No video :(

PZEM-015 Calibration & Setup Tutorial (TAGALOG with English Subtitle)

Подписаться 68 тыс.

Просмотров 44 тыс.

50% 1

PZEM-015 Tutorial of how to set it up and calibrate based on either your battery bank or inverter HVD, high voltage disconnect and LVD, low voltage disconnect to have the "SOC or DOD bar indicator" appear properly. Also adjusting "Current" based on the shunt that comes with it.
Installation Video Tutorial: • How To Install PZEM-01...
My actual applications of this tiny little thing.
Capacity Test of my battery bank: • Capacity Test of My DI...
Solar Panel Production Monitor: • 2nd BMS Installed + So...
Please watch the whole video. There are instructions you need to know than just how to calibrate it. Like, how to clear or reset the accumulated energy, Ah (amp hour) and running time, needed when you conduct a capacity test on your battery bank.
Note: When you buy this thing, a diagram comes along with it plus, it is also printed on its back.
============================
BUY LINKS:
Bangood - bit.ly/2HNguM4
Aliexpress - bit.ly/2TKjafD
Shopee - bit.ly/3kTdYSs
Ebay - ebay.to/3kQv83g
Lazada - bit.ly/2HY8Iib
IMPORTANT INFO:
For product reviews, ad plugins, sponsorship, and collaboration, please contact me via my RU-vid email address.
============================
CONTACT, JOIN & FOLLOW:
☕️ My Facebook Page: / jflegaspivlog
☕️ Personal Facebook Account: / jflegaspi77
☕ RU-vid email: / jflegaspi
☕️ Instagram: / jflegaspivlog
☕️ Join My FB Group: / lithiumpowerphilippines
============================
PLAYLIST:
Solar Setup Tutorials - cutt.ly/iCRq9wc
Solar Charge Controllers - cutt.ly/PCRwYce
C-rate & Cells - cutt.ly/1CRwGwQ
Modules, SSR & ATS - cutt.ly/SCRwVTC
Portable Solar Generator - cutt.ly/tCRewBq
DIY Power Wall - cutt.ly/4CRelyY
Reaction Videos - cutt.ly/uCReQST
Safety Devices - cutt.ly/eCReOCq
My Travel Videos - cutt.ly/sCReX3n
============================
SOMETHING TO MEDITATE:
Galatians 6:7-8
Be not deceived; God is not mocked: for whatsoever a man soweth, that shall he also reap.
Proverbs 3:27
Withhold not good from them to whom it is due, when it is in the power of thine hand to do it.
Philippians 4:8
Finally, brethren, whatsoever things are true, whatsoever things are honest, whatsoever things are just, whatsoever things are pure, whatsoever things are lovely, whatsoever things are of good report; if there be any virtue, and if there be any praise, think on these things.
============================
#jflegaspivlog #jflegaspisolar #lithiumpowerphilippines

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 219

@JFLegaspi 3 года назад

Here are my actual applications of this tiny little thing. Capacity Test of my battery bank: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qv1EDdSKGOc.html Solar Panel Production Monitor: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HFhOvRGVYkE.html Installation Video Tutorial: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j99XDktCNbw.html

@lebronmalakas8685 3 года назад

Sir accurate b yan sa mah?

@blogskiesdiyprojectssolare8634 2 года назад

hi sir nice video..pano po ba ito e-coconnect between SCC and battery po? para malaman ilang amps ang pumupunta sa battery..pwede ka po ba gumawa ng video about sa pag connect?

@jhoncliffordavenido1435 Год назад

hello po sir @JFLegaspi ..ask po ako sir kung ilang volts po ba dapat e set sa low voltage ng 32650 lifepo4 60ah po sir.. maraming salamat..

@blindbandit010 28 дней назад

sa lahat ng tutorial sa PZEM-015 na napanood ko itong kay sir JF talaga pinaka clear. salamat po sa video tutorial sir!

@kgpcodes 2 года назад

Hello Sir. Na-setup ko sya. Very useful for 2 big powerwalls I built. Sobrang mahal na ngayon nung PZEM 015. Last year mura bili ko. I am finalizing 2 powerwalls para ready na sa bagyo next time. Salamat sa video!

@JFLegaspi 2 года назад

Enjoy building your project and always keep in mind, safety first above all. 🤓 👍

@kgpcodes 2 года назад

Ang new project ko 12V 300 AH na powerwall. Natapos ko na yung 48V kanina. Install ko na lang PZEM 015. Ang mahirap talaga eh paano mo lilinisan yung wiring sa dami nung wires. Kelangan ko pahabain mga wires. Sobrang dami gagawin din. Pero sana matapos ko next week. Malaking tulong mga video nyo.

