PTC Creo Simulate

Подписаться 3 тыс.

Просмотров 86 тыс.

50% 1

Creo Simulate, integrated closely with Creo Parametric, has comprehensive FEA (finite element analysis) capabilities to handle thermal and structural analysis. Simply apply your constraints, loads and forces, and the software gives you the results. Change inputs as you wish and continue on the road to your best product., integrated closely with Creo Parametric, has comprehensive FEA (finite element analysis) capabilities to handle thermal and structural analysis. Simply apply your constraints, loads and forces, and the software gives you the results. Change inputs as you wish and continue on the road to your best product.
For more information, contact productONE:
Tel: +27 12 673 9300 / 9311
Support line: 0860 756 4357
Fax: +27 12 654 2838
Email: info@prodone.com or marketing@prodone.com
Website: www.prodone.com

Наука

Опубликовано:

28 ноя 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@vladimirmendoza6866 4 года назад

I agree with justingt3rs, the force is in one direction and I think it would be applied in the flat surface where the back of the chair rests; the bolt holes are only fixing points; but the explanation of the software is very clear, it has helped me in the way of using the software, thank you.

@shubhamwatke3171 5 лет назад

nice work sir.. this will definitely helps me in my final year project...

@pazhanisamy7294 3 года назад

Nice work. Many of us will be happy if you post a video on creo assembly simulations (with different constraints), interfaces-bonded,contact.. (when and where to use)

@Lewberry 3 года назад

helpful! thanks for the tips!

@alvaror.3878 3 года назад

You just saved our final project, thanks, you the goat

@productONESolutions 3 года назад

Glad to hear it! I would love to hear more about your project.

@alvaror.3878 3 года назад

@@productONESolutions we had to build a station with a robotic arm to produce wooden tables, pick them from a conveyer belt, sand it, attach the legs and place it on another conveyer belt, and we had to do be able to change the exit conveyer belt after 10 produced tables and keep switching every 10 tables.

@vikalpluthra5404 3 года назад

Thank you for this video. Can you please upload a material non linear case study too?

@quinnquynguyen8129 5 лет назад

Good afternoon, thank you very much for putting this together. Does the free student version of Creo 5.0 come with Simulate? On both Creo Parametric and Creo Simulate, it said I do not have access, but I wanted to confirm with you if I didn't miss something.

@faiyazmalik7570 5 лет назад

nice one

@zainabal-araje8900 4 года назад

Thanks, If I have multilayer PCB with coating layer? HOW analyses?

@sandeepkumarparal 4 года назад

How can I put moment and load simultaneously in that particular part?

@mehdi_2c 3 года назад

why did you put a couple there for load?! is there a pivot between those 4 holes on the mating part?

@aadityarajshinde3469 Год назад

I am trying to do simulation for a lifting tool. I am applying 'pin' constraint at the lifting point & i am allowing the rotation for it. When I try to simulate the result i get an error that says - "The model is insufficiently constrained for the analysis. Please review the element connections, properties, and constraints in highlighted entities. If this is a modal analysis, then you may be able to obtain a solution by requesting additional modes." how to solve this?

@gorgiyk4414 3 года назад

How to get safety factor simulate? Most usable factor in FEA.

@prathameshpatil2540 5 лет назад

Can you simulate the forces acting on a wheelchair when it is moving on stairs with a 60kg person on it??

@autocadcreo4988 4 года назад

Pls. Zoom the demo sir.

@pravinaher4720 3 года назад

Can you show CREO simulation on assemblies where we can define different Joints and simulate

@productONESolutions 3 года назад

Thank you Pravin, this is a great suggestions. I will be doing a video addressing that in future

@justingt3rs 5 лет назад

i dont agree with your moment load, the force are all in one direction

@user-zz4yg7xx9b 4 года назад

me too.

@Nicolans90 3 года назад

I agree with you. He should have set all the forces towards one direction, then he should have added a torque on the upper side of the plate to take into account the distance of the application point of the force