Pt 1 Honda TRX300 Final Drive Rebuild At D Ray's Shop

Подписаться 44 тыс.

Просмотров 194 тыс.

50% 1

Today I'm rebuilding the rear final drive on this TRX300 4X4. Do it yourself and save money! More videos on this repair coming soon....
Thanks for watchin', have a goodun'!
Link to the axle/brake removal,
• Pt.1 Honda TRX300FW Re...
Part number for the pinion retainer nut,
TL1102
I created this video and I own all rights to all content in the video.
Music provided by : Kevin MacLeod incompetech.com...
Name of tune "Slow Burn", and "Big Rock" Kevin MacLeod (incompetech.com) Licensed under Creative Commons "Attribution 3.0" creativecommons...
Music provided by : Jason Shaw://audionautix.com
Name of tune "Modern Rock Boy" Jason Shaw (audionautix.com) Licensed under Creative Commons "Attribution 3.0" creativecommons...

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 100

@howardswift6968 7 лет назад

So helpful mate , my big red final drive was shot. Now ready for bearing kit. Didn't have the special Honda tool you used so got some box section steel to fit four corners , worked a treat. Big thanks from Wales.

@jeffclaus4422 8 лет назад

So glad your back. Your vids r the best!!! So helpful. Thanks.

@DRaysShop 8 лет назад

+jeff claus Thanks!

@tommyfalcinelli7040 4 года назад

Great informative video on the brakes! Just what I needed

@auggiedog5 6 лет назад

Thanks for all the information and parts supply's. The best rebuild videos.

@benitogomez6275 3 года назад

I enjoy all your videos and really help me, best videos ever seen

@cmanningjr 8 лет назад

Great job! This will help a LOT of people!

@DRaysShop 8 лет назад

+Carl Manning Thanks!

@James-mv9qx 7 лет назад

Great video, very good explaining. I'm looking to pickup a used quad and may need to do this, feel much more confident now

@2StallGarage 2 года назад

This video really helped me out, I appreciate it. 👍

@farmboy30117 8 лет назад

Dang D-Ray, I bet you'd wished you had worn gloves on that job! I bet that was a mess to clean up!

@josephhaddock7577 6 лет назад

I found after trying various methods without success in removing the small pinion bearing that by using a sharp pointed punch fitting loosely in the hole , a couple of sharp strikes results in exploding the race.

@hutshillman1596 4 месяца назад

Awsome bro thank you ray

@tendertwix1029 8 лет назад

About time u upload a video

@DRaysShop 8 лет назад

+Mitchell Vogel Thanks for watchin' man, I'm tryin'! lol

@tendertwix1029 8 лет назад

+D-Ray Smith I'm just joking man great job

@HondaNation03 7 лет назад

Can u do a video on the front differential

@jeremymatthews5169 2 года назад

You didn't change the pilot bearing? How do you get it in with that lock ring

@joeteasley9652 7 лет назад

what about the needle bearing in the case were the pinion sets in

@imnottellinudontwannaknow3188 4 года назад

Is there a way you could lengthen the front or rear final drive? I want to give mine a higher top speed

@bsar9128 8 лет назад

Great video man! I just bought a 300 and ran across your channel last week while looking for this subject. I look forward to the rest of this series! I'm right down the road in Cabot, so now I know there is a knowledgable guy around I can take my bike to also! I do have to ask if you have ever tried the 350d rearend swap on one of these bikes? I am compilations doing it later, since I have a old 350 sitting in the shed.

@DRaysShop 8 лет назад

+b sar Thanks for watchin', never tried swapping from a different model.

@jorgevilmej3977 7 лет назад

thanks for your help and where a can buy the tool for the pinion retainer nut

@Adayinthelifeof-AG 3 года назад

Awesome video, I have a Honda Foreman 400 that has a welded axle to the crown gear. I just purchased rear differential bearing and seal kit. Is it still possible or because of the weld did I limit myself on this bearing repair.. I have a leak in my rear diff and want to resolve it.

@dieselpoop 8 лет назад

excellent video as always d Ray! keep up the good work! I always look forward to ur videos!!!

@DRaysShop 8 лет назад

+Chris Pesta Thanks, I enjoy making 'em!

@WyWorks 8 лет назад

+D-Ray Smith Hey do you have a preferred tool brand?

@DRaysShop 8 лет назад

+Wyatt B I have a lot of Snap On and Matco tools.

@abelmorales877 7 лет назад

thanks for your help and where a can buy the tool

@juanarrue2373 4 года назад

Hello. Where does the vent hose goes to? to the air filter cabin right?

@adamschneider8040 Год назад

Will a 300 rear end work in a 250? 1986 fourtrax 250

@josephbroadnax9954 4 года назад

Hey Ray like your videos does this oem tool work on a 1990 yamaha big bear 350 Thanks Joe

@TheCrookHook 8 лет назад

Wow after looking at this video my final drive is in bad shape. I can't remove it from the housing! Yours just came off just like nothing. Also, the drive shaft stayed in the swing arm... Should I be alarmed? lol Thanks for the video!

@joeyseabaugh6742 2 года назад

The driveshaft should stay in the swingarm. The bike he was working on has had the driveshaft separated from the unjoints at some point. It was not reassembled correctly

@rcmen2637 8 лет назад

how do you tell if the pinion bearing is going bad

@trikelyfe6090 4 года назад

Same as big red 250?

