Тёмный

(PT.10) Re-Jetting the Carb and Upgrading the Exhaust on the most HATED scooter on the internet 

Scooter 911
Подписаться 45 тыс.
Просмотров 128 тыс.
50% 1

Video Checkpoints:
1:21 - Removing the carburetor
2:34 - Removing the non-serviceable or "tamperproof" screws on the carburetor
6:38 - Swapping the main jet
7:50 - Introduction to the new performance exhaust
11:25 - Removing the stock exhaust
13:55 - Installing the new performance exhaust
17:05 - First start-up with new exhaust
18:13 - Inspecting the spark plug to check the tune
19:52 - Reaction to the upgrades
21:54 - Exhaust gasket has failed
23:34 - Adjusting the carburetor's mixture screw (bleed screw)
29:00 - Replacing the blown headlamp (headlight) bulb
32:38 - Final thoughts on the carburetor re-jet and performance exhaust
In my experience working as a technician in independent motorcycle shops I worked on everything from CVO Harley Davidsons to Honda CT90s. But there was one bike that always stood out with exceptionally poor quality. The Tao Tao 50cc GY6 (139QMB) scooter. And now I'm going to put this scooter to the test and find out if they really are little money pits, or if the issues with the bike are a result of the people who buy these kinds of scooters.
So I purchased a Tao Tao "Pony" ATM 50 and my plan is to make it my main means of transportation for 6 months. Yes from June 1st to January 1st this little scooter is going to be my daily driver. I'll be logging all of the miles, issues and expenses of keeping this scooter running in a log. Doing this will allow me to present a true cost of ownership at the end of this experiment.
The Tao Tao Pony 50 is based on the generic GY6 139QMB platform. They were sold under many different "Brand" names like Wolf, Bintelli, Fly, Rocketa, MotoBravo, Italica, and Dongfang just to name a few. You may be riding one and not even know it!
My scooter has been running lean since it was delivered. This is not unusual for a 50cc GY6 scooter. They are typically jetted extremely lean. This might be because it helps them pass the strict emissions regulations for the United States or to purposefully slow them down in order to meet the "Moped" regulations here in the US. Either way my scooter was running so lean I didn't expect the engine to last long. So I ordered a cheap jet kit off amazon (to stay in the spirit of the experiment with one of the cheapest scooters of all time).
There are a few reasons I did not just re-weld the bracket when I got to work or when I got home. The biggest one is I'm not sure what I would have to "charge" for that repair on my service sheet. In addition to that, most shops wouldn't repair something so cheaply made with such a high likelihood that it will fail again. But the main reason I didn't weld the bracket back on was my ethos of repair. If something fails, it's an opportunity to replace it with something that will better serve the machine. Rather than spending $70-100 getting the same unreliable part back on the tao tao I'd rather spend $40 on a lighter exhaust with better brackets that will be less likely to break in the future.
The exhaust and jet kit did make a pretty significant improvement in the performance of my scooter, but at the expense of the fabulous fuel mileage I was experiencing.
The parts I've used in this experiment are so far are:
Bel-Ray 10w40: amzn.to/3d623vR
Bel-Ray 80/90 Hypoid gear oil: amzn.to/2N3yFft
NGK CR7HSA spark plug: scooter911.com/shop/ngk-cr7hs...
Brake line: www.scooterworks.com/Blue-Lin...
Performance Exhaust: amzn.to/2GfzQs4
Carburetor Jet Kit: amzn.to/32UtBTu
Drive Belt: amzn.to/3hC3rt2
Headlamp bulb: amzn.to/37huSVn
I make my adjustments to the mixture screw using this Digi Synch Manometer/Synchronizer: amzn.to/37B81nl
Follow my experiment in real time! Here is a link to my Tao Tao log/Health Report!
docs.google.com/spreadsheets/...
If you want to keep up with this project between videos be sure to follow me on social media!
Instagram: / garretseesi. .
Twitter: @SeesingGarret
Facebook: garretseesingofficial
#TaoTao #Gy6 #Scooter

Авто/Мото

Опубликовано:

 

28 ноя 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 299   
@scottishzoomer
@scottishzoomer 3 года назад
Never heard an American say “knackered” before, brilliant 👍😄🏴󠁧󠁢󠁳󠁣󠁴󠁿
@Shane-Singleton
@Shane-Singleton 3 года назад
I adopted "knackered" after watching Top Gear for years. :) That and "Hammond you Idiot!" and referring to somebody as a philistine lol
@chrishowells3097
@chrishowells3097 3 года назад
I haven't either - funny how Americans think you're saying 'naked'..
