Quick Uconnect Reset Guide: Dodge, Jeep, Ram, Chrysler 

Glad it helped! And saved you a trip!

Nope

Glad it worked out for you! Thanks for the comment 😄

Thanks a lot for your comment! 😄 I'm thrilled to hear that the tip worked well for your 2022 Dodge Charger. Drive safe and enjoy your Charger to the fullest!

@@CarlsCarCornerGOATED

Mines not working at all pushing top right corner and the volume and tube buttons won’t reset

Can i do that with Charger 2015 ??

Glad it helped

Glad it worked for you! 😀

Oh they would’ve seen you coming a mile away!😁😁😁

Glad I could help!

Glad it worked!

Glad it worked!

Glad it worked my friend!

@@CarlsCarCornerhelp mines just keeps turning the radio off when I try

I can’t get it down

Glad to hear it worked for you!

Haha, better late than never, right? 😄 That's the beauty of the RU-vid community - quick and helpful solutions at your fingertips. We're glad you found the video useful and could resolve the issue so swiftly. If you ever have more questions or need assistance in the future, don't hesitate to drop by. Happy motoring! 🚗🛠️

My stereo wasn't on my car my charger is a 2013 I got the stereo from a different car. I believe it was a 2012 charger

@@CarlsCarCornerIs there anyway to remove the horizontal line on the screen it just started happening 😢

@@CarlsCarCorner hii , when I put reverse my 2019 doses charger rt my rearview backup camera won’t work for some reason can you pls help , ima also try this rn

😁

😃

Thanks for the comment! I'm glad to hear the reset worked my friend! Stay tuned for more videos.

I tried on my 300 idk what I'm doing wrong

mines not working either i tried still didnt reser

I'm sorry to hear you're having trouble with the reset process on your Chrysler 300. Resetting Uconnect can vary depending on the vehicle model and software version. Here are some general tips that might help: 1. **Follow the Correct Steps:** Make sure you're following the reset steps for your specific Uconnect system version. Instructions can vary between models and model years. 2. **Check the Ignition:** In many cases, the ignition should be in the "Run" position (not started) when performing a reset. 3. **Confirm the Timing:** Sometimes, holding the buttons for a few seconds longer than you initially thought might be necessary. 4. **Battery Disconnect:** As a last resort, you can disconnect the car's battery for a few minutes and then reconnect it. This can reset the system but may also reset other settings in the car. If you're still experiencing issues, I'd recommend consulting your vehicle's manual for precise instructions or reaching out to Chrysler's customer support for specific guidance related to your Chrysler 300 model year. They should be able to provide you with accurate instructions to resolve the problem. Don't hesitate to ask if you have any more questions or need further assistance. Good luck! 🚗🔧

Mine too...

Glad to hear it worked! Stay tuned for more helpful videos! Appreciate the comment my friend

@CarlsCarCorner I definitely will, and you're welcome my friend.

Thank you so much for your support! 😊 We're delighted to have you as part of our community, and we look forward to bringing you more exciting content in the future. If you ever have suggestions or questions, feel free to reach out. Happy viewing! 📺👍

Glad it worked!

Glad it worked out!

Glad it worked!

Glad it helped!

Glad you liked the video! 😃

Glad it helped!!

Glad it helped

You're welcome! Glad it Helped!

You're welcome! Glad it helped!

Glad I could help!

@@CarlsCarCornermy audio media like pandora does not play when connected and paired . Calls work help!

Glad to hear it worked for you!

This isn’t working for me idk what to don

@@haydenryals7270same here have a 2021 Ram 1500 no Apple CarPlay for months

Glad it worked! Appreciate the comment. 😁

Glad it worked!

Glad it helped! Thanks for the comment!

Glad it worked!

You're very welcome! 🎉 I'm thrilled to hear that the reset worked on your work truck and that you're back to jamming. If you ever need more tips or assistance in the future, don't hesitate to reach out. Happy driving and enjoy the tunes! 🚗🎶

Glad it worked out! Thanks for your comment!

Thank you for the compliment my friend!

You're welcome!! Glad it worked Nicole

Glad it helped!

Glad to hear! 😀

Glad it helped!

Glad it worked!

Delighted to assist! Feel free to ask if you have any queries. Have a spook-tacular Halloween and enjoy the ride! 🎃🚗

Glad it worked out! Don't forget to LIKE and SHARE the video. It means ALOT! 😀

Glad it worked!

Glad it helped!

Glad to help!

Glad it worked!

Glad it worked!

No problem 😊

Glad it worked!

My Chrysler 300 has that same issue 😂

I'm glad the soft reset hack helped fix the music issue on your Uconnect system! Sometimes a simple reset can work wonders. If you have any other questions or need further assistance, feel free to reach out. Keep enjoying your music and drive safe! 🎶🚗

Glad it helped!

Great question, it does sound like a more serious issue happening. My last one we had we had to replace the whole cluster

It may, but im not 100% sure

You're welcome!

Glad it helped! If you have have any questions let me know!

Should fix majority of the bugs your system is experiencing

It Does NVM THANK YOU

Glad it worked!

Glad it worked for you my friend!

It may correct the issue if it's software but if it's hardware issue it will not

@@CarlsCarCorner It worked!! Thanks man 👍👍

Hopefully you got it all sorted out!

Yes it should!

@@CarlsCarCorner Unfortunately it didn't work 😔

If you press the volume button slightly before the tune button it will power it off

Same

what's the issue you're trying to correct?