@JFLegaspi 2 года назад

Enjoy building your project and always keep in mind, safety first above all. 🤓 👍

@henrysmith8094 3 года назад

Best video for understanding these cheap battery monitors! I wondered why my battery read 100% SOC all the time until I found it was set to 1.3v.

@loneranger3739 3 года назад

Salamat Sir JF for accommodating our request. More power and God bless po. Salamat rin sa shout out. - Pau

@JFLegaspi 3 года назад

Good day Lone Ranger 😊 you are welcome. Salamat din sa suporta. 👍 God bless. 🙏

@jacfruitsplants 3 года назад

Thanks Sir ,For the good idea,More power...

@douglasmorris8364 Год назад

Thank you sir. Clearest help yet.

@JFLegaspi Год назад

You are welcome po 😊👍

@johndaneestevez4623 3 года назад

Ito ung inaabangan ko sir JF hehe claro pa kay recto ...soon ikakabit ko rin ung ganito ko...salamat for sharing ur ideas sa mga vlogs mo always keep it up..

@JFLegaspi 3 года назад

Salamat John 😊👍 God bless 🙏

@akocmamo5772 3 года назад

ayun. may bago na uli. tagal kita inabangan sir.

@JFLegaspi 3 года назад

😊 Good day sir John.. meron pang isa video. Salamat. 🙏

@akocmamo5772 3 года назад

@@JFLegaspi cge sir aabangan ko.. kakatapos lng panoodin ung bago

@philippinediypowerwall3852 3 года назад

Hi sir JF Legaspi. ngayon lang uli napadaan sa channel mo. good to see u have parameter setting tutorial for pzem-015. isa kc sya sa mga magandang device to monitor ur battery soc. hindi sya kamahalan and gaya nga ng sabi mo its not that really accurate but fair enough na rin for the price. ung mga mas accurate kc na battery monitor will cost u 2x or even 4x the price. More power sir to ur channel and syempre looking forward to see more of good content here on ur channel. God bless sir JF

@JFLegaspi 3 года назад

Yes, I totally agree, Sa presyo ng device na eto ay mas malaki ang pakinabang kesa ibinayad sa pagbili ko neto. Nice having you back in the comment section bro. 😊 God bless. 🙏

@philippinediypowerwall3852 3 года назад

@@JFLegaspi yes correct sir. almost all the data u need is in there with this inexpensive device. thanks for welcoming me back sir d2 sa channel mo. paunti unti dalaw tayo sa mga channel ng friends natin d2 sa yt. God bless sir

@peace7267 2 года назад

thank you so much you really didn't miss bits like most youtubers clear and simple God bless you too

@taskforceagila4427 3 года назад

Wow Sir.... Nice to Marami talaga akong ma tutunan sayo

@JFLegaspi 3 года назад

Salamat sa panonood Philip. 😊 👍

@taskforceagila4427 3 года назад

@@JFLegaspi your welcome sir.. Nka abang ako palagi sa bago mo video

@mnocum16 3 года назад

Good day sir! Tamang-tama balak ko na umorder ng ganyan, sir.

@JFLegaspi 3 года назад

Good day Mike 😊👍 perfect timing. Makatulong sana ang videong eto. 🙏

@formalejo 3 года назад

thank you sir JF sa muling pag-Share ng Idea.👍

@JFLegaspi 3 года назад

You are welcome Marlon 😊 👍 Salamat din sa panonood at suporta.

@formalejo 3 года назад

@@JFLegaspi gusto rin po kitang bigyan ng commendation sa pagiging maganda, malinis at simple ang presentation.😁

@JFLegaspi 3 года назад

@Marlon Formalejo I humbled by your comment. Thank you and God bless. 🙏

@undergod1987 3 года назад

Thank you thank you.. I couldn't find my manual for this

@JFLegaspi 3 года назад

You are welcome. 😊 Glad this helps. 👍

@patrikgo4107 2 года назад

Salamat sa shared knowledge, more power and God bless

@JFLegaspi 2 года назад

Wala pong anuman sir P. 🤓 God bless.

@COLOMBOAGENCIES 2 года назад

Thanks good video with clear instructions.

@MarkDeKruyter 3 года назад

Thank you; best video I found on this.....!!!!

