PUTTING A MOTOR ON MY KMART BIKE 

Oi Greg I've got a great idea! Disguise the fuel tank as a water bottle mounted in a bottle cage!

"Im definitely going to take it easy" * *Shreds an old Fireroad with jumps at like 20mp/h.*

It's only bogging cause you're running 16:1 for the break in, go through a tank and then jump up to 32:1, as for the fuel tank, its just leaky. For the choke take that black part off and there should be a 8mm bolt and tighten that and you wont have any dramas

Break-in period of 2.5 seconds then hits a 10 foot jump...adrenaline kicks in and throttle gets pinned. This is gold! Mate you sure live in the right place for this sort of thing!

I love the lack of safety precautions. I can relate so much because of that.

pull out the spark plug and see what it looks like, depending on how it looks, move the clip on the carburettor up or down. You should run these engines at a 40:1 ratio so change the ratio to that before tuning the carb

Aussie engineering at its finest! Really enjoyed seeing this come to life. Thanks for sharing.

I think that the fuel to air mixture is set wrong on the carb and also ride the clutch a bit coming out of corners let the engine rev up than drop the clutch but it looks good mate!

Once it’s broken in you should run it on a 40:1 mix and use a Ngk spark plug for a chainsaw

I should be revising rn, but couldn't wait when I saw this vid

That brake rotor idea is bloody genius man!! Might want to run the brake rotor in the reverse rotation to account for the forces changing from stopping to going! Just an idea I had while watching along! Sick work brudda

I'm so early that the video is still in 144p

You need to break the engine in for it to go fast

This is sick ahaha I was thinking of doing this but now I definitely will love your content man we will be uploading similar videos to u ur really inspirational! We r Aussie too 👍🏼

I think you should make a berm after the wooden kicker so you can have pump track on the way back to hit the jumps that would be sick

Great job Greg the bike has been changed so well good job 👍😀😃

Absolutely stoked on another good video bro keep smashing them out!

Awesome vid as always, should be able to get more more off the bottom power by mixing the fuel a bit more lean like 30:1 and just give it a clutch kick out of the corners will also help a lot

What a mad lad

wow, nice little build. wish I had a place like that to ride mine

I was watching your dirt jump videos. Some advice on the concrete mix. Just buy cement, not concrete. Mix it about 3 shovels of sifted dirt to one shovel of cement. Add water a bit at a time until it's like soft serve icecream. Try to make the top few inches of each jump with that mixture. Try making a big sieve the size of a hula hoop with wire mesh, don't pinch your mum's one again. Standard brick mortar mix is 3 parts sand to 1 part cement, so you don't need much cement in the mix.

I just bought an 80cc motor kit for my mountain bike I'm from Pennsylvania so I'm really stoked I really enjoyed watching you build it put it together I mean nothing looks like a really rips through the Outback or the countryside looks like you're in Australia. Lot of land out there the bike that you got looks like it's topping out at like 55 mile an hour that's pretty good so I'm just hoping that the engine kid I got Mouse up to my mountain bike I guess it's standard but you have to improvise so I liked watching you solve those problems that was pretty cool yeah man keep making videos dude I enjoyed it I like the GoPro that was awesome

Grey does everything! He can do it all

Yes bro brought a new phone 4 days ago haven't watch a youtube video yet cuase i wanted to make my first video watch made from you and ive already watch all off your old videos on my old phone keen as

When its reving really low feather the clutch and itll get into the power

That mod you did for the rear sprocket is brilliant. I've got the same issue. Thanks for sharing this great idea....

Nice video. You should hunt around for a fuel tank that fits inside your frame, to make it look nicer.

*Got pluged in circular saw on the ground* *put it back on the table bear footed with slippers* « Oh yeah mate, bit skeatchy hey? »

Really enjoyed this! Always wondered what those little motors were about. Seeing now that you have to really think it through for it to run long at all.

2 in the morning, still gonna watch!

So wholesome, like the Bob Ross of shredding bikes. Keep it up man, love it!

I clicked this over sam pilgrim video and this is literally the coolest video i have ever seen in my life

I cant beleaf how much knowlage you have keep up the quality content

I use that exact Huffy frame I swear it's the best for motorized bikes everything fits perfect

Best youtube channel handsdown, keep it up 👍

Yes Greg loving the crazy things your doing bro keep up the good work my dude

Aussie of the year, Greg Barling

Your videos are so good!!! Been subscribed for a while and love watching your videos. Keep going!

when he done a skid and says that was sick and laughs at himself ahahahahaha

Greg knows what he's doing

Dw if it looks sketchy all motorized bikes r sketchy man😂😂

Lol bro this is hilarious, when I saw the title I thought "no Greg, dont do it" but man that was a laugh to watch you shred that thing. You ride that thing faster than I can ride my dirtbike 😂

You need to adjust the carby screw thats why it is slow

oh no hes at it again

The chock issue if you take off the air filter “that black thing behind the carby” it’s to Phillips heads to take that off then there’s a 8 mm bolt tighten that up and it will stop the chock coming down

wow finally someone that doesn't do a montage through the hole thing

19:38 "ill probably take it pretty easy because we gotta break the engine in"... Well that was all instantly forgotten about :)

So sick man imma buy another kit now you've got me keen as!

