A Step-By-Step guide to the installation of CNC Adjustable Shift Clip-on Handle Bars 55mm Handlebars Brand: Savage The handlebars can be purchased from the following link: www.ebay.com.au/itm/Adjustabl...
Thanks for the video. Helped me a lot with the conversion of my R9T racer. These small screws on the switches, then one hidden. I would never have found it. Thank you!
Good set of videos, mate. Very useful as I pick up my bike tomorrow and want to do some of this stuff myself. I know you will have thought of this but you really need to get that swingarm powder coated in black.
Josh, no adaptor required. I used the OEM mushroom bar ends to lock in the mirrors. The locking is achieved by the push action from the mushrooms + the tightening of the mirrors screws. It gets a bit tricky with the throttle bar, because if u tighten too much, the throttle will lock. You just have to find the sweet spot were the mirrors are tight and the throttle is free to move back and forth
Is it true that when you switch clip ons, the turning radius of your bike is limited since the clip ons would hit the gas tank when you turn to the extreme left/right direction?
How high were the risers or what height did you set them at? Also how does it affect your riding position (ergonomics) do you recommend this set up for commuting (60 miles one way)?
60 miles is a bit too long for this riding position. After 20 miles u'll start feeling back pain. My commute was about 10 miles so it was fine Height wise, I've put them pretty low, u can adjust the height up to 5mm lower than the standard handle bars height
The forks are the trickiest part You will need to disassemble the gold tubes, anodise them, the assemble them again. It's gonna be a very messy job if you're not familiar with forks rebuild. I opted for wrapping them, but you'll need to do it with the forks are installed in the triple tree clamp, otherwise, the wrap will get scratched when putting the forks back into the clamp Option 3, buy black forks, but they cost a fortune!
Thanks mate. The majority of the items were purchased from eBay or AliExpress The guage: #Aliexpress AU $87.70 | Oil Temperature Gauge - Celsius BLACK/SILVER / R NineT Scrambler for BMW R NINET R9T Roadster Scrambler Pure a.aliexpress.com/_dSOHA8I
@@ahmadsammani2704 I already installed clip ons and it's really not that bad, 2 hour trips are no problem, although I don't have any back pain just my wrists start to hurt a bit