@jongcureg1026 3 года назад

Thank you 😊 prof. JF

@JFLegaspi 3 года назад

You are welcome 😊 👍

@freshersofbose456 Месяц назад

Dose it measure 2 way current direction. I mean both charging and discharging current? Plz reply

@ricardorellones6404 3 года назад

Sir salamat po ng marami god bless po

@JFLegaspi 3 года назад

Salamat din po at God bless. 😊 🙏

@diomelinoeusebio233 Год назад

Thank you sir.

@wilfredolibrinca9425 2 года назад

Salamat sir jf..

@drawingtravellers9872 2 года назад

Salamat sa info sir...

@whyyouasking9744 2 года назад

Thank you!

@joseelcurioso5215 3 года назад

Good video my friend new suscriber👍📈

@JFLegaspi 3 года назад

Thank you 😊 and blessings 🙏

@Ojames600 3 года назад

Thank you very much, this video really helped. Appreciate it

@JFLegaspi 3 года назад

😊👍🙏

@tibor304 2 года назад

perfekt!!!!!!!!!!!

@JFLegaspi 2 года назад

😊👍

@edgarsazon3110 Год назад

Thanks!

@JFLegaspi Год назад

Salamat sa pang ☕😊👍

@seda14us 3 года назад

Thank you...

@JFLegaspi 3 года назад

You are welcome. 🤓 👍

@400tf 3 года назад

Good day po sir, bakit po d nalabas ung internal resistance sa display ko, I followed all your instructions thank you more power

@JFLegaspi 3 года назад

Good day JV 😊 makikita yan sa tuwing may active load or during charging 👍

@dennis.teevee 3 года назад

Thank you! The Chinglish manual it came with didn't make sense to me lol.

@JFLegaspi 3 года назад

You are welcome 😊👍

@reynaldomercado497 2 года назад

Good day sir,anu po dapat na settings sa battery meter na hvd at lvd,ang battery ko po ay sealed lead acid 12 volts,wala pong inverter..thanks and more power

@JFLegaspi 2 года назад

Good day. Pwede pong HVD ay 12.7 at 11.8V naman ang LVD.

@jimmycondedelatorre1152 Год назад

Para sa lvtopsun lifepo4 12.8v 100ah sir anu mas ok iset na lvd at hvd sir

@mendreizoltan4311 2 года назад

How I calibrate my PZEM-015 to any resistance shunt, as I figured out with my peak voltage I had set to 29.4V: 1. Remove the PZEM-015's back cover. 2. Insert a short circuiting jumper wire into the two, 0.1 inch distanced, designed holes on the PCB. 3. Feed the PZEM-015 energy meter with a precisely adjusted 20V voltage from a bench supply. 4. Run through my shunt resistor a precisely adjusted current to one tenth of the current's full scale, that is 5A at 50A full scale, through my desired milliohms shunt, flowing from another bench supply. (The shunt's outputs must be connected to the meter's current measurement inputs.) 5. PZEM-015 should display 20.0V and 1/10*FS current (5.00A if the set Full Scale was 50A) as primary variables, equal to the reference values. 6. Shunt calibration done, I disconnect the jumper. After this the PZEM-015 can be used normally. The power-up cycle of the PZEM015 must happen with the jumper already put on in order to calibrate the scale. Good luck!

@JFLegaspi 2 года назад

Good day. The best way to do it is make your own tutorial video regarding this, and post it in your channel. You could help a lot of people if you do it the right way.

@mendreizoltan4311 2 года назад

@@JFLegaspi Thank you. :-)

@danielsolabo3340 3 года назад

Thnks sir..

@JFLegaspi 3 года назад

You are welcome 😊👍

@hellovlogwelcometomyguyz5040 Год назад

Sir ano po yung 15.5 na voltage settings? full charge po ba ng battery or floating voltage nya?

@jhoncliffordavenido1435 Год назад

hello po sir @JFLegaspi ..ask po ako sir kung ilang volts po ba dapat e set sa low voltage ng 32650 lifepo4 60ah po sir.. maraming salamat..

@JFLegaspi Год назад

Ang 80% DO ay nasa 3.2V per cell at ang 90% ay nasa 3V.

@jhoncliffordavenido1435 Год назад

@@JFLegaspi maraming salamat po sir

@pinoycalibrationmaster Год назад

Salamat po, Resbak naman

@JFLegaspi Год назад

😊👍

@jhongalejos3254 Год назад

Sir JF,ano po bang set voltage ng high at low para sa led acid battery?hindo ko po kc mapalabas ung soc bar nya.tnx po

@JFLegaspi Год назад

Ang high voltage settings ng PZEM-015 ay may isa pang digit sa pinaka-una, dapat 0 (zero) kundi, hindi talaga lalabas ang SOC bars sa display. Pakibalikan mo ang tutorial at huwag magmadali at mag-skip sa panonood.