Great vid man really original too with solid editing

This is going to be my guide to my front suspention kmart mountain bike. going to take off crank set from my bmx, and chuck on moto bars, made a fast road bike one. now for 80 cc jump bike

This shiz looks like mad max lol

Great stuff Mate! Enjoyed that. Two thumbs up!

You would love a dirt bike man. Perfect for where you live. You could make sick as tracks

Watch TravisTutorial here on RU-vid. He explains how a carb works and how to tune it. He has a Bing carb which is a simple carb. It will run down the basics in great detail but be easy to apply to any carb. By the sounds of it yours is running rich. Good for break ins... but too rich can prolong the rings seating process. Its also limiting the RPM range right now, which is needed for the break in process. By the sounds of yours you will prob benefit from some jetting and needle jet adjustments. Learn what "plug chops" are and invest the 35 bucks in a Cylinder Head Temp Gauge (CHT) its a pretty basic but good form of engine monitoring.

Hey Dude what's up Here's a couple of tricks I learned of That will help out these little motors And any motor really ----(1) To get more speed and more power You can open-up the spark plug gap from the recommended .025 to .033 -.035 And this will allow the spark to linger longer in the combustion chamber , before grounding out And this will hence allow the spark to ignite more fuel in the cylinder , and give the engine more higher combustion (more power) .... ----(2) And if you increase your 2 cycle oil mix to 10 ounces of two cycle oil mix , per 1 Gallon of gasoline And by doing this you will get better lubrication on the inside of the engine Hence giving you less heat And a cooler running engine .... ----(3) And another thing you can do Is put little holes on the back of the plastic , of the air filter holder So that you can get more air into the carburator And have a better acceleration (more and better air flow) ---(4) And the last thing which I haven't tried yet (but I'm going to) Is to connect a long rubber tube (hose that can handle heat) between the carburator and the intake (about 6 - 8 inches long) And this is supposed to allow the engine to get a better engine idle adjustment (when adjusting the idle) Because it allows the (air and fuel) mixture To have more time to blend better Before reaching and entering the combustion chamber And hence giving you a better and smoother running engine .......P.S. Those are some Kick-Ass hills your jumping I don't have those kinds of guts that it takes to jump them hills But hey keep riding on And Y'all Stay Safe over there And God Bless !!! 👍

Grate video man I reckon if you mixed the fule at 30:1 it would rev up quicker

the camera focus it 10/10 😂

Turn the mixture adjustment screw clockwise and test it,also only 1/8

Broooo it looks mad fun where ya live

love how its a long vid keep going with the amazing work

Looks sick can’t wait to see more videos

That’s sick! But you should build some flow trails in the area you were riding the motorcycle on, and make a video series on it! That would be cool!

Cool track ! Looks like fun!!!

i recommend keeping the bike chain on because if you’re out riding and something happens you can just ride home

Hey Greg sick video, thing looks wicked! Could you link the kit you purchased for this build?

Greg you're mental! I love it!

surely a restoration video on the jumps at 23:12

No holding back that was dope

YEEEW

Legend status achieved

Mine is just a cruiser, but those jumps were pretty freaking boss!

Such a good video can’t wait for the next

If you take the baffle bit out of the exhaust it gives it a bit more power

Sick video dude u deserve more subs

This is how a motorised pedal bike ment to be ridden

You should have at least 200k subscribers! Keep doing videos!

I feel good about you, no matter how you feel about the bike . Amen brother from Australia . I’m from Salt Lake City . Utah . Say hello .

That is the best thing I’ve ever seen, now I want to get one of those. Could you suggest me a brand

Can't wait to see the modifications, that was sick man

Mad..! Realest mtb channel there is

That is so cool u should do wheelies on it

This is freaking awesome!!

Loved the vid !!!! Amazing content and can’t wait to see the roller video

Did you put in a better gasket on the tank cap to keep petrol in? And did you try tin-snips or heavy duty sheers for cutting tough stuff ?

that accent... love it

That on a duel shock bike would be awesome

keep smashing your vids bro they are so sick

The location where you live is awesome 👌

Looks so sketchy but how u performed on the jumps were clean

damn that thing can shredd!

Aha sick video bro. Loved the point of view GoPro clips 🤙🏼

Im definitely get an 80cc motor for my mountain bike. Hopefully it fits

such a good video man 🔥🔥🔥

this video was so sick greg

I wish I knew about those secret dirt jumps when I was up that way last time... there’s bloody nothing up that way for mtbs

I admit, I would not have the balls to jump those jumps on that thing!

What a legend

ive had many of these kits pull the carby back half a inch and the carby should have a clip on the golden throttle pin put the clip on the top slot and it should fly

Iv been first 6 videos in a row, your killing it man 💕🔥

That's pretty well the high way