Fix or Repair Loose Threaded Bar Handle on Bissel Carpet Floor Sweeper
"Step-by-Step: Drilling Metal & Repairing Bissell Sweeper's Loose Handle"
0:05 Bissell Carpet Floor Sweeper Features
0:10 Loose Threaded Bar Handle - Probable root cause
0:20 Loose Threaded Bar Handle - Defect
0:30 Loose Threaded Bar Handle - Defect Profile
0:58 Retrofitted Loose Threaded Bar Handle - Bolt & Nuts
1:23 Repeat & Reproduce Retrofit on Other Threaded Connection Points
1:40 Feasibility & Risk Assessment
2:10 Operability - Bolts & Nuts
2:50 Clamp Connecting Rod Pieces
3:18 Measure Thread Length Center Locus
3:30 Mark up & Center Punch on Center Thread Locus
4:10 Select Scew & Drill Bit
5:30 Pilot Drill on Center Thread Locus Connection Points
8:00 Open Up Predrilled Holes to Final Size
9:40 Test Bolts Through Final Size Holes
9:50 Center Punch Opposite end & Dislodge Rod
10:05 Place Scrap Bit under Center Punch App end Hole
10:20 Clamp Connecting Rod
10:35 Drill through Opposite end Center Punched Rod Centre
11:05 Turn Rod over & Open up Final Size Hole
12:40 Flush Protusion with Hammer
12:50 Finish off cosmetic edges
13:00 Assemble Allen Bolt & Nut
13:35 Hand & Torque Tighten Bolt & Nut
14:05 Test Rigid Bolt & Nut Connection
16 окт 2024