is the truck
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Element gatekeeper, more info in the description and 6 other parts
@Willlllllgriff
@Willlllllgriff Месяц назад
What chassis?
@DoubleClutchProductions
@DoubleClutchProductions Месяц назад
ELEMENT ENDURO
@Willlllllgriff
@Willlllllgriff Месяц назад
Thanks
@mikehansen9898
@mikehansen9898 2 года назад
Please hear me brother. this truck needs a front braking system. I have the idea. just not the means to make it a thing.
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Braking is done by the motor and esc
@greenwolf7083
@greenwolf7083 2 года назад
Is it a losi or an element Enduro?
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
It's an Element Gatekeeper with a IFS kit 🤟
@greenwolf7083
@greenwolf7083 2 года назад
@@DoubleClutchProductions oh,okay, thanks so much 😁👍
@music_coffee223
@music_coffee223 11 месяцев назад
What is the chassis name?
@DoubleClutchProductions
@DoubleClutchProductions 11 месяцев назад
All links and info are in the description
@ZingZingNZ
@ZingZingNZ 2 года назад
Eneal the part with powdered salt.
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
Explain more?
@ZingZingNZ
@ZingZingNZ 2 года назад
@@DoubleClutchProductions I'm only very new to 3d printing. But I've been retaining knowledge as I begin my journey with 3d printing. I stumbled across enealing. Heat oven, place fdm part in powder salt. As it heats salt joins with the plastic causing almost injection mold strength. You will find information on it
@reyesjnj
@reyesjnj 2 года назад
2WD.....I'm out
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
See ya, you'll be back 🤙
@DoubleClutchProductions
@DoubleClutchProductions 2 года назад
@STEVE VENTO told ya
Далее
Project Scale RC Prerunner 2wd Toyota Hard Body Part 2
14:29
«Ой Бой» откуда выражение?
00:45
Project Scale RC Prerunner 2wd Toyota Hard Body Part 5
20:36
Project Scale RC Prerunner 2wd Toyota Hard Body Part 4
20:49
I Built an Epic PreRunner, but I'm an Idiot!
13:56
Просмотров 45 тыс.
I Built a Transparent Boomerang (it's lethal)
13:10
Просмотров 2,8 млн
Super scale Trophy truck first overview
2:18
Просмотров 58 тыс.
RC Crawler has a Secret Trick ***Cheat***
22:33
Просмотров 307 тыс.