@jhongalejos3254 Год назад

@@JFLegaspi thank you sir.binalikan ko nga ulit ung video nu sir. ung zero nga po tlga sa unahan ang dko nailagay kaya pla ganun.slamat ulit sir

@JFLegaspi Год назад

@@jhongalejos3254 😊👍

@jhongalejos3254 Год назад

sir, yan po bang pzem applicable po b xa khit anung battery?or much preferably sa lithium lng sir?thanks po sir

@JFLegaspi Год назад

Kahit po lead acid deep cycle battery, pwede po yan. 😊👍

@jhongalejos3254 Год назад

@@JFLegaspi thank you po ulit sir.Godbless

@timyong6152 2 года назад

Sir JF pa clarify naman po, medyo confused lng ako sa capacity display. Akala ko ksi pinapakita nito ang capacity ng battery bank na nka kabit sa monitor. Pero as I observed, zero sya upon configuration, then tumataas habang umaandar ang load. Ano po tlga ang minemeasure ng capacity sa pzem015? Salamat po

@JFLegaspi 2 года назад

Good day. Hindi po capacity ang nasa display. Ah po yan na maaring nadiskarga kung naka-install ito sa DC output side o naipasok kung naka-install ito sa dc input side.

@timyong6152 2 года назад

@@JFLegaspi maraming salamat po sa pagsagot.. mabuhay po kayo!

@ronelduran2663 2 года назад

Prop. Blue carbon 48v system ano po Ang LVD at hvd nito. Salamat!

@JFLegaspi 2 года назад

Good day po. Pwede pong 47V para mas tumagal ang lifecycle ng battery bank. 🤓👍

@mnocum16 3 года назад

saka pala sir pwede ko ba lagyan ito ng switch para kung kailan lang ako magcheck ng battery ay dun lang gagana, naretain ba nya data kapag naka off matagal?

@JFLegaspi 3 года назад

Pwedeng switch yan button nyan, as long as naka konekta sa power source, yes. 👍

@sammytammy2921 2 года назад

Sir JF, ang batt bank ko po ia 32650. Nilagay ko si PZEM after ng buck con kasi 12V system ako. In effect, laging 12V ang V ko. So mali po, di ba? Dapat ilagay ko siya before dumaan sa buck con, tama po ba?

@JFLegaspi 2 года назад

Good day. 🤓 Tama naman kung ang gusto mong sukain na amperahe ay ang papasok. Yong red and black wiire ng PZEM 015 ay dapat sa battery bank naka konekta para sa tamang voltage reading. 👍

@stephenshop4946 Год назад

Sir, yung internal resistance for battery netong pzem-015 accurate ba?

@bebelynmojica4089 3 года назад

Sir good afternoon my inorder n ko ng ganyan item multifunctional meter, nalilito lng po regarding s SHUNT kung un negative output ng ssc punta battery ay dadaan po muna ng shunt or pwede po direct battery po?marami po salamat

@JFLegaspi 3 года назад

Good day B. Ang pinaka simpleng paliwanag ay ganito. Yong negative line ng SCC papuntang battery bank, putulin mo sa gitna at doon mo isingit ang shunt. (Illustration lang ha) 😊 Eto ang link ng video tutorial ko kung paano mag install eto. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j99XDktCNbw.html

@bebelynmojica4089 3 года назад

@@JFLegaspi thank you very much sir,.stay safe

@Nightmaree760 2 года назад

Sir ang gamit kung pzem 015 chunt 100amps ang setting ba ay 100amps din sa pzem?

@JFLegaspi 2 года назад

Good day, opo. 😊👍

@Nightmaree760 2 года назад

@@JFLegaspi last nlng po sir, sa pzem yong yellow wire po ba ikabit sa itaas ng chunt at sa baba yong kulay blue wire ? Sa video nyo kc sa bigeners guide 1 ang blue wire ay nsa itaas tpos yellow wire nsa baba ng chunt

@sadfur8728 2 года назад

Are there any schematics of the PZEM-015 available anywhere? I have one that got blown, I think it it didn't like the connection to the current shunt using a BMS when it cut power and opened up the P- from the B-. The current shunt inputs need to be at ground, and when they floated up to the rails, it got fried. Now I notice the MXM11P62 8-bit RISC microcontroller with 24-BIT ADC gets warm just with 5V power applied.

