PVS-69 Gen 4 introduction 

Convert your 14s to ALPHAS

@@vonscherfarms925 I also have a set of 14s, and I'm currently running a 3d printed panobridge. What would be the benefit of switching to alphas?

@@Ready17lighter weight but beyond that if you like your setup then keep it

Have no idea how to do this. Getting the tools to do this stuff is a big part and who knows if one is able to do it. Pvs 31 and Gpnvg would be cool to do too. The thing is it's really hard to do these things without step by step constant ongoing and restarting course.

I just watch 2 videos and i learn more than in the last 2 years ahah

I wouldn’t expect them to ever come because my friend paid and never got them it’s been 6 months

MX-69 is in tandem with the ALPHA

i’m pretty sure walking with him is really easy I just one dude who posted like a minute and a half video of him just walking out in the woods and I mean with no IR only like 25% noon he could see just fine and he could walk with him the field of view is pretty good. It seems like I’m not sure cause you can’t really tell through camera. But you can definitely see where you’re going and that’s definitely a plus for being around 500 bucks to build yourself 400 if you get really lucky.

pass thanks tho

They would have to be MX10160 not sure you can get those as GEN1 but you can get Chinese NNVT-4 gen2+ for like $800 a tube

i actually do plan to pop a thermal core in one im sure it would fit. overlay is a totally different beast and not really supported with the video signal we are using.

@@vonscherfarms925 you can do it via ghosting, but it's not exactly a pretty solution. You basically run both inputs into the same monitor, with a sliding resistance switch (like a dimmer switch on lights) on each. Gives you control over which signal is dominant, and even the ability to run one or the other.

@@BuckFoeJiden are you sure that works with CVBS? all the information i found says that combining them just makes static

@@vonscherfarms925 I'm not 100%, but I see no reason why it wouldn't as long as the signal isn't overpowering the inputs ability to read the signal. From everything I've done in AV, signal strength is the biggest factor. That's why the dimmer switches are important. Try it with two regular camera inputs and see if you can get them to ghost, assuming you have the sliding resistance switches to wire it up.

@@vonscherfarms925 the only foreseeable problem I can come up with would be figuring out exactly how to splice the inputs into the monitor. I'd imagine if you're using something like a raspberry pi to feed the stream into your monocular, you'd need to run two boards. One for your digital camera, and another for the thermal sensor, then a sliding resistance switch behind each board, and from the switches, they'd be spliced together into the monitor. I'm sure there's info out there on how to ghost video signals that's more up to date or accurate, though.

I get them from alibaba

@@vonscherfarms925 any chance me a link please?

Vonscherfarms.com

It’s extremely hard to see in the video but there are actually holes for some key rings but squeeze out from the printer filled them in a bit

It’s entirely possible but not something I’m interested in doing

You save your ass off for years

The entire infantry uses PVS14 monoculars . Only special forces groups get duel tubes so I'd say that's good enough for most civilians and you can pick up used gen 3 omni builds for 2 grand all day .

I have not tried pairing them and I’m unsure how that would perform. I know that it would really fuck with your eyes as the aspect ratio wouldn’t be exactly the same. I advise against it

@@vonscherfarms925 do you think you'll be able to compare the g4 with the opsin? I think the opsin looks very promising, but for the money it seems like you might as well save and go analog.

@@TierNoneOperator the latency in sionyx would always make it a no go in my book. A member in the discord did some testing of a sionyx black and they’re pretty close in terms of detection capability.

@@vonscherfarms925 the new opsin has 90fps with moonlight or an illuminator though, so seems like that has been fixed. The black was definitely an action camera that worked well in low light whereas the opsin is meant to be a true helmet worn device.

@@TierNoneOperator latency is different from fps, latency refers to the time a frame is captured to the time that exact frame is displayed. As far as I know sionyx has still not fixed this issue.

There’s a significant weight savings, much narrower fov with Much less fisheye

@@vonscherfarms925 would wider fov be better for a more realistic pov? I have no experience with real nvgs, just amazon digital cheap stuff

@@taxijackmusic standard fov of a analog is 40 degrees. Pushing the fov wider eventually causes distortion

I’ve been waiting for some MJF housings

1900 gets you a housing with digital tubes and PVS-14 eye pieces. Other companies charge 1700 for just the housing…

@@vonscherfarms925 Thanks, just want to mention that usually this is a problem with how nowdays fan\passionate\players general non pro stuff is communicated to public. If one comes in the shop and tries to understand something all is nice and described well, but it's hard to understand stuff that a noob would like to know: is it fully working what I buy, how do I see (yes this is show in some pictures of the lenses), do I connect this stuff to a battery pack? It's more a web site for a very small niche of people who know already 90% of the NVG etc. And maybe that's what you want it to be. After all this is not airsoft stuff it's real deal, real steel owners stuff. I am just trying to understand how to build one but there is a huge quantity of tools to be bought too which inflate the price and then zero manuality ... I wish to make a pvs 31 like and a gpnvg in the future. An maker that has shown in a video how to make a pvs (digital camera) not like yours also has included a camera recording capability. Thanks.

Swap the tubes and objectives

@@vonscherfarms925 Oh nice, only I think I've discovered one little problem.... I live in Australia someone on your discord said you don't/can't ship the build kits to Australia is this true? can you ship the pre-built digital? Cheers m8

No I have a life proof case lol

Yeah it already is

You sure can

Others have done something similar

@@vonscherfarms925 also I was prowling thru the GitHub and I couldn’t find the monocular version. Are the files still available?

@@BRadFPV0227 I never made one there’s files floating around in the discord and odd sea thiu

Actually did away with the buck because they couldn’t handle the power draw of the digital tubes

If you build it with a digital tube, you will use an analog FPV camera

The kits sold will be MJF

It’s already out

⁠@@vonscherfarms925so on your website alpha 2 is the gen 4? I am sorry I am extremely new, a bit confusing

Yeah

Yes. The lens guy I’ve been working with has now packaged the lens for the DIIT in the same format as a PVS-14 lens so with those two things you could convert a PVS-14 or other units

Check out my webstore vonscherfarms.com

I have preorders open for completed MJF sets

@@vonscherfarms925 ok, thanks!

@@vonscherfarms925 hey man, I sent you an email a couple days ago about payment on the waffle for the pvs69. If I choose cash, does that let me use pp or cash app or?

@@mojoegunner5115 I don’t see an email from you? And yes

If you’re in the discord group someone made an adapter file set to use the V760 eye piece. It’s in the pvs-69-files channel

@@vonscherfarms925 cool thanks man