Expand for Full Description and Links: In this video, watch as I replace my clutch in my 1994 Jeep Wrangler YJ. I was having a rattle coming from underneath that sounded a lot like a bad throwout bearing. The rattle was only present when the clutch was released. As soon as I put a slight pressure on the clutch pedal, the sound would go away. I decided, since I was removing the transmission to gain access to the throwout bearing, that I would replace the clutch and all the other components in the area. After gaining access, my clutch ended up looking pretty good, so Im keeping it as a spare. The throwout bearing was trashed, as well as the pilot bearing was in pieces.
I used the following parts:
1. Luk Clutch Kit (included pressure plate, clutch plate, throwout bearing, pilot bearing, and clutch plate alignment tool. amzn.to/3E8SvR3
2. I also purchased an all metal throwout bearing because the one included with the Luk kit is 50% plastic and will fail. amzn.to/47jZsfn
3. Pivot Ball - for the clutch fork amzn.to/47tEta3
4. Luk Flywheel amzn.to/445v19P
5. I ordered a new clutch fork, but they were backordered, so I inspected and reused the one I had. amzn.to/3OPnhEo
I did not replace the master/slave, because it was recently done.
22 авг 2024
