Quadmula DJIN25 Review - Spicing Things Up

Подписаться 10 тыс.

Просмотров 7 тыс.

50% 1

First drone I've owned that isn't a 5 inch haha. Thanks for checking out the video and I hope you've enjoyed :)
The Build:
Frame - Quadmula DJIN F25 Split
Motors - RCinPOWER Smoox 1404 2750kv
ESC - Foxeer Reaper 45a
FC - Foxeer F722 V4 Mini (MPU6000)
Video System - DJI o3 Air Unit
Receiver - Happymodel ep2
AUW - 286g
-----------------------------------------------------
Special thanks to Quadmula, Gemfan, and Foxeer for keeping me in the air.
If you're interested in what Quadmula has to offer, below is an affiliate link to their website. This comes at no extra cost to you but rather helps me out a little :)
quadmula.com/?sca_ref=2755042...
-----------------------------------------------------
Rates: drive.google.com/file/d/1cxGS...
Instagram: / jevin_w
TikTok: www.tiktok.com/t/ZTdweW41d/
FaceBook: people/Jevin...
Outro: Infinite by Valence
• Valence - Infinite | F...
-----------------------------------------------------
Controller: Radiomaster TX16S (ExpressLRS Ranger Module and Happymodel EP1 Receiver)
Goggles: DJI FPV Goggles
Camera Angle: 30 degrees
Props: Gemfan 3s
Batteries I Prefer: Dogcom 1160mah 6S or Tattu R-Line 1050mah
Filmed on a GoPro 10 and DJI Action 2
0:00 Intro
0:25 What's make this frame unique
0:40 2.5in vs the 3in?
1:09 How much it weighs
1:31 Future update
1:51 Indoor Flight Test
2:11 Showcasing how quiet it is
3:08 Flying the DJIN25
7:29 Outro
#drone #fpv #fpvfreestyle #fpvdrone #change #gopro #dji

Развлечения

Опубликовано:

28 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@mstrout 6 месяцев назад

I REALLY want to see you shred this thing once it’s tuned!

@SlickNick3 7 месяцев назад

I’ve never seen someone rip a 2.5” like that nice job man 🤘🏻 watching you fly anything is great

@arial_01 6 месяцев назад

Face reveal! I like the review, its to the point and focuses on whats important on a mini quad. thanks!

@DINSTAAR-FPV 6 месяцев назад

Nice review. I'm looking forward to giving the frame a try. Right now, I'm flying the Volador 3.5 for my small build but looking to build a sub 250 drone. Take care. ✌🏾❤️

@seekfpv 7 месяцев назад

Sick whip bro 🚀

@vts5520i 7 месяцев назад

Great introductory video! Please try the presets"4.3 Filter settings for VERY CLEAN build with RPM FILTERING". This is the basic setting for Djinn F25. The prop wash issue will be resolved afterward.

@JevinW 7 месяцев назад

Oh okay cool. Ya I’ll definitely check that out thanks!

@KeeepTV 7 месяцев назад

do you know a good preset for the F3 too?

@kellywasden 6 месяцев назад

@@KeeepTV The Supafly preset works fantastic. I heard the UAV tech one also works great.

@KeeepTV 6 месяцев назад

@@kellywasden awesome, yeah just used the supafly preset together with their esc settings and am waiting for good weather for a test ride :)

@chrismillersrcfamily 6 месяцев назад

I absolutely love my F3. One day after me ordering the frame they released the 25 🤦‍♂️I will most build it next. I can’t decide if I want the f5 mini or the 25🤷‍♂️

@photosbyjames_ 2 месяца назад

you should give this thing another go using the gnb 380mah, ive been flying the gnb 650mah and it feels like a complete different drone going from 650 to 380, the weight makes a massive difference

@skychaser5591 7 месяцев назад

Nice review and very informative! This 2.5 inch could be a nice house/garden flyer! I'm curious about your experience with the 3 inch quadmula, heard some folkes like that one even better than the 5 inch. 🙂

@JevinW 7 месяцев назад

Appreciate it my man 👍 So I never actually built their 3in 😬 Possibly something to consider in the future though

@kellywasden 6 месяцев назад

The 3" can fly similar to the 5" but definitely not with smaller motors. I have the T Motor 1604 on my 3" siren and am considering trying out the 2004's as I have seen some youtubers do for more power. Either way, it's a smooth flight and very zippy!