@JFLegaspi 2 года назад

Good day. I have not found a diagram of it and mostly, since it’s very cheap, I don’t bother fixing but rather buy a new one.

@mnocum16 3 года назад

Sir wala bang epekto sa reading kapag medyo mataas masyado yung ampere ng shunt, nacheck ko kasi dun sa markings ng shunt ay 200 pero binili ko sa 100a lang. ang initial load ko lang naman sa gagawin ko ay 7 led lights na 10watts at 5 electric fan na 65watts pero mga 12 hours or more sila nakabukas. Kasi dito sa tutorial mo kapag naiset mo lang yung taman shunt na nakalagay ay ok na?

@mnocum16 3 года назад

ito lang naman ang matagal nakabukas ng magdamag sa bahay at charging lang 5 cellphone.

@JFLegaspi 3 года назад

Sa parameter settings bro under “Current”, i set mo lang kung ilang amps yong shunt na binili mo. Kung 100A, ilagay mo lang din sa 100A yong current settings. 😊👍

@ethanroslinq 3 года назад

Tanong lang po, ano poanghigh voltage disconnect ng snat 12v 2000w po? Maraming salamat po

@JFLegaspi 3 года назад

Good day. 🤓 Ang sagot sa tanong mo ay nakasulat sa manual or specs ng inverter. Kung walang kasamang manual ang inverter, paki search sa website ng manufacturer. 👍

@ethanroslinq 2 года назад

@@JFLegaspi Maraming salamat po sir at God bless!

@phillipbagtas4487 3 года назад

Sir pwede ko ba to gamitin khit wla ako solar? Gusto kc sana ma monitor ung kunsumo nmin sa aircon split type.

@JFLegaspi 3 года назад

Pwede po eto kung galing sa battery bank (DC) at kung galing naman sa DU (distribution utility) ay AC naman po yon, PZEM-022 ang dapat nyong gamitin. 😊 👍

@phillipbagtas4487 3 года назад

Salamat sir! 😁

@phillipbagtas4487 3 года назад

Mganda kc yan sir my running time

@JFLegaspi 3 года назад

@@phillipbagtas4487 Yan din ang isa sa nagustuhan ko dyan. 👍

@wallysoberano9598 3 года назад

Sir bakit d po kayo nagamait ng ibang battery katolad ng lifepo4? Gawa din po sana kayo ng video about lifepo4.

@JFLegaspi 3 года назад

Omorder na ako kaso hanggang ngayon ay wala pa dahil sa covid, lockdown na naman dito ngayon. 😊

@wallysoberano9598 3 года назад

Ah ok po sir.. abangan ko pa yan.. Godbless po..

@cliffolandag4582 3 года назад

Tanong lang sir san ka bumili ng morang used battery

@JFLegaspi 3 года назад

Good day Cliff. 😊 Dati ay sa ebay ako namimili, sa ngayon ay may local seller akong nakilala dito sa amin na mas mura.

@cliffolandag4582 3 года назад

Thank you sir

@rafs_tamiya 3 года назад

Sir JF ganito din po b gamit nyo sa solar pannel going to SCC

@JFLegaspi 3 года назад

Good day Rafs. Yes, yan ang naka-install sa power wall ko bago pumasok sa charge controller. 😊 👍

@JunryLoguiber 6 месяцев назад

Paano ang sitting po

@kabwisitavlogs9131 3 года назад

Pashout out po 💕

@JFLegaspi 3 года назад

Good day 😊 👍 Sure sa next video. 🙏

@JonathanVallero 11 месяцев назад

Boss un shunt ko 100a so sa 100 current ko ba ilagay salamat.

@JFLegaspi 10 месяцев назад

Dapat gamit ka ng mas mataas pa na shunt, kung hindi iinit ang shunt, maraming losses.

@cryptotraderandminer2932 Год назад

Sir Ano high voltage Ng 100ah lifepo4 at low voltage gayahin q lang b pag set m s 15?

@JFLegaspi Год назад

14.6V sa high at ang low ay depende sa DOD percentage na gusto mo. Halimbawa 11.8V or 12V.

