anytime, I hope it helps people understand how it works. Its really quiet simple when you see it all apart. Thanks me too, not the most elegant solution because I had to cut the light brackets and zip tie them to the frame but they work well. www.amazon.com/gp/product/B08QMYDFFR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Yes check out my other videos. I was able to get an experimental softer bushing set from propel. They are planning on making them available for more customers soon!
None at all, I made some comments to try to help you. When reinstalling make sure the turning adjustment screws are backed out so there is no added pressure on the rubber rebound bushing. Flip the board upside down so you can see if the suspension kingpin holes are lining up. Use a long flathead screwdriver or some type of prybar to pry the suspension towards the battery compartment. You'll see the holes line up, then just wiggle the bolt in. I HIGHLY RECOMMEND THAT YOU DO NOT USE A HAMMER FOR INSTALLING THAT PIN BECAUSE ITS LIKELY YOU WILL DAMAGE THE BRASS PIVOT BUSHING IF THE BOLT IS NOT LINED UP