@allenwalker4701
@allenwalker4701 3 года назад
"Bob's your uncle" is another. I think he has watched Burt Monro/World's Fastest Indian...^^
@gilmendoza8092
@gilmendoza8092 3 года назад
Nice to see you back..
@jenifonh.6949
@jenifonh.6949 3 года назад
I have waited for this for so long.
@xXdzsodzsoXx
@xXdzsodzsoXx 3 года назад
Me too. Should be more often
@chucksvault
@chucksvault 3 года назад
For the plastic pealing? Lol
@jenifonh.6949
@jenifonh.6949 3 года назад
@@chucksvault nah for another vid. This is 6 months old
@Tomijus
@Tomijus 3 года назад
Love your videos. I waited 2 months for this video.
@Jesse-B
@Jesse-B 3 года назад
"Knackered" haven't heard that one for a while haha. I ride a RK but for some reason I have become fascinated with your journey on this little banger.
@RustyGlovebox
@RustyGlovebox 3 года назад
Nice work taking the time to do the upgrades and checking how it performs. Everything comes at a cost I guess better drivability but a drop in fuel mileage. Good luck with the Tao Tao
@JoshRips
@JoshRips 3 года назад
I was so excited to see this notification
@geofflaham
@geofflaham 3 года назад
Glad to see your videos. Missed them.
@jasonlaverdiere974
@jasonlaverdiere974 3 года назад
Hey Garret, great work on this series as well as your other content! As an owner of a Honda Reflex 250, I enjoy watching someone who is passionate about scooters- Keep up the good work!
@BigEpinstriping
@BigEpinstriping 3 года назад
I prefer the LED BA20D bulbs. most suck, but I found a couple good ones. Bad ones either don't work at all or flicker horribly at different revs, and require Capacitors and other components to be wired in to your harness to eliminate it. After going LED I haven't needed to replace it, They're also much brighter (which is great for safety). If you do get the incandescent bulbs still, go with the Sylvania bulbs, they're half decent. Also keep an eye on your Voltage Regulator if you pop another bulb again, that's one of the first signs that your regulator is going bad. Lastly, avoid the halogen BA20D's, they run so hot, they'll melt your headlight housing. Also, while you're at it, put in an LED Brake light, you definitely don't want that burning out on you! They work great, and are easy to find.
@stevewest5397
@stevewest5397 3 года назад
Thanks man! I'm rebuilding the engine of a Saga Retro scooter (w/ a 50cc GY6) right now and I think this will be very helpful to get it running well now that I've BBK'd it. I'll go back and watch some of your previous videos in the series to see what other things I can learn.
@GeppyZ
@GeppyZ 2 года назад
The carb adjustment part you show in this video is extremely useful! I have replaced a cilinderhead and needed to dial in everything again. Was struggling with the carb, this really helped!
@Scooter_911
@Scooter_911 2 года назад
So glad it helped!
@YWHIC1
@YWHIC1 3 года назад
Installed Keihin 20mm a few weeks back with 80/34 (pod filter) and factory exhaust saw 2-3mph increase. Just got similar exhaust. Thinking 85 jet as step up. At sea level here in NJ. Glad your back.
@scott___1737
@scott___1737 3 года назад
Glad you're still working on it. Was wondering if plans changed..Hats off to you. I'm not a scooter guy but enjoy your channel and the serries.
@altezzax7
@altezzax7 2 года назад
the last part is the most satisfy part! ooh yeah! Thanks for the great video! 3 and half tuned..noted.
@KenpachiZarakiX
@KenpachiZarakiX 3 года назад
I like that gangster GTA music when you started working on the carb
@EuwijkLevi
@EuwijkLevi 3 года назад
love this series!!
@VirberelloScooterTips
@VirberelloScooterTips Год назад
Great video! Keep up the great work and thanks for sharing your knowledge.