@cryptotraderandminer2932 Год назад

@@JFLegaspi salamat sir marami n set qna mabuhay Po kau sir God bless u

@cryptotraderandminer2932 Год назад

Sir tanung qlang pzem ko Sabi Ng charger full charge n xa kaso sa pzem ND pa full 70% palang at 13.5v nakalagay s display nya

@JFLegaspi Год назад

@@cryptotraderandminer2932 pagkapuno ng LiFePO4 battery bank sa Q14.6V ay bababa po yan talaga sa voltage na yan, kung mgabokd stock o used cells yan ay mas mababa pa. Normal lang na ganyan ang boltahe.

@neevanatienza4610 Год назад

Hello po sir JF from batangas hello sa inyu jan..tatanong lng po mejo nlilito ako kung ano ilalagay ko sa high voltage lead acid po kc ung batt ko, pag ka charged ko palo xa ng 13.3 v.pero pg nalipasan ng ilang oras nbaba xa ng 12.9v alin po jan gagamitin ko hehe.13 po ba o ung 12.salamat po sanay mapnasin nio..

@JFLegaspi Год назад

Good day. Ang fully charged resting voltage lead acid deep cycle battery ay nasa 12.6V to 12.8V. Yan dapat ang naka-set sa high voltage ng PZEM-015. 😊👍

@neevanatienza4610 Год назад

@@JFLegaspi Maraming salamat po sa inyu 🥰🥰

@reynaldjover2187 10 месяцев назад

sir JF, yung battery coulometer po ba same function nitong PZEM 015? TIA

@JFLegaspi 10 месяцев назад

Halos pareho 😊👍

@reynaldjover2187 10 месяцев назад

thank you sir@@JFLegaspi

@CardingMagaloyan Год назад

Sir paano kung 3s configuration 12.6v ang maximum. 12.6 pa rin ba ang ilalagay sa voltage setting? Or 15.5 gaya ng setting sa 4s? Sagutin mo sana salamat idol😊

@JFLegaspi 11 месяцев назад

Good day. Kung 3S Li-ion cells, dapat 12.6V lang ang charging voltage. Delikado kapag sobra pa dyan. 😊👍

@moneth08able Год назад

Yan bang low voltage at high voltage para sa lead acid dapat naka ress mode sya d b?

@JFLegaspi Год назад

Ano ba ang ress mode?

@moneth08able Год назад

@@JFLegaspi no load not charging

@moneth08able Год назад

Rest

@JFLegaspi Год назад

low voltage ay dapat ibase sa cut-off voltage ngbattery pero mas mainam kung ibase ito sa kung ilang percent ang DOD% ng inyong battery bank.

@earlregala6284 2 года назад

Toto po ba sir na pag naka standby mode (screen off) si pzem 015, hindi po sya nag a capture ng data?

@JFLegaspi 2 года назад

Good day. Hindi ko pa po nasubukan dahil hindi ko naman ino-off ang PZEM-015 na gamit ko.

@rameltenga4522 3 года назад

sir,, sa 8s na battery monitor maganda po ba ang PZEM-015?

@JFLegaspi 3 года назад

Good day Ram El. Pwede pero walang indvidual voltage of per pack/parallel. Total voltage lang. Ang recommended application neto ay input monitor of solar production, output consumption monitor at capacity testing. 😊 👍 Eto ang mga video link: Capacity Test of my battery bank: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qv1EDdSKGOc.html Solar Panel Production Monitor: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HFhOvRGVYkE.html

@rameltenga4522 3 года назад

@@JFLegaspi marami pong salamt sir. god bless

@JFLegaspi 3 года назад

@@rameltenga4522 God bless 😊🙏

@EngineerDIY 3 года назад

Thanks Sir.. Pwede po ba ito as monitoring of charging? Di po ba masisira?

@jrmr6282 3 года назад

how do you reset it to factory settings, I really off set mine.

@JFLegaspi 3 года назад

The entire video is just all about that. Take time to watch and activate subtitle for english. 😊👍

@motojormac42 Год назад

Tanong lang po kung para saan po yun shunt? Salamat

@JFLegaspi Год назад

Hindi kaya ng PZEM-015 na sukatin ang high current kung walang shunt. Eto ay masusunog. Sa shunt dumadaloy ang nasusukat na current ng PZEM-015

@jesussaves1599 3 года назад

I have this PZEM 015 monitor and I've set everything but the SOC always shows at one bar or 10% on the battery symbol. Have I wired it incorrectly?

@JFLegaspi 3 года назад

You must have set the high voltage incorrectly. Leave the first digit from the left to zero.

@jesussaves1599 3 года назад

@@JFLegaspi I set the high voltage at 013.5V.

