Puddle Lights Retrofit BMW F30/31 - Entry Light/Under Door Light 

There is probably no way to pass it through because there is a plug blocking the opening. Also this dude is too ignorant to reply to people who need help after watching his video's after a year.

Hi. I source those pins from junk yards from any BMW or MINI vehicle. But you can get them from BMW or AliExpress

Hi. I have ZB10_High. I don't have a PN for the 4-Pin connectors, just go on the AliExpress and search for: "BMW 4 Pin connector" and you will find it very easy.

He won't reply, he's too ignorant for that. Uploads a vid helps 3 people in the comments and then gives his biggest middle finger to those who come here after a year and need help too.

Hi. Pinout is same for F20 as well, and yes, you need to code 763 option.

Ace320 thank you again . Iv got everything ordered , looking forward to getting started . How do you code a specific option? Can it be done through bimmercode? If so which option do you turn on as I can’t find where s763 is? After this I’m going to try coping your great door handle retrofit video . 👍

@@lbdmuir9568 Coding is done by BMW Program called "E-Sys" "E-Sys - Installation Instructions - v.16.pdf" (E-Sys Installation & Setup Guide): mega.nz/#!Ih5R1KjD!LQJ8Jlqhdkmth_JHx1MxiBcjg6ixr5glsCnI0iQ7PsI E-Sys.rar (Includes E-Sys v.3.27.1 & Guides): mega.nz/#!sghQGBaJ!Ftf10Z18Qc_j7ybq_KoMYJZHIq1NCXhmwD3kZtJDHDs v.4.21.12_PSdZData_Lite: mega.nz/#!YxR2EQJK!eDF2oededfPOqhHd27-8TqB_Wp2Ru_pyZNpb8Q9d3Ws

Ace320 thanks again . Your a ⭐️

Hey Did you find how to do this? I am going to try retrofiring door handle light to my car in the weekend and will like to know some insights :)

Ciprian Radut hey , i did the mirrors , you need to follow what he doiong in video and be carful and every thing will be good, do you have all what you need? tools , pins, wires ?? good luck , you need a time :)

@@hamdandaralghoul7054 i think i have everything i need :D will see this weekend how things are going.

It is possible, but it's very costly and time consuming. Beside heated seats, you also need new climate control unit (with heated seats button). New wiring harnes and coding skils.

@@Acelele320 Sorry to bother you again but I would like to retrofit the lci radio trim that lights up, but because I don't the light package as standard there isn't a small LED that I can tap into to connect the lci radio trim to. Any advice would be appreciated.

Thanks. With Footwell Light retrofit, I can only help you with a wiring diagram. My car came pre-equipped with footwell light. Here is the link with wiring diagram image: i.imgur.com/zUXoCXg.jpg It's a 4-Pin connector. Pin 1: Ground (Connect it anywhere in the car to any brown wire) Pin 2: Footwell Light - Connect to FEM: A173*9B = Pin 54 Pin 3: Ambient Light (Red Light) - Connect to FEM: A173*9B = Pin 51 Pin 4: Ambient Light (White Light) - Connect to FEM: A173*9B = Pin 50 You will need to code 763 option, once coded, you can retrofit full light package, no need to each time code 763, once is enough.

Thank you so much. Where did tou find the 4 pin socket?

@@christos1984 You can buy it from BMW, online on AliExpress or from any scrapyard, you can find those connectors at any BMW or Mini vehicles.

Ace320 Hey Ace, my car doesn‘t have the 9b connection on the FEM. The 9b slot is empty. Can i retrofit?

Ace320 Hi, what is the 763 option? Can‘t find it!!