@davespooney8472
@davespooney8472 3 года назад
Hey, you’re one of the RU-vidrs I like at the start of the vid - so I don’t forget! Great videos mate keep it up 👍 Would love to see a vid of it being ridden, now it’s running right, also when the test is finally complete - a 72cc kit with A9 cam wakes this little motor up nicely 👍
@RickyRisnandar
@RickyRisnandar 3 года назад
hi garret, i think you are a great presenter, your videos are not only informative but also entertaining... greeting from the south east of asia 🇲🇨
@mikeadair4471
@mikeadair4471 3 года назад
Great video! Looking forward to the next update!
@Ricks_Tech_Talk
@Ricks_Tech_Talk 3 года назад
The videos are helping me with my 2008 Roketa MC-04 150... Well done and TY
@Foggyfighter
@Foggyfighter 3 года назад
Awesome content as always!!
@mikedee4399
@mikedee4399 3 месяца назад
Damn thank you so much!! I just bought my girlfriend a 150cc gas razor scooter. When it got delivered 75% assembled. I completed the assembly and my girlfriend was really happy and excited to try it out. Well that didn't last long when she went to ride it she pulled back on the throttle just a little bit and the scooter took off surprisingly fast I wasn't expecting it to be that powerful when starting from stopped position. She ended up crashing into the curb and now scared to ride it until I adjusted throttle
@hnappa51
@hnappa51 3 года назад
Loving this video series
@craigwhite7428
@craigwhite7428 3 года назад
Very nice job rejetting and tuning. Love your Tao Tao jingle. Something satisfying about removing plastic film. By the way, my Honda PCX 150 gets 102mpg.
@just4kicks950
@just4kicks950 3 года назад
Nice job ! I would've just bought a LED Headlight & did the upgrade 💯better visibility . Thanks for sharing 🛵👌
@itsmephil2255
@itsmephil2255 3 года назад
Thank god a new video.....seems a lifetime ago !!!! 👌
@steve8264
@steve8264 2 года назад
Dude I really like your show I've been working on the GY6 engines and scooters for quite a few years you're doing a fantastic job you got my vote Steve from Annapolis Maryland I like your attitude
@mperez5920
@mperez5920 2 года назад
I really enjoy your videos, so helpful!!!
@larryderuyscher4448
@larryderuyscher4448 3 года назад
I'm in the market for a scooter and just surfing youtube came acrossed your series. First and foremost you have convinced me not to buy a Toa Toa, (thank you for living with it and not me) and second thank you for all the tips to tune a carb. scooter. Finally, thank you for all the laughs. All the little puns and comments you make just make me enjoy the videos. Subscribed and keep up the good work. And!!!! Bob's your uncle!!!!
@pongothecrownvic474
@pongothecrownvic474 Год назад
Any failure is just an opportunity for improvement 💯💪🏾
@johnmorsberger9267
@johnmorsberger9267 8 месяцев назад
Great job!
@goldengaming1112
@goldengaming1112 3 года назад
What took so long for this video to come out I really love your series
@Scooter_911
@Scooter_911 3 года назад
Sorry my friend. I've been extremely busy at my day job and dont have much time to shoot and edit
@steve8264
@steve8264 2 года назад
You're very thorough you got my vote Steve from Annapolis Maryland
@mikem9006
@mikem9006 3 года назад
I am very happy to see you are well and OK. Your videos are fantastic!!!
@Tomijus
@Tomijus 3 года назад
I have no problems at 5k. I wilk big bore it, bigger carb, performance cvt, performance exhaust, cdi, cone air filter.
@Tomijus
@Tomijus 3 года назад
@Anthony Callahan i can because i have air filter spray
@williamhaskellhaskell3162
@williamhaskellhaskell3162 Год назад
That's good info. On pilot jet adjust. Turn out until nothing changes. Then lower idle. Screw Bill
@bikelifegee
@bikelifegee 9 месяцев назад
Did 85 work for you or did you go 88
@gixxernavigator
@gixxernavigator 3 года назад
Used to help out many years ago in a friends chinese bike workshop. This brought back so many memories. I still think chinese stuff is getting better and better.
@JumpFloater4
@JumpFloater4 3 года назад
In at 3k miles and somehow magically haven't had any issues but my exhaust is getting rusty. Good vids bro been waiting for this for awhile.
@adambeforeeve5904
@adambeforeeve5904 3 года назад
3000 or 3000 miles
@kalebnotto1596
@kalebnotto1596 3 года назад
@@adambeforeeve5904 he literally said 3000 miles?
