PS4 DualShock4 Controller Clicky Hair Triggert Kit Installation Guide - eXtremeRate 

Already got the Dawn 2.0 installed and can't wait to try these with it 😎 The trigger stops not working won't be an issue with me at all. Been after digital triggers for a long time, so thanks for making them. Many thanks as always eXtremerate

Ive been doing this the hard way. Soldering and glueing. Love your guys products

great video. i have taken apart ds4 controllers numerous times, but never removed the fpc board before. that and showing the trigger inserts really helped. installation took me about 35 minutes. been playing with the reassembled controller for about two hours now and totally love the trigger/bumper action. i installed on the ds4 jdm-055 model and had zero installation issues. controller fully functional after first installation/reassembly attempt.

I really like your products, they work great! After working on a few controllers already, its not so intimidating and pretty simple anymore. Only wish you had more color/design options for the back plates with the added buttons

I got this kit, and it's really good! It's tested and approved. PUBG game, live on twitch.

Just installed mine, these are absolutely great.

Wooooaaaahhh now I wanna customize my controller even more

I’m going to buy this just because I really like your products and the great prices.

Just installed mine couple minutes ago and i really got say "GOD DAMN" i'm so happy that I bought the Clicky Kit. Wish I had the courage to install it when it came out. The difference is day and night, having them. So a big thumbs up for you Extremerate, keep up the good work!!! Little sidenote: Before you close the controller installing the Kit, double or even triple check if everything sits flush, thought my order was faulty because 2 of the shoulder trigger didn't really click. After opening it for the 2nd time i found the reason and im happy that the trigger didn't break because it wasn't sitting flush in the case.

Works great only problem was l2 r2 but I filed the clear piece and it worked

Just installed this kit and it works great. However, I had to sand down the face of the clear piece in both the r2 and l2 for it to not depress the switches as soon as the triggers were reinstalled. Also r1 and l1 bumpers wiggle around a bit more than I'd like without the silicone pieces to keep tension on them, but still work well.

looks really cool

Just finished this install, one issue was that the L2 and R2 triggers did not click. This was because the clear bits that went into the back triggers were too tall. It was an easy fix though just had to sand the flat bit of the clear pieces for L2 and R2 down a bit.

A dir poco stupendo!!! Devo assolutamente provarli ;)

How do I get hair triggers ( 1.5mm ) rather than 3mm when using the whole tactile clicks kit? I have been wanting a whole clicky set with 1.5mm triggers but this doesn’t have a whole clicky set for the controller.

I love the entire set up it took me about an hour and a half to complete the whole thing from watching this video numerous times but just a question cause im having trouble with my top two bumpers being hard barely moving is it from not having the rubber padding inside the spot for the bumpers

Everything works but just my r2 an l2 Buttons are working without me clicking them.Can atone help

These didn’t work for me, I couldn’t get the replacement ribbon board in a position where all of the buttons worked, every time I made an adjustment to make the left work, the right stopped working

Is the kit compatible with the remapping backplate kits of yours because of the contacts on the fpc board?

Btw what gen is this ps4 controller? Because my controller doesn’t look like that one. Mine has a bunch of different features inside. They look different

Hi. Will sony back button attachment work normally after this modification?

the clear piece for r2 and l2 pops off even if i install them. What can i do to fix it?

Why don't dot it with omron swichet mouse click Micro Switch For Logitech MX Anywhere M905

Guys I bought this and I installed it. Watch the tutorial right at the beginning and then everything goes okay. One thing to mention the L2 R2 plastic pieces that had to be inserted came a little bit too big. I had to melt away 0.5mm so the buttons weren’t pressed down all the time. Combined with the dawn kit with 4 back buttons and everything went good the first try. My personal rating is 9/10 👍🏻👍🏻👍🏻👍🏻

Got any concepts / plans for the ps5 and Xbox series X controllers?

i bought the extremerate trigger click kit and somehow i got stick drift on both my sticks can someone help me

what type controller trigget this in video do not have spring

This looks amazing. Will you make a version like Battle Beaver Customs has with the "Racer Trigger" ? Basically it moves from 0~50% normally and then clicks to 100%. I far prefer that for my ADS trigger (L2) for some reason, but am still considering this. Thanks for all the work and products you guys put out!