@JFLegaspi 3 года назад

And you also need to set the low voltage 😊👍

@jesussaves1599 3 года назад

@@JFLegaspi It turned out to be one of the micro wire ends was not fully seated into the unit at the back. You have to push hard on the button tabs all the way down and make sure the wires are contacting properly inside. Works great now.

@JFLegaspi 3 года назад

Good to know it's working now. 😊 👍

@AniManiac1990 Год назад

nababasa ba jan ung harvest ng wattage sa isang araw?

@JFLegaspi Год назад

Yes, isa yan sa mga functions ng PZEM-015 😊👍

@AniManiac1990 Год назад

@@JFLegaspi SIR solid follower mo po ako ask ko lang. ung ginawa mo nilagyan mo BMS no need naba lagyan ng balancer un?

@peterjaphet9645 Год назад

pwede kaya to lagyan ng data logger sir?

@JFLegaspi Год назад

Hindi pwede 😊

@normansale1542 3 года назад

Pwd po ba to sa car battery sir??

@JFLegaspi 3 года назад

Pwede 😊👍

@resjandonero2221 Год назад

sir JF good say po nakabili nko neto pwede po ba gamitin ang 4 awg na silicon wire dyan sa pzem 015 ikonek ko from battery to 1000watt psw 80amps po circuit breaker na gamit ko.. gusto ko po kasi malaman capacity ng batery ko with load.. may kabilisan na kasi malowbat ang battery ko.. sir jf mas higher amps po ba ang silicon wire na 4 awg kysa dc/pv cable na 4 awg? confuse po ako sa amps ng dalawang klasi ng wires na same gauge silicon vs dc cable.. pahelp nman sir

@JFLegaspi Год назад

Good day. Ang 4awg na silicone wire ay maaring nakakapag-handle ng 180A depende sa quality neto. Mas mataas ang current handling neto kompara sa ordinaryong mga wires.

@resjandonero2221 Год назад

@@JFLegaspi maraming salamat po sir JF sa clarification neto.. god bless po..

@jerucruz5110 3 года назад

Newbie question sir naka bili po ako ng PZEM-015 kaso ang kasama nyang shunt is 200amp pwede ko po ba i set sa mababang amp ang battery tester kahit 200amp shunt ang gamit??? Wala po bang magiging problema??? Salamat ng marami sir godbless po

@JFLegaspi 3 года назад

Good day. 🤓 Dapat kung ilang amps ang shunt ay ganun din ang sa parameter setting. Panoorin ng buo ang video, binaggit ko yan. 👍

@xyronneencinares891 3 года назад

Pwede din po ba yan gamitin sa gel type sld?

@JFLegaspi 3 года назад

Yes, pwede 😊👍

@edwinespenido8407 3 года назад

Sir jef positive and negative busbar ang kasama nya?

@JFLegaspi 3 года назад

Good day Edwin 😊 Wala erong kasamang busbar ang meron lang ay maliliit na wire for connectios at shunt. 👍 eto ang video tutorial kung paano iinstall. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j99XDktCNbw.html

@edwinespenido8407 3 года назад

Ah ok sir salamat mabilis ka mag rply salamat

@rhuuu199x 3 года назад

sir, kung ma o-off po ba yung wattmeter, madadala or marerecord parin po ba yung previous readings or automatically po magrerestart?

@JFLegaspi 3 года назад

Naka stored pa din, maliban na lang kung i-reset. 😊 👍

@josechristianaraza6173 3 года назад

Good day po Sir JF. mAh po yung unit of measurement ng Ampere. Puwede po ba yun maging Ah instead of mAh?

@JFLegaspi 3 года назад

Ang count ay nagsisimula sa mAh paakyat hanggang maging Ah. 😊 👍

@josechristianaraza6173 3 года назад

@@JFLegaspi maraming salamat po. God Bless.

@marvinantenor2171 3 года назад

Kapag bibili Po nito pzem 015 ay nkabase sa gmit n battery bank o sa inverter

@JFLegaspi 3 года назад

Ang PZEM -015 ay pwede pang monitor sa papasok na current, halimbawa mula solar charge controller papuntang battery bank o di kaya mula battery bank papuntang iinverter o load para mamonitor naman ang konsumo. Para naman ma-monitor ang AC load, mula sa inverter to load, PZEM 022 ang kailangan.

