R6 motorcycle cylinder misfire power loss fault finding spark check diagnosis

Подписаться 10 тыс.

Просмотров 104 тыс.

50% 1

My yamaha yzf r6 5eb 1999 suddenly lost power on the motorway and started farting and missing when exceeding 4.5k rpm so I had to do some fault finding, checked the cylinders with the water check and cylinder 4 was not firing up! So done some coil and spark checks and all seems to be fine so the problem must be in the carbs!!
Yamaha r6 r1 honda cbr rr fireblade Suzuki gsxr Kawasaki ninja hayabusa

Опубликовано:

4 ноя 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@rickg.8231 2 года назад

I came across this same issue. Recently i was riding home from work it start missing. I did the same water test. I also did the same coil test with the cylinder i found to be dead..with spark. I swapped that coil with the one next to it, and the issue followed. Not the most scientific way of doing it. But i could safely eliminate a wiring issue, spark plug, valve, or injector issue on that cylinder. I replaced all the coils, as i figured it may just be firing weak, and it corrected the issue.

@azzkam8972 9 лет назад

Not yet mate! My next step is to take out the carbs and give them a good clean then balance and see what happens from there, Il try to post a few more vids as I go along.

@paulhartman7144 4 года назад

If you are checking cylinders a easy way is ...if you know 1 cylinder is not firing by using a wax candle or water . Switch coils from 1 cylinder to another Cylinder . and if cylinder that the 1 that was not getting hot is now getting hot and the 1 that was good is now not . You know right away coil is bad ( just another way to check coil.

@DizGuys 8 лет назад

Great vid man! V-helpful ;)

@nicholasalford8190 6 лет назад

i have an 02 yamaha r1 and its blowing air from tha left side of my motor some say it could be stuck valve some sat dropped valve but theres zero knocking idk what to do ans some say it could be a header gasket leak exhaust leak im like wtf is it

@LizardMane 6 лет назад

is this the same as a carburetor bike?

@jassin6470 9 лет назад

What was the resolution?

@MrFameone206 7 лет назад

thanks man that was helpful I'm just lost power yesterday and was thinking it was the carbs but didn't think about the spark plugs.. my project this Friday

@xanadursix5197 7 лет назад

Start with plugs. While there test your ignition coils see if they are up to spec. Xhamfe air filter while you are there and after that if all elae fails you need a valve adjustment.

@smegturbo 9 лет назад

Just had the exact same problem with my 99 R6,one branch of the manifold was not getting warm and the bike was running shit and backfiring on idle then it would eventually cut out,so changed the coil in the cylinder where the exhaust manifold was staying cold and put a new set of plugs in and its now spot on and running like a dream,was shitting myself it was going to be something more serious but a £80 fix sorted it :)

@TheMATTYB1234 9 лет назад

richard s your bike did not have the same problem. He said his was fine on idle and low revs.Your information might point someone in the wrong direction.Good you got yours sorted though.

@slidefiveup4897 8 лет назад

Hey I have a 89 cbr hurricane I understand you got your problem fixed I'm going through the same I will try what you have posted here but I need some info hit me up hennessyz305@gmail.com

@slidefiveup4897 8 лет назад

Can you tell me more about how you change the coil was it the coil pack ?

@aalioo 9 лет назад

were you able to find your problem? Or are you still looking?

@therider3939 6 лет назад

My problem started after i had the de tps sensor broken and i put put another funny is i wiggle a bit the tps plug and gets better sometimes gets worse wtf

@stephenmontique8439 9 лет назад

Did you find the problem?

@azzkam8972 9 лет назад

Had low compression on one of the cylinders :-(

@650hpreventon 8 лет назад

whaya the difference between backfires and miss fire. i rode on my zx10r 1st gear on the highway using all the rpm. red line it. and i heard pop, like a gun fire. is this a back fire?

@650hpreventon 8 лет назад

is it ok to have it

@azzkam8972 9 лет назад

Reading didn't change after putting in a few drops of oil in cylinder so this indicates it may be a valve problem!!!

@azzkam8972 8 лет назад

Backfire is pretty normal on sports bikes when accelerating hard and then when you come off the throttle or pull the clutch you get deceleration "decel pop" but a misfire is totally different!! Basically when one or more of the spark plugs aren't firing properly you get a misfire resulting in loss of power and engine running really poor and rough idling.

@hamishdow2188 7 лет назад

Azz Kam I was having problems with my bike running really poorly when I got home from work last night I noticed flames coming from the exhaust which I quickly connected to unburnt fuel when I started it up today I noticed it was idling really badly and it's just occurred to me now that it may be a spark plug issue at any rate I'm going to keep trying different things until next week when I'm taking it into a mechanic for an engine tuning (which he said would be what would probably resolve the problem) which if I can resolve the problem if it's due to the spark plugs won't be needed

@user-bm7dn1vt1i 6 лет назад

Azz Kam

@wastemaintenancesolutions9407 3 года назад

@@hamishdow2188 did you figure this out I’m having exact same Problem

@BOSSMADE18 9 лет назад

what did you do to fix the problem?

