"Quick fix" Cricut Roller Off Track Not Working 

You are that guy! I was about to go crazy. You are saving people's sanity one video at a time.

Thank you. My cricut joy was acting up. Since you did this video I realized that the front rollers were just not on track (I had to pull something out earlier.) You saved me man! Thank you so much.

My mother and I almost had to stop our project of putting something new and exciting on my water bottle. However, we discovered the roller was off track. but this video really swooped in and saved the day. Thank you for allowing us to continue our crafting adventure!!

This actually worked perfectly! I thought I'd needed to go out and buy another machine just to finish my orders but this should get me through. Ty!

The Phillips screwdriver was a LIFE SAVER! Thanks for posting! Best of luck to you.

What a lifesaver! Broke out my Cricut today for the first project in awhile and this issue happened! Your "trick" worked perfectly! Thanks so much!

You Rock! Thanks for showing us. My husband helped me fix it. I had to hold the bar up and he moved the wheel for me. Have a wonderful day and thanks again.

Thank you. I’ve been constantly sliding mine back over. It’s ridiculous that Cricut would sell something that cannot be repaired by a technician. Well I called about it they basically said that I just needed to buy a new machine. These things are not cheap.

Thank for this!!!!! I couldn't figure out why the roller wouldn't move watched you video and noticed mine had moved out of place!

Criicut knows this is a Design flaw . They don’t stand by the Products this is why I bought a scan and cut. Cricut is still selling this garbage. They should just stand by their products and not stick it to people. Now they offer a paid extended three-year warranty on stuff because they know this crap is gonna break. Shame on your cricut. You don’t work for Circut. You shouldn’t have to be a repairman but thank you so much for the video. I’ll send it to my niece who convinced me to buy a scan and cut instead of a cricut. 😮

I cried thinking I broke my machine. I saw some other videos n they didn't help. I found this one and omg thank youuuuu. U saved my maker!!!! 👍👍

A day after Father's Day, thought I was gone have to use my gift cards for a new Cricut! Thanks for this, fam.

Aye I was SPOOKED thinking it was over for my machine, thank you

Thank you so much! I was on my last cut for the day and was freaking out.

Thank you this helped alot I also saw in another video that someone use zip tie against the roller they said it work perfectly

Thank you! I didn't even realize my roller had slid about 1" off track.

Thank you, my right side was off track. You rock!

I used some foam double sided adhesive tape and hot glued it in place. Then I pushed the little white thing with the grooves up beside where the rubber was replaced with the tape and hot glued it there. Worked great, cost $1, and I didn’t have to take apart the machine.

You saved my cricut! I subscribed!!!

Thank you so much sir. It worked. I followed you instuctions and it works again. Thanks a million and God bless you.

It worked great. Thank you for the tip. I was going to buy a new machine not knowing the the wheel was off track.

Thank you!!! I almost went and bought a new machine.

Thank you! I'm surprised by the number of people saying they would replace their current machine with another Cricut.

Thank you this helped us solve the problem. Rubber wheel was not aligned correctly

Thank you for this video. I will definitely give lifting with a screwdriver to move the roller back into place. Thank you

Thank you so much for this content!! Lifesaver!!

Wow. This definitely worked. I was so close to tossing it, because I was not about to pay to get it fixed, but then I was like, let me stop by RU-vid University first, lol. Thanks for the video

Thank you, Thank you, Thank you! This is my 2nd maker with this same issue. They sent me a new Maker before but, it's been a few years ago now, so I'm on my own. Thanks again.

Thank you, although my cricut had a different problem, you helped me know how to lift the bar.

THANK YOU SO VERY MUCH. You are so smart!

LOVE THIS!! Thank you! You now have a new SUBSCRIBER!!!

Thank you! Life saver! I was getting ready to throw my cricut away 😊

Thank you! Just the leverage alone helped to fix it.

Thank you for posting this! Only video I found that helped me!

You are the best! This fixed my problem. Thank you so much!!!

Wonderful thanks so much

Thank you so Much, This helped out a lot!!!

i legit unscrewed the screws on the bottom thinking i could do something like that lmao 😂 luckily i found this before i did something completely stupid! thanks for the vid :)

Omg....thank you so much...thought my make was out of commission.

YOU ARE AMAZING!!! Everyone else said they had a problem but never a solution!!! THANK YOU!! The screwdriver REALLY helped!! #notallheroeswearcapes

Omg you just saved my life❤❤❤❤❤❤

AhHa! Cricut has a design flaw and didn't think to tell everyone who purchase this, that one; the dark rollers could slide off track. Two; those dark rollers would begin to wear down. Meaning, yo would need to replace them! I'm calling to voice a complaint on their expensive product! How dare you!

Thank you so much!! such a simple but lifesaver Idea!!! Godbless!

Thank you! I knew that rubber roller didn't look right!

That's the problem I'm having now...Thanks Bro!👍🏾

This totally saved us! Thank you 😊

Man you’re a life saver!!!! ❤

THANK YOU SO MUCH!!!!! This was so easy! You're a lifesaver!

Oh my gosh you just saved me, so smart thank you!!

Thank you for your advice it really help me.

Thank you so much!!!

Thank you!! You are a legend!

Thank you so much for this quick fix 😊

Really happy to find this

This worked perfectly!!!! Thank you so much!!

Thank you for this video it worked perfectly you saved me thank you so much

THANK YOU! You saved the day!

Problem resolved, thx

THANK YOU!!!!

Thanks for this! Was just having this issue!

Thank you!

This just saved me thank you so much!

Soooo helpful!

Omg that actually worked! Thank u!!!

Thank you !!!!

thanks mate!

thankyou thankyou thankyou!

So helpful! Thank you!!

Thank you bro!!!

Great tip. Have you had problems with the bearing coming off the other end of the roller?

I think we all have that issue and Cricut knew because we all got problems with that same right rubber thing. Mine ended up getting really loose now my thing is what if heat can actually make it shrink like steam.

If it wasn't for you posting this, I would have just tossed this into the trash, which probably a lot of ladies have. Sad and SMH!

Omg THANK YOUUUUUUUUU!!!!!!!!!

what do you recommend if that bar doesnt want to go up? I mine doesnt take any material ticker than a piece of paper.

olá tenho explore air 2 e ela está cortando só de um lado? Será que você poderia me ajudar? Obrigada

I used super glue. Do you know where i could get new rubbers? One of mines cracked. I think the girl i got it from had the same issue and didn't tell me 😒

Nice, let me go find my toolbox lol

This is the exact problem I'm having but the rubber piece won't move even when lifted with the screw driver

My Cricut cut the mat what's the problem

La solución es buena por el momento, pero la rueda se va a deformar 😢

So I wonder what are we supposed to do when it completely wears out!

Thank you!!!! You saved my commission and my sanity🥹

Question , download the new update now my cricut won’t load shapes , objects to canvas any ideas? Windows 10

hey! i think i ave a different problem, the roller does not turn, not the rubbers, the roller does not move :( its a new machine

que maquinas con materiales tan malos....

This is ridiculous come on cricut!!

The rollers will continue to disintegrate over time. For a more permanent solution rollers, tools, disassembly guides can be found here: facebook.com/SloffeeDesignz

You should have turned off the music with profanity. Kids may want to watch your video.

Is it possible to buy new rollers for the machine? I tried to look on the circuit website and was unsuccessful in what to do...