@adambeforeeve5904
@adambeforeeve5904 3 года назад
Or he said 3000 km because if he on a tao tao they read in kilometers! So once again the question still holds. 3k miles or 3k kilometers
@JumpFloater4
@JumpFloater4 3 года назад
Oh shit yeah 3k km my bad lol
@adambeforeeve5904
@adambeforeeve5904 3 года назад
@@JumpFloater4 I thought so thanks my good man
@jarikinnunen1718
@jarikinnunen1718 Год назад
The automatic choke adjust screw often being glued. It can release by boil it in water about ten minute. The basic adjust is: Heat it up by battery and put it in its place. It needle must shut its jet completely. When it cool down, needle rise and jet opening.
@edoardomancini838
@edoardomancini838 3 года назад
Nice Job!!!
@dutchguy1975
@dutchguy1975 3 года назад
i got a GY6 50cc scooter. a Kymco Agility. The exhaust was 1 of the first things to go, 20lb of rust less and a stainless steel muffler with a titanium headerpipe, the Tecnigas 4Scoot. Still turning some heads in the neighborhood after a year and a half, and that's with the DB Killer still in. It costed waaayy more then 40 bucks though, it was around 140 Euro which is around $155
@seangeary7100
@seangeary7100 Год назад
Dude...I just did this same thing you did in this video today... but when I did it, I snapped an exhaust bolt that mounts the exhaust to the engine block and...that...that took me all damn day to fix :/ Between the exhaust bolts, and the crappy exhaust pipe not being made for the Tao Tao (yes...I used the same one you did...even after I watched the video...) AND doing the valve adjustment and oil change... I am tired. But the Tao Tao looks and sounds good. Now I just need to tune the carb ( which means I have to drill out the tamper seal for the fuel mixture screw :(... ) And then it'll be ready for springtime Funtime :D Thank you for your kickass tutorial videos. You are a great teacher :)
@Scooter_911
@Scooter_911 Год назад
Thanks for watching my friend and good luck on your future repairs! (they might be right around the corner...)
@lobolj53
@lobolj53 3 года назад
I got the notification 2 days after it was released! Thanks a lot RU-vid!
@petecurran3995
@petecurran3995 3 года назад
I like that widget! 25:25 👍🏻
@safarijonas3490
@safarijonas3490 2 года назад
Thank you! Very thorough explanations, nice voice and a novice comedian😂
@kylecotton4024
@kylecotton4024 Год назад
Dude, thank you for the suggestion on carb jets! My scooter is running infinitely better, now!
@edwardanderson5801
@edwardanderson5801 Год назад
I have the 2018 Tao tao racer I upgraded the whole engine and trans that being said I was watching your video of the new exhaust and carburator jetting. You mentioned the high beam blew at 2000+miles it's funny because my head light blew at 2216 miles and I paid $23.00 for mine. Now I'm having a no spark issue that's the stater causing that but I can't fix it until March 1st when Amazon gets it to me. I enjoy watching your videos.
@jarikinnunen1718
@jarikinnunen1718 Год назад
The assembling the exhaust pipe, it is easy when scooter is felled to on its left side, on some cushion.
@AltonChaney
@AltonChaney 3 года назад
I love the music!
@cav3man360
@cav3man360 3 года назад
Sweet you did not give up on it
@jamiebrock7625
@jamiebrock7625 2 года назад
I have the same exhaust on my stock 150cc Roma and it dose fantastic, I was In the same boat myself though didn’t come with the bolt I needed that goes with the clamp to mount and I had to weld/modify because the pipe they sent me was to Short too reach the head on my scooter 🤦‍♂️ upgraded the spark plug as well and runs and sounds amazing after everything I’ve done so far (not finished with it yet)
@vladimpaler9274
@vladimpaler9274 Год назад
Nice ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CzfV11sXPU4.html
@charredskeleton
@charredskeleton 2 года назад
How can you resist the urge to peel the protective film? It's like the most satisfying thing that there is! Even if I could resist, go in the house and sit down, I wouldn't be able to leave it. I would HAVE to go back and peel it off!!
