PROTECTING THE FLOOR IN A STRAIGHT TRUCK BOX 

I'd stain it first, a nice walnut color

Looks like a bowling alley. To good to work on.

Looks awesome, you guys did a great job!

That floor looks too good to take loads with!!!! lol Great video guys!

Just got my truck done. But it didn't look like yours .but thank you .your video helped me alot .thanks .

Looks good way to take pride in ownership!

Good job guys👍🏿

Heather,,,,you should paint the walls a fluorescent pink! Then add Pom Pom balls from the ceiling and load bar racks!

Great job on the floor. Thanks for sharing

LLOOOOKKIINNGG GGOOOODD!!!! Terrific job guys. I think the walls would look good like that also. Just like a library. I think Heather needs a metal detector to beachcomb with. I don't know how much they cost. Thanks for the laughs & videos.

Definitely doing this summer time

Nice Job.. Your customer is going to Love it'

Great job on the floor guys, it looks awesome👍

looks awesome, that floor looks good enough to be in a dining room home,lol

Wicked nice! Portable dance floor! Do the same to the walls, and that would be even more impressive! Shippers should see, you take pride in your ride! Take care.

Looks good y'all!

You Guys are Fantastic, thank you for your Hard Work, specially at this time, and to all Truck Drivers God Bless you

Looks amaze balls, shoulda got All fancy shmanzee and laid down a Cherrywood stain lol Have the inside looking like the Nyc library or a museum 😉

Looks great

Heather and Jason, you continue to amaze me with your can do attitude towards everything you touch. You continue to be a breath of fresh air in this entitlement world we live in. Jason your t-shirts rock, but I didn't see the whole saying on your shirt about growing the beard. Stay safe, like always you guys rock👍🏻🚛

We bought a Box truck for turning Vanlife. We ended up putting the Kilz Primer on the floor (Since we are putting in vinyl flooring) It was just a top coat to Reduce the truck Smell! It worked Great!

you guys did outstanding work and even the side wall is great

I give your videos a thumbs up before I even watch them because I know they are going to be awesome.

I think the floor looks GREAT! I thought you were supposed to sand lightly between coats? When building furniture, I use to either use 300 grit paper or a course wool pad. I think Heather outworked Jason LoL....

There is a three hour drying time from minwax... I used all the time... Also you can get a cheap brush to cut all around first and use a flat pan and soak the sponge and apply... Looks good tho...

Mr Jason and Ms Heather, your talents know no end. Your dedication and hard work are why you are so exceptional in your craft. The floor is museum quality. Bravo. It is very easy to find people who don't care or have no compassion. Both of you are the exception to the rule. Protection what earns you money is paramount. Skimping can cost you in the long run. May I suggest you name the new vehicle "Brutus". Much Love and hugs, Mark

Looking good very nice

Great job, what kind of plywood did you guys use?

Very nice!! Love the look of it, although in due time freight gonna kill it lol

Am definitely doing that to my truck it look really good

You guys are going to start a new trend call Pimp my expediting truck lol awesome job. I would like to do that to the floors of our box trucks but our company is too cheap LOL

Would love an update on how this has held up!

I did that to my enclosed trailer years ago I did the walls to . The smell about killed me lol

I start to fallow you, all you videos are Excellent,

I do like the floor..looks real good...question I have tho...do u worry about falling now..wouldn't that be real slippery when wet?

How slippery is that when wet?

You must live in the south.

It looks beautiful the floors you should paint the walls white

Do the walls the wood grain will look great.

Fantastic.I have a box truck that has to work while I live in at the same time. I was not going to do the floor at all. How much will your poly U stand up to . Plastic skids loaded half ton of papers each. No fork lift ever drives in, but sometimes maybe forks edging skid take a bite of the floor. Definitely skids (X6) are scraping all the way in . I'm thinking now of doing at least 3 feet back of the cab wall to spruce up to "dining room floor" level since that is the section I live in. Inspired to step up my game a little sooner that I thought. Thanks.

At first ,I thought it was a good vid, but then,...when I heard "POING" I lost it,(IE...ROFLMBO) then it became a GREAT VID!!!...LOL Love Y'all --DaveJ--Ssmh & LOLing

KeyPolymer SmoothMove I’m going to try it it’s a little expensive

don't forget to protect the side walls

It's ready for basketball where the basket on the back

Now put carpet on top of it so nice floor wont get scratched :)

I need to get my box repair the floor has a couple new holes with a forklift went through do you have any suggestions

I think the wall will look look with the same way you guys did the floor

2 coats White on the walls covered with 1 coat of the stuff you put on the floor

I found your videos this mourning. Im on my way to talk to my first contract ill gey hopefully. God willing. Im getting into a 26' straight truck wondering about advice on what freight is the best targets. Thanks.

Wut exactly coating did u used n wut did it cost u?

Did you sand the floor first?

Great idea!!! But i though it was not allowed since we carry some hazardous materials that may have a greater reaction if mixed by accident with anything other then that wood???? Just asking there are no dumb questions

Doesn’t that makes the floor slick?

pretty nice guys, I wonder how it's going to hold up? making me think about doing my 53ft trailer lmfao

I feel the sudden ugre to go bowling.......

Would it hurt to put thin sand down after last coat for non slip

its just a box truck why would u bother the first kid on a fork cliff is going to fuck it all up

how is the floor when it gets wet, is it slippy? i have been researching this for my truck, and they say toa dd a nonslip additive to the sealer to stop slippage on the floor if it gets wet.

Year later, how's it holding up???

Does it make the floor slippery when your shoes are wet from the rain?

Hows the floor now after all these yrs?

I would suggest that you put a side walls , I had load of pesticides , I had one of friends go with me ,it was the same as PARACHUTE , Class B Poison . As note Class. A would be Poison Gas . I don't remember name ,it came in by rail below Merced ,CA. & Madera CA. In Washington state some were close Yakima Wa. & Toppenish ,Wa. I was it was class B Poison , it was big boxes with some plastic around it . When we got there was dust all over , my friend helped unload it . It all most killed him . I called my dispatch and told they tried to sweep it out and wash it, that was the worst that , because the pesticide went in to the wood . Parts per million was so high I was not able load anything in it . I left for office with placards on , was stopped at scale & was told to make them blank , I told that the trailer was contaminated & was going to Vancouver Wa. to are office to try to get it fixed , the shipper was big Company back east & would not fix it , our insurance would not pay .I would load any thing tell it was fixed . I want go in to what I went through .I had 45 ft. dry van . I can tell you that after a year it cost to remove the fours and side wales , because it was contaminated it classed Hazard waste, it coast over 7,000 $ to remove & 5,000 to replace . The trailer was 2/3 payed off .

stain the walls, don't paint them...staining would make it look a lot better.

I have a Question, do know a company ES expedite services out of Memphis, TN, I'm trying to go in to Trucking, they offer me an opportunity, but I really have no Idea, if you can share your experience or what company you recommend to start will be appreciated. Thank you in advance for your Time and Attention, wishing you always safe roads.

will it make it slippery and dangerous for you and the forklift.. ?? yes u do want the floor protected

Do you change your own flat tyre Or do you wait for road assistance to change it for you

Is it slippery when wet??

Why didn't you get a 2nd a axle or a lift axle for heaverier loads

Your box is looking good wait no not that box I ment that in a none sexual way 😂 seriously though it's looking good I like it