@bigheadvlogs6443 8 лет назад

I need a 64mm differential pinion bearing nut socket tool do you have one for sale and how much

@justinkasinger1913 4 года назад

Nice vid diy er from Arkansas also

@jacrancam 3 года назад

Are still doing work, man I need your help

@robertowens536 3 года назад

Wer could I buy a diff please

@gerardosoto9154 8 лет назад

what did you use to get all that old fluid out?? ive tried degreaser and it doesnt work. usaully i have to get a ton of rags to clean it. just wondering if there is a easier way to get it all out lol

@LifewithJames 4 года назад

Gerardo Soto lots of brake cleaner is how I’d do it

@gabewilson2001 8 лет назад

If I replace the rear bearings do I need to replace them both or just the brake side??? Being that the other bearing last longer since its in grease??

@marcusmoyer7954 3 года назад

they both get the same wear so why would one not change them together ,,rule of thumb ..

@craigmorrison1398 7 лет назад

Do you have a video on removing the rear axle on a 2005 honda rubicon 500. Also a video on removing the swing arm to replace the bearings

@bradbeem1 8 лет назад

great vid. can you do a vid on installing a warn 424 diff switch?

@DRaysShop 8 лет назад

+b beemer Thanks! If one ever comes by the shop, I will.

@barrymorrison1927 8 лет назад

how much freewheel should I have? mine is hard as heck to turn by hand with wheel off

@joeyseabaugh6742 2 года назад

If you have taken the rear end apart and reassembled it without keeping the ring gear shims in proper orientation “right/left”, there is a good chance the pinion and ring are binding. Those shims look the same but there is a minute difference on thickness from right to left side

@nancymounts7095 4 года назад

You video is to the point ...

@bonecollector50 5 лет назад

How can I contact you .... I cannot find the spring clip for the pinion bearing anywhere..... thanks for your help

@joeyseabaugh6742 2 года назад

That spring clip is not necessary. Drive the bearing in and the pinion hold it in place. Honda over engineered that one just a bit

@zx8401ztv 8 лет назад

Ooow i feel sorry for you mr ray :-(, never nice to work on nastyness like that. The brass rod is a great way for diy'ers :-D, ive used copper/aluminium hammers and wood to apply impact force, the wood is forced into the shape and spreads the impact really nice, no damage :-D Cant beat a bit of wood... well you can beat it but... ooow you know what i mean ha ha :-D

@DRaysShop 8 лет назад

+zx8401ztv Thanks for watchin'!

@camdenbaris2937 5 лет назад

Or take a nut that the socket size it 1 7/8 I just did it

@1999tacotrd 8 лет назад

Hi D-ray do u fix these for a living? I got one I cant get the races out and was wondering if I mailed u the diff and the bearings if u can change them out for for me. I sent u a PM on facebook with all the details it might have gone into your (other) folder on there. if u could get back to me on the cost of fixing it and I'm only a few hours from Judsonia

@tinkeringwithTimmyyy 8 лет назад

Had my dad build me tool

@juanandresruizlondono4012 Год назад

Hola

@TheTarrMan 8 лет назад

Neet!

@DRaysShop 8 лет назад

+TheTarrMan Thanks Ben!

@willybean3104 4 года назад

Does anyone know what the part number is for the coupler that goes on the pinion gear? I am looking for the part but can only find the pinion gear itself.

@jimdarcey2934 8 лет назад

Awesome tutorial. Learned more than I thought I would. Keep the lessons coming.

@SteveRobReviews 8 лет назад

Man that was a nasty looking gear drive , ha must of spent a long time in the swamp. Nice vid buddy...

@DRaysShop 8 лет назад

+Steve Rob Thanks bro! Yeah, it was NASTY!

@themfknightrider420 8 лет назад

are you back at doing videos or are you just doing couple of videos? missed the show

@catchemalive 4 года назад

Man this is by far the best video period for this job. Thanks a lot. How did you get the metal sleeve off the pinion that the rubber gasket slides into that’s connected to the drive shaft?? Mine won’t come off!

@BrandonSmith-qb8vh 2 года назад

Is it the same special socket as I need for my 250es

@ChristopherBPetrovic 3 года назад

D-Ray, I'm in trouble with my TRX300FW 4X4! Bought used, rebuilding the rear differential and the case cover has 2 ears broken! Anywhere I could contact to get a replacement? Can you help?

@wesw186 3 года назад

How much do you charge I’m local?

@soggytortilla066 3 года назад

I can’t get my ring gear out of it

@rpalmer274 2 года назад

Is that 2 or 4 wheel drive

@quarrena280c7 8 лет назад

D RAY I NEED HELP my honda big red 250es is making a clack noise in the final drive what do i do and what is it?

@davekelly923 2 года назад

Thank you, excellent tutorial, especially the purpose tool and part number, cheers from Ireland

@hankjourdan4010 3 года назад

Basically my 250sx rear end..helped a ton to see a guy do it before you dive in..thanks

@mudgrippmike3489 3 года назад

where is pt 2?

@dennisharrison4744 3 года назад

I made one lol

@dylanapple9411 5 лет назад

Any helpful hints gor a stuborn one? Ive got it loose but cant seem to get it fully apart?

@MrRbt61 7 лет назад

work the retainer clip around with a pick then hook up end -pull out with pliers

@jacksonmiles3532 7 лет назад

this is a great video. wish you would do one for the front diff

@logantffny1 4 года назад

Will there always be 2 shim washers? I had a buddy clean mine and I only got one washer back. I think he might’ve lost one in the parts washer and didn’t know

@logantffny1 4 года назад

This comment is about the front diff in this case

@benitogomez6275 3 года назад

A question I need. De numbers of each bearings

@benitogomez6275 3 года назад

Please

@benitogomez6275 3 года назад

Can you e mail me I have photos