No video :(

R32 GTR Nissan Skyline 370z Brake upgrade destroyed trying in install Z1 caliper adapter

Подписаться 15 тыс.

Просмотров 1,5 тыс.

50% 1

After 2 years of down time, it's nice to start working on my Nissan Skyline. Time to upgrade to a big brake kit on my R32 GTR. I ran into some problems installing the Z1 Motorsports 300zx rear calipers adapter bracket and destroyed one of my Akebono 370z sport brakes rear calipers in my attempt to install the new brake set up.
370z sport brakes on Ebay ebay.us/pscUmg
Recommended Tools I use
Milwaukee impact wrench amzn.to/3rxgmEt
QuickJacks 5000 lift system amzn.to/3kg39yk
Dremel amzn.to/48E4piJ
Angle Grinder amzn.to/3S30vKS
Angle Grinder sanding discs amzn.to/3H7G9di
Loctite amzn.to/3tvrENm
Sparco Sweatshirt amzn.to/3mhxm1D
Z1 Motorsports Caliper Adapters www.z1motorspo...
370z Sport Rear OEM rotors www.z1motorspo...
370z Z1 Sport SS brake lines www.z1motorspo...
Parts in my Build
RB26 PRP block brace www.platinumra...
RB26 PRP spline drive oil pump www.platinumra...
HKS RB26DETT 2.8L full STEP2 stroker kit bit.ly/3ElaULG
HKS Step 1 VCAM bit.ly/2ZEcOlt
HKS Step 2 VCAM bit.ly/3fFyIPX
HKS VCAM PRO bit.ly/3SHLlZA
HKS VCAM crank angle sensor bit.ly/3SE0smE
HKS Step 2 VCAM 50 degree VTC gear up bit.ly/3rFtYMR
HKS Step 2 VCAM camshaft upgrade bit.ly/3IjGj1e
HKS Step 2 Valve Springs bit.ly/3CCTjh5
HKS Valve stem seals bit.ly/3M8aJVU
HKS adjustable exhaust cam gear bit.ly/3SExp2h
HKS Step 2 272 exhaust cam bit.ly/3T0thJP
ARC FMIC bit.ly/3ygjIys
HKS High power silent exhaust bit.ly/3T2Wzrs
HKS high flow cat bit.ly/3ygkPhC
HKS downpipe bit.ly/3rwXUuH
HKS hard piping bit.ly/35DkQif
HKS air flow less adapter bit.ly/3ElalBj
NISMO Timing belt bit.ly/2Rvj3n6
NISMO Fuel Pump bit.ly/3izF4wZ
HKS EVC 7 bit.ly/2FHXg8R
My Camera Gear
Editing computer Apple 2023 MacBook Pro Laptop M2 amzn.to/45soiIS
Main Camera Sony A7IV amzn.to/3vCBdsl
Main Lens Sony 10-18 amzn.to/3HTbLBf
Low light wide angle lens Sony 11mm F1.8 amzn.to/3YrPAeA
Full frame lens Sony 28-70mm amzn.to/3Krddit
GoPro Hero 11 BLK amzn.to/3HVuNZF
DJI RS3 mini Gimbal amzn.to/3l5CkO6
DJI Drone amzn.to/3lnDkLF
More JDM RHD GTR content
RB26 machine shop EP1 • EP1 RB26 machining pro...
Artec Performance manifold • Artec Performance RB M...
PRP Block brace and spline drive oil pump • RB26 PRP block brace S...
RB28 HKS step 2 stroker kit • Unboxing HKS 2.8 Step ...
R's Day 2022 • Most Expensive Car Nis...
RB26 tear down EP10 • Most Expensive Car Nis...
➢SUBSCRIBE: / jdmrighthanddrive
⚙️ TOOLS & SERVICES I CURRENTLY USE & RECOMMEND ⚙️
👉🏼 Keyword research tool for RU-vid (TubeBuddy)-www.tubebuddy....
👉🏼Music I use in my RU-vid videos (Epidemic Sound), sign up for a 30-day free trial here www.epidemicso...
👉🏼Logo create your brand for your business (Fiverr Pro) go.fiverr.com/...
More JDM RHD
Follow me on Instagram / jdmrighthanddrive
Facebook / joshua.fenske.77
#gtr #rb26dett #nissanskyline #wrx #jdmcars #jdmlife #righthanddrive #jdmrhd #carchannel #rhd #fa24 #perrin #rb26dett #howto
BNR32 factory service manual link below
www.skyline.se/...
All clickable links in description help to support my channel via affiliate commissions paid by sellers. Thanks for your support.