@skychaser5591 6 месяцев назад

@@kellywasden Thnx for letting know! I think I gonna order two 3-inch frames and try one first with these T-motor 1604 2850KV so I can run it with 6S batteries instead of 4S. That way I probably can stay < 250 gr. With 2004 motors I think it's gonna be hard to stay < 250 but maybe I gonna try these anyways..... 😈😁

@JuicySmullietFPV 7 месяцев назад

I love my little 3" with 2004s and 4s. OI can only imagine how much fun a 6s version would be. Thanks for the video and zip your fly next time! LOL

@JevinW 7 месяцев назад

I was constantly zipping it 😂 Those cargo shorts are falling apart

@kellywasden 6 месяцев назад

Just put 1604's on my 3" and flies soo smooth. I think 6s makes a difference in overall power and less sag. Gonna throw on my 2004's and see if there's a noticeable difference. What size of 4s you have on it? I had 850's and I think it was just too heavy for the 4s.

@JuicySmullietFPV 6 месяцев назад

@@kellywasden that's wat I have with my 4s (GNB 850mah) but I have definitely not felt like it was underpowered. 2004 3000kv motors on 3s is definitely underpowered. I haven't tried 6s yet because I only have 1100 and 1300 batteries and that would be too much, I believe.

@Lemuel_FpV 6 месяцев назад

380 gnb’s are the ticket! I love my f3 6s with 03. Get around 3 min of freestyle. Used murdersfpv’s tune,…perfection

@GjurovskiFPV 6 месяцев назад

if you wanna more like 5 inch feel then try diferent motors, 1105 -1106- 1206 4500-5000kv (4s of course :D), and 3blade props, 1404 are bit wide and blocking a lot of thrust on 3blade props and 5 blade that you have from gemfan are utterly inefficient above 70% throttle and have a lot of drag..... I still didnt find 2,5 inch quad that flies like Geprc Phantom HD, but frame from phantom canot hold o3 camera :/

@DrFlathead 5 месяцев назад

Great video and awesome build... Honestly, I was disappointed with the power of my f25 on 6s with a build similar to yours. Then went to 4s on rcinpower 1207 5000kv (1207's are larger than 1404's) and at that kv on 4s youre looking at something like 15000 more rpm. So quite a bit more thrust, lighter batteries and more battery choices, and man, it punches out almost as hard as a powerful 5" but there's definitely more battery sag on 4s.

@LehtusBphree2flyFPV 6 месяцев назад

Try the 380mah 6S with less weight and try flying on 5 inch vanny rates on 4 blade props. I just got mine, and I love it way better than the bigger kwads.

@richardrodriguez2800 2 месяца назад

Flight time? I’m using 850 4s and I’m getting 🤢 flight time

@dominickeen6091 6 месяцев назад

What kv you got on your motors?

@arnaudbeasse1081 6 месяцев назад

It’s underpower because of you 6s… it’s insane for a 2.5. My Quadmula 4s’ s weight is 130g with o3 naked. No propwash for me.

@steigensonne 3 месяца назад

what battery size did you use for the djinn25?

@ederplays2788 5 месяцев назад

What is the price of the drone setup without the air unit?

@TrickyFPV420 6 месяцев назад

I am very curious to try this frame as I want to build something light, that I can flip around in spots where a 5" might be too tight or noisy. I love the fact that you get no props in view, however lots of people are saying that it feel very underpowered no matter what parts, 4s or 6s, etc you put in there. I know it will not fly as good as a regular 5", but is it really that heavy? You seem to be flipping it around pretty well. Other solution would be a 3", but the does not seem to be any frames available with no props in view and it kind of feel like it take away some of the purpose of the high quality footage that you can get from the o3...

@JevinW 6 месяцев назад

So I manage to get the weight down and tweaked the tune to make it fly a lot better. Learned a few things that could apply to folks looking to build this and I plan to include that in a video this weekend if the weather is decent.

@TrickyFPV420 6 месяцев назад

@@JevinW but in your opinion, do you think it is worth building on this platform, if I want something between a tiny whoop and a 5” for freestyle outdoors or should I go with f3 split and live with props in view?

@JevinW 6 месяцев назад

Go with the 3in with 2004 sized motors if you want something smaller with a 5in feel. 2.5in props just can’t create that 5in feel

@TrickyFPV420 6 месяцев назад

@@JevinW thanks!

@antoniogarrotesanchez2041 6 месяцев назад

i need that video soo interesting this quad@@JevinW

@crs768 7 месяцев назад

hell ya bro, great video. try 4s on it?

@JevinW 7 месяцев назад

Thank ya! So 4s would be too underpowered for my 2750kv motors. 4s voltage is more suited for 4500kv

@ahmetturan8292 5 месяцев назад

Why its shaking too much ?

@StrillLife 4 месяца назад

Oscillations... He mentioned it needs to be tuned. I used to like oscillations when I 1st got into the hobby. I felt like it was the equivalent of doing a burn out in a car. But I learned this was undesirable later due to the stress to the motors and components. An easy fix might be to limit the power output. But I'm sure he has a more sophisticated means of getting the power under control and making more efficient and smooth.