Same

Glad it worked my friend! Thanks for the comment. Subscribe for more videos!

Glad to hear!

It may correct that issue,

Yes it should!

Glad it helped! Don't forget to LIKE and SUBSCRIBE for more helpful videos!

Exactly

If you press the volume in slightly before the tune it will power it off

Hi MillerTime, it should definitely fix the issue!

Hey there! It can be frustrating when updates aren't readily available. Have you tried reaching out to Garmin's customer support? They might have alternative solutions or suggestions on how to keep your navigation system up to date. Feel free to share your experience or ask for more advice from fellow Charger owners in the community. Wishing you smooth travels! 🚗🗺️

Resetting the Uconnect system in a Dodge vehicle can help resolve minor issues and improve its performance. Here are the general steps to reset Uconnect: **Note**: The specific steps may vary slightly depending on your Dodge model and the Uconnect version installed. Refer to your vehicle's owner's manual for model-specific instructions. 1. **Turn Off the Engine**: Ensure your vehicle's engine is turned off. 2. **Open the Driver's Side Door**: This step is to ensure that the vehicle's electrical systems are fully powered down. 3. **Wait for a Few Minutes**: Allow a few minutes for all vehicle systems to completely power down. 4. **Restart the Engine**: Turn on the engine and allow the Uconnect system to boot up. This may take a few moments. 5. **Perform a Master Reset (if needed)**: If you're experiencing persistent issues with your Uconnect system, you can perform a master reset. To do this, access the "Settings" menu on the Uconnect touchscreen. Then, navigate to the "System Information" or "Device Information" option and select "Reset." Follow the on-screen prompts to confirm the reset. 6. **Check for Software Updates**: After the reset, consider checking for any available software updates for your Uconnect system. You can do this by visiting the official Uconnect website and following their instructions for updates. 7. **Reconnect Your Devices**: If you had previously paired devices (e.g., smartphones) with your Uconnect system, you may need to re-pair them after the reset. Go to the Uconnect settings and follow the instructions for pairing your devices. 8. **Test the System**: After completing the reset and any necessary updates or re-pairing, test your Uconnect system to ensure that the issues have been resolved. If your Uconnect problems persist despite resetting and updating the system, it's a good idea to contact your local Dodge dealership or Uconnect customer support for further assistance. They can provide specific guidance and potentially schedule a service appointment if necessary.

Glad it worked! 😁

It potentially should, depending on several factors but try it out!

Did it fix your back up cam?

I appreciate your feedback on the Uconnect reset tutorial. For a 2015 Chrysler 200, if the method didn't work, you might consider checking if there's a software update for the Uconnect system or reaching out to Chrysler's customer support for additional assistance.

Hi there! Having trouble with your GPS on UConnect can be frustrating, but don't worry, there might be a solution. First, make sure your Charger's UConnect system is properly connected to a compatible smartphone that has GPS capabilities. If you're still facing issues, try resetting your UConnect system. Here's how: 1. Start your vehicle. 2. Press the 'Apps' button on your UConnect touchscreen. 3. Scroll to the 'Settings' option and select it. 4. Scroll to the 'System' option and select 'Reset to Factory Settings.' 5. Follow the prompts to confirm the reset. After the reset, your UConnect system should restart, and you can try using the GPS again. If the problem persists, it might be a good idea to reach out to your local dealership or UConnect support for more specific assistance, as certain models may have different features and compatibility requirements. Hope this helps!

What's the issue you're trying to correct?

I’m not able to connect my phone to the head unit. Tried all the tips I can find on RU-vid and Forums.

You may be clicking the power off button sooner than the tune button

You may need a new head unit replacement. I've seen that happen several times

Yes it is, depending on the issue you're trying to correct

Hi Hayley, If you're Dodge Dart has the Uconnect mode yes that should correct and issues going on with Uconnect.

This didn't work on my 2015 dodge dart 😔

@@CarlsCarCornerdidnt work for 2012 Journey

You may need to bring it into your local dealer as it seems to be something this reset won't correct

Glad it helped you out! And thanks for watching Ramsay!

Glad it worked!

Hmmm, you may need a software update

You can also try with the Jeep turned on quickly pressing the two buttons at the same time! Let me know if that worked for you!

Mine didn’t wen I pre with it just turn off the screen

​@@rickstar524same here 2018 charger

Did u figure anything out?? My screen works but like your half of my screen is out 2018 jeep renegade

Do you have it in accessory mode?

Resetting your Uconnect system should not erase your SiriusXM radio stations or presets. These settings are typically stored separately and should remain intact even after a system reset. However, it's essential to note that while a Uconnect reset typically doesn't affect your SiriusXM settings, there may be exceptions or variations depending on the specific Uconnect system and vehicle model. To be on the safe side, you can jot down your SiriusXM presets or take a photo of them before performing a reset, just in case.

@@CarlsCarCorner All good. No loss. The reset that worked for me was finger in the top right screen for 15 seconds.

Glad to hear my friend!

What’s the issue with your car?

Did you find a way I got a 2011 and nothing is working either for me

@@CarlsCarCorner My Bluetooth was stuck in a connecting phase, even when I turned it on & turned it off. It wouldn’t allow me to connect my phone or use anything regarding the Bluetooth, but it is working now.

@@JustAthena1 I didn’t find a concrete way to fix it. I drove off to a different location, turned my car off for at least 5 mins, started it back up, and finally my radio/ Bluetooth was reset.