Great products! Installed one of yalls remap kits and also just finished installing this trigger kit. I was curious about the backside paddles. Do ya'll sell circular button caps for the tact switches?

2 days after installing and my controller stopped charging how can i fix it?😊

I have tried looking for something like this for so long I love trigger stops for fps games and nothing really worked till I found the dawn 2.0 but lost the 2 other back buttons from dawn kit im definitely getting this but why now that the ps5 is about to release this would have came in handy years ago

Hi, I'm sure I have the v2 of the dualshock 4 and I have bought this kit along with the remap kit. I have installed everything and my l1 and r1 and r2 are working but l2 each time I push it back into place it just presses the button in and stays like that. Seems like the distance is not enough and I dont know what to do

this is great buying a new controller just to install this. I really don't want to open my dawn 2.0. are we still getting the new kit this month?.

I think a great addition to this would have been if the face buttons ( x,o,triangle & square ) were tact buttons as well and clicky

sorry im late but will these work with bionik quikshots, or extended triggers in general

Can you get this to work with just the bumpers being clicky? I play games with driving and I still want to be able to control my speed. My friend has clickable bumpers like this and I really like the feel

Hey guys I bought this kit, plus back buttons plus the face clicky buttons. What order should I be installing these in? Also will all these work together without soldering?

Is that work with BurnCrotroller ?

Should I install these clicky hair triggers before or *after* doing the 4-paddle Dawn 1.0 mod?

can you still use the function of the trigger to like give a litte bit of gas in racing games because i want to buy this for shooters but i still need to have controll of gas

I wanted to do this but hell nah

Hi, I'm going to buy this, and I've already had DAWN 2.0 FLASHSHOT TRIGGER STOP REMAP KIT FOR PS4 CUH-ZCT2 CONTROLLER. Can I use both them at the same time? Thank you.

The this work jdm-040?

Are you guys developing one with clicky triggers if so do you know how long it is going to take I was going to get these but wanting to try any new improve better ones if you guys are making one.

Will this work if I already have the original dawn remap kit? The one with the 4 back buttons

I would like to know why I can't buy one in the UK yet, first it said the 6th then the 11th now it's saying it won't be available until the 17th where can I order from, this wait is ridiculous I've got everything as soon as it's released can you help with this??

Do these work on scuff controllers

Hey could you guys do one for Xbox. And also are these shorter that you normal trigger stops

My R2 tact button isn't working on the board. After getting the shoulder buttons to press down after sanding clear inserts, it won't register a press. Even taking off the R2 button and directly hitting the R2 switch on the board does nothing.

Need help! L2 and R2 are not clicky! I think silicone pieces does not fit, i dont know what to do D:

are the triggers supposed to have the same click as the L1 and R1 buttons? My controller works fine but the triggers dont have any click at all. Just want to make sure I did it correctly.

I have a generation 3 controller & it will not go through

Bought these for FPS, tried using on Cod and my controller is unresponsive in app but works on the Home Screen, etc. have they banned ‘modded’ controllers or have I messed up my install?

I already have the back buttons, the led kit and a custom shell. I need this.

Do I need the springs in the triggers buttons to use it?

Is the circuit board required for the triggers? I already have a led kit installed onto my controller

it would be perfect pad to me if ExtremeRate create circle shaped d-pad like logitech f310 pad for ds4

@ 4:01 I don’t have a band like that in my controller. Weird

Hi, i bought the kit and i followed all the steps to assemble it, but don't know why my square button doesn't work...do you have any advice? Thank you

Hahahaha the Song is the german Song "mein Bizeps brennt" hahahaha

I just bought your clicky trigger kit I've used your products for Xbox recently and loved it but the clicky kit I bought for the ps4 controller both of the triggers don't click at all and I can't figure out why I've tried everything I can think of can you help please?

The second I saw this I just had to click

I aim and shoot with the L1 and R1 bumpers. Does this mod have any issues when pressing those buttons at the same time?