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@BrianCrofoot 7 месяцев назад

That’s a bummer about the brake kit not fitting! I literally just finished my big brake kit on my R33 GTR this week. Used Eximious Custom parts brackets to mount E55 AMG Brembo 8 piston front and Charger SRT 4 piston rear Brembos. 370z sport rotors all the way around. His kit was awesome. The front bolted right on after trimming the dust shields, but the rears required some pretty hefty trimming of the caliper. Best of luck! I can’t wait to see your build up and going! Building a Nitto 2.8/PPG for my R33 with lots of the same parts. PRP block brace, etc! I JUST got my engine back from the machine shop!

@JDMRightHandDrive 7 месяцев назад

That's awesome to hear on your brake kit fitment. Just wondering in comparison what the cost of your brake kit was? Mine was about $2300+tax or so. Would love to see some pics of your kit. DM me on instagram. Thanks

@BrianCrofoot 7 месяцев назад

@@JDMRightHandDrive man I couldn’t believe I found AMG 8 piston calipers for $350! All in my brake kit was about $1500. I sold my factory 33gtr Brembos for $1200! I had to sand and paint my calipers by hand, and I bought really cheap DetroitAxle rotors just to see how everything fit, which I might upgrade later. All in, I cannot complain for only spending a few hundred bucks! Your car is going to be sick man! Keep crushing it!

@marquelmarshall6690 6 месяцев назад

the akebono z1 kit is better as far as fitment. You won’t have to grind the rear caliper at all. But for the front you’ll have to either grind the adapter bracket about 11mm or add an 11mm spacer so the caliper arm fits in between the rotor and mounting bracket.

@eminye1 7 месяцев назад

Hope you had a great Christmas, all the best for this year.

@JDMRightHandDrive 7 месяцев назад

Thanks so much, Merry Christmas and Happy New Year to you and your family as well.

@GTRPSI 7 месяцев назад

I made my own kit for myself using 8 Piston front and 4 piston rear from a E55 AMG, i remember when i was making the rear brackets that they needed a notch to clear the handbrake cable. I noticed when you were fitting yours on that the cutout notch was in the wrong place, pointing (in my view) to you were fitting the wrong side bracket on, i think the other side bracket should be used and the cutout positioned to clear the handbrake cable. Try it to see how it bolts up....

@claygrams9695 7 месяцев назад

You would have hoped that Z1 would have planned to offer more support for the r32/33’s by now. Some of the setups are nice (especially the two piece rotors) but they can’t even include full specs of their rotors (diameter, thickness, etc). If I find an answer I’ll toss it your way bro

@JDMRightHandDrive 7 месяцев назад

Thanks for the support. Luckily so many people reached out to me on IG and FB. I have Detailed pictures of the caliper machining. I was on the right track, I just needed to go deeper into the caliper. Also was given detailed images for the front knuckles and bracket fitment. I plan to install the front brakes this Monday. I love all the support from all of you guys. Thanks for watching.

@shiloh5199 7 месяцев назад

A big brake from a reputable manufacturer shouldn't need grinding, maybe you have the wrong kit or your R32 has a different variation due to vehicle trim. Those Nismo rims are sweet

@JDMRightHandDrive 7 месяцев назад

I love the LMGT4 wheels too, or were you talking about the 350z NISMO wheels?

@d3gangsta 7 месяцев назад

Surprised you didn't do the Endless x HKS kit!

@JDMRightHandDrive 7 месяцев назад

I would love to, but I think that kit is around 7k or so. Out of my budget right now for sure with trying to finish up the engine right now. Good suggestion though. 👍

@casefc3s 7 месяцев назад

what's the width of the +35 offset wheels, was surprised they looked that flush. lotsa wheel options are always nice! bummer about the Z1 setup, i've had a lot of good experiences with them over the years, wish i had some suggestions for ya!

@JDMRightHandDrive 7 месяцев назад

Those Volk CE28's are 18x9+35 on a 265 35 18 tire. The wide tire width helps to fill up the wheel gap. These wheels don't correctly up front and contact the sway bar when turning to full lock out. I have been buying stuff from Z1 since 2010 and this is the 1st problem I have ever experienced with one of their products. Thanks for watching and leaving a comment.

@casefc3s 7 месяцев назад

@@JDMRightHandDrive thanks for the deets!

@davephou 7 месяцев назад

I have a feeling if you got allen head bolts for the bracket you wouldn't have needed to grind that much away. The allen head is much smaller than the stock bolt. Just a thought.

@levywood4417 7 месяцев назад

I still need to pick up a few parts to do this same brake swap on my GTR. I’m very interested to see what you find out.

@tahoeman1967 7 месяцев назад

Hey Josh have you checked you tube for other rear big brake upgrades the r32 I’m sure there has to be something maybe that would get you in the direction you want

@JDMRightHandDrive 7 месяцев назад

I looked and only found the one video using the Concept Z brackets. I will do so more research and hopefully I hear back from Z1 sooner than later.🔧