Тёмный

Protect Your Massey Ferguson GC 1723, 1725, 1710, 1715 Fan and Filter With This Device. 

Cornbread Creek Farm
Подписаться 3,6 тыс.
Просмотров 12 тыс.
50% 1

Learn about the Sentinel manufactured for the Massey Ferguson GC1723E, GC1723EB, GC1725M, GC1725MB, GC1705, GC1710, GC1715, and GC1720 by RetailREMS.
It is a device that is engineered to protect for fan and filter from damage from tour PTO rod, sticks or any other thing that could cause damage underneath your subcompact tractor.
I also purchased steps for both sides of my tractor to help me up and off again. Saves my knees big time.
I am not sponsored by this company. I just believe in their product and needed to prevent any more damage to my tractor.
The Sentinel is made with industry standard 1/8” thick steel plate and powder coated to make it long lasting. It is engineered to have the PTO bracket give it extra strength with right angles.
Reasons to get a Sentinel
People that have a Mid Mount mower sometimes do not get the drive shaft locked in completely.
When it comes loose it takes out the hydraulic filter or worse. The Sentinel actually gives more room to connect up the MMM drive shaft.
A stick can go up and take out the hydraulic plastic fan.
Tall grass and going around the drive shaft and taking out the O-ring or O-ring is not expensive, but labor can be very expensive. Tractor down time is bad; these issues are usually not covered by warranty.
The Sentinel sells for $150
The steps are $65 each
RetailREMS website address is:
retailrems.com
Tell Mark that you found out about his equipment through Cornbread Creek Farm.

Опубликовано:

 

5 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 23   
@houndsmanone4563
@houndsmanone4563 3 месяца назад
Perry, I just watched your video again and after watching, I subscribed. I have the MF GC1710 TLB and it has done well for me. I purchased the sentinnel undercarriage in 2021 but never put it on. I had a stroke a year earlier but recovery has gradually been progressing but it's not so bad that I cannont complete chores but it takes me hours to do things that used to only take 30 minutes to complete. Anyways, I just wanted to give a shout at ya and let you know that I'm finally getting my butt in gear to install my sentinnel undercarriage protector. Have a fine week and a safe Independence Day 👍🏽🤠 06/27/24
@jerryvess2493
@jerryvess2493 2 года назад
I bought the sentinel and i can honestly say that it has given me piece of mind that's for sure. I also got one step for the left side as i am a big guy also and that step really helps.
@cornbreadcreekfarm7458
@cornbreadcreekfarm7458 2 года назад
I only use the step on the left side. Never use the right side step. Never.
@CHEECHMUN
@CHEECHMUN Год назад
@@cornbreadcreekfarm7458 Me too, it's too tight and I'm skinny!!
@CHEECHMUN
@CHEECHMUN Год назад
Massey Ferguson GC1723E Engine Iseki 1.1L 3-cyl diesel Fuel tank: 6.6 gal 25.0 L
@JeffSeaburg
@JeffSeaburg 11 месяцев назад
Bought both products. Well made and fit my tractor perfect. Waiting for them to make grill guards for these tractors.
@Redneck_Ed
@Redneck_Ed 2 года назад
I just installed my sentinel. It's a pretty tight fit around that wire harness, so I'm gonna take a closer look this week to see if I can adjust it any. For the 3 sentinel bolts, I put the bolts up through the plates so the threads are not protruding down and catching on stuff. Not sure which way is right or if it even matters.
@davekean6751
@davekean6751 Год назад
My thoughts exactly on those bolts
@googlreviews7813
@googlreviews7813 6 месяцев назад
Not sure you have a backhoe edition or not but mine GC1725M has additional plate there from factory to protect it. So if you don't have the backhoe model, just order that plate from Massey Ferguson and should fit right on. Having said that, OEM will likely be more costly.
@davekean6751
@davekean6751 Год назад
I like the MF GC 1700 series compacts.... Good choice!!!
@davekean6751
@davekean6751 Год назад
Hey Perry , Like the vid bro, seriously considering a gc1700 series MF f... Glad u showed the skid plate install,, I am aware of that fan/filter issue.. Steps, nice option!!!
@williamphelan8779
@williamphelan8779 Год назад
I would put a flat washer on BOTH sides. Just a thought.
@andrewvillavicencio8496
@andrewvillavicencio8496 Год назад
Good video thanks, I just installed mine and am a little disappointed that the large shield does not have a way to secure near the top under the belly and it rattles. I had to use ZIP ties around the bar.
@broncobum
@broncobum Год назад
If the back side of that loader frame is flat, I would put the step behind it to make it look cleaner.
@jimmywarren6685
@jimmywarren6685 4 месяца назад
I would put some more holes in those steps and raise them...they are too low in my opinion.
@georgecass8529
@georgecass8529 2 месяца назад
Boy I hope Massey Ferguson changed that design on the newer models . Otherwise I'm going to look at the other brands .
@Richard-ju4vo
@Richard-ju4vo Год назад
Did you have any vibration or rattling due to leaving the existing plate installed ? Do you think it would be better to remove it ?
@troywhite3682
@troywhite3682 3 месяца назад
How do you fix the filter shear?
@jasonzoellner7547
@jasonzoellner7547 3 месяца назад
They should be upfront about it. I love my Massey Ferguson, but it's a big flaws
@georgecass8529
@georgecass8529 2 месяца назад
That doesn't look like it's going to solve the problem .
@donaldlambert7819
@donaldlambert7819 Год назад
I wonder if it will interfere with a mid mount mower deck?
@worklife5094
@worklife5094 Год назад
I know you already called him in advance just to get his permission to be on your you tube channel So quit acting like you called him on impulse
@williamphelan8779
@williamphelan8779 Год назад
OMG buddy, get a life !
Далее
НЮША УСПОКОИЛА КОТЯТ#cat
00:43
Просмотров 781 тыс.
Test Drive!! Massey Ferguson GC1723E/GC1725M
19:29
Просмотров 147 тыс.
Massey Ferguson GC1725M removing tree stump’s
16:51
Massey Ferguson GC1725M Premium Sub-Compact Tractor
18:10