@brianmeuse7595 4 года назад

This is a classic dirty carb problem. Stuck float needle I'm sure.

@azzkam8972 8 лет назад

Possibly

@azzkam8972 9 лет назад

And a compression test!!

@ranssom1 7 лет назад

wat about u adjust ur valve

@pavlikcambur4194 8 лет назад

so what was the problem ? can u watch my video and tell me if its the same problem

@jakobsinamon1683 7 лет назад

start fahrrrtin

@bosniansenad 6 лет назад

you have a problem with your 4th exhaust pipe? you make a video and everything but you don't tell if you fixed the problem? what was the problem??!!

@pavlikcambur4194 8 лет назад

you got a video how it was power lossin?

@mikepappacoda8222 7 лет назад

what was the problem with the misfire

@scottyglenn4364 5 лет назад

why can't anyone tell me how to fix mygs850,wont start and backfiring through exhaust

@JoeLouisPepsi 3 года назад

Lol I have a GS850 with this exact problem. This video was not helpful at all. How did he solve!?!

@miguelcote6116 5 лет назад

What happened after this video ? Was ur engine case cracked or something?

@azzkam8972 5 лет назад

Miguel Côté I believe it was the piston rings unfortunately I couldn’t carry on the project at that time and had to let it go to someone else who has more mechanical knowledge

@Dj_Caribe 9 лет назад

You might need a valve adjustment

@Flippinloon 7 лет назад

Hey man did you ever find out what the problem was as im having a similar problem.

@azzkam8972 7 лет назад

4James4root nah bro my problem was most likely something to do with my valves

@lucidgravitationalpull2234 5 лет назад

Wow didnt know it was that simple to check spark xD ! Hey and for sure it will be your carbeurator!!!! I suggest you just get it rebuild its super cheap and easy to do once its out

@DobermanCrew 8 лет назад

i have the same problem when accelerating my 2001 r1 really hard it loses power it like farts i let go of gas and do it again and its ok .. im gonna try cleaning the carburator .. never did anything on a bike in my life but with youtube and a friend with some experience in mechanics i think we will manage

@pavlikcambur4194 8 лет назад

+The Royal Knights MC did u fix ur bike ? i got the same problem i think

@cuffydaniels3169 8 лет назад

hey + the Royal Knight MC I have a 2001 r6 and i am having the same problem

@DobermanCrew 8 лет назад

+Cuffy Daniels the clutch needed adjusting for my Bike .... So I was lucky

@keepitmoving5440 8 лет назад

when you syc 'ed the carbs, you sure you didnt adjust fuel screws by mistake... or vacuum pipes on correctly.. Just tryin to help

@BigDreamsLilBike Год назад

Hey Keepitmoving , quick question. Once you clean your carbs and set your mixture screw. Should you sync the carbs or it doesn’t matter? I cleaned my carbs and set my mixture screw. But now my bike runs like 💩. It idles perfect.But the acceleration is not there. Any suggestions?

@Foysol27 6 лет назад

Did you find the actual problem please let me know

@azzkam8972 6 лет назад

Nurul Foysal I think it was a bent valve but I had to sell the bike

@thesaabisturbo 6 лет назад

I had that issue on my 03 R6 and it was the coil on cyl 2. It cane down to finnaly changing rhem all out and then one at a time after i had fixed it with the 4 new ones, i did one at a time just to find the old bad one. Took them getting hot to mess up

@manxracer5541 5 лет назад

Levi Bridwell had the exact same issue on my R6 race bike ran sweet when cold-cool once upto temp ran like a pig trouble hot starting... new coils probs fixed....

@thesaabisturbo 5 лет назад

Ghost Rider gotta watch for the output line off the fuel pump kinked shut..

@simontempleman153 5 лет назад

Azz, ive got the same issue with my r6 2002, cylinder 1 down, checked plugs and coil all fine so did cleaning the carbs in your following video fix the issue? stuck as to which way to go now so hoping for some feedback? cheers

@azzkam8972 5 лет назад

simon templeman cleaning the carbs didn’t fix the issue unfortunately for me I had a valve problem

@azzkam8972 8 лет назад

My problem was most likely burnt or bent valves.

@christoandries7117 7 лет назад

Azz Kam how does that happen..and what does your engine sound like

@azzkam8972 7 лет назад

I presume when you don't warm up your bike properly and just full throttle to 160mph!!! I use to work just off a motorway and at times I use to just start my bike and jump straight onto it and full throttle😑 that's my guess.

@azzkam8972 8 лет назад

I can't really tell what your problem may be by just watching your vid! You will have to make a more comprehensive video with all your issues and I'm sure there will be someone who can identify the most likely causes and then it will be a elimination process.

@user-bm7dn1vt1i 6 лет назад

Hello tell me how to solve the problem, I have the same thing and still badly runs on hot until you add the gas does not start.