@Scooter_911
@Scooter_911 2 года назад
Pain is weakness leaving the body my friend
@kshea4231
@kshea4231 3 года назад
lol you're a very dedicated individual
@Nelson4207
@Nelson4207 Год назад
What todays generation sees as an achievement or dedication is crazy. Cant even dedicate yourself to a job these days, so i guess i see why riding a scooter can seem like a big deal to ya. Lmao😂😂😂
@sammy13ificationable
@sammy13ificationable Год назад
I've got a taizhou mp50, which is like a generic tao tao with different plastics, and the exhaust bracket broke off the bottom of my muffler, so I just cut the bottom mounting bracket off, chopped the tip, tore the inside of the muffler out so it was no longer reverse flow, and welded a 2 inch piece of steel pipe off the bottom of a broken cattle gate on the end, so far its holding up great, i picked up 1mph on my top speed, and it sounds like a honda fourtrax now, even more so with the 100cc bbk I just installed yesterday. Also that's a LOT of backing out on that idle adjustment, the PDQs I've got on mine want 1 and ⅞ turns for sea level, and I'm only at 1000, so that's where I stick em, if I need too, adjust until the exhaust smells right
@Pinhead_larry265
@Pinhead_larry265 3 года назад
Had an exaust just like the one you installed on my old Wolf 50 it ended up failing where the weld meets the flange on the muffler. Got around 2,000 km on it before I went back to stock. Over time the pipe will also change colors due to the heat.
@tammyeagle1724
@tammyeagle1724 Год назад
I have a tao tao also. It runs great. It's pretty zippy. Picks up speed well right off and cruises nicely. I'm wanting more speed going up hilly terrain. Can that be achieved through carburator adjustment or through CVT upgrade or both? It has almost 5,000 miles on it; everything stock except CDI and coil. Thanks for the exhaust tutorial. Most useful as I'm replacing mine also. After that it's brakes. Oh another question I have is about wheel bearings? When/if they need replacing... Thanks again. I've enjoyed and benefited much from your videos.
@NorthSurvival
@NorthSurvival Год назад
Hello, I have a problem, I have a Peugeot Speedfight 1 100cc that recently seized up/heat seized. It was not tuned. I then changed the cylinder, piston etc. It now starts up right away, but after a while it dies all of a sudden (as if you had turned off the key) and then I can start it right up again, this usually happens when I go over 60 km/h or uphill. When I changed the cylinder etc, I also cleaned everything thoroughly, such as the carburettor, intake, new air filter, new fuel filter (there was no fuel filter before) new spark plug. I also removed the oil pump and put a metalplate with a gasket over the hole instead, I now mix the oil directly into the gasoline. Some other info that might be important. - When I drive over 60 km/h, it starts to make a noise from the variator (CVT), it´s sounds quite a lot. - When it died, I tried to start it again while it was rolling and then it started right away, but it made a noise from the variator, like something "let go" that had been seized up, like a rubber sound, maybe from the belt. - The variator belt touches the variator cover on the inside and has grinded a cut in the metal. - In the variator, where the weights are, the belt does not go down to the bottom of the wheel. - The clutch bell had turned blue from the heat. - The place where the connecting rod attaches to the crankshaft had turned blue from heat. - There was no fuel filter on it before. But i now saw there is an internal fuel filter in the gastank, can it affect the vacuum if you now have 2 fuel filters. Please help me. Regards Andree.
@stanley3647
@stanley3647 3 года назад
Fuel consumption is a good point. My Yamaha scooter is 90-110MPG, 125cc engine and 9kW
@mopedmessiah
@mopedmessiah 3 года назад
My sisters bf had a 50 that he gave to me. It blew literally every bulb at the same time. All of them 😂. So i just took em all off and im running leds. Doing kinda the opposite of you, going balls to the wall with a 52mm big bore kit and all supporting mods to see what you can really get out of these 50s. Made me smile to see Goldie again though 😌
@thomasdsmith7678
@thomasdsmith7678 8 месяцев назад
Thanks for the video series. I know it may be an illusion, but it looks like there is an in-line fuel filter on the crankcase ventilator tube and none coming down from the fuel tank.
@redlinesandfuntimes
@redlinesandfuntimes 11 месяцев назад
I have a yongfu that I was given and it’s AWESOME
@MrHugemoth
@MrHugemoth 2 года назад
Interesting to see some real data on the little scooter. After riding a Lifan 200 motorcycle for over 50,000 miles with no engine issues I bought a Chinese 170cc scooter with a Lifan EFI engine.