@marvinantenor2171 3 года назад

@@JFLegaspi ok sir thanks po

@JFLegaspi 3 года назад

@@marvinantenor2171 walang anuman 😊👍

@becongcabahug7016 3 года назад

anong po ang ng yari sa pzem-015 nag calibrate ako bigla nalang nag block out. ma repair po ba ito? salamat po.

@JFLegaspi 3 года назад

Good day B. 😊 Maaring deffective ang module. Pwede mong kontakin ang seller kung under warranty pa yan. Unfortunately, not worth it para i repair yan. 👍

@jickelssilvosa4481 2 года назад

sir jp normal po s shant ng zem015 100am uminit po pag 20amps pataas po

@JFLegaspi 2 года назад

Hindi dapat. Kung 100A ang shunt at umiinit, ito ang mga dahilan. Una, baka maluwang ang turnilyo ng shunt. Kung hindi maluwang baka yong terminal ng wire ay maliit lang. Pangalawa, yong wire size, baka hindi rated for 20A.

@jickelssilvosa4481 2 года назад

@@JFLegaspi malaki nmn po ung wire sir ung wire s wilding machine ang ginamit q ska subra higpit po nia pro pag umabot po xa ng 20amps uminit c shunt lalo n po pag 30amps d mo n xa mhawan ng mgtagal c shunt s subra init sir

@jickelssilvosa4481 2 года назад

@@JFLegaspi sir jf maraming slmat po s advice mo skin ok n po problima q d n po uminit c shunt s burbar pla manipis po uminit kya dinoble q po ngyn n d xa uminit pti c shunt ok n po maraming slamat po sir godblessyou

@JFLegaspi 2 года назад

Wala pong anuman 😊👍

@rjaysari-sari2649 3 года назад

#JFLmoresubs2021

@JFLegaspi 3 года назад

Entry confirmed ✅

@markglenllovit2291 3 года назад

#jflmoresubs2021

@JFLegaspi 3 года назад

Entry confirmed ✅

@pinoycalibrationmaster Год назад

Paresbak naman sakin master

@JFLegaspi Год назад

Good day. Anong resbak? 😊👍

@gienav0992 2 года назад

Yung sakin nyan namatay lang bigla dina gumana

@JFLegaspi 2 года назад

👍

@mnocum16 3 года назад

sori sir nakalimutan ko white na nga pala yung table dito, hahahaha.

@JFLegaspi 3 года назад

Haha Bro Mike, no need to be sorry 😀👍 no worries. Salamat salamat. 🙏

@maktapselectronics 3 года назад

May Diagram ka po pahinge po

@JFLegaspi 3 года назад

Good day Mark. 😊 👍 Eto ang tutorial paano ang pag install: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j99XDktCNbw.html May diagram na din sa likod mismo ng unit.

@maktapselectronics 3 года назад

Salamat master

@amazingfred2585 3 года назад

Kala ko on off lang yun botton 😂

@JFLegaspi 3 года назад

Tricky nga talaga ang pag setup neto. 😊 👍

@jericki.valdez5523 3 года назад

Good day sir, accurate din ba ung bars ng battery?

@JFLegaspi 3 года назад

Good day 😊 for its price, pwede na. 👍

@jericki.valdez5523 3 года назад

@@JFLegaspi salamat sir

@boris3d843 2 года назад

Помедленнее пожалуйста, я записываю...

@JFLegaspi 2 года назад

Добрый день. Вы смотрите записанное видео. Единственный способ замедлить это - скорость воспроизведения плеера RU-vid. Good day. You are watching a recorded video. The only way to slow it down is through RU-vid's player playback speed.

@falbala435 Год назад

I bought it and disappointed. The SOC is fake it's only an estimation based on the battery voltage, not current as it should. Plus it only counts the current while discharging, not charging, so the displayed value is also false if you charge the battery while using it (which most of the time is the case). Useless gadget.

@JFLegaspi Год назад

It works fine with me, though it might not be the most accurate module out there. 😊👍

3 года назад

way not speak English

@JFLegaspi 3 года назад

Well, I could if I would. (please enable subtitle) 😊 It’s basically for my fellow Filipinos who are more comfortable watching tutorial videos in our own native tongue. There will be an english subtitle for this video in a few days from now. Watch for it. Thanks for watching and God bless. 🙏😊

@stephenshop4946 Год назад

Sir, pwede ba itong Pzem-015 pang replace sa lvd module kasi may cut off voltage siya?

@JFLegaspi Год назад

Mahkaiba ang function ng dalawa, monitoring module ang pzem-015 samantanlang ang lvd ay voltage sensing module. Hindi pwede.