If you had a six button layout for the dawn kit and trigger stopers that can turn on and off it woyld be great. Also hope you guys and gals can make a ps5 controler re map at launch

Cna this be applied with the extra buttons

Why won't my controller open, with all the screws out.. the bottom center of the controller Is completely solid like there's a screw In it, everything else opens up.

Should I buy it

Will this work with the dawn kit? If so I'm buying immediately.

Do these actually make the clicking sound or is this just for performance? I'm thinking of buying them soon.

I bought this product but it is not what is advertised. I tried the clicky kit for PS4, it did not work. When I finished it and reassembled it, I tried a game with it. The controller would not stop auto firing, I tried several times but no luck. Thankfully I purchased it for Amazon, and I was able to get my money back.

Does it work with the dawn remap kit 1.0 and the dtfs led kit 2.0?

does this kit work with the extremerate dawn programmable remap kit too??

Will this work in conjunction with your newest LED kit?

Hello, I've just received mine, I've assembled it, it's very good but I can't press R2 and R1 or L2 and L1 at the same time. Can you help me please ?

That's really cool & all & am gonna do it myself later today.... but couldn't you just skip all the hard stuff & just add the plastic that goes in the triggers & have it work fine?

Be great if you could add clicky buttons to D PAD and other buttons too. Maybe on your upcoming PS5 mods?

Are you able to use this with your DTFS LED mod kit?

Great invention, as an engineer you need to leave space to solder this to your dawn remap kit or one that has paddles & mouse click triggers & bumpers. That's what I build that why I said I want a member ship from your company, I buy all your products I'll be doing a video on all the parts I've bought from you. Nothing bad will be said but I will be honest as an engineer & say where I think you could improve as well as the products I've built using your parts.

@extreme rate does it go from zero to 100 or o to 60 like other diy trigger stoppers...can it still work on racing games?

Worth it

I just bought it and when i try to turn on the controller it does not work and i have the dawn v1 is been working fine but when i put this one the controller does not turn on does anyone know whats going on

My l 1 button is not working so good

will the first version with 4 buttons also be available with trigger stop? 😁 that would be really nice 👍👌

Can we use this along with the LED kit you offer?

Will there be something similar for xbox controllers?

Hey I was wondering if I can order from gaming cobra even though I am from the UK because this product is not in my amazon region thing

Can you put these digital switches in the pro decal controller

Would you sell a version of this without the trigger locks because I wanna get the clicky hair trigger but only want two paddle buttons

Do these make a click noise/feel when pressed?

Is it possible if you could sell a controller back shell with trigger lock without back buttons?

Hi can this stack with the back buttons mod from eXtremerate. Been looking to do this mod for some time now and could not find it any ware thanks

I build it an L2 and R2 are to close that I can’t push it.

Does it have a clicky sound like mech keyboard?

wait you guys should make a version with clicky buttons. I would like to see that

why wont l2 and r2 fit with the rubber thing on?

The kit works fine, but sometimes i have the issue, if i press L2, the L1 button activates. For example if i want to ADS in warzone and press L2, i suddenly throw a grenade which is on L1. This only happens sometimes! Most of the time it works without any problems. Anybody else got this issue? Please help.

Hello I'm having a bit of trouble when it comes to putting the L2 and R2. The triggers already seem to be pressing on the button when stationary. I have the right model of the controller and I already have the dawn 1.0 which has worked perfectly. Please could you help me on this. Thanks

Please since you've already gone through the effort of making the replacement flex, can you sell a version without the buttons? Essentially a much higher quality version of the original part. The stock ribbons tend to break traces near the button pads when people press the buttons too hard for a long time. The pcbs you made should last a lot longer, and a stock upgrade version would be very welcome for people who want the quality of your part, but still want analog triggers. Also, you could totally sell an rgb version. You already did most the work, a single pcb for rgb and click triggers (or just a flat upgrade flex pcb with rgb) would be amazing.

can it combine with dawn programable remap kit ??

Is it possible to combine this with a remap dawn 2.0???