@billyjoeperkins8145
@billyjoeperkins8145 Год назад
what is the name brand of your scoot
@marcs4091
@marcs4091 3 года назад
Food for thought, how cool would I engine swap vidio be with a utility engine. 79cc predator, 79 Lifan. Something like that or maybe even go a little bigger like a 120cc Honda or Lafan. 212 Predator would be scary fast but maybe Overkill.
@arnaudcordier8690
@arnaudcordier8690 3 года назад
Nice camera improvement
@ragehd2002
@ragehd2002 3 года назад
leovince hm titan is one of the best exhaust for this moped you can get it has all the things you need but it has a reduction in the exhaust manifold
@kennethsimbapuppyeyes6857
@kennethsimbapuppyeyes6857 7 дней назад
I did mine to try to fix stuck float (oil in gas trying to track down) use a drywall screw to make an indent tap and turn some depot machine screw 0.7 5mm
@demetriustyus2856
@demetriustyus2856 3 года назад
Long time watcher 1st time poster lol. I have the same scooter you have and installed a bbk (72cc). Can you recommend jets to start with? Should I get a bigger carb or stick with the stock 50cc carb?
@UpInSmoke54
@UpInSmoke54 10 месяцев назад
Jetson's bubble cars! 🤣 17:34
@DAGREATBOOG
@DAGREATBOOG 9 месяцев назад
Thank you
@Mgrovijahn
@Mgrovijahn 3 года назад
Little PoTaoTao. Haha Perfect nickname.
@luciog526
@luciog526 2 года назад
I put a big bore kit on my Tao Tao seems to bog like maybe to much air or not shifting right. Would you recommend bigger jetting?
@thehotrodguyskai2377
@thehotrodguyskai2377 3 года назад
Ive had the float bowl off mine before i don't remember it having tamper proof screws, lexmoto scout 49 but its the same
@jodycornelius8258
@jodycornelius8258 3 года назад
If you want to run 45+ mph do the 80cc kit. Big difference on acceleration. Just get a good quality kit. Or you can try some performance variator and clutch.
@lbmcconnell
@lbmcconnell 3 года назад
Help, running out of options. I needed to clean my carb. The Pilot Jet, is it supposed to allow for a needle to pass through it? I understand that it may be easier to replace it but really want to use what I have.
@markn2393
@markn2393 4 месяца назад
My factory airbox on my taotao broke off where it meets the carburetor. Finally fogured out my air leak carb issue
@rpdigital17
@rpdigital17 2 года назад
SIze is a size, but it is important to know also the jet thread size. Is it M4 or M5 you can only check by measuring the jet thread with a caliper.
@thedaydreamer7972
@thedaydreamer7972 2 года назад
Nice Video, I got my hands on a 50cc chinese Tao lookin scooter, I replaced the carb with amazon 18mm special and cone intake along with blue CDI,,, the main jet was a 78, I incrementaly increased it so far to 85 and it keeps getting faster with no bogs in the main jet or top speed, I live in the heat at sea level, whats the best way to keep getting more speed, can I just keep increasing the jet size until I have issues then back off? GPS has seen 42MPH, next is exhaust,,,,, TY again
@thubb3628
@thubb3628 3 года назад
You're adjustments on the valves for the 50cc. Is that the same adjustment for 150cc?
@christopheraldridge6477
@christopheraldridge6477 3 года назад
I always wondered how they get the float bowl screws in the carb tight from factory
@Scooter_911
@Scooter_911 3 года назад
They actually are special break-away screws. They have a regular hex drive head on them initially but when they bottom out they keep tightening them until they snap the drive head off. Leaving behind a "tamper proof" fastener
@roythearcher
@roythearcher Год назад
2000Kms and the exhaust drops off? Thats some quality welding right there!...
@markzimmerman7279
@markzimmerman7279 3 года назад
If it's burning out headlight bulbs make sure your voltage regulator is grounded properly.
@Mizfitvidz
@Mizfitvidz 3 года назад
Nice scooter im restoring mine im almost finished im having trouble with my turn signals I've been trying to find a video that shows how to swap out a wiring harness but no luck
@madhatterentmt6146
@madhatterentmt6146 2 года назад
the tamper proof jokes just earned you a sub lmaooo
@Yenkna_PCs
@Yenkna_PCs 3 года назад
You could only go 30 MPH before your upgrades? My Icebear Minicruzzer went 37 MPH before mods. I installed a cold air intake filter and it went up to 38 MPH.
@mattparker9726
@mattparker9726 3 года назад
about dang time.
@billrimmer5596
@billrimmer5596 3 года назад
It would really b nice to c u take a Genuine Buddy, I think u have one, and install fuel injection on it. Perhaps measure the performance before by doing a few 0-40 times runs before and after. Thank u for all your hard work. Looking forward to the next video.
@03flhtcui
@03flhtcui 2 года назад
I’ve enjoyed watching your video series on the Tao Tao, but I noticed there haven’t been any recent videos. Do you still have the scooter? Have you given up on it? By the way, sharing the Google Doc with all the repairs, maintenance and expenses was a fantastic idea.
@sammymontano1202
@sammymontano1202 2 года назад
Super helpful information, but I do have some questions. I’m 100% new too 150cc scooters and I just bought myself one today. I want longevity and reliability so my question is should I upgrade any parts (exhaust, intake) or is it better off stock, and what oil should I use or any tips I should be aware of. Mine is a roguestar 150 Chinese I’m assuming
@sammymontano1202
@sammymontano1202 2 года назад
And another question is how far can I go? I can top it out at around 50mph. But I wonder if I can make a 60 mile round trip or is that too much. And since it’s air cooled can they overheat on a drive like that?
@Tony770jr
@Tony770jr 3 года назад
So what's next? Just normal riding? Any other mods or upgrades?
@11bayrat
@11bayrat Год назад
Is there a muffler to make a 50cc quiet and not give up any power that can breathe??I want the best of both??
@toplistcrew7645
@toplistcrew7645 2 года назад
Quick question??? How would the exhaust work if I just cut the canister in half, or a third, or cut the smaller end tip off? Idk if that would even matter or if the smaller tube recirculates inside the canister… I just wanted an opinion from a pro.
@ronturner1345
@ronturner1345 3 года назад
Hi Garrett Question How long does a scooter last 10,000 miles?
@Scooterswapshop
@Scooterswapshop 2 года назад
we dont see any scooter swap shop stickers on that box we need to change that!!
@gageturner3274
@gageturner3274 3 года назад
I was wondering what you think of air cooled 300cc chinese scooters they are cheaper and larger cc tend to last longer but do you see them with many miles? 300cc is large i would fear buying it thinking it would have to work easy(last longer) but it melts itself by burning so hot without decent cooling?
@rafaelcardona1927
@rafaelcardona1927 2 года назад
hey garret .great vids by the way.i have a Q.i have the "performance" exhaust aswell a pod air filter.i put a 88 main jet and tuned it if its still running lean should i go up next size?size 90?
@rafaelcardona1927
@rafaelcardona1927 2 года назад
1 more question.and how long do u typically wait to check the spark plug after making idle and mixture screw adjustments?.thanks🤝
@FLOWGAMING21
@FLOWGAMING21 3 года назад
What size jet would you recommend if I have a mini bike exhaust on my tao tao thunder 50cc
@kevinthorn9672
@kevinthorn9672 2 года назад
I have a rx50 wolf scooter 50cc/49cc since its been sittn it in the winter and also i have no garage to store it since i live in a apartment.ive ride it everyday to work but now it seems to be going bad does the winter rain snow effect mopeds?
@shellilogan771
@shellilogan771 3 года назад
oH GARRET!! if i were 30 years younger? id be hunting you down! hahaha! you are definitely my guy! I have not seen a mechanic since the 70s when I was in high school and my first boyfriend in 1977 who was a tuneup Masters Pro, could look at a spark plug and tell you what was going on with the engine or carburetor in a bike or car!!! you're too young to know that tune-up Masters technicians were considered professional mechanics back in the 70s lol! I love your wit and your smarts!! and yes living with two taotaos has been rough, but I believe that if I can't fix something then I don't need it! lol.
@stewhaefner5775
@stewhaefner5775 10 месяцев назад
I got a hi pro carb for my TaoTao zummer but it's going about 50 mph now should I swap it it bogs down going up hill though so I'm thinking putting the hi pro on it'll stop the bog down what would you do like your channel btw
Далее
Chinese Scooter Carb Main Jet upgrade
22:41
Просмотров 25 тыс.
10 GY6 Performance Mods YOU MUST KNOW!
28:34
Просмотров 1 млн
DIY Gy6 Scooter 50cc to 100cc Kit
44:21
